ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

23 files changed, 0 insertions, 9188 deletions

diff --git a/cpu/mpc8xx/Makefile b/cpu/mpc8xx/Makefile
deleted file mode 100644
index 5f70459..0000000
--- a/cpu/mpc8xx/Makefile
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-# CFLAGS += -DET_DEBUG
-
-LIB	= $(obj)lib$(CPU).a
-
-START-y	+= start.o
-START-y	+= kgdb.o
-COBJS-y	+= bedbug_860.o
-COBJS-y	+= commproc.o
-COBJS-y	+= cpu.o
-COBJS-y	+= cpu_init.o
-COBJS-y	+= fec.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS-y	+= i2c.o
-COBJS-y	+= interrupts.o
-COBJS-y	+= lcd.o
-COBJS-y	+= scc.o
-COBJS-y	+= serial.o
-COBJS-y	+= speed.o
-COBJS-y	+= spi.o
-COBJS-y	+= traps.o
-COBJS-y	+= upatch.o
-COBJS-y	+= video.o
-SOBJS-y	+= plprcr_write.o
-
-SRCS	:= $(START-y:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-START	:= $(addprefix $(obj),$(START-y))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(obj)kgdb.o
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mpc8xx/bedbug_860.c b/cpu/mpc8xx/bedbug_860.c
deleted file mode 100644
index 0308bbb..0000000
--- a/cpu/mpc8xx/bedbug_860.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * Bedbug Functions specific to the MPC860 chip
- */
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <bedbug/bedbug.h>
-#include <bedbug/regs.h>
-#include <bedbug/ppc.h>
-#include <bedbug/type.h>
-
-#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_8xx)
-
-#define MAX_BREAK_POINTS 2
-
-extern CPU_DEBUG_CTX bug_ctx;
-
-void bedbug860_init __P((void));
-void bedbug860_do_break __P((cmd_tbl_t*,int,int,char*[]));
-void bedbug860_break_isr __P((struct pt_regs*));
-int  bedbug860_find_empty __P((void));
-int  bedbug860_set __P((int,unsigned long));
-int  bedbug860_clear __P((int));
-
-
-/* ======================================================================
- * Initialize the global bug_ctx structure for the MPC860.  Clear all
- * of the breakpoints.
- * ====================================================================== */
-
-void bedbug860_init( void )
-{
-  int	i;
-  /* -------------------------------------------------- */
-
-  bug_ctx.hw_debug_enabled = 0;
-  bug_ctx.stopped = 0;
-  bug_ctx.current_bp = 0;
-  bug_ctx.regs = NULL;
-
-  bug_ctx.do_break   = bedbug860_do_break;
-  bug_ctx.break_isr  = bedbug860_break_isr;
-  bug_ctx.find_empty = bedbug860_find_empty;
-  bug_ctx.set        = bedbug860_set;
-  bug_ctx.clear      = bedbug860_clear;
-
-  for( i = 1; i <= MAX_BREAK_POINTS; ++i )
-    (*bug_ctx.clear)( i );
-
-  puts ("BEDBUG:ready\n");
-  return;
-} /* bedbug_init_breakpoints */
-
-
-
-/* ======================================================================
- * Set/clear/show one of the hardware breakpoints for the 860.  The "off"
- * string will disable a specific breakpoint.  The "show" string will
- * display the current breakpoints.  Otherwise an address will set a
- * breakpoint at that address.  Setting a breakpoint uses the CPU-specific
- * set routine which will assign a breakpoint number.
- * ====================================================================== */
-
-void bedbug860_do_break (cmd_tbl_t *cmdtp, int flag, int argc,
-			 char *argv[])
-{
-  long		addr = 0;       /* Address to break at  */
-  int		which_bp;       /* Breakpoint number    */
-  /* -------------------------------------------------- */
-
-  if (argc < 2)
-  {
-    cmd_usage(cmdtp);
-    return;
-  }
-
-  /* Turn off a breakpoint */
-
-  if( strcmp( argv[ 1 ], "off" ) == 0 )
-  {
-    if( bug_ctx.hw_debug_enabled == 0 )
-    {
-      printf( "No breakpoints enabled\n" );
-      return;
-    }
-
-    which_bp = simple_strtoul( argv[ 2 ], NULL, 10 );
-
-    if( bug_ctx.clear )
-      (*bug_ctx.clear)( which_bp );
-
-    printf( "Breakpoint %d removed\n", which_bp );
-    return;
-  }
-
-  /* Show a list of breakpoints */
-
-  if( strcmp( argv[ 1 ], "show" ) == 0 )
-  {
-    for( which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp )
-    {
-
-      switch( which_bp )
-      {
-      case 1: addr = GET_CMPA(); break;
-      case 2: addr = GET_CMPB(); break;
-      case 3: addr = GET_CMPC(); break;
-      case 4: addr = GET_CMPD(); break;
-      }
-
-      printf( "Breakpoint [%d]: ", which_bp );
-      if( addr == 0 )
-	printf( "NOT SET\n" );
-      else
-	disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
-    }
-    return;
-  }
-
-  /* Set a breakpoint at the address */
-
-  if( !isdigit( argv[ 1 ][ 0 ]))
-  {
-    cmd_usage(cmdtp);
-    return;
-  }
-
-  addr = simple_strtoul( argv[ 1 ], NULL, 16 ) & 0xfffffffc;
-
-  if(( bug_ctx.set ) && ( which_bp = (*bug_ctx.set)( 0, addr )) > 0 )
-  {
-    printf( "Breakpoint [%d]: ", which_bp );
-    disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
-  }
-
-  return;
-} /* bedbug860_do_break */
-
-
-
-/* ======================================================================
- * Handle a breakpoint.  First determine which breakpoint was hit by
- * looking at the DeBug Status Register (DBSR), clear the breakpoint
- * and enter a mini main loop.  Stay in the loop until the stopped flag
- * in the debug context is cleared.
- * ====================================================================== */
-
-void bedbug860_break_isr( struct pt_regs *regs )
-{
-  unsigned long	addr;     /* Address stopped at   */
-  unsigned long	cause;     /* Address stopped at   */
-  /* -------------------------------------------------- */
-
-  cause = GET_ICR();
-
-  if( !(cause & 0x00000004)) {
-    printf( "Not an instruction breakpoint (ICR 0x%08lx)\n", cause );
-    return;
-  }
-
-  addr = regs->nip;
-
-  if( addr == GET_CMPA() )
-  {
-    bug_ctx.current_bp = 1;
-  }
-  else if( addr == GET_CMPB() )
-  {
-    bug_ctx.current_bp = 2;
-  }
-  else if( addr == GET_CMPC() )
-  {
-    bug_ctx.current_bp = 3;
-  }
-  else if( addr == GET_CMPD() )
-  {
-    bug_ctx.current_bp = 4;
-  }
-
-  bedbug_main_loop( addr, regs );
-  return;
-} /* bedbug860_break_isr */
-
-
-
-/* ======================================================================
- * Look through all of the hardware breakpoints available to see if one
- * is unused.
- * ====================================================================== */
-
-int bedbug860_find_empty( void )
-{
-  /* -------------------------------------------------- */
-
-  if( GET_CMPA() == 0 )
-    return 1;
-
-  if( GET_CMPB() == 0 )
-    return 2;
-
-  if( GET_CMPC() == 0 )
-    return 3;
-
-  if( GET_CMPD() == 0 )
-    return 4;
-
-  return 0;
-} /* bedbug860_find_empty */
-
-
-
-/* ======================================================================
- * Set a breakpoint.  If 'which_bp' is zero then find an unused breakpoint
- * number, otherwise reassign the given breakpoint.  If hardware debugging
- * is not enabled, then turn it on via the MSR and DBCR0.  Set the break
- * address in the appropriate IACx register and enable proper address
- * beakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug860_set( int which_bp, unsigned long addr )
-{
-  /* -------------------------------------------------- */
-
-  /* Only look if which_bp == 0, else use which_bp */
-  if(( bug_ctx.find_empty ) && ( !which_bp ) &&
-     ( which_bp = (*bug_ctx.find_empty)()) == 0 )
-  {
-    printf( "All breakpoints in use\n" );
-    return 0;
-  }
-
-  if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
-  {
-    printf( "Invalid break point # %d\n", which_bp );
-    return 0;
-  }
-
-  if( ! bug_ctx.hw_debug_enabled )
-  {
-    bug_ctx.hw_debug_enabled = 1;
-    SET_DER( GET_DER() | 0x00000004 );
-  }
-
-  switch( which_bp )
-  {
-  case 1:
-    SET_CMPA( addr );
-    SET_ICTRL( GET_ICTRL() | 0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */
-    break;
-
-  case 2:
-    SET_CMPB( addr );
-    SET_ICTRL( GET_ICTRL() | 0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */
-    break;
-
-  case 3:
-    SET_CMPC( addr );
-    SET_ICTRL( GET_ICTRL() | 0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */
-    break;
-
-  case 4:
-    SET_CMPD( addr );
-    SET_ICTRL( GET_ICTRL() | 0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */
-    break;
-  }
-
-  return which_bp;
-} /* bedbug860_set */
-
-
-
-/* ======================================================================
- * Disable a specific breakoint by setting the appropriate IACx register
- * to zero and claring the instruction address breakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug860_clear( int which_bp )
-{
-  /* -------------------------------------------------- */
-
-  if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
-  {
-    printf( "Invalid break point # (%d)\n", which_bp );
-    return -1;
-  }
-
-  switch( which_bp )
-  {
-  case 1:
-    SET_CMPA( 0 );
-    SET_ICTRL( GET_ICTRL() & ~0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */
-    break;
-
-  case 2:
-    SET_CMPB( 0 );
-    SET_ICTRL( GET_ICTRL() & ~0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */
-    break;
-
-  case 3:
-    SET_CMPC( 0 );
-    SET_ICTRL( GET_ICTRL() & ~0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */
-    break;
-
-  case 4:
-    SET_CMPD( 0 );
-    SET_ICTRL( GET_ICTRL() & ~0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */
-    break;
-  }
-
-  return 0;
-} /* bedbug860_clear */
-
-
-/* ====================================================================== */
-#endif
diff --git a/cpu/mpc8xx/commproc.c b/cpu/mpc8xx/commproc.c
deleted file mode 100644
index a87a0dc..0000000
--- a/cpu/mpc8xx/commproc.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-
-int dpram_init (void)
-{
-	/* Reclaim the DP memory for our use. */
-	gd->dp_alloc_base = CPM_DATAONLY_BASE;
-	gd->dp_alloc_top  = CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE;
-
-	return (0);
-}
-
-/* Allocate some memory from the dual ported ram.  We may want to
- * enforce alignment restrictions, but right now everyone is a good
- * citizen.
- */
-uint dpram_alloc (uint size)
-{
-	uint addr = gd->dp_alloc_base;
-
-	if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top)
-		return (CPM_DP_NOSPACE);
-
-	gd->dp_alloc_base += size;
-
-	return addr;
-}
-
-uint dpram_base (void)
-{
-	return gd->dp_alloc_base;
-}
-
-/* Allocate some memory from the dual ported ram.  We may want to
- * enforce alignment restrictions, but right now everyone is a good
- * citizen.
- */
-uint dpram_alloc_align (uint size, uint align)
-{
-	uint addr, mask = align - 1;
-
-	addr = (gd->dp_alloc_base + mask) & ~mask;
-
-	if ((addr + size) >= gd->dp_alloc_top)
-		return (CPM_DP_NOSPACE);
-
-	gd->dp_alloc_base = addr + size;
-
-	return addr;
-}
-
-uint dpram_base_align (uint align)
-{
-	uint mask = align - 1;
-
-	return (gd->dp_alloc_base + mask) & ~mask;
-}
-#endif	/* CONFIG_SYS_ALLOC_DPRAM */
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
-	volatile void *save_addr =
-		((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
-
-	*(volatile ulong *) save_addr = a;
-}
-
-ulong post_word_load (void)
-{
-	volatile void *save_addr =
-		((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
-
-	return *(volatile ulong *) save_addr;
-}
-
-#endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)( ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem +
-		                    CPM_BOOTCOUNT_ADDR );
-
-	save_addr[0] = a;
-	save_addr[1] = BOOTCOUNT_MAGIC;
-}
-
-ulong bootcount_load (void)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)( ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem +
-		                    CPM_BOOTCOUNT_ADDR );
-
-	if (save_addr[1] != BOOTCOUNT_MAGIC)
-		return 0;
-	else
-		return save_addr[0];
-}
-
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/cpu/mpc8xx/config.mk b/cpu/mpc8xx/config.mk
deleted file mode 100644
index 5540d65..0000000
--- a/cpu/mpc8xx/config.mk
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_8xx -ffixed-r2 -mstring -mcpu=860 -msoft-float
diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c
deleted file mode 100644
index 2eb848b..0000000
--- a/cpu/mpc8xx/cpu.c
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * m8xx.c
- *
- * CPU specific code
- *
- * written or collected and sometimes rewritten by
- * Magnus Damm <damm@bitsmart.com>
- *
- * minor modifications by
- * Wolfgang Denk <wd@denx.de>
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-#include <netdev.h>
-#include <asm/cache.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <libfdt_env.h>
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static char *cpu_warning = "\n         " \
-	"*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
-
-#if ((defined(CONFIG_MPC86x) || defined(CONFIG_MPC855)) && \
-     !defined(CONFIG_MPC862))
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
-	char *id_str =
-# if defined(CONFIG_MPC855)
-	"PC855";
-# elif defined(CONFIG_MPC860P)
-	"PC860P";
-# else
-	NULL;
-# endif
-	volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
-	uint k, m;
-	char buf[32];
-	char pre = 'X';
-	char *mid = "xx";
-	char *suf;
-
-	/* the highest 16 bits should be 0x0050 for a 860 */
-
-	if ((pvr >> 16) != 0x0050)
-		return -1;
-
-	k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
-	m = 0;
-	suf = "";
-
-	/*
-	 * Some boards use sockets so different CPUs can be used.
-	 * We have to check chip version in run time.
-	 */
-	switch (k) {
-	case 0x00020001: pre = 'P'; break;
-	case 0x00030001: break;
-	case 0x00120003: suf = "A"; break;
-	case 0x00130003: suf = "A3"; break;
-
-	case 0x00200004: suf = "B"; break;
-
-	case 0x00300004: suf = "C"; break;
-	case 0x00310004: suf = "C1"; m = 1; break;
-
-	case 0x00200064: mid = "SR"; suf = "B"; break;
-	case 0x00300065: mid = "SR"; suf = "C"; break;
-	case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
-	case 0x05010000: suf = "D3"; m = 1; break;
-	case 0x05020000: suf = "D4"; m = 1; break;
-		/* this value is not documented anywhere */
-	case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
-		/* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
-	case 0x08010004:		/* Rev. A.0 */
-		suf = "A";
-		/* fall through */
-	case 0x08000003:		/* Rev. 0.3 */
-		pre = 'M'; m = 1;
-		if (id_str == NULL)
-			id_str =
-# if defined(CONFIG_MPC852T)
-		"PC852T";
-# elif defined(CONFIG_MPC859T)
-		"PC859T";
-# elif defined(CONFIG_MPC859DSL)
-		"PC859DSL";
-# elif defined(CONFIG_MPC866T)
-		"PC866T";
-# else
-		"PC866x"; /* Unknown chip from MPC866 family */
-# endif
-		break;
-	case 0x09000000: pre = 'M'; mid = suf = ""; m = 1;
-		if (id_str == NULL)
-			id_str = "PC885"; /* 870/875/880/885 */
-		break;
-
-	default: suf = NULL; break;
-	}
-
-	if (id_str == NULL)
-		id_str = "PC86x";	/* Unknown 86x chip */
-	if (suf)
-		printf ("%c%s%sZPnn%s", pre, id_str, mid, suf);
-	else
-		printf ("unknown M%s (0x%08x)", id_str, k);
-
-
-#if defined(CONFIG_SYS_8xx_CPUCLK_MIN) && defined(CONFIG_SYS_8xx_CPUCLK_MAX)
-	printf (" at %s MHz [%d.%d...%d.%d MHz]\n       ",
-		strmhz (buf, clock),
-		CONFIG_SYS_8xx_CPUCLK_MIN / 1000000,
-		((CONFIG_SYS_8xx_CPUCLK_MIN % 1000000) + 50000) / 100000,
-		CONFIG_SYS_8xx_CPUCLK_MAX / 1000000,
-		((CONFIG_SYS_8xx_CPUCLK_MAX % 1000000) + 50000) / 100000
-	);
-#else
-	printf (" at %s MHz: ", strmhz (buf, clock));
-#endif
-	printf ("%u kB I-Cache %u kB D-Cache",
-		checkicache () >> 10,
-		checkdcache () >> 10
-	);
-
-	/* do we have a FEC (860T/P or 852/859/866/885)? */
-
-	immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
-	if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
-		printf (" FEC present");
-	}
-
-	if (!m) {
-		puts (cpu_warning);
-	}
-
-	putc ('\n');
-
-#ifdef DEBUG
-	if(clock != measure_gclk()) {
-	    printf ("clock %ldHz != %dHz\n", clock, measure_gclk());
-	}
-#endif
-
-	return 0;
-}
-
-#elif defined(CONFIG_MPC862)
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
-	volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
-	uint k, m;
-	char buf[32];
-	char pre = 'X';
-	char *mid = "xx";
-	char *suf;
-
-	/* the highest 16 bits should be 0x0050 for a 8xx */
-
-	if ((pvr >> 16) != 0x0050)
-		return -1;
-
-	k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
-	m = 0;
-
-	switch (k) {
-
-		/* this value is not documented anywhere */
-	case 0x06000000: mid = "P"; suf = "0"; break;
-	case 0x06010001: mid = "P"; suf = "A"; m = 1; break;
-	case 0x07000003: mid = "P"; suf = "B"; m = 1; break;
-	default: suf = NULL; break;
-	}
-
-#ifndef CONFIG_MPC857
-	if (suf)
-		printf ("%cPC862%sZPnn%s", pre, mid, suf);
-	else
-		printf ("unknown MPC862 (0x%08x)", k);
-#else
-	if (suf)
-		printf ("%cPC857TZPnn%s", pre, suf); /* only 857T tested right now! */
-	else
-		printf ("unknown MPC857 (0x%08x)", k);
-#endif
-
-	printf (" at %s MHz:", strmhz (buf, clock));
-
-	printf (" %u kB I-Cache", checkicache () >> 10);
-	printf (" %u kB D-Cache", checkdcache () >> 10);
-
-	/* lets check and see if we're running on a 862T (or P?) */
-
-	immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
-	if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
-		printf (" FEC present");
-	}
-
-	if (!m) {
-		puts (cpu_warning);
-	}
-
-	putc ('\n');
-
-	return 0;
-}
-
-#elif defined(CONFIG_MPC823)
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
-	volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
-	uint k, m;
-	char buf[32];
-	char *suf;
-
-	/* the highest 16 bits should be 0x0050 for a 8xx */
-
-	if ((pvr >> 16) != 0x0050)
-		return -1;
-
-	k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
-	m = 0;
-
-	switch (k) {
-		/* MPC823 */
-	case 0x20000000: suf = "0"; break;
-	case 0x20010000: suf = "0.1"; break;
-	case 0x20020000: suf = "Z2/3"; break;
-	case 0x20020001: suf = "Z3"; break;
-	case 0x21000000: suf = "A"; break;
-	case 0x21010000: suf = "B"; m = 1; break;
-	case 0x21010001: suf = "B2"; m = 1; break;
-		/* MPC823E */
-	case 0x24010000: suf = NULL;
-			puts ("PPC823EZTnnB2");
-			m = 1;
-			break;
-	default:
-			suf = NULL;
-			printf ("unknown MPC823 (0x%08x)", k);
-			break;
-	}
-	if (suf)
-		printf ("PPC823ZTnn%s", suf);
-
-	printf (" at %s MHz:", strmhz (buf, clock));
-
-	printf (" %u kB I-Cache", checkicache () >> 10);
-	printf (" %u kB D-Cache", checkdcache () >> 10);
-
-	/* lets check and see if we're running on a 860T (or P?) */
-
-	immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
-	if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
-		puts (" FEC present");
-	}
-
-	if (!m) {
-		puts (cpu_warning);
-	}
-
-	putc ('\n');
-
-	return 0;
-}
-
-#elif defined(CONFIG_MPC850)
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
-	volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
-	uint k, m;
-	char buf[32];
-
-	/* the highest 16 bits should be 0x0050 for a 8xx */
-
-	if ((pvr >> 16) != 0x0050)
-		return -1;
-
-	k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
-	m = 0;
-
-	switch (k) {
-	case 0x20020001:
-		printf ("XPC850xxZT");
-		break;
-	case 0x21000065:
-		printf ("XPC850xxZTA");
-		break;
-	case 0x21010067:
-		printf ("XPC850xxZTB");
-		m = 1;
-		break;
-	case 0x21020068:
-		printf ("XPC850xxZTC");
-		m = 1;
-		break;
-	default:
-		printf ("unknown MPC850 (0x%08x)", k);
-	}
-	printf (" at %s MHz:", strmhz (buf, clock));
-
-	printf (" %u kB I-Cache", checkicache () >> 10);
-	printf (" %u kB D-Cache", checkdcache () >> 10);
-
-	/* lets check and see if we're running on a 850T (or P?) */
-
-	immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
-	if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
-		printf (" FEC present");
-	}
-
-	if (!m) {
-		puts (cpu_warning);
-	}
-
-	putc ('\n');
-
-	return 0;
-}
-#else
-#error CPU undefined
-#endif
-/* ------------------------------------------------------------------------- */
-
-int checkcpu (void)
-{
-	ulong clock = gd->cpu_clk;
-	uint immr = get_immr (0);	/* Return full IMMR contents */
-	uint pvr = get_pvr ();
-
-	puts ("CPU:   ");
-
-	/* 850 has PARTNUM 20 */
-	/* 801 has PARTNUM 10 */
-	return check_CPU (clock, pvr, immr);
-}
-
-/* ------------------------------------------------------------------------- */
-/* L1 i-cache                                                                */
-/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB)              */
-/* the 860 P (plus) has 256 sets of 16 bytes in 4 ways (= 16 kB)             */
-
-int checkicache (void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	u32 cacheon = rd_ic_cst () & IDC_ENABLED;
-
-#ifdef CONFIG_IP86x
-	u32 k = memctl->memc_br1 & ~0x00007fff;	/* probe in flash memoryarea */
-#else
-	u32 k = memctl->memc_br0 & ~0x00007fff;	/* probe in flash memoryarea */
-#endif
-	u32 m;
-	u32 lines = -1;
-
-	wr_ic_cst (IDC_UNALL);
-	wr_ic_cst (IDC_INVALL);
-	wr_ic_cst (IDC_DISABLE);
-	__asm__ volatile ("isync");
-
-	while (!((m = rd_ic_cst ()) & IDC_CERR2)) {
-		wr_ic_adr (k);
-		wr_ic_cst (IDC_LDLCK);
-		__asm__ volatile ("isync");
-
-		lines++;
-		k += 0x10;				/* the number of bytes in a cacheline */
-	}
-
-	wr_ic_cst (IDC_UNALL);
-	wr_ic_cst (IDC_INVALL);
-
-	if (cacheon)
-		wr_ic_cst (IDC_ENABLE);
-	else
-		wr_ic_cst (IDC_DISABLE);
-
-	__asm__ volatile ("isync");
-
-	return lines << 4;
-};
-
-/* ------------------------------------------------------------------------- */
-/* L1 d-cache                                                                */
-/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB)              */
-/* the 860 P (plus) has 256 sets of 16 bytes in 2 ways (= 8 kB)              */
-/* call with cache disabled                                                  */
-
-int checkdcache (void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	u32 cacheon = rd_dc_cst () & IDC_ENABLED;
-
-#ifdef CONFIG_IP86x
-	u32 k = memctl->memc_br1 & ~0x00007fff;	/* probe in flash memoryarea */
-#else
-	u32 k = memctl->memc_br0 & ~0x00007fff;	/* probe in flash memoryarea */
-#endif
-	u32 m;
-	u32 lines = -1;
-
-	wr_dc_cst (IDC_UNALL);
-	wr_dc_cst (IDC_INVALL);
-	wr_dc_cst (IDC_DISABLE);
-
-	while (!((m = rd_dc_cst ()) & IDC_CERR2)) {
-		wr_dc_adr (k);
-		wr_dc_cst (IDC_LDLCK);
-		lines++;
-		k += 0x10;	/* the number of bytes in a cacheline */
-	}
-
-	wr_dc_cst (IDC_UNALL);
-	wr_dc_cst (IDC_INVALL);
-
-	if (cacheon)
-		wr_dc_cst (IDC_ENABLE);
-	else
-		wr_dc_cst (IDC_DISABLE);
-
-	return lines << 4;
-};
-
-/* ------------------------------------------------------------------------- */
-
-void upmconfig (uint upm, uint * table, uint size)
-{
-	uint i;
-	uint addr = 0;
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	for (i = 0; i < size; i++) {
-		memctl->memc_mdr = table[i];	/* (16-15) */
-		memctl->memc_mcr = addr | upm;	/* (16-16) */
-		addr++;
-	}
-}
-
-/* ------------------------------------------------------------------------- */
-
-#ifndef CONFIG_LWMON
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	ulong msr, addr;
-
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-	immap->im_clkrst.car_plprcr |= PLPRCR_CSR;	/* Checkstop Reset enable */
-
-	/* Interrupts and MMU off */
-	__asm__ volatile ("mtspr    81, 0");
-	__asm__ volatile ("mfmsr    %0":"=r" (msr));
-
-	msr &= ~0x1030;
-	__asm__ volatile ("mtmsr    %0"::"r" (msr));
-
-	/*
-	 * Trying to execute the next instruction at a non-existing address
-	 * should cause a machine check, resulting in reset
-	 */
-#ifdef CONFIG_SYS_RESET_ADDRESS
-	addr = CONFIG_SYS_RESET_ADDRESS;
-#else
-	/*
-	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
-	 * - sizeof (ulong) is usually a valid address. Better pick an address
-	 * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
-	 * "(ulong)-1" used to be a good choice for many systems...
-	 */
-	addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
-	((void (*)(void)) addr) ();
-	return 1;
-}
-
-#else	/* CONFIG_LWMON */
-
-/*
- * On the LWMON board, the MCLR reset input of the PIC's on the board
- * uses a 47K/1n RC combination which has a 47us time  constant.  The
- * low  signal on the HRESET pin of the CPU is only 512 clocks = 8 us
- * and thus too short to reset the external hardware. So we  use  the
- * watchdog to reset the board.
- */
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	/* prevent triggering the watchdog */
-	disable_interrupts ();
-
-	/* make sure the watchdog is running */
-	reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
-
-	/* wait for watchdog reset */
-	while (1) {};
-
-	/* NOTREACHED */
-	return 1;
-}
-
-#endif	/* CONFIG_LWMON */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- *
- * See sections 14.2 and 14.6 of the User's Manual
- */
-unsigned long get_tbclk (void)
-{
-	uint immr = get_immr (0);	/* Return full IMMR contents */
-	volatile immap_t *immap = (volatile immap_t *)(immr & 0xFFFF0000);
-	ulong oscclk, factor, pll;
-
-	if (immap->im_clkrst.car_sccr & SCCR_TBS) {
-		return (gd->cpu_clk / 16);
-	}
-
-	pll = immap->im_clkrst.car_plprcr;
-
-#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
-
-	/*
-	 * For newer PQ1 chips (MPC866/87x/88x families), PLL multiplication
-	 * factor is calculated as follows:
-	 *
-	 *		     MFN
-	 *	     MFI + -------
-	 *		   MFD + 1
-	 * factor =  -----------------
-	 *	     (PDF + 1) * 2^S
-	 *
-	 * For older chips, it's just MF field of PLPRCR plus one.
-	 */
-	if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
-		factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/
-			(PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S));
-	} else {
-		factor = PLPRCR_val(MF)+1;
-	}
-
-	oscclk = gd->cpu_clk / factor;
-
-	if ((immap->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
-		return (oscclk / 4);
-	}
-	return (oscclk / 16);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
-	int re_enable = disable_interrupts ();
-
-	reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
-	if (re_enable)
-		enable_interrupts ();
-}
-#endif /* CONFIG_WATCHDOG */
-
-#if defined(CONFIG_WATCHDOG) || defined(CONFIG_LWMON)
-
-void reset_8xx_watchdog (volatile immap_t * immr)
-{
-# if defined(CONFIG_LWMON)
-	/*
-	 * The LWMON board uses a MAX6301 Watchdog
-	 * with the trigger pin connected to port PA.7
-	 *
-	 * (The old board version used a MAX706TESA Watchdog, which
-	 * had to be handled exactly the same.)
-	 */
-# define WATCHDOG_BIT	0x0100
-	immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT);	/* GPIO     */
-	immr->im_ioport.iop_padir |= WATCHDOG_BIT;	/* Output   */
-	immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT);	/* active output */
-
-	immr->im_ioport.iop_padat ^= WATCHDOG_BIT;	/* Toggle WDI   */
-# elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
-	/*
-	 * The KUP4 boards uses a TPS3705 Watchdog
-	 * with the trigger pin connected to port PA.5
-	 */
-# define WATCHDOG_BIT	0x0400
-	immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT);	/* GPIO     */
-	immr->im_ioport.iop_padir |= WATCHDOG_BIT;	/* Output   */
-	immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT);	/* active output */
-
-	immr->im_ioport.iop_padat ^= WATCHDOG_BIT;	/* Toggle WDI   */
-# else
-	/*
-	 * All other boards use the MPC8xx Internal Watchdog
-	 */
-	immr->im_siu_conf.sc_swsr = 0x556c;	/* write magic1 */
-	immr->im_siu_conf.sc_swsr = 0xaa39;	/* write magic2 */
-# endif /* CONFIG_LWMON */
-}
-#endif /* CONFIG_WATCHDOG */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(SCC_ENET) && defined(CONFIG_CMD_NET)
-	scc_initialize(bis);
-#endif
-#if defined(FEC_ENET)
-	fec_initialize(bis);
-#endif
-	return 0;
-}
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
deleted file mode 100644
index eb0091b..0000000
--- a/cpu/mpc8xx/cpu_init.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-
-#include <mpc8xx.h>
-#include <commproc.h>
-
-#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
-    defined(CONFIG_SYS_SMC_UCODE_PATCH)
-void cpm_load_patch (volatile immap_t * immr);
-#endif
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * immr)
-{
-#ifndef CONFIG_MBX
-	volatile memctl8xx_t *memctl = &immr->im_memctl;
-# ifdef CONFIG_SYS_PLPRCR
-	ulong mfmask;
-# endif
-#endif
-	ulong reg;
-
-	/* SYPCR - contains watchdog control (11-9) */
-
-	immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
-
-#if defined(CONFIG_WATCHDOG)
-	reset_8xx_watchdog (immr);
-#endif /* CONFIG_WATCHDOG */
-
-	/* SIUMCR - contains debug pin configuration (11-6) */
-#ifndef CONFIG_SVM_SC8xx
-	immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
-#else
-	immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
-#endif
-	/* initialize timebase status and control register (11-26) */
-	/* unlock TBSCRK */
-
-	immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
-	immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
-
-	/* initialize the PIT (11-31) */
-
-	immr->im_sitk.sitk_piscrk = KAPWR_KEY;
-	immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
-	/* System integration timers. Don't change EBDF! (15-27) */
-
-	immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
-	reg = immr->im_clkrst.car_sccr;
-	reg &= SCCR_MASK;
-	reg |= CONFIG_SYS_SCCR;
-	immr->im_clkrst.car_sccr = reg;
-
-	/* PLL (CPU clock) settings (15-30) */
-
-	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-
-#ifndef CONFIG_MBX		/* MBX board does things different */
-
-	/* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
-	 * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
-	 * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF
-	 * field value.
-	 *
-	 * For newer (starting MPC866) chips PLPRCR layout is different.
-	 */
-#ifdef CONFIG_SYS_PLPRCR
-	if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK)
-	   mfmask = PLPRCR_MFACT_MSK;
-	else
-	   mfmask = PLPRCR_MF_MSK;
-
-	if ((CONFIG_SYS_PLPRCR & mfmask) != 0)
-	   reg = CONFIG_SYS_PLPRCR;			/* reset control bits   */
-	else {
-	   reg = immr->im_clkrst.car_plprcr;
-	   reg &= mfmask;			/* isolate MF-related fields */
-	   reg |= CONFIG_SYS_PLPRCR;			/* reset control bits   */
-	}
-	immr->im_clkrst.car_plprcr = reg;
-#endif
-
-	/*
-	 * Memory Controller:
-	 */
-
-	/* perform BR0 reset that MPC850 Rev. A can't guarantee */
-	reg = memctl->memc_br0;
-	reg &= BR_PS_MSK;	/* Clear everything except Port Size bits */
-	reg |= BR_V;		/* then add just the "Bank Valid" bit     */
-	memctl->memc_br0 = reg;
-
-	/* Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
-	 * preliminary addresses - these have to be modified later
-	 * when FLASH size has been determined
-	 *
-	 * Depending on the size of the memory region defined by
-	 * CONFIG_SYS_OR0_REMAP some boards (wide address mask) allow to map the
-	 * CONFIG_SYS_MONITOR_BASE, while others (narrower address mask) can't
-	 * map CONFIG_SYS_MONITOR_BASE.
-	 *
-	 * For example, for CONFIG_IVMS8, the CONFIG_SYS_MONITOR_BASE is
-	 * 0xff000000, but CONFIG_SYS_OR0_REMAP's address mask is 0xfff80000.
-	 *
-	 * If BR0 wasn't loaded with address base 0xff000000, then BR0's
-	 * base address remains as 0x00000000. However, the address mask
-	 * have been narrowed to 512Kb, so CONFIG_SYS_MONITOR_BASE wasn't mapped
-	 * into the Bank0.
-	 *
-	 * This is why CONFIG_IVMS8 and similar boards must load BR0 with
-	 * CONFIG_SYS_BR0_PRELIM in advance.
-	 *
-	 * [Thanks to Michael Liao for this explanation.
-	 *  I owe him a free beer. - wd]
-	 */
-
-#if defined(CONFIG_GTH)	        || \
-    defined(CONFIG_HERMES)	|| \
-    defined(CONFIG_ICU862)	|| \
-    defined(CONFIG_IP860)	|| \
-    defined(CONFIG_IVML24)	|| \
-    defined(CONFIG_IVMS8)	|| \
-    defined(CONFIG_LWMON)	|| \
-    defined(CONFIG_MHPC)	|| \
-    defined(CONFIG_PCU_E)	|| \
-    defined(CONFIG_R360MPI)	|| \
-    defined(CONFIG_RMU)		|| \
-    defined(CONFIG_RPXCLASSIC)	|| \
-    defined(CONFIG_RPXLITE)	|| \
-    defined(CONFIG_SPC1920)	|| \
-    defined(CONFIG_SPD823TS)
-
-	memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR0_REMAP)
-	memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
-	memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR5_REMAP)
-	memctl->memc_or5 = CONFIG_SYS_OR5_REMAP;
-#endif
-
-	/* now restrict to preliminary range */
-	memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
-	memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
-
-#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
-	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_IP860) /* disable CS0 now that Flash is mapped on CS1 */
-	memctl->memc_br0 = 0;
-#endif
-
-#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
-	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
-	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
-	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
-	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
-	memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
-	memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
-	memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
-	memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
-	memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
-	memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
-	memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
-	memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
-
-#endif /* ! CONFIG_MBX */
-
-	/*
-	 * Reset CPM
-	 */
-	immr->im_cpm.cp_cpcr = CPM_CR_RST | CPM_CR_FLG;
-	do {			/* Spin until command processed     */
-		__asm__ ("eieio");
-	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-#ifdef CONFIG_MBX
-	/*
-	 * on the MBX, things are a little bit different:
-	 * - we need to read the VPD to get board information
-	 * - the plprcr is set up dynamically
-	 * - the memory controller is set up dynamically
-	 */
-	mbx_init ();
-#endif /* CONFIG_MBX */
-
-#ifdef CONFIG_RPXCLASSIC
-	rpxclassic_init ();
-#endif
-
-#if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM)
-	rpxlite_init ();
-#endif
-
-#ifdef CONFIG_SYS_RCCR			/* must be done before cpm_load_patch() */
-	/* write config value */
-	immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
-#endif
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
-    defined(CONFIG_SYS_SMC_UCODE_PATCH)
-	cpm_load_patch (immr);	/* load mpc8xx  microcode patch */
-#endif
-}
-
-/*
- * initialize higher level parts of CPU like timers
- */
-int cpu_init_r (void)
-{
-#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
-	bd_t *bd = gd->bd;
-	volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base);
-#endif
-
-#ifdef CONFIG_SYS_RTCSC
-	/* Unlock RTSC register */
-	immr->im_sitk.sitk_rtcsck = KAPWR_KEY;
-	/* write config value */
-	immr->im_sit.sit_rtcsc = CONFIG_SYS_RTCSC;
-#endif
-
-#ifdef CONFIG_SYS_RMDS
-	/* write config value */
-	immr->im_cpm.cp_rmds = CONFIG_SYS_RMDS;
-#endif
-	return (0);
-}
diff --git a/cpu/mpc8xx/fdt.c b/cpu/mpc8xx/fdt.c
deleted file mode 100644
index 7130983..0000000
--- a/cpu/mpc8xx/fdt.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright 2008 (C) Bryan O'Donoghue
- *
- * Code copied & edited from Freescale mpc85xx stuff.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
-	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-		"timebase-frequency", get_tbclk(), 1);
-	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-		"bus-frequency", bd->bi_busfreq, 1);
-	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-		"clock-frequency", bd->bi_intfreq, 1);
-	do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency",
-		gd->brg_clk, 1);
-
-	/* Fixup ethernet MAC addresses */
-	fdt_fixup_ethernet(blob);
-
-	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-}
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
deleted file mode 100644
index 89c1ff9..0000000
--- a/cpu/mpc8xx/fec.c
+++ /dev/null
@@ -1,1026 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <commproc.h>
-#include <net.h>
-#include <command.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef	ET_DEBUG
-
-#if defined(CONFIG_CMD_NET) && \
-	(defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2))
-
-/* compatibility test, if only FEC_ENET defined assume ETHER on FEC1 */
-#if defined(FEC_ENET) && !defined(CONFIG_ETHER_ON_FEC1) && !defined(CONFIG_ETHER_ON_FEC2)
-#define CONFIG_ETHER_ON_FEC1 1
-#endif
-
-/* define WANT_MII when MII support is required */
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY)
-#define WANT_MII
-#else
-#undef WANT_MII
-#endif
-
-#if defined(WANT_MII)
-#include <miiphy.h>
-
-#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
-#error "CONFIG_MII has to be defined!"
-#endif
-
-#endif
-
-#if defined(CONFIG_RMII) && !defined(WANT_MII)
-#error RMII support is unusable without a working PHY.
-#endif
-
-#ifdef CONFIG_SYS_DISCOVER_PHY
-static int mii_discover_phy(struct eth_device *dev);
-#endif
-
-int fec8xx_miiphy_read(char *devname, unsigned char addr,
-		unsigned char  reg, unsigned short *value);
-int fec8xx_miiphy_write(char *devname, unsigned char  addr,
-		unsigned char  reg, unsigned short value);
-
-static struct ether_fcc_info_s
-{
-	int ether_index;
-	int fecp_offset;
-	int phy_addr;
-	int actual_phy_addr;
-	int initialized;
-}
-	ether_fcc_info[] = {
-#if defined(CONFIG_ETHER_ON_FEC1)
-	{
-		0,
-		offsetof(immap_t, im_cpm.cp_fec1),
-#if defined(CONFIG_FEC1_PHY)
-		CONFIG_FEC1_PHY,
-#else
-		-1,	/* discover */
-#endif
-		-1,
-		0,
-
-	},
-#endif
-#if defined(CONFIG_ETHER_ON_FEC2)
-	{
-		1,
-		offsetof(immap_t, im_cpm.cp_fec2),
-#if defined(CONFIG_FEC2_PHY)
-		CONFIG_FEC2_PHY,
-#else
-		-1,
-#endif
-		-1,
-		0,
-	},
-#endif
-};
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH  1520
-
-#define TX_BUF_CNT 2
-
-#define TOUT_LOOP 100
-
-#define PKT_MAXBUF_SIZE		1518
-#define PKT_MINBUF_SIZE		64
-#define PKT_MAXBLR_SIZE		1520
-
-#ifdef __GNUC__
-static char txbuf[DBUF_LENGTH] __attribute__ ((aligned(8)));
-#else
-#error txbuf must be aligned.
-#endif
-
-static uint rxIdx;	/* index of the current RX buffer */
-static uint txIdx;	/* index of the current TX buffer */
-
-/*
-  * FEC Ethernet Tx and Rx buffer descriptors allocated at the
-  *  immr->udata_bd address on Dual-Port RAM
-  * Provide for Double Buffering
-  */
-
-typedef volatile struct CommonBufferDescriptor {
-    cbd_t rxbd[PKTBUFSRX];		/* Rx BD */
-    cbd_t txbd[TX_BUF_CNT];		/* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx = NULL;
-
-static int fec_send(struct eth_device* dev, volatile void *packet, int length);
-static int fec_recv(struct eth_device* dev);
-static int fec_init(struct eth_device* dev, bd_t * bd);
-static void fec_halt(struct eth_device* dev);
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static void __mii_init(void);
-#endif
-
-int fec_initialize(bd_t *bis)
-{
-	struct eth_device* dev;
-	struct ether_fcc_info_s *efis;
-	int             i;
-
-	for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++) {
-
-		dev = malloc(sizeof(*dev));
-		if (dev == NULL)
-			hang();
-
-		memset(dev, 0, sizeof(*dev));
-
-		/* for FEC1 make sure that the name of the interface is the same
-		   as the old one for compatibility reasons */
-		if (i == 0) {
-			sprintf (dev->name, "FEC ETHERNET");
-		} else {
-			sprintf (dev->name, "FEC%d ETHERNET",
-				ether_fcc_info[i].ether_index + 1);
-		}
-
-		efis = &ether_fcc_info[i];
-
-		/*
-		 * reset actual phy addr
-		 */
-		efis->actual_phy_addr = -1;
-
-		dev->priv = efis;
-		dev->init = fec_init;
-		dev->halt = fec_halt;
-		dev->send = fec_send;
-		dev->recv = fec_recv;
-
-		eth_register(dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-		miiphy_register(dev->name,
-			fec8xx_miiphy_read, fec8xx_miiphy_write);
-#endif
-	}
-	return 1;
-}
-
-static int fec_send(struct eth_device* dev, volatile void *packet, int length)
-{
-	int j, rc;
-	struct ether_fcc_info_s *efis = dev->priv;
-	volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
-	/* section 16.9.23.3
-	 * Wait for ready
-	 */
-	j = 0;
-	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j>=TOUT_LOOP) {
-		printf("TX not ready\n");
-	}
-
-	rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
-	rtx->txbd[txIdx].cbd_datlen  = length;
-	rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
-	__asm__ ("eieio");
-
-	/* Activate transmit Buffer Descriptor polling */
-	fecp->fec_x_des_active = 0x01000000;	/* Descriptor polling active	*/
-
-	j = 0;
-	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
-#if defined(CONFIG_ICU862)
-		udelay(10);
-#else
-		udelay(1);
-#endif
-		j++;
-	}
-	if (j>=TOUT_LOOP) {
-		printf("TX timeout\n");
-	}
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: cycles: %d    status: %x  retry cnt: %d\n",
-	__FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc,
-	(rtx->txbd[txIdx].cbd_sc & 0x003C)>>2);
-#endif
-	/* return only status bits */;
-	rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
-
-	txIdx = (txIdx + 1) % TX_BUF_CNT;
-
-	return rc;
-}
-
-static int fec_recv (struct eth_device *dev)
-{
-	struct ether_fcc_info_s *efis = dev->priv;
-	volatile fec_t *fecp =
-		(volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
-	int length;
-
-	for (;;) {
-		/* section 16.9.23.2 */
-		if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
-			length = -1;
-			break;	/* nothing received - leave for() loop */
-		}
-
-		length = rtx->rxbd[rxIdx].cbd_datlen;
-
-		if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
-#ifdef ET_DEBUG
-			printf ("%s[%d] err: %x\n",
-				__FUNCTION__, __LINE__,
-				rtx->rxbd[rxIdx].cbd_sc);
-#endif
-		} else {
-			volatile uchar *rx = NetRxPackets[rxIdx];
-
-			length -= 4;
-
-#if defined(CONFIG_CMD_CDP)
-			if ((rx[0] & 1) != 0
-			    && memcmp ((uchar *) rx, NetBcastAddr, 6) != 0
-			    && memcmp ((uchar *) rx, NetCDPAddr, 6) != 0)
-				rx = NULL;
-#endif
-			/*
-			 * Pass the packet up to the protocol layers.
-			 */
-			if (rx != NULL)
-				NetReceive (rx, length);
-		}
-
-		/* Give the buffer back to the FEC. */
-		rtx->rxbd[rxIdx].cbd_datlen = 0;
-
-		/* wrap around buffer index when necessary */
-		if ((rxIdx + 1) >= PKTBUFSRX) {
-			rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
-				(BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
-			rxIdx = 0;
-		} else {
-			rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
-			rxIdx++;
-		}
-
-		__asm__ ("eieio");
-
-		/* Try to fill Buffer Descriptors */
-		fecp->fec_r_des_active = 0x01000000;	/* Descriptor polling active    */
-	}
-
-	return length;
-}
-
-/**************************************************************
- *
- * FEC Ethernet Initialization Routine
- *
- *************************************************************/
-
-#define	FEC_ECNTRL_PINMUX	0x00000004
-#define FEC_ECNTRL_ETHER_EN	0x00000002
-#define FEC_ECNTRL_RESET	0x00000001
-
-#define FEC_RCNTRL_BC_REJ	0x00000010
-#define FEC_RCNTRL_PROM		0x00000008
-#define FEC_RCNTRL_MII_MODE	0x00000004
-#define FEC_RCNTRL_DRT		0x00000002
-#define FEC_RCNTRL_LOOP		0x00000001
-
-#define FEC_TCNTRL_FDEN		0x00000004
-#define FEC_TCNTRL_HBC		0x00000002
-#define FEC_TCNTRL_GTS		0x00000001
-
-#define	FEC_RESET_DELAY		50
-
-#if defined(CONFIG_RMII)
-
-static inline void fec_10Mbps(struct eth_device *dev)
-{
-	struct ether_fcc_info_s *efis = dev->priv;
-	int fecidx = efis->ether_index;
-	uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
-
-	if ((unsigned int)fecidx >= 2)
-		hang();
-
-	((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr |=  mask;
-}
-
-static inline void fec_100Mbps(struct eth_device *dev)
-{
-	struct ether_fcc_info_s *efis = dev->priv;
-	int fecidx = efis->ether_index;
-	uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
-
-	if ((unsigned int)fecidx >= 2)
-		hang();
-
-	((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr &= ~mask;
-}
-
-#endif
-
-static inline void fec_full_duplex(struct eth_device *dev)
-{
-	struct ether_fcc_info_s *efis = dev->priv;
-	volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
-	fecp->fec_r_cntrl &= ~FEC_RCNTRL_DRT;
-	fecp->fec_x_cntrl |=  FEC_TCNTRL_FDEN;	/* FD enable */
-}
-
-static inline void fec_half_duplex(struct eth_device *dev)
-{
-	struct ether_fcc_info_s *efis = dev->priv;
-	volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
-	fecp->fec_r_cntrl |=  FEC_RCNTRL_DRT;
-	fecp->fec_x_cntrl &= ~FEC_TCNTRL_FDEN;	/* FD disable */
-}
-
-static void fec_pin_init(int fecidx)
-{
-	bd_t           *bd = gd->bd;
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fec_t *fecp;
-
-	/*
-	 * only two FECs please
-	 */
-	if ((unsigned int)fecidx >= 2)
-		hang();
-
-	if (fecidx == 0)
-		fecp = &immr->im_cpm.cp_fec1;
-	else
-		fecp = &immr->im_cpm.cp_fec2;
-
-	/*
-	 * Set MII speed to 2.5 MHz or slightly below.
-	 * * According to the MPC860T (Rev. D) Fast ethernet controller user
-	 * * manual (6.2.14),
-	 * * the MII management interface clock must be less than or equal
-	 * * to 2.5 MHz.
-	 * * This MDC frequency is equal to system clock / (2 * MII_SPEED).
-	 * * Then MII_SPEED = system_clock / 2 * 2,5 MHz.
-	 *
-	 * All MII configuration is done via FEC1 registers:
-	 */
-	immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
-
-#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
-	/* our PHYs are the limit at 2.5 MHz */
-	fecp->fec_mii_speed <<= 1;
-#endif
-
-#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
-	/* use MDC for MII */
-	immr->im_ioport.iop_pdpar |=  0x0080;
-	immr->im_ioport.iop_pddir &= ~0x0080;
-#endif
-
-	if (fecidx == 0) {
-#if defined(CONFIG_ETHER_ON_FEC1)
-
-#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
-
-#if !defined(CONFIG_RMII)
-
-		immr->im_ioport.iop_papar |=  0xf830;
-		immr->im_ioport.iop_padir |=  0x0830;
-		immr->im_ioport.iop_padir &= ~0xf000;
-
-		immr->im_cpm.cp_pbpar     |=  0x00001001;
-		immr->im_cpm.cp_pbdir     &= ~0x00001001;
-
-		immr->im_ioport.iop_pcpar |=  0x000c;
-		immr->im_ioport.iop_pcdir &= ~0x000c;
-
-		immr->im_cpm.cp_pepar     |=  0x00000003;
-		immr->im_cpm.cp_pedir     |=  0x00000003;
-		immr->im_cpm.cp_peso      &= ~0x00000003;
-
-		immr->im_cpm.cp_cptr      &= ~0x00000100;
-
-#else
-
-#if !defined(CONFIG_FEC1_PHY_NORXERR)
-		immr->im_ioport.iop_papar |=  0x1000;
-		immr->im_ioport.iop_padir &= ~0x1000;
-#endif
-		immr->im_ioport.iop_papar |=  0xe810;
-		immr->im_ioport.iop_padir |=  0x0810;
-		immr->im_ioport.iop_padir &= ~0xe000;
-
-		immr->im_cpm.cp_pbpar     |=  0x00000001;
-		immr->im_cpm.cp_pbdir     &= ~0x00000001;
-
-		immr->im_cpm.cp_cptr      |=  0x00000100;
-		immr->im_cpm.cp_cptr      &= ~0x00000050;
-
-#endif /* !CONFIG_RMII */
-
-#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
-		/*
-		 * Configure all of port D for MII.
-		 */
-		immr->im_ioport.iop_pdpar = 0x1fff;
-
-		/*
-		 * Bits moved from Rev. D onward
-		 */
-		if ((get_immr(0) & 0xffff) < 0x0501)
-			immr->im_ioport.iop_pddir = 0x1c58;	/* Pre rev. D */
-		else
-			immr->im_ioport.iop_pddir = 0x1fff;	/* Rev. D and later */
-#else
-		/*
-		 * Configure port A for MII.
-		 */
-
-#if defined(CONFIG_ICU862) && defined(CONFIG_SYS_DISCOVER_PHY)
-
-		/*
-		 * On the ICU862 board the MII-MDC pin is routed to PD8 pin
-		 * * of CPU, so for this board we need to configure Utopia and
-		 * * enable PD8 to MII-MDC function
-		 */
-		immr->im_ioport.iop_pdpar |= 0x4080;
-#endif
-
-		/*
-		 * Has Utopia been configured?
-		 */
-		if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) {
-			/*
-			 * YES - Use MUXED mode for UTOPIA bus.
-			 * This frees Port A for use by MII (see 862UM table 41-6).
-			 */
-			immr->im_ioport.utmode &= ~0x80;
-		} else {
-			/*
-			 * NO - set SPLIT mode for UTOPIA bus.
-			 *
-			 * This doesn't really effect UTOPIA (which isn't
-			 * enabled anyway) but just tells the 862
-			 * to use port A for MII (see 862UM table 41-6).
-			 */
-			immr->im_ioport.utmode |= 0x80;
-		}
-#endif				/* !defined(CONFIG_ICU862) */
-
-#endif	/* CONFIG_ETHER_ON_FEC1 */
-	} else if (fecidx == 1) {
-
-#if defined(CONFIG_ETHER_ON_FEC2)
-
-#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
-
-#if !defined(CONFIG_RMII)
-		immr->im_cpm.cp_pepar     |=  0x0003fffc;
-		immr->im_cpm.cp_pedir     |=  0x0003fffc;
-		immr->im_cpm.cp_peso      &= ~0x000087fc;
-		immr->im_cpm.cp_peso      |=  0x00037800;
-
-		immr->im_cpm.cp_cptr      &= ~0x00000080;
-#else
-
-#if !defined(CONFIG_FEC2_PHY_NORXERR)
-		immr->im_cpm.cp_pepar     |=  0x00000010;
-		immr->im_cpm.cp_pedir     |=  0x00000010;
-		immr->im_cpm.cp_peso      &= ~0x00000010;
-#endif
-		immr->im_cpm.cp_pepar     |=  0x00039620;
-		immr->im_cpm.cp_pedir     |=  0x00039620;
-		immr->im_cpm.cp_peso      |=  0x00031000;
-		immr->im_cpm.cp_peso      &= ~0x00008620;
-
-		immr->im_cpm.cp_cptr      |=  0x00000080;
-		immr->im_cpm.cp_cptr      &= ~0x00000028;
-#endif /* CONFIG_RMII */
-
-#endif /* CONFIG_MPC885_FAMILY */
-
-#endif /* CONFIG_ETHER_ON_FEC2 */
-
-	}
-}
-
-static int fec_reset(volatile fec_t *fecp)
-{
-	int i;
-
-	/* Whack a reset.
-	 * A delay is required between a reset of the FEC block and
-	 * initialization of other FEC registers because the reset takes
-	 * some time to complete. If you don't delay, subsequent writes
-	 * to FEC registers might get killed by the reset routine which is
-	 * still in progress.
-	 */
-
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
-	for (i = 0;
-	     (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
-	     ++i) {
-		udelay (1);
-	}
-	if (i == FEC_RESET_DELAY)
-		return -1;
-
-	return 0;
-}
-
-static int fec_init (struct eth_device *dev, bd_t * bd)
-{
-	struct ether_fcc_info_s *efis = dev->priv;
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fec_t *fecp =
-		(volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
-	int i;
-
-	if (efis->ether_index == 0) {
-#if defined(CONFIG_FADS)	/* FADS family uses FPGA (BCSR) to control PHYs */
-#if defined(CONFIG_MPC885ADS)
-		*(vu_char *) BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST);
-#else
-		/* configure FADS for fast (FEC) ethernet, half-duplex */
-		/* The LXT970 needs about 50ms to recover from reset, so
-		 * wait for it by discovering the PHY before leaving eth_init().
-		 */
-		{
-			volatile uint *bcsr4 = (volatile uint *) BCSR4;
-
-			*bcsr4 = (*bcsr4 & ~(BCSR4_FETH_EN | BCSR4_FETHCFG1))
-				| (BCSR4_FETHCFG0 | BCSR4_FETHFDE |
-				   BCSR4_FETHRST);
-
-			/* reset the LXT970 PHY */
-			*bcsr4 &= ~BCSR4_FETHRST;
-			udelay (10);
-			*bcsr4 |= BCSR4_FETHRST;
-			udelay (10);
-		}
-#endif /* CONFIG_MPC885ADS */
-#endif /* CONFIG_FADS */
-	}
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-	/* the MII interface is connected to FEC1
-	 * so for the miiphy_xxx function to work we must
-	 * call mii_init since fec_halt messes the thing up
-	 */
-	if (efis->ether_index != 0)
-		__mii_init();
-#endif
-
-	if (fec_reset(fecp) < 0)
-		printf ("FEC_RESET_DELAY timeout\n");
-
-	/* We use strictly polling mode only
-	 */
-	fecp->fec_imask = 0;
-
-	/* Clear any pending interrupt
-	 */
-	fecp->fec_ievent = 0xffc0;
-
-	/* No need to set the IVEC register */
-
-	/* Set station address
-	 */
-#define ea dev->enetaddr
-	fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
-	fecp->fec_addr_high = (ea[4] << 8) | (ea[5]);
-#undef ea
-
-#if defined(CONFIG_CMD_CDP)
-	/*
-	 * Turn on multicast address hash table
-	 */
-	fecp->fec_hash_table_high = 0xffffffff;
-	fecp->fec_hash_table_low = 0xffffffff;
-#else
-	/* Clear multicast address hash table
-	 */
-	fecp->fec_hash_table_high = 0;
-	fecp->fec_hash_table_low = 0;
-#endif
-
-	/* Set maximum receive buffer size.
-	 */
-	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-
-	/* Set maximum frame length
-	 */
-	fecp->fec_r_hash = PKT_MAXBUF_SIZE;
-
-	/*
-	 * Setup Buffers and Buffer Desriptors
-	 */
-	rxIdx = 0;
-	txIdx = 0;
-
-	if (!rtx) {
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-		rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
-				 dpram_alloc_align (sizeof (RTXBD), 8));
-#else
-		rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_FEC_BASE);
-#endif
-	}
-	/*
-	 * Setup Receiver Buffer Descriptors (13.14.24.18)
-	 * Settings:
-	 *     Empty, Wrap
-	 */
-	for (i = 0; i < PKTBUFSRX; i++) {
-		rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
-		rtx->rxbd[i].cbd_datlen = 0;	/* Reset */
-		rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
-	}
-	rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
-	/*
-	 * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
-	 * Settings:
-	 *    Last, Tx CRC
-	 */
-	for (i = 0; i < TX_BUF_CNT; i++) {
-		rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
-		rtx->txbd[i].cbd_datlen = 0;	/* Reset */
-		rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
-	}
-	rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
-	/* Set receive and transmit descriptor base
-	 */
-	fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
-	fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
-
-	/* Enable MII mode
-	 */
-#if 0				/* Full duplex mode */
-	fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
-	fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
-#else  /* Half duplex mode */
-	fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
-	fecp->fec_x_cntrl = 0;
-#endif
-
-	/* Enable big endian and don't care about SDMA FC.
-	 */
-	fecp->fec_fun_code = 0x78000000;
-
-	/*
-	 * Setup the pin configuration of the FEC
-	 */
-	fec_pin_init (efis->ether_index);
-
-	rxIdx = 0;
-	txIdx = 0;
-
-	/*
-	 * Now enable the transmit and receive processing
-	 */
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
-
-	if (efis->phy_addr == -1) {
-#ifdef CONFIG_SYS_DISCOVER_PHY
-		/*
-		 * wait for the PHY to wake up after reset
-		 */
-		efis->actual_phy_addr = mii_discover_phy (dev);
-
-		if (efis->actual_phy_addr == -1) {
-			printf ("Unable to discover phy!\n");
-			return -1;
-		}
-#else
-		efis->actual_phy_addr = -1;
-#endif
-	} else {
-		efis->actual_phy_addr = efis->phy_addr;
-	}
-
-#if defined(CONFIG_MII) && defined(CONFIG_RMII)
-	/*
-	 * adapt the RMII speed to the speed of the phy
-	 */
-	if (miiphy_speed (dev->name, efis->actual_phy_addr) == _100BASET) {
-		fec_100Mbps (dev);
-	} else {
-		fec_10Mbps (dev);
-	}
-#endif
-
-#if defined(CONFIG_MII)
-	/*
-	 * adapt to the half/full speed settings
-	 */
-	if (miiphy_duplex (dev->name, efis->actual_phy_addr) == FULL) {
-		fec_full_duplex (dev);
-	} else {
-		fec_half_duplex (dev);
-	}
-#endif
-
-	/* And last, try to fill Rx Buffer Descriptors */
-	fecp->fec_r_des_active = 0x01000000;	/* Descriptor polling active    */
-
-	efis->initialized = 1;
-
-	return 0;
-}
-
-
-static void fec_halt(struct eth_device* dev)
-{
-	struct ether_fcc_info_s *efis = dev->priv;
-	volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-	int i;
-
-	/* avoid halt if initialized; mii gets stuck otherwise */
-	if (!efis->initialized)
-		return;
-
-	/* Whack a reset.
-	 * A delay is required between a reset of the FEC block and
-	 * initialization of other FEC registers because the reset takes
-	 * some time to complete. If you don't delay, subsequent writes
-	 * to FEC registers might get killed by the reset routine which is
-	 * still in progress.
-	 */
-
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
-	for (i = 0;
-	     (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
-	     ++i) {
-		udelay (1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf ("FEC_RESET_DELAY timeout\n");
-		return;
-	}
-
-	efis->initialized = 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-
-/* Make MII read/write commands for the FEC.
-*/
-
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | \
-						(REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | \
-						(REG & 0x1f) << 18) | \
-						(VAL & 0xffff))
-
-/* Interrupt events/masks.
-*/
-#define FEC_ENET_HBERR	((uint)0x80000000)	/* Heartbeat error */
-#define FEC_ENET_BABR	((uint)0x40000000)	/* Babbling receiver */
-#define FEC_ENET_BABT	((uint)0x20000000)	/* Babbling transmitter */
-#define FEC_ENET_GRA	((uint)0x10000000)	/* Graceful stop complete */
-#define FEC_ENET_TXF	((uint)0x08000000)	/* Full frame transmitted */
-#define FEC_ENET_TXB	((uint)0x04000000)	/* A buffer was transmitted */
-#define FEC_ENET_RXF	((uint)0x02000000)	/* Full frame received */
-#define FEC_ENET_RXB	((uint)0x01000000)	/* A buffer was received */
-#define FEC_ENET_MII	((uint)0x00800000)	/* MII interrupt */
-#define FEC_ENET_EBERR	((uint)0x00400000)	/* SDMA bus error */
-
-/* PHY identification
- */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DM9161		0x0181B880	/* Davicom DM9161 */
-#define PHY_ID_KSM8995M		0x00221450	/* MICREL KS8995MA */
-
-/* send command to phy using mii, wait for result */
-static uint
-mii_send(uint mii_cmd)
-{
-	uint mii_reply;
-	volatile fec_t	*ep;
-	int cnt;
-
-	ep = &(((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_fec);
-
-	ep->fec_mii_data = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	cnt = 0;
-	while (!(ep->fec_ievent & FEC_ENET_MII)) {
-		if (++cnt > 1000) {
-			printf("mii_send STUCK!\n");
-			break;
-		}
-	}
-	mii_reply = ep->fec_mii_data;		/* result from phy */
-	ep->fec_ievent = FEC_ENET_MII;		/* clear MII complete */
-#if 0
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-		__FILE__,__LINE__,__FUNCTION__,mii_cmd,mii_reply);
-#endif
-	return (mii_reply & 0xffff);		/* data read from phy */
-}
-#endif
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-static int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	uint phyno;
-	int  pass;
-	uint phytype;
-	int phyaddr;
-
-	phyaddr = -1;	/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type ", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype |= mii_send(mk_mii_read(phyno,
-								PHY_PHYIDR1)) << 16;
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ",phyno,pass);
-				switch (phytype & 0xfffffff0) {
-				case PHY_ID_LXT970:
-					printf("LXT970\n");
-					break;
-				case PHY_ID_LXT971:
-					printf("LXT971\n");
-					break;
-				case PHY_ID_82555:
-					printf("82555\n");
-					break;
-				case PHY_ID_QS6612:
-					printf("QS6612\n");
-					break;
-				case PHY_ID_AMD79C784:
-					printf("AMD79C784\n");
-					break;
-				case PHY_ID_LSI80225B:
-					printf("LSI L80225/B\n");
-					break;
-				case PHY_ID_DM9161:
-					printf("Davicom DM9161\n");
-					break;
-				case PHY_ID_KSM8995M:
-					printf("MICREL KS8995M\n");
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0) {
-		printf("No PHY device found.\n");
-	}
-	return phyaddr;
-}
-#endif	/* CONFIG_SYS_DISCOVER_PHY */
-
-#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
-
-/****************************************************************************
- * mii_init -- Initialize the MII via FEC 1 for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-static void __mii_init(void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
-
-	if (fec_reset(fecp) < 0)
-		printf ("FEC_RESET_DELAY timeout\n");
-
-	/* We use strictly polling mode only
-	 */
-	fecp->fec_imask = 0;
-
-	/* Clear any pending interrupt
-	 */
-	fecp->fec_ievent = 0xffc0;
-
-	/* Now enable the transmit and receive processing
-	 */
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
-}
-
-void mii_init (void)
-{
-	int i;
-
-	__mii_init();
-
-	/* Setup the pin configuration of the FEC(s)
-	*/
-	for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
-		fec_pin_init(ether_fcc_info[i].ether_index);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int fec8xx_miiphy_read(char *devname, unsigned char addr,
-		unsigned char  reg, unsigned short *value)
-{
-	short rdreg;    /* register working value */
-
-#ifdef MII_DEBUG
-	printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-#ifdef MII_DEBUG
-	printf ("0x%04x\n", *value);
-#endif
-	return 0;
-}
-
-int fec8xx_miiphy_write(char *devname, unsigned char  addr,
-		unsigned char  reg, unsigned short value)
-{
-	short rdreg;    /* register working value */
-#ifdef MII_DEBUG
-	printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf ("0x%04x\n", value);
-#endif
-	return 0;
-}
-#endif
-
-#endif
diff --git a/cpu/mpc8xx/fec.h b/cpu/mpc8xx/fec.h
deleted file mode 100644
index a49417c..0000000
--- a/cpu/mpc8xx/fec.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef	_FEC_H_
-#define	_FEC_H_
-
-
-#endif	/* _FEC_H_ */
diff --git a/cpu/mpc8xx/i2c.c b/cpu/mpc8xx/i2c.c
deleted file mode 100644
index 338caba..0000000
--- a/cpu/mpc8xx/i2c.c
+++ /dev/null
@@ -1,707 +0,0 @@
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- *
- * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Back ported to the 8xx platform (from the 8260 platform) by
- * Murray.Jensen@cmst.csiro.au, 27-Jan-01.
- */
-
-#include <common.h>
-
-#ifdef CONFIG_HARD_I2C
-
-#include <commproc.h>
-#include <i2c.h>
-#ifdef CONFIG_LWMON
-#include <watchdog.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* define to enable debug messages */
-#undef	DEBUG_I2C
-
-/* tx/rx timeout (we need the i2c early, so we don't use get_timer()) */
-#define TOUT_LOOP 1000000
-
-#define NUM_RX_BDS 4
-#define NUM_TX_BDS 4
-#define MAX_TX_SPACE 256
-#define I2C_RXTX_LEN 128	/* maximum tx/rx buffer length */
-
-typedef struct I2C_BD
-{
-  unsigned short status;
-  unsigned short length;
-  unsigned char *addr;
-} I2C_BD;
-#define BD_I2C_TX_START 0x0400  /* special status for i2c: Start condition */
-
-#define BD_I2C_TX_CL	0x0001	/* collision error */
-#define BD_I2C_TX_UN	0x0002	/* underflow error */
-#define BD_I2C_TX_NAK	0x0004	/* no acknowledge error */
-#define BD_I2C_TX_ERR	(BD_I2C_TX_NAK|BD_I2C_TX_UN|BD_I2C_TX_CL)
-
-#define BD_I2C_RX_ERR	BD_SC_OV
-
-typedef void (*i2c_ecb_t)(int, int);	/* error callback function */
-
-/* This structure keeps track of the bd and buffer space usage. */
-typedef struct i2c_state {
-	int		rx_idx;		/* index   to next free Rx BD */
-	int		tx_idx;		/* index   to next free Tx BD */
-	void		*rxbd;		/* pointer to next free Rx BD */
-	void		*txbd;		/* pointer to next free Tx BD */
-	int		tx_space;	/* number  of Tx bytes left   */
-	unsigned char	*tx_buf;	/* pointer to free Tx area    */
-	i2c_ecb_t	err_cb;		/* error callback function    */
-} i2c_state_t;
-
-
-/* flags for i2c_send() and i2c_receive() */
-#define I2CF_ENABLE_SECONDARY	0x01	/* secondary_address is valid		*/
-#define I2CF_START_COND		0x02	/* tx: generate start condition		*/
-#define I2CF_STOP_COND		0x04	/* tx: generate stop  condition		*/
-
-/* return codes */
-#define I2CERR_NO_BUFFERS	0x01	/* no more BDs or buffer space		*/
-#define I2CERR_MSG_TOO_LONG	0x02	/* tried to send/receive to much data	*/
-#define I2CERR_TIMEOUT		0x03	/* timeout in i2c_doio()		*/
-#define I2CERR_QUEUE_EMPTY	0x04	/* i2c_doio called without send/receive */
-
-/* error callback flags */
-#define I2CECB_RX_ERR		0x10	/* this is a receive error		*/
-#define     I2CECB_RX_ERR_OV	0x02	/* receive overrun error		*/
-#define     I2CECB_RX_MASK	0x0f	/* mask for error bits			*/
-#define I2CECB_TX_ERR		0x20	/* this is a transmit error		*/
-#define     I2CECB_TX_CL	0x01	/* transmit collision error		*/
-#define     I2CECB_TX_UN	0x02	/* transmit underflow error		*/
-#define     I2CECB_TX_NAK	0x04	/* transmit no ack error		*/
-#define     I2CECB_TX_MASK	0x0f	/* mask for error bits			*/
-#define I2CECB_TIMEOUT		0x40	/* this is a timeout error		*/
-
-#ifdef DEBUG_I2C
-#define PRINTD(x) printf x
-#else
-#define PRINTD(x)
-#endif
-
-/*
- * Returns the best value of I2BRG to meet desired clock speed of I2C with
- * input parameters (clock speed, filter, and predivider value).
- * It returns computer speed value and the difference between it and desired
- * speed.
- */
-static inline int
-i2c_roundrate(int hz, int speed, int filter, int modval,
-		int *brgval, int *totspeed)
-{
-    int moddiv = 1 << (5-(modval & 3)), brgdiv, div;
-
-    PRINTD(("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n",
-	hz, speed, filter, modval));
-
-    div = moddiv * speed;
-    brgdiv = (hz + div - 1) / div;
-
-    PRINTD(("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv));
-
-    *brgval = ((brgdiv + 1) / 2) - 3 - (2*filter);
-
-    if ((*brgval < 0) || (*brgval > 255)) {
-	  PRINTD(("\t\trejected brgval=%d\n", *brgval));
-	  return -1;
-    }
-
-    brgdiv = 2 * (*brgval + 3 + (2 * filter));
-    div = moddiv * brgdiv ;
-    *totspeed = hz / div;
-
-    PRINTD(("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed));
-
-    return  0;
-}
-
-/*
- * Sets the I2C clock predivider and divider to meet required clock speed.
- */
-static int
-i2c_setrate (int hz, int speed)
-{
-	immap_t		*immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile i2c8xx_t *i2c = (i2c8xx_t *) & immap->im_i2c;
-	int		brgval,
-			modval,		/* 0-3 */
-			bestspeed_diff = speed,
-			bestspeed_brgval = 0,
-			bestspeed_modval = 0,
-			bestspeed_filter = 0,
-			totspeed,
-			filter = 0;	/* Use this fixed value */
-
-	for (modval = 0; modval < 4; modval++) {
-		if (i2c_roundrate(hz,speed,filter,modval,&brgval,&totspeed) == 0) {
-			int diff = speed - totspeed;
-
-			if ((diff >= 0) && (diff < bestspeed_diff)) {
-				bestspeed_diff = diff;
-				bestspeed_modval = modval;
-				bestspeed_brgval = brgval;
-				bestspeed_filter = filter;
-			}
-		}
-	}
-
-	PRINTD (("[I2C] Best is:\n"));
-	PRINTD (("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n",
-		hz,
-		speed,
-		bestspeed_filter,
-		bestspeed_modval,
-		bestspeed_brgval,
-		bestspeed_diff));
-
-	i2c->i2c_i2mod |= ((bestspeed_modval & 3) << 1) | (bestspeed_filter << 3);
-	i2c->i2c_i2brg = bestspeed_brgval & 0xff;
-
-	PRINTD (("[I2C] i2mod=%08x i2brg=%08x\n", i2c->i2c_i2mod,
-			 i2c->i2c_i2brg));
-
-	return 1;
-}
-
-void
-i2c_init(int speed, int slaveaddr)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
-	volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
-	volatile i2c8xx_t *i2c	= (i2c8xx_t *)&immap->im_i2c;
-	volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-	ulong rbase, tbase;
-	volatile I2C_BD *rxbd, *txbd;
-	uint dpaddr;
-
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
-	/* call board specific i2c bus reset routine before accessing the   */
-	/* environment, which might be in a chip on that bus. For details   */
-	/* about this problem see doc/I2C_Edge_Conditions.                  */
-	i2c_init_board();
-#endif
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
-	iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
-#else
-	/* Disable relocation */
-	iip->iic_rpbase = 0;
-#endif
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-	dpaddr = iip->iic_rbase;
-	if (dpaddr == 0) {
-	    /* need to allocate dual port ram */
-	    dpaddr = dpram_alloc_align(
-		(NUM_RX_BDS * sizeof(I2C_BD)) + (NUM_TX_BDS * sizeof(I2C_BD)) +
-		MAX_TX_SPACE, 8);
-	}
-#else
-	dpaddr = CPM_I2C_BASE;
-#endif
-
-	/*
-	 * initialise data in dual port ram:
-	 *
-	 * dpaddr->rbase -> rx BD         (NUM_RX_BDS * sizeof(I2C_BD) bytes)
-	 *         tbase -> tx BD         (NUM_TX_BDS * sizeof(I2C_BD) bytes)
-	 *                  tx buffer     (MAX_TX_SPACE bytes)
-	 */
-
-	rbase = dpaddr;
-	tbase = rbase + NUM_RX_BDS * sizeof(I2C_BD);
-
-	/* Initialize Port B I2C pins. */
-	cp->cp_pbpar |= 0x00000030;
-	cp->cp_pbdir |= 0x00000030;
-	cp->cp_pbodr |= 0x00000030;
-
-	/* Disable interrupts */
-	i2c->i2c_i2mod = 0x00;
-	i2c->i2c_i2cmr = 0x00;
-	i2c->i2c_i2cer = 0xff;
-	i2c->i2c_i2add = slaveaddr;
-
-	/*
-	 * Set the I2C BRG Clock division factor from desired i2c rate
-	 * and current CPU rate (we assume sccr dfbgr field is 0;
-	 * divide BRGCLK by 1)
-	 */
-	PRINTD(("[I2C] Setting rate...\n"));
-	i2c_setrate (gd->cpu_clk, CONFIG_SYS_I2C_SPEED) ;
-
-	/* Set I2C controller in master mode */
-	i2c->i2c_i2com = 0x01;
-
-	/* Set SDMA bus arbitration level to 5 (SDCR) */
-	immap->im_siu_conf.sc_sdcr = 0x0001 ;
-
-	/* Initialize Tx/Rx parameters */
-	iip->iic_rbase = rbase;
-	iip->iic_tbase = tbase;
-	rxbd = (I2C_BD *)((unsigned char *)&cp->cp_dpmem[iip->iic_rbase]);
-	txbd = (I2C_BD *)((unsigned char *)&cp->cp_dpmem[iip->iic_tbase]);
-
-	PRINTD(("[I2C] rbase = %04x\n", iip->iic_rbase));
-	PRINTD(("[I2C] tbase = %04x\n", iip->iic_tbase));
-	PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
-	PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
-	/* Set big endian byte order */
-	iip->iic_tfcr = 0x10;
-	iip->iic_rfcr = 0x10;
-
-	/* Set maximum receive size. */
-	iip->iic_mrblr = I2C_RXTX_LEN;
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
-	/*
-	 *  Initialize required parameters if using microcode patch.
-	 */
-	iip->iic_rbptr  = iip->iic_rbase;
-	iip->iic_tbptr  = iip->iic_tbase;
-	iip->iic_rstate = 0;
-	iip->iic_tstate = 0;
-#else
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	do {
-		__asm__ __volatile__ ("eieio");
-	} while (cp->cp_cpcr & CPM_CR_FLG);
-#endif
-
-	/* Clear events and interrupts */
-	i2c->i2c_i2cer = 0xff;
-	i2c->i2c_i2cmr = 0x00;
-}
-
-static void
-i2c_newio(i2c_state_t *state)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
-	volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
-	volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-
-	PRINTD(("[I2C] i2c_newio\n"));
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
-	iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
-#endif
-	state->rx_idx = 0;
-	state->tx_idx = 0;
-	state->rxbd = (void*)&cp->cp_dpmem[iip->iic_rbase];
-	state->txbd = (void*)&cp->cp_dpmem[iip->iic_tbase];
-	state->tx_space = MAX_TX_SPACE;
-	state->tx_buf = (uchar*)state->txbd + NUM_TX_BDS * sizeof(I2C_BD);
-	state->err_cb = NULL;
-
-	PRINTD(("[I2C] rxbd = %08x\n", (int)state->rxbd));
-	PRINTD(("[I2C] txbd = %08x\n", (int)state->txbd));
-	PRINTD(("[I2C] tx_buf = %08x\n", (int)state->tx_buf));
-
-	/* clear the buffer memory */
-	memset((char *)state->tx_buf, 0, MAX_TX_SPACE);
-}
-
-static int
-i2c_send(i2c_state_t *state,
-	 unsigned char address,
-	 unsigned char secondary_address,
-	 unsigned int flags,
-	 unsigned short size,
-	 unsigned char *dataout)
-{
-	volatile I2C_BD *txbd;
-	int i,j;
-
-	PRINTD(("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n",
-			address, secondary_address, flags, size));
-
-	/* trying to send message larger than BD */
-	if (size > I2C_RXTX_LEN)
-	  return I2CERR_MSG_TOO_LONG;
-
-	/* no more free bds */
-	if (state->tx_idx >= NUM_TX_BDS || state->tx_space < (2 + size))
-	  return I2CERR_NO_BUFFERS;
-
-	txbd = (I2C_BD *)state->txbd;
-	txbd->addr = state->tx_buf;
-
-	PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
-	if (flags & I2CF_START_COND) {
-		PRINTD(("[I2C] Formatting addresses...\n"));
-		if (flags & I2CF_ENABLE_SECONDARY) {
-			txbd->length = size + 2;  /* Length of msg + dest addr */
-			txbd->addr[0] = address << 1;
-			txbd->addr[1] = secondary_address;
-			i = 2;
-		} else {
-			txbd->length = size + 1;  /* Length of msg + dest addr */
-			txbd->addr[0] = address << 1;  /* Write dest addr to BD */
-			i = 1;
-		}
-	} else {
-		txbd->length = size;  /* Length of message */
-		i = 0;
-	}
-
-	/* set up txbd */
-	txbd->status = BD_SC_READY;
-	if (flags & I2CF_START_COND)
-	  txbd->status |= BD_I2C_TX_START;
-	if (flags & I2CF_STOP_COND)
-	  txbd->status |= BD_SC_LAST | BD_SC_WRAP;
-
-	/* Copy data to send into buffer */
-	PRINTD(("[I2C] copy data...\n"));
-	for(j = 0; j < size; i++, j++)
-	  txbd->addr[i] = dataout[j];
-
-	PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
-		   txbd->length,
-		   txbd->status,
-		   txbd->addr[0],
-		   txbd->addr[1]));
-
-	/* advance state */
-	state->tx_buf += txbd->length;
-	state->tx_space -= txbd->length;
-	state->tx_idx++;
-	state->txbd = (void*)(txbd + 1);
-
-	return 0;
-}
-
-static int
-i2c_receive(i2c_state_t *state,
-	    unsigned char address,
-	    unsigned char secondary_address,
-	    unsigned int flags,
-	    unsigned short size_to_expect,
-	    unsigned char *datain)
-{
-	volatile I2C_BD *rxbd, *txbd;
-
-	PRINTD(("[I2C] i2c_receive %02d %02d %02d\n", address, secondary_address, flags));
-
-	/* Expected to receive too much */
-	if (size_to_expect > I2C_RXTX_LEN)
-	  return I2CERR_MSG_TOO_LONG;
-
-	/* no more free bds */
-	if (state->tx_idx >= NUM_TX_BDS || state->rx_idx >= NUM_RX_BDS
-		 || state->tx_space < 2)
-	  return I2CERR_NO_BUFFERS;
-
-	rxbd = (I2C_BD *)state->rxbd;
-	txbd = (I2C_BD *)state->txbd;
-
-	PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
-	PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
-	txbd->addr = state->tx_buf;
-
-	/* set up TXBD for destination address */
-	if (flags & I2CF_ENABLE_SECONDARY) {
-		txbd->length = 2;
-		txbd->addr[0] = address << 1;   /* Write data */
-		txbd->addr[1] = secondary_address;  /* Internal address */
-		txbd->status = BD_SC_READY;
-	} else {
-		txbd->length = 1 + size_to_expect;
-		txbd->addr[0] = (address << 1) | 0x01;
-		txbd->status = BD_SC_READY;
-		memset(&txbd->addr[1], 0, txbd->length);
-	}
-
-	/* set up rxbd for reception */
-	rxbd->status = BD_SC_EMPTY;
-	rxbd->length = size_to_expect;
-	rxbd->addr = datain;
-
-	txbd->status |= BD_I2C_TX_START;
-	if (flags & I2CF_STOP_COND) {
-		txbd->status |= BD_SC_LAST | BD_SC_WRAP;
-		rxbd->status |= BD_SC_WRAP;
-	}
-
-	PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
-		   txbd->length,
-		   txbd->status,
-		   txbd->addr[0],
-		   txbd->addr[1]));
-	PRINTD(("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
-		   rxbd->length,
-		   rxbd->status,
-		   rxbd->addr[0],
-		   rxbd->addr[1]));
-
-	/* advance state */
-	state->tx_buf += txbd->length;
-	state->tx_space -= txbd->length;
-	state->tx_idx++;
-	state->txbd = (void*)(txbd + 1);
-	state->rx_idx++;
-	state->rxbd = (void*)(rxbd + 1);
-
-	return 0;
-}
-
-
-static int i2c_doio(i2c_state_t *state)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
-	volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
-	volatile i2c8xx_t *i2c	= (i2c8xx_t *)&immap->im_i2c;
-	volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-	volatile I2C_BD *txbd, *rxbd;
-	volatile int j = 0;
-
-	PRINTD(("[I2C] i2c_doio\n"));
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
-	iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
-#endif
-
-	if (state->tx_idx <= 0 && state->rx_idx <= 0) {
-		PRINTD(("[I2C] No I/O is queued\n"));
-		return I2CERR_QUEUE_EMPTY;
-	}
-
-	iip->iic_rbptr = iip->iic_rbase;
-	iip->iic_tbptr = iip->iic_tbase;
-
-	/* Enable I2C */
-	PRINTD(("[I2C] Enabling I2C...\n"));
-	i2c->i2c_i2mod |= 0x01;
-
-	/* Begin transmission */
-	i2c->i2c_i2com |= 0x80;
-
-	/* Loop until transmit & receive completed */
-
-	if (state->tx_idx > 0) {
-		txbd = ((I2C_BD*)state->txbd) - 1;
-		PRINTD(("[I2C] Transmitting...(txbd=0x%08lx)\n", (ulong)txbd));
-		while((txbd->status & BD_SC_READY) && (j++ < TOUT_LOOP)) {
-			if (ctrlc()) {
-				return (-1);
-			}
-			__asm__ __volatile__ ("eieio");
-		}
-	}
-
-	if ((state->rx_idx > 0) && (j < TOUT_LOOP)) {
-		rxbd = ((I2C_BD*)state->rxbd) - 1;
-		PRINTD(("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong)rxbd));
-		while((rxbd->status & BD_SC_EMPTY) && (j++ < TOUT_LOOP)) {
-			if (ctrlc()) {
-				return (-1);
-			}
-			__asm__ __volatile__ ("eieio");
-		}
-	}
-
-	/* Turn off I2C */
-	i2c->i2c_i2mod &= ~0x01;
-
-	if (state->err_cb != NULL) {
-		int n, i, b;
-
-		/*
-		 * if we have an error callback function, look at the
-		 * error bits in the bd status and pass them back
-		 */
-
-		if ((n = state->tx_idx) > 0) {
-			for (i = 0; i < n; i++) {
-				txbd = ((I2C_BD*)state->txbd) - (n - i);
-				if ((b = txbd->status & BD_I2C_TX_ERR) != 0)
-					(*state->err_cb)(I2CECB_TX_ERR|b, i);
-			}
-		}
-
-		if ((n = state->rx_idx) > 0) {
-			for (i = 0; i < n; i++) {
-				rxbd = ((I2C_BD*)state->rxbd) - (n - i);
-				if ((b = rxbd->status & BD_I2C_RX_ERR) != 0)
-					(*state->err_cb)(I2CECB_RX_ERR|b, i);
-			}
-		}
-
-		if (j >= TOUT_LOOP)
-			(*state->err_cb)(I2CECB_TIMEOUT, 0);
-	}
-
-	return (j >= TOUT_LOOP) ? I2CERR_TIMEOUT : 0;
-}
-
-static int had_tx_nak;
-
-static void
-i2c_test_callback(int flags, int xnum)
-{
-	if ((flags & I2CECB_TX_ERR) && (flags & I2CECB_TX_NAK))
-		had_tx_nak = 1;
-}
-
-int i2c_probe(uchar chip)
-{
-	i2c_state_t state;
-	int rc;
-	uchar buf[1];
-
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
-	i2c_newio(&state);
-
-	state.err_cb = i2c_test_callback;
-	had_tx_nak = 0;
-
-	rc = i2c_receive(&state, chip, 0, I2CF_START_COND|I2CF_STOP_COND, 1, buf);
-
-	if (rc != 0)
-		return (rc);
-
-	rc = i2c_doio(&state);
-
-	if ((rc != 0) && (rc != I2CERR_TIMEOUT))
-		return (rc);
-
-	return (had_tx_nak);
-}
-
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
-	i2c_state_t state;
-	uchar xaddr[4];
-	int rc;
-
-#ifdef CONFIG_LWMON
-	WATCHDOG_RESET();
-#endif
-
-	xaddr[0] = (addr >> 24) & 0xFF;
-	xaddr[1] = (addr >> 16) & 0xFF;
-	xaddr[2] = (addr >>  8) & 0xFF;
-	xaddr[3] =  addr        & 0xFF;
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-	/*
-	 * EEPROM chips that implement "address overflow" are ones like
-	 * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the
-	 * extra bits end up in the "chip address" bit slots.  This makes
-	 * a 24WC08 (1Kbyte) chip look like four 256 byte chips.
-	 *
-	 * Note that we consider the length of the address field to still
-	 * be one byte because the extra address bits are hidden in the
-	 * chip address.
-	 */
-	 chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-
-	i2c_newio(&state);
-
-	rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
-	if (rc != 0) {
-		if (gd->have_console)
-			printf("i2c_read: i2c_send failed (%d)\n", rc);
-		return 1;
-	}
-
-	rc = i2c_receive(&state, chip, 0, I2CF_STOP_COND, len, buffer);
-	if (rc != 0) {
-		if (gd->have_console)
-			printf("i2c_read: i2c_receive failed (%d)\n", rc);
-		return 1;
-	}
-
-	rc = i2c_doio(&state);
-	if (rc != 0) {
-		if (gd->have_console)
-			printf("i2c_read: i2c_doio failed (%d)\n", rc);
-		return 1;
-	}
-	return 0;
-}
-
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
-	i2c_state_t state;
-	uchar xaddr[4];
-	int rc;
-
-	xaddr[0] = (addr >> 24) & 0xFF;
-	xaddr[1] = (addr >> 16) & 0xFF;
-	xaddr[2] = (addr >>  8) & 0xFF;
-	xaddr[3] =  addr        & 0xFF;
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-	/*
-	 * EEPROM chips that implement "address overflow" are ones like
-	 * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the
-	 * extra bits end up in the "chip address" bit slots.  This makes
-	 * a 24WC08 (1Kbyte) chip look like four 256 byte chips.
-	 *
-	 * Note that we consider the length of the address field to still
-	 * be one byte because the extra address bits are hidden in the
-	 * chip address.
-	 */
-	 chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-
-	i2c_newio(&state);
-
-	rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
-	if (rc != 0) {
-		if (gd->have_console)
-			printf("i2c_write: first i2c_send failed (%d)\n", rc);
-		return 1;
-	}
-
-	rc = i2c_send(&state, 0, 0, I2CF_STOP_COND, len, buffer);
-	if (rc != 0) {
-		if (gd->have_console)
-			printf("i2c_write: second i2c_send failed (%d)\n", rc);
-		return 1;
-	}
-
-	rc = i2c_doio(&state);
-	if (rc != 0) {
-		if (gd->have_console)
-			printf("i2c_write: i2c_doio failed (%d)\n", rc);
-		return 1;
-	}
-	return 0;
-}
-
-#endif	/* CONFIG_HARD_I2C */
diff --git a/cpu/mpc8xx/interrupts.c b/cpu/mpc8xx/interrupts.c
deleted file mode 100644
index 5daa6b2..0000000
--- a/cpu/mpc8xx/interrupts.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <mpc8xx_irq.h>
-#include <asm/processor.h>
-#include <commproc.h>
-
-/************************************************************************/
-
-/*
- * CPM interrupt vector functions.
- */
-struct interrupt_action {
-	interrupt_handler_t *handler;
-	void *arg;
-};
-
-static struct interrupt_action cpm_vecs[CPMVEC_NR];
-static struct interrupt_action irq_vecs[NR_IRQS];
-
-static void cpm_interrupt_init (void);
-static void cpm_interrupt (void *regs);
-
-/************************************************************************/
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-	*decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
-	/* disable all interrupts */
-	immr->im_siu_conf.sc_simask = 0;
-
-	/* Configure CPM interrupts */
-	cpm_interrupt_init ();
-
-	return (0);
-}
-
-/************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	int irq;
-	ulong simask, newmask;
-	ulong vec, v_bit;
-
-	/*
-	 * read the SIVEC register and shift the bits down
-	 * to get the irq number
-	 */
-	vec = immr->im_siu_conf.sc_sivec;
-	irq = vec >> 26;
-	v_bit = 0x80000000UL >> irq;
-
-	/*
-	 * Read Interrupt Mask Register and Mask Interrupts
-	 */
-	simask = immr->im_siu_conf.sc_simask;
-	newmask = simask & (~(0xFFFF0000 >> irq));
-	immr->im_siu_conf.sc_simask = newmask;
-
-	if (!(irq & 0x1)) {		/* External Interrupt ?     */
-		ulong siel;
-
-		/*
-		 * Read Interrupt Edge/Level Register
-		 */
-		siel = immr->im_siu_conf.sc_siel;
-
-		if (siel & v_bit) {	/* edge triggered interrupt ?   */
-			/*
-			 * Rewrite SIPEND Register to clear interrupt
-			 */
-			immr->im_siu_conf.sc_sipend = v_bit;
-		}
-	}
-
-	if (irq_vecs[irq].handler != NULL) {
-		irq_vecs[irq].handler (irq_vecs[irq].arg);
-	} else {
-		printf ("\nBogus External Interrupt IRQ %d Vector %ld\n",
-				irq, vec);
-		/* turn off the bogus interrupt to avoid it from now */
-		simask &= ~v_bit;
-	}
-	/*
-	 * Re-Enable old Interrupt Mask
-	 */
-	immr->im_siu_conf.sc_simask = simask;
-}
-
-/************************************************************************/
-
-/*
- * CPM interrupt handler
- */
-static void cpm_interrupt (void *regs)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	uint vec;
-
-	/*
-	 * Get the vector by setting the ACK bit
-	 * and then reading the register.
-	 */
-	immr->im_cpic.cpic_civr = 1;
-	vec = immr->im_cpic.cpic_civr;
-	vec >>= 11;
-
-	if (cpm_vecs[vec].handler != NULL) {
-		(*cpm_vecs[vec].handler) (cpm_vecs[vec].arg);
-	} else {
-		immr->im_cpic.cpic_cimr &= ~(1 << vec);
-		printf ("Masking bogus CPM interrupt vector 0x%x\n", vec);
-	}
-	/*
-	 * After servicing the interrupt,
-	 * we have to remove the status indicator.
-	 */
-	immr->im_cpic.cpic_cisr |= (1 << vec);
-}
-
-/*
- * The CPM can generate the error interrupt when there is a race
- * condition between generating and masking interrupts. All we have
- * to do is ACK it and return. This is a no-op function so we don't
- * need any special tests in the interrupt handler.
- */
-static void cpm_error_interrupt (void *dummy)
-{
-}
-
-/************************************************************************/
-/*
- * Install and free an interrupt handler
- */
-void irq_install_handler (int vec, interrupt_handler_t * handler,
-						  void *arg)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-	if ((vec & CPMVEC_OFFSET) != 0) {
-		/* CPM interrupt */
-		vec &= 0xffff;
-		if (cpm_vecs[vec].handler != NULL) {
-			printf ("CPM interrupt 0x%x replacing 0x%x\n",
-				(uint) handler,
-				(uint) cpm_vecs[vec].handler);
-		}
-		cpm_vecs[vec].handler = handler;
-		cpm_vecs[vec].arg = arg;
-		immr->im_cpic.cpic_cimr |= (1 << vec);
-#if 0
-		printf ("Install CPM interrupt for vector %d ==> %p\n",
-			vec, handler);
-#endif
-	} else {
-		/* SIU interrupt */
-		if (irq_vecs[vec].handler != NULL) {
-			printf ("SIU interrupt %d 0x%x replacing 0x%x\n",
-				vec,
-				(uint) handler,
-				(uint) cpm_vecs[vec].handler);
-		}
-		irq_vecs[vec].handler = handler;
-		irq_vecs[vec].arg = arg;
-		immr->im_siu_conf.sc_simask |= 1 << (31 - vec);
-#if 0
-		printf ("Install SIU interrupt for vector %d ==> %p\n",
-			vec, handler);
-#endif
-	}
-}
-
-void irq_free_handler (int vec)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-	if ((vec & CPMVEC_OFFSET) != 0) {
-		/* CPM interrupt */
-		vec &= 0xffff;
-#if 0
-		printf ("Free CPM interrupt for vector %d ==> %p\n",
-			vec, cpm_vecs[vec].handler);
-#endif
-		immr->im_cpic.cpic_cimr &= ~(1 << vec);
-		cpm_vecs[vec].handler = NULL;
-		cpm_vecs[vec].arg = NULL;
-	} else {
-		/* SIU interrupt */
-#if 0
-		printf ("Free CPM interrupt for vector %d ==> %p\n",
-			vec, cpm_vecs[vec].handler);
-#endif
-		immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec));
-		irq_vecs[vec].handler = NULL;
-		irq_vecs[vec].arg = NULL;
-	}
-}
-
-/************************************************************************/
-
-static void cpm_interrupt_init (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-	/*
-	 * Initialize the CPM interrupt controller.
-	 */
-
-	immr->im_cpic.cpic_cicr =
-		(CICR_SCD_SCC4 |
-		 CICR_SCC_SCC3 |
-		 CICR_SCB_SCC2 |
-		 CICR_SCA_SCC1) | ((CPM_INTERRUPT / 2) << 13) | CICR_HP_MASK;
-
-	immr->im_cpic.cpic_cimr = 0;
-
-	/*
-	 * Install the error handler.
-	 */
-	irq_install_handler (CPMVEC_ERROR, cpm_error_interrupt, NULL);
-
-	immr->im_cpic.cpic_cicr |= CICR_IEN;
-
-	/*
-	 * Install the cpm interrupt handler
-	 */
-	irq_install_handler (CPM_INTERRUPT, cpm_interrupt, NULL);
-}
-
-/************************************************************************/
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * Trivial implementation - no need to be really accurate.
- */
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#if 0
-	printf ("*** Timer Interrupt *** ");
-#endif
-	/* Reset Timer Expired and Timers Interrupt Status */
-	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-	__asm__ ("nop");
-	/*
-	  Clear TEXPS (and TMIST on older chips). SPLSS (on older
-	  chips) is cleared too.
-
-	  Bitwise OR is a read-modify-write operation so ALL bits
-	  which are cleared by writing `1' would be cleared by
-	  operations like
-
-	  immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
-
-	  The same can be achieved by simple writing of the PLPRCR
-	  to itself. If a bit value should be preserved, read the
-	  register, ZERO the bit and write, not OR, the result back.
-	*/
-	immr->im_clkrst.car_plprcr = immr->im_clkrst.car_plprcr;
-}
-
-/************************************************************************/
diff --git a/cpu/mpc8xx/kgdb.S b/cpu/mpc8xx/kgdb.S
deleted file mode 100644
index 2cc8fe6..0000000
--- a/cpu/mpc8xx/kgdb.S
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- *  Copyright (C) 2000	Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <command.h>
-#include <mpc8xx.h>
-#include <version.h>
-
-#define CONFIG_8xx 1		/* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_CMD_KGDB)
-
- /*
- * cache flushing routines for kgdb
- */
-
-	.globl	kgdb_flush_cache_all
-kgdb_flush_cache_all:
-	lis	r3, IDC_INVALL@h
-	mtspr	DC_CST, r3
-	sync
-	lis	r3, IDC_INVALL@h
-	mtspr	IC_CST, r3
-	SYNC
-	blr
-
-	.globl	kgdb_flush_cache_range
-kgdb_flush_cache_range:
-	li	r5,CONFIG_SYS_CACHELINE_SIZE-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,CONFIG_SYS_CACHELINE_SHIFT
-	beqlr
-	mtctr	r4
-	mr	r6,r3
-1:	dcbst	0,r3
-	addi	r3,r3,CONFIG_SYS_CACHELINE_SIZE
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	mtctr	r4
-2:	icbi	0,r6
-	addi	r6,r6,CONFIG_SYS_CACHELINE_SIZE
-	bdnz	2b
-	SYNC
-	blr
-
-#endif
diff --git a/cpu/mpc8xx/lcd.c b/cpu/mpc8xx/lcd.c
deleted file mode 100644
index 4b88b21..0000000
--- a/cpu/mpc8xx/lcd.c
+++ /dev/null
@@ -1,621 +0,0 @@
-/*
- * (C) Copyright 2001-2002
- * Wolfgang Denk, DENX Software Engineering -- wd@denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************************************/
-/* ** HEADER FILES							*/
-/************************************************************************/
-
-/* #define DEBUG */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include <watchdog.h>
-#include <version.h>
-#include <stdarg.h>
-#include <lcdvideo.h>
-#include <linux/types.h>
-#include <stdio_dev.h>
-#if defined(CONFIG_POST)
-#include <post.h>
-#endif
-#include <lcd.h>
-
-#ifdef CONFIG_LCD
-
-/************************************************************************/
-/* ** CONFIG STUFF -- should be moved to board config file		*/
-/************************************************************************/
-#ifndef CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO		/* Display Logo, (C) and system info	*/
-#endif
-
-#if defined(CONFIG_V37) || defined(CONFIG_EDT32F10)
-#undef CONFIG_LCD_LOGO
-#undef CONFIG_LCD_INFO
-#endif
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_KYOCERA_KCS057QV1AJ
-/*
- *  Kyocera KCS057QV1AJ-G23. Passive, color, single scan.
- */
-#define LCD_BPP	LCD_COLOR4
-
-vidinfo_t panel_info = {
-    640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
-    LCD_BPP, 1, 0, 1, 0,  5, 0, 0, 0
-		/* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_KYOCERA_KCS057QV1AJ */
-/*----------------------------------------------------------------------*/
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_HITACHI_SP19X001_Z1A
-/*
- *  Hitachi SP19X001-. Active, color, single scan.
- */
-vidinfo_t panel_info = {
-    640, 480, 154, 116, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
-    LCD_COLOR8, 1, 0, 1, 0, 0, 0, 0, 0
-		/* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_HITACHI_SP19X001_Z1A */
-/*----------------------------------------------------------------------*/
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_NEC_NL6448AC33
-/*
- *  NEC NL6448AC33-18. Active, color, single scan.
- */
-vidinfo_t panel_info = {
-    640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
-    3, 0, 0, 1, 1, 144, 2, 0, 33
-		/* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_NEC_NL6448AC33 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_NEC_NL6448BC20
-/*
- *  NEC NL6448BC20-08.  6.5", 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
-    640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
-    3, 0, 0, 1, 1, 144, 2, 0, 33
-		/* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_NEC_NL6448BC20 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_NEC_NL6448BC33_54
-/*
- *  NEC NL6448BC33-54. 10.4", 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
-    640, 480, 212, 158, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
-    3, 0, 0, 1, 1, 144, 2, 0, 33
-		/* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_NEC_NL6448BC33_54 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SHARP_LQ104V7DS01
-/*
- *  SHARP LQ104V7DS01. 6.5", 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
-    640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_LOW,
-    3, 0, 0, 1, 1, 25, 1, 0, 33
-		/* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_SHARP_LQ104V7DS01 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SHARP_16x9
-/*
- * Sharp 320x240. Active, color, single scan.  It isn't 16x9, and I am
- * not sure what it is.......
- */
-vidinfo_t panel_info = {
-    320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
-    3, 0, 0, 1, 1, 15, 4, 0, 3
-};
-#endif /* CONFIG_SHARP_16x9 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SHARP_LQ057Q3DC02
-/*
- * Sharp LQ057Q3DC02 display. Active, color, single scan.
- */
-#undef LCD_DF
-#define LCD_DF 12
-
-vidinfo_t panel_info = {
-    320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
-    3, 0, 0, 1, 1, 15, 4, 0, 3
-		/* wbl, vpw, lcdac, wbf */
-};
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#endif /* CONFIG_SHARP_LQ057Q3DC02 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SHARP_LQ64D341
-/*
- * Sharp LQ64D341 display, 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
-    640, 480, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
-    3, 0, 0, 1, 1, 128, 16, 0, 32
-		/* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_SHARP_LQ64D341 */
-
-#ifdef CONFIG_SHARP_LQ065T9DR51U
-/*
- * Sharp LQ065T9DR51U display, 400x240. Active, color, single scan.
- */
-vidinfo_t panel_info = {
-    400, 240, 143, 79, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
-    3, 0, 0, 1, 1, 248, 4, 0, 35
-		/* wbl, vpw, lcdac, wbf */
-};
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#endif /* CONFIG_SHARP_LQ065T9DR51U */
-
-#ifdef CONFIG_SHARP_LQ084V1DG21
-/*
- * Sharp LQ084V1DG21 display, 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
-    640, 480, 171, 129, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_LOW,
-    3, 0, 0, 1, 1, 160, 3, 0, 48
-		/* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_SHARP_LQ084V1DG21 */
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_HLD1045
-/*
- * HLD1045 display, 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
-    640, 480, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
-    3, 0, 0, 1, 1, 160, 3, 0, 48
-		/* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_HLD1045 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_PRIMEVIEW_V16C6448AC
-/*
- * Prime View V16C6448AC
- */
-vidinfo_t panel_info = {
-    640, 480, 130, 98, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
-    3, 0, 0, 1, 1, 144, 2, 0, 35
-		/* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_PRIMEVIEW_V16C6448AC */
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_OPTREX_BW
-/*
- * Optrex   CBL50840-2 NF-FW 99 22 M5
- * or
- * Hitachi  LMG6912RPFC-00T
- * or
- * Hitachi  SP14Q002
- *
- * 320x240. Black & white.
- */
-#define OPTREX_BPP	0	/* 0 - monochrome,     1 bpp */
-				/* 1 -  4 grey levels, 2 bpp */
-				/* 2 - 16 grey levels, 4 bpp */
-vidinfo_t panel_info = {
-    320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
-    OPTREX_BPP, 0, 0, 0, 0, 0, 0, 0, 0, 4
-};
-#endif /* CONFIG_OPTREX_BW */
-
-/*-----------------------------------------------------------------*/
-#ifdef CONFIG_EDT32F10
-/*
- * Emerging Display Technologies 320x240. Passive, monochrome, single scan.
- */
-#define LCD_BPP		LCD_MONOCHROME
-#define LCD_DF		10
-
-vidinfo_t panel_info = {
-    320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
-    LCD_BPP,  0, 0, 0, 0, 33, 0, 0, 0
-};
-#endif
-/*----------------------------------------------------------------------*/
-
-
-int lcd_line_length;
-
-int lcd_color_fg;
-int lcd_color_bg;
-
-/*
- * Frame buffer memory information
- */
-void *lcd_base;			/* Start of framebuffer memory	*/
-void *lcd_console_address;	/* Start of console buffer	*/
-
-short console_col;
-short console_row;
-
-/************************************************************************/
-
-void lcd_ctrl_init (void *lcdbase);
-void lcd_enable (void);
-#if LCD_BPP == LCD_COLOR8
-void lcd_setcolreg (ushort regno,
-				ushort red, ushort green, ushort blue);
-#endif
-#if LCD_BPP == LCD_MONOCHROME
-void lcd_initcolregs (void);
-#endif
-
-#if defined(CONFIG_RBC823)
-void lcd_disable (void);
-#endif
-
-/************************************************************************/
-
-/************************************************************************/
-/* ----------------- chipset specific functions ----------------------- */
-/************************************************************************/
-
-/*
- * Calculate fb size for VIDEOLFB_ATAG.
- */
-ulong calc_fbsize (void)
-{
-	ulong size;
-	int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
-
-	size = line_length * panel_info.vl_row;
-
-	return size;
-}
-
-void lcd_ctrl_init (void *lcdbase)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile lcd823_t *lcdp = &immr->im_lcd;
-
-	uint lccrtmp;
-	uint lchcr_hpc_tmp;
-
-	/* Initialize the LCD control register according to the LCD
-	 * parameters defined.  We do everything here but enable
-	 * the controller.
-	 */
-
-#ifdef CONFIG_RPXLITE
-	/* This is special for RPXlite_DW Software Development Platform **[Sam]** */
-	panel_info.vl_dp = CONFIG_SYS_LOW;
-#endif
-
-	lccrtmp  = LCDBIT (LCCR_BNUM_BIT,
-		   (((panel_info.vl_row * panel_info.vl_col) * (1 << LCD_BPP)) / 128));
-
-	lccrtmp |= LCDBIT (LCCR_CLKP_BIT, panel_info.vl_clkp)	|
-		   LCDBIT (LCCR_OEP_BIT,  panel_info.vl_oep)	|
-		   LCDBIT (LCCR_HSP_BIT,  panel_info.vl_hsp)	|
-		   LCDBIT (LCCR_VSP_BIT,  panel_info.vl_vsp)	|
-		   LCDBIT (LCCR_DP_BIT,   panel_info.vl_dp)	|
-		   LCDBIT (LCCR_BPIX_BIT, panel_info.vl_bpix)	|
-		   LCDBIT (LCCR_LBW_BIT,  panel_info.vl_lbw)	|
-		   LCDBIT (LCCR_SPLT_BIT, panel_info.vl_splt)	|
-		   LCDBIT (LCCR_CLOR_BIT, panel_info.vl_clor)	|
-		   LCDBIT (LCCR_TFT_BIT,  panel_info.vl_tft);
-
-#if 0
-	lccrtmp |= ((SIU_LEVEL5 / 2) << 12);
-	lccrtmp |= LCCR_EIEN;
-#endif
-
-	lcdp->lcd_lccr = lccrtmp;
-	lcdp->lcd_lcsr = 0xFF;		/* Clear pending interrupts */
-
-	/* Initialize LCD controller bus priorities.
-	 */
-#ifdef CONFIG_RBC823
-	immr->im_siu_conf.sc_sdcr = (immr->im_siu_conf.sc_sdcr & ~0x0f) | 1;	/* RAID = 01, LAID = 00 */
-#else
-	immr->im_siu_conf.sc_sdcr &= ~0x0f;	/* RAID = LAID = 0 */
-
-	/* set SHFT/CLOCK division factor 4
-	 * This needs to be set based upon display type and processor
-	 * speed.  The TFT displays run about 20 to 30 MHz.
-	 * I was running 64 MHz processor speed.
-	 * The value for this divider must be chosen so the result is
-	 * an integer of the processor speed (i.e., divide by 3 with
-	 * 64 MHz would be bad).
-	 */
-	immr->im_clkrst.car_sccr &= ~0x1F;
-	immr->im_clkrst.car_sccr |= LCD_DF;	/* was 8 */
-
-#endif /* CONFIG_RBC823 */
-
-#if defined(CONFIG_RBC823)
-	/* Enable LCD on port D.
-	 */
-	immr->im_ioport.iop_pddat &= 0x0300;
-	immr->im_ioport.iop_pdpar |= 0x1CFF;
-	immr->im_ioport.iop_pddir |= 0x1CFF;
-
-	/* Configure LCD_ON, VEE_ON, CCFL_ON on port B.
-	 */
-	immr->im_cpm.cp_pbdat &= ~0x00005001;
-	immr->im_cpm.cp_pbpar &= ~0x00005001;
-	immr->im_cpm.cp_pbdir |=  0x00005001;
-#elif !defined(CONFIG_EDT32F10)
-	/* Enable LCD on port D.
-	 */
-	immr->im_ioport.iop_pdpar |= 0x1FFF;
-	immr->im_ioport.iop_pddir |= 0x1FFF;
-
-	/* Enable LCD_A/B/C on port B.
-	 */
-	immr->im_cpm.cp_pbpar |= 0x00005001;
-	immr->im_cpm.cp_pbdir |= 0x00005001;
-#else
-	/* Enable LCD on port D.
-	 */
-	immr->im_ioport.iop_pdpar |= 0x1DFF;
-	immr->im_ioport.iop_pdpar &= ~0x0200;
-	immr->im_ioport.iop_pddir |= 0x1FFF;
-	immr->im_ioport.iop_pddat |= 0x0200;
-#endif
-
-	/* Load the physical address of the linear frame buffer
-	 * into the LCD controller.
-	 * BIG NOTE:  This has to be modified to load A and B depending
-	 * upon the split mode of the LCD.
-	 */
-	lcdp->lcd_lcfaa = (ulong)lcd_base;
-	lcdp->lcd_lcfba = (ulong)lcd_base;
-
-	/* MORE HACKS...This must be updated according to 823 manual
-	 * for different panels.
-	 * Udi Finkelstein - done - see below:
-	 * Note: You better not try unsupported combinations such as
-	 * 4-bit wide passive dual scan LCD at 4/8 Bit color.
-	 */
-	lchcr_hpc_tmp =
-		(panel_info.vl_col *
-		 (panel_info.vl_tft ? 8 :
-			(((2 - panel_info.vl_lbw) << /* 4 bit=2, 8-bit = 1 */
-			 /* use << to mult by: single scan = 1, dual scan = 2 */
-			  panel_info.vl_splt) *
-			 (panel_info.vl_bpix | 1)))) >> 3; /* 2/4 BPP = 1, 8/16 BPP = 3 */
-
-	lcdp->lcd_lchcr = LCHCR_BO |
-			  LCDBIT (LCHCR_AT_BIT, 4) |
-			  LCDBIT (LCHCR_HPC_BIT, lchcr_hpc_tmp) |
-			  panel_info.vl_wbl;
-
-	lcdp->lcd_lcvcr = LCDBIT (LCVCR_VPW_BIT, panel_info.vl_vpw) |
-			  LCDBIT (LCVCR_LCD_AC_BIT, panel_info.vl_lcdac) |
-			  LCDBIT (LCVCR_VPC_BIT, panel_info.vl_row) |
-			  panel_info.vl_wbf;
-
-}
-
-/*----------------------------------------------------------------------*/
-
-#ifdef	NOT_USED_SO_FAR
-static void
-lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile cpm8xx_t *cp = &(immr->im_cpm);
-	unsigned short colreg, *cmap_ptr;
-
-	cmap_ptr = (unsigned short *)&cp->lcd_cmap[regno * 2];
-
-	colreg = *cmap_ptr;
-#ifdef	CONFIG_SYS_INVERT_COLORS
-	colreg ^= 0x0FFF;
-#endif
-
-	*red   = (colreg >> 8) & 0x0F;
-	*green = (colreg >> 4) & 0x0F;
-	*blue  =  colreg       & 0x0F;
-}
-#endif	/* NOT_USED_SO_FAR */
-
-/*----------------------------------------------------------------------*/
-
-#if LCD_BPP == LCD_COLOR8
-void
-lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile cpm8xx_t *cp = &(immr->im_cpm);
-	unsigned short colreg, *cmap_ptr;
-
-	cmap_ptr = (unsigned short *)&cp->lcd_cmap[regno * 2];
-
-	colreg = ((red   & 0x0F) << 8) |
-		 ((green & 0x0F) << 4) |
-		  (blue  & 0x0F) ;
-#ifdef	CONFIG_SYS_INVERT_COLORS
-	colreg ^= 0x0FFF;
-#endif
-	*cmap_ptr = colreg;
-
-	debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %02X%02X\n",
-		regno, &(cp->lcd_cmap[regno * 2]),
-		red, green, blue,
-		cp->lcd_cmap[ regno * 2 ], cp->lcd_cmap[(regno * 2) + 1]);
-}
-#endif	/* LCD_COLOR8 */
-
-/*----------------------------------------------------------------------*/
-
-#if LCD_BPP == LCD_MONOCHROME
-static
-void lcd_initcolregs (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile cpm8xx_t *cp = &(immr->im_cpm);
-	ushort regno;
-
-	for (regno = 0; regno < 16; regno++) {
-		cp->lcd_cmap[regno * 2] = 0;
-		cp->lcd_cmap[(regno * 2) + 1] = regno & 0x0f;
-	}
-}
-#endif
-
-/*----------------------------------------------------------------------*/
-
-void lcd_enable (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile lcd823_t *lcdp = &immr->im_lcd;
-
-	/* Enable the LCD panel */
-#ifndef CONFIG_RBC823
-	immr->im_siu_conf.sc_sdcr |= (1 << (31 - 25));		/* LAM = 1 */
-#endif
-	lcdp->lcd_lccr |= LCCR_PON;
-
-#ifdef CONFIG_V37
-	/* Turn on display backlight */
-	immr->im_cpm.cp_pbpar |= 0x00008000;
-	immr->im_cpm.cp_pbdir |= 0x00008000;
-#elif defined(CONFIG_RBC823)
-	/* Turn on display backlight */
-	immr->im_cpm.cp_pbdat |= 0x00004000;
-#endif
-
-#if defined(CONFIG_LWMON)
-    {	uchar c = pic_read (0x60);
-#if defined(CONFIG_LCD) && defined(CONFIG_LWMON) && (CONFIG_POST & CONFIG_SYS_POST_SYSMON)
-	/* Enable LCD later in sysmon test, only if temperature is OK */
-#else
-	c |= 0x07;	/* Power on CCFL, Enable CCFL, Chip Enable LCD */
-#endif
-	pic_write (0x60, c);
-    }
-#endif /* CONFIG_LWMON */
-
-#if defined(CONFIG_R360MPI)
-    {
-	extern void r360_i2c_lcd_write (uchar data0, uchar data1);
-	unsigned long bgi, ctr;
-	char *p;
-
-	if ((p = getenv("lcdbgi")) != NULL) {
-		bgi = simple_strtoul (p, 0, 10) & 0xFFF;
-	} else {
-		bgi = 0xFFF;
-	}
-
-	if ((p = getenv("lcdctr")) != NULL) {
-		ctr = simple_strtoul (p, 0, 10) & 0xFFF;
-	} else {
-		ctr=0x7FF;
-	}
-
-	r360_i2c_lcd_write(0x10, 0x01);
-	r360_i2c_lcd_write(0x20, 0x01);
-	r360_i2c_lcd_write(0x30 | ((bgi>>8) & 0xF), bgi & 0xFF);
-	r360_i2c_lcd_write(0x40 | ((ctr>>8) & 0xF), ctr & 0xFF);
-    }
-#endif /* CONFIG_R360MPI */
-#ifdef CONFIG_RBC823
-	udelay(200000); /* wait 200ms */
-	/* Turn VEE_ON first */
-	immr->im_cpm.cp_pbdat |= 0x00000001;
-	udelay(200000); /* wait 200ms */
-	/* Now turn on LCD_ON */
-	immr->im_cpm.cp_pbdat |= 0x00001000;
-#endif
-#ifdef CONFIG_RRVISION
-	debug ("PC4->Output(1): enable LVDS\n");
-	debug ("PC5->Output(0): disable PAL clock\n");
-	immr->im_ioport.iop_pddir |=  0x1000;
-	immr->im_ioport.iop_pcpar &= ~(0x0C00);
-	immr->im_ioport.iop_pcdir |=   0x0C00 ;
-	immr->im_ioport.iop_pcdat |=   0x0800 ;
-	immr->im_ioport.iop_pcdat &= ~(0x0400);
-	debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
-	       immr->im_ioport.iop_pdpar,
-	       immr->im_ioport.iop_pddir,
-	       immr->im_ioport.iop_pddat);
-	debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
-	       immr->im_ioport.iop_pcpar,
-	       immr->im_ioport.iop_pcdir,
-	       immr->im_ioport.iop_pcdat);
-#endif
-}
-
-/*----------------------------------------------------------------------*/
-
-#if defined (CONFIG_RBC823)
-void lcd_disable (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile lcd823_t *lcdp = &immr->im_lcd;
-
-#if defined(CONFIG_LWMON)
-    {	uchar c = pic_read (0x60);
-	c &= ~0x07;	/* Power off CCFL, Disable CCFL, Chip Disable LCD */
-	pic_write (0x60, c);
-    }
-#elif defined(CONFIG_R360MPI)
-    {
-	extern void r360_i2c_lcd_write (uchar data0, uchar data1);
-
-	r360_i2c_lcd_write(0x10, 0x00);
-	r360_i2c_lcd_write(0x20, 0x00);
-	r360_i2c_lcd_write(0x30, 0x00);
-	r360_i2c_lcd_write(0x40, 0x00);
-    }
-#endif /* CONFIG_LWMON */
-	/* Disable the LCD panel */
-	lcdp->lcd_lccr &= ~LCCR_PON;
-#ifdef CONFIG_RBC823
-	/* Turn off display backlight, VEE and LCD_ON */
-	immr->im_cpm.cp_pbdat &= ~0x00005001;
-#else
-	immr->im_siu_conf.sc_sdcr &= ~(1 << (31 - 25));	/* LAM = 0 */
-#endif /* CONFIG_RBC823 */
-}
-#endif	/* NOT_USED_SO_FAR || CONFIG_RBC823 */
-
-
-/************************************************************************/
-
-#endif /* CONFIG_LCD */
diff --git a/cpu/mpc8xx/plprcr_write.S b/cpu/mpc8xx/plprcr_write.S
deleted file mode 100644
index e325671..0000000
--- a/cpu/mpc8xx/plprcr_write.S
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <mpc8xx.h>
-#include <ppc_asm.tmpl>
-#include <asm/cache.h>
-
-#define CACHE_CMD_ENABLE	0x02000000
-#define CACHE_CMD_DISABLE	0x04000000
-#define CACHE_CMD_LOAD_LOCK	0x06000000
-#define CACHE_CMD_UNLOCK_LINE	0x08000000
-#define CACHE_CMD_UNLOCK_ALL	0x0A000000
-#define CACHE_CMD_INVALIDATE	0x0C000000
-#define SPEED_PLPRCR_WAIT_5CYC	150
-#define _CACHE_ALIGN_SIZE	16
-
-
-	.text
-	.align 2
-	.globl plprcr_write_866
-
-/*
- * void plprcr_write_866 (long plprcr)
- * Write PLPRCR, including workaround for device errata SIU4 and SIU9.
- */
-
-plprcr_write_866:
-	mfspr	r10, LR		/* save the Link Register value */
-
-	/* turn instruction cache on (no MMU required for instructions)
-	 */
-	lis	r4, CACHE_CMD_ENABLE@h
-	ori	r4, r4, CACHE_CMD_ENABLE@l
-	mtspr	IC_CST, r4
-	isync
-
-	/* clear IC_CST error bits
-	 */
-	mfspr	r4, IC_CST
-
-	bl	plprcr_here
-
-plprcr_here:
-	mflr	r5
-
-	/* calculate relocation offset
-	 */
-	lis	r4, plprcr_here@h
-	ori	r4, r4, plprcr_here@l
-	sub	r5, r5, r4
-
-	/* calculate first address of this function
-	 */
-	lis	r6, plprcr_write_866@h
-	ori	r6, r6, plprcr_write_866@l
-	add	r6, r6, r5
-
-	/* calculate end address of this function
-	 */
-	lis	r7, plprcr_end@h
-	ori	r7, r7, plprcr_end@l
-	add	r7, r7, r5
-
-	/* load and lock code addresses
-	 */
-	mr	r5, r6
-
-plprcr_loop:
-	mtspr	IC_ADR, r5
-	addi	r5, r5, _CACHE_ALIGN_SIZE	/* increment by one line */
-
-	lis	r4, CACHE_CMD_LOAD_LOCK@h
-	ori	r4, r4, CACHE_CMD_LOAD_LOCK@l
-	mtspr	IC_CST, r4
-	isync
-
-	cmpw	r5, r7
-	blt	plprcr_loop
-
-	/* IC_CST error bits not evaluated
-	 */
-
-	/* switch PLPRCR
-	 */
-	mfspr	r4, IMMR		/* read IMMR */
-	rlwinm	r4, r4, 0, 0, 15	/* only high 16 bits count */
-
-	/* write sequence according to MPC866 Errata
-	 */
-	stw	r3, PLPRCR(r4)
-	isync
-
-	lis	r3, SPEED_PLPRCR_WAIT_5CYC@h
-	ori	r3, r3, SPEED_PLPRCR_WAIT_5CYC@l
-
-plprcr_wait:
-	cmpwi	r3, 0
-	beq	plprcr_wait_end
-	nop
-	subi	r3, r3, 1
-	b	plprcr_wait
-
-plprcr_wait_end:
-
-	/* unlock instruction cache but leave it enabled
-	 */
-	lis	r4, CACHE_CMD_UNLOCK_ALL@h
-	ori	r4, r4, CACHE_CMD_UNLOCK_ALL@l
-	mtspr	IC_CST, r4
-	isync
-
-	mtspr	LR, r10		/* restore original Link Register value */
-	blr
-
-plprcr_end:
diff --git a/cpu/mpc8xx/scc.c b/cpu/mpc8xx/scc.c
deleted file mode 100644
index effb967..0000000
--- a/cpu/mpc8xx/scc.c
+++ /dev/null
@@ -1,572 +0,0 @@
-/*
- * File:  scc.c
- * Description:
- *	Basic ET HW initialization and packet RX/TX routines
- *
- * NOTE  <<<IMPORTANT:  PLEASE READ>>>:
- *     Do not cache Rx/Tx buffers!
- */
-
-/*
- * MPC823 <-> MC68160 Connections:
- *
- * Setup MPC823 to work with MC68160 Enhanced Ethernet
- * Serial Tranceiver as follows:
- *
- * MPC823 Signal                MC68160  Comments
- * ------ ------                -------  --------
- * PA-12 ETHTX    -------->   TX       Eth. Port Transmit Data
- * PB-18 E_TENA   -------->   TENA     Eth. Transmit Port Enable
- * PA-5 ETHTCK    <--------   TCLK     Eth. Port Transmit Clock
- * PA-13 ETHRX    <--------   RX       Eth. Port Receive Data
- * PC-8 E_RENA    <--------   RENA     Eth. Receive Enable
- * PA-6 ETHRCK    <--------   RCLK     Eth. Port Receive Clock
- * PC-9 E_CLSN    <--------   CLSN     Eth. Port Collision Indication
- *
- * FADS Board Signal              MC68160  Comments
- * -----------------              -------  --------
- * (BCSR1) ETHEN*     -------->  CS2      Eth. Port Enable
- * (BSCR4) TPSQEL*    -------->  TPSQEL   Twisted Pair Signal Quality Error Test Enable
- * (BCSR4) TPFLDL*    -------->  TPFLDL   Twisted Pair Full-Duplex
- * (BCSR4) ETHLOOP    -------->  LOOP     Eth. Port Diagnostic Loop-Back
- *
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <commproc.h>
-#include <net.h>
-#include <command.h>
-
-#if defined(CONFIG_CMD_NET) && defined(SCC_ENET)
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH  1520
-
-#define TX_BUF_CNT 2
-
-#define TOUT_LOOP 10000	/* 10 ms to have a packet sent */
-
-static char txbuf[DBUF_LENGTH];
-
-static uint rxIdx;	/* index of the current RX buffer */
-static uint txIdx;	/* index of the current TX buffer */
-
-/*
-  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
-  *  immr->udata_bd address on Dual-Port RAM
-  * Provide for Double Buffering
-  */
-
-typedef volatile struct CommonBufferDescriptor {
-    cbd_t rxbd[PKTBUFSRX];	/* Rx BD */
-    cbd_t txbd[TX_BUF_CNT];	/* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx;
-
-static int scc_send(struct eth_device* dev, volatile void *packet, int length);
-static int scc_recv(struct eth_device* dev);
-static int scc_init (struct eth_device* dev, bd_t * bd);
-static void scc_halt(struct eth_device* dev);
-
-int scc_initialize(bd_t *bis)
-{
-	struct eth_device* dev;
-
-	dev = (struct eth_device*) malloc(sizeof *dev);
-	memset(dev, 0, sizeof *dev);
-
-	sprintf(dev->name, "SCC ETHERNET");
-	dev->iobase = 0;
-	dev->priv   = 0;
-	dev->init   = scc_init;
-	dev->halt   = scc_halt;
-	dev->send   = scc_send;
-	dev->recv   = scc_recv;
-
-	eth_register(dev);
-
-	return 1;
-}
-
-static int scc_send(struct eth_device* dev, volatile void *packet, int length)
-{
-	int i, j=0;
-#if 0
-	volatile char *in, *out;
-#endif
-
-	/* section 16.9.23.3
-	 * Wait for ready
-	 */
-#if 0
-	while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY);
-	out = (char *)(rtx->txbd[txIdx].cbd_bufaddr);
-	in = packet;
-	for(i = 0; i < length; i++) {
-		*out++ = *in++;
-	}
-	rtx->txbd[txIdx].cbd_datlen = length;
-	rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST);
-	while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) j++;
-
-#ifdef ET_DEBUG
-	printf("cycles: %d    status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
-#endif
-	i = (rtx->txbd[txIdx++].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
-
-	/* wrap around buffer index when necessary */
-	if (txIdx >= TX_BUF_CNT) txIdx = 0;
-#endif
-
-	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
-		udelay (1);	/* will also trigger Wd if needed */
-		j++;
-	}
-	if (j>=TOUT_LOOP) printf("TX not ready\n");
-	rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
-	rtx->txbd[txIdx].cbd_datlen = length;
-	rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |BD_ENET_TX_WRAP);
-	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
-		udelay (1);	/* will also trigger Wd if needed */
-		j++;
-	}
-	if (j>=TOUT_LOOP) printf("TX timeout\n");
-#ifdef ET_DEBUG
-	printf("cycles: %d    status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
-#endif
-	i = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
-	return i;
-}
-
-static int scc_recv (struct eth_device *dev)
-{
-	int length;
-
-	for (;;) {
-		/* section 16.9.23.2 */
-		if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
-			length = -1;
-			break;	/* nothing received - leave for() loop */
-		}
-
-		length = rtx->rxbd[rxIdx].cbd_datlen;
-
-		if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
-#ifdef ET_DEBUG
-			printf ("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
-#endif
-		} else {
-			/* Pass the packet up to the protocol layers. */
-			NetReceive (NetRxPackets[rxIdx], length - 4);
-		}
-
-
-		/* Give the buffer back to the SCC. */
-		rtx->rxbd[rxIdx].cbd_datlen = 0;
-
-		/* wrap around buffer index when necessary */
-		if ((rxIdx + 1) >= PKTBUFSRX) {
-			rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
-				(BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
-			rxIdx = 0;
-		} else {
-			rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
-			rxIdx++;
-		}
-	}
-	return length;
-}
-
-/**************************************************************
-  *
-  * SCC Ethernet Initialization Routine
-  *
-  *************************************************************/
-
-static int scc_init (struct eth_device *dev, bd_t * bis)
-{
-
-	int i;
-	scc_enet_t *pram_ptr;
-
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#if defined(CONFIG_LWMON)
-	reset_phy();
-#endif
-
-#ifdef CONFIG_FADS
-#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC860T)
-	/* The MPC86xADS/FADS860T don't use the MODEM_EN or DATA_VOICE signals. */
-	*((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
-	*((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL;
-	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#else
-	*((uint *) BCSR4) &= ~(BCSR4_ETHLOOP | BCSR4_MODEM_EN);
-	*((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL | BCSR4_DATA_VOICE;
-	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#endif
-#endif
-
-	pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[PROFF_ENET]);
-
-	rxIdx = 0;
-	txIdx = 0;
-
-	if (!rtx) {
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-		rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
-				 dpram_alloc_align (sizeof (RTXBD), 8));
-#else
-		rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
-#endif
-	}
-
-#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
-	/* Configure port A pins for Txd and Rxd.
-	 */
-	immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
-	immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
-	immr->im_ioport.iop_paodr &= ~PA_ENET_TXD;
-#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
-	/* Configure port B pins for Txd and Rxd.
-	 */
-	immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
-	immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
-	immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
-#else
-#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
-#endif
-
-#if defined(PC_ENET_LBK)
-	/* Configure port C pins to disable External Loopback
-	 */
-	immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
-	immr->im_ioport.iop_pcdir |= PC_ENET_LBK;
-	immr->im_ioport.iop_pcso &= ~PC_ENET_LBK;
-	immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK;	/* Disable Loopback */
-#endif /* PC_ENET_LBK */
-
-	/* Configure port C pins to enable CLSN and RENA.
-	 */
-	immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-	immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-	immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
-
-	/* Configure port A for TCLK and RCLK.
-	 */
-	immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
-	immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
-
-	/*
-	 * Configure Serial Interface clock routing -- see section 16.7.5.3
-	 * First, clear all SCC bits to zero, then set the ones we want.
-	 */
-
-	immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK;
-	immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT;
-
-
-	/*
-	 * Initialize SDCR -- see section 16.9.23.7
-	 * SDMA configuration register
-	 */
-	immr->im_siu_conf.sc_sdcr = 0x01;
-
-
-	/*
-	 * Setup SCC Ethernet Parameter RAM
-	 */
-
-	pram_ptr->sen_genscc.scc_rfcr = 0x18;	/* Normal Operation and Mot byte ordering */
-	pram_ptr->sen_genscc.scc_tfcr = 0x18;	/* Mot byte ordering, Normal access */
-
-	pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH;	/* max. ET package len 1520 */
-
-	pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]);	/* Set RXBD tbl start at Dual Port */
-	pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]);	/* Set TXBD tbl start at Dual Port */
-
-	/*
-	 * Setup Receiver Buffer Descriptors (13.14.24.18)
-	 * Settings:
-	 *     Empty, Wrap
-	 */
-
-	for (i = 0; i < PKTBUFSRX; i++) {
-		rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
-		rtx->rxbd[i].cbd_datlen = 0;	/* Reset */
-		rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
-	}
-
-	rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
-	/*
-	 * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
-	 * Settings:
-	 *    Add PADs to Short FRAMES, Wrap, Last, Tx CRC
-	 */
-
-	for (i = 0; i < TX_BUF_CNT; i++) {
-		rtx->txbd[i].cbd_sc =
-			(BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-		rtx->txbd[i].cbd_datlen = 0;	/* Reset */
-		rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
-	}
-
-	rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
-	/*
-	 * Enter Command:  Initialize Rx Params for SCC
-	 */
-
-	do {			/* Spin until ready to issue command    */
-		__asm__ ("eieio");
-	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-	/* Issue command */
-	immr->im_cpm.cp_cpcr =
-		((CPM_CR_INIT_RX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
-	do {			/* Spin until command processed         */
-		__asm__ ("eieio");
-	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-	/*
-	 * Ethernet Specific Parameter RAM
-	 *     see table 13-16, pg. 660,
-	 *     pg. 681 (example with suggested settings)
-	 */
-
-	pram_ptr->sen_cpres = ~(0x0);	/* Preset CRC */
-	pram_ptr->sen_cmask = 0xdebb20e3;	/* Constant Mask for CRC */
-	pram_ptr->sen_crcec = 0x0;	/* Error Counter CRC (unused) */
-	pram_ptr->sen_alec = 0x0;	/* Alignment Error Counter (unused) */
-	pram_ptr->sen_disfc = 0x0;	/* Discard Frame Counter (unused) */
-	pram_ptr->sen_pads = 0x8888;	/* Short Frame PAD Characters */
-
-	pram_ptr->sen_retlim = 15;	/* Retry Limit Threshold */
-	pram_ptr->sen_maxflr = 1518;	/* MAX Frame Length Register */
-	pram_ptr->sen_minflr = 64;	/* MIN Frame Length Register */
-
-	pram_ptr->sen_maxd1 = DBUF_LENGTH;	/* MAX DMA1 Length Register */
-	pram_ptr->sen_maxd2 = DBUF_LENGTH;	/* MAX DMA2 Length Register */
-
-	pram_ptr->sen_gaddr1 = 0x0;	/* Group Address Filter 1 (unused) */
-	pram_ptr->sen_gaddr2 = 0x0;	/* Group Address Filter 2 (unused) */
-	pram_ptr->sen_gaddr3 = 0x0;	/* Group Address Filter 3 (unused) */
-	pram_ptr->sen_gaddr4 = 0x0;	/* Group Address Filter 4 (unused) */
-
-#define ea eth_get_dev()->enetaddr
-	pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
-	pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
-	pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
-#undef ea
-
-	pram_ptr->sen_pper = 0x0;	/* Persistence (unused) */
-	pram_ptr->sen_iaddr1 = 0x0;	/* Individual Address Filter 1 (unused) */
-	pram_ptr->sen_iaddr2 = 0x0;	/* Individual Address Filter 2 (unused) */
-	pram_ptr->sen_iaddr3 = 0x0;	/* Individual Address Filter 3 (unused) */
-	pram_ptr->sen_iaddr4 = 0x0;	/* Individual Address Filter 4 (unused) */
-	pram_ptr->sen_taddrh = 0x0;	/* Tmp Address (MSB) (unused) */
-	pram_ptr->sen_taddrm = 0x0;	/* Tmp Address (unused) */
-	pram_ptr->sen_taddrl = 0x0;	/* Tmp Address (LSB) (unused) */
-
-	/*
-	 * Enter Command:  Initialize Tx Params for SCC
-	 */
-
-	do {			/* Spin until ready to issue command    */
-		__asm__ ("eieio");
-	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-	/* Issue command */
-	immr->im_cpm.cp_cpcr =
-		((CPM_CR_INIT_TX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
-	do {			/* Spin until command processed         */
-		__asm__ ("eieio");
-	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-	/*
-	 * Mask all Events in SCCM - we use polling mode
-	 */
-	immr->im_cpm.cp_scc[SCC_ENET].scc_sccm = 0;
-
-	/*
-	 * Clear Events in SCCE -- Clear bits by writing 1's
-	 */
-
-	immr->im_cpm.cp_scc[SCC_ENET].scc_scce = ~(0x0);
-
-
-	/*
-	 * Initialize GSMR High 32-Bits
-	 * Settings:  Normal Mode
-	 */
-
-	immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrh = 0;
-
-	/*
-	 * Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive
-	 * Settings:
-	 *     TCI = Invert
-	 *     TPL =  48 bits
-	 *     TPP = Repeating 10's
-	 *     MODE = Ethernet
-	 */
-
-	immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl = (SCC_GSMRL_TCI |
-						   SCC_GSMRL_TPL_48 |
-						   SCC_GSMRL_TPP_10 |
-						   SCC_GSMRL_MODE_ENET);
-
-	/*
-	 * Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4
-	 */
-
-	immr->im_cpm.cp_scc[SCC_ENET].scc_dsr = 0xd555;
-
-	/*
-	 * Initialize the PSMR
-	 * Settings:
-	 *  CRC = 32-Bit CCITT
-	 *  NIB = Begin searching for SFD 22 bits after RENA
-	 *  FDE = Full Duplex Enable
-	 *  LPB = Loopback Enable (Needed when FDE is set)
-	 *  BRO = Reject broadcast packets
-	 *  PROMISCOUS = Catch all packets regardless of dest. MAC adress
-	 */
-	immr->im_cpm.cp_scc[SCC_ENET].scc_psmr = SCC_PSMR_ENCRC |
-		SCC_PSMR_NIB22 |
-#if defined(CONFIG_SCC_ENET_FULL_DUPLEX)
-		SCC_PSMR_FDE | SCC_PSMR_LPB |
-#endif
-#if defined(CONFIG_SCC_ENET_NO_BROADCAST)
-		SCC_PSMR_BRO |
-#endif
-#if defined(CONFIG_SCC_ENET_PROMISCOUS)
-		SCC_PSMR_PRO |
-#endif
-		0;
-
-	/*
-	 * Configure Ethernet TENA Signal
-	 */
-
-#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
-	immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
-	immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
-#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
-	immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
-	immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
-#else
-#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
-#endif
-
-#if defined(CONFIG_ADS) && defined(CONFIG_MPC860)
-	/*
-	 * Port C is used to control the PHY,MC68160.
-	 */
-	immr->im_ioport.iop_pcdir |=
-		(PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL);
-
-	immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL;
-	immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL);
-	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#endif /* MPC860ADS */
-
-#if defined(CONFIG_AMX860)
-	/*
-	 * Port B is used to control the PHY,MC68160.
-	 */
-	immr->im_cpm.cp_pbdir |=
-		(PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
-
-	immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
-	immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
-
-	immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
-	immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
-#endif /* AMX860 */
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
-	*((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
-#endif
-
-#ifdef CONFIG_RPXLITE
-	*((uchar *) BCSR0) |= BCSR0_ETHEN;
-#endif
-
-#if defined(CONFIG_QS860T)
-	/*
-	 * PB27=FDE-, set output low for full duplex
-	 * PB26=Link Test Enable, normally high output
-	 */
-	immr->im_cpm.cp_pbdir |= 0x00000030;
-	immr->im_cpm.cp_pbdat |= 0x00000020;
-	immr->im_cpm.cp_pbdat &= ~0x00000010;
-#endif /* QS860T */
-
-#ifdef CONFIG_MBX
-	board_ether_init ();
-#endif
-
-#if defined(CONFIG_NETVIA)
-#if defined(PA_ENET_PDN)
-	immr->im_ioport.iop_papar &= ~PA_ENET_PDN;
-	immr->im_ioport.iop_padir |= PA_ENET_PDN;
-	immr->im_ioport.iop_padat |= PA_ENET_PDN;
-#elif defined(PB_ENET_PDN)
-	immr->im_cpm.cp_pbpar &= ~PB_ENET_PDN;
-	immr->im_cpm.cp_pbdir |= PB_ENET_PDN;
-	immr->im_cpm.cp_pbdat |= PB_ENET_PDN;
-#elif defined(PC_ENET_PDN)
-	immr->im_ioport.iop_pcpar &= ~PC_ENET_PDN;
-	immr->im_ioport.iop_pcdir |= PC_ENET_PDN;
-	immr->im_ioport.iop_pcdat |= PC_ENET_PDN;
-#elif defined(PD_ENET_PDN)
-	immr->im_ioport.iop_pdpar &= ~PD_ENET_PDN;
-	immr->im_ioport.iop_pddir |= PD_ENET_PDN;
-	immr->im_ioport.iop_pddat |= PD_ENET_PDN;
-#endif
-#endif
-
-	/*
-	 * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive
-	 */
-
-	immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
-		(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	/*
-	 * Work around transmit problem with first eth packet
-	 */
-#if defined (CONFIG_FADS)
-	udelay (10000);		/* wait 10 ms */
-#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
-	udelay (100000);	/* wait 100 ms */
-#endif
-
-	return 1;
-}
-
-
-static void scc_halt (struct eth_device *dev)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-	immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &=
-		~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	immr->im_ioport.iop_pcso  &=  ~(PC_ENET_CLSN | PC_ENET_RENA);
-}
-
-#if 0
-void restart (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-	immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
-		(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-}
-#endif
-#endif
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
deleted file mode 100644
index 664db65..0000000
--- a/cpu/mpc8xx/serial.c
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <command.h>
-#include <serial.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_8xx_CONS_NONE)	/* No Console at all */
-
-#if defined(CONFIG_8xx_CONS_SMC1)	/* Console on SMC1 */
-#define	SMC_INDEX	0
-#define PROFF_SMC	PROFF_SMC1
-#define CPM_CR_CH_SMC	CPM_CR_CH_SMC1
-
-#elif defined(CONFIG_8xx_CONS_SMC2)	/* Console on SMC2 */
-#define SMC_INDEX	1
-#define PROFF_SMC	PROFF_SMC2
-#define CPM_CR_CH_SMC	CPM_CR_CH_SMC2
-
-#endif /* CONFIG_8xx_CONS_SMCx */
-
-#if defined(CONFIG_8xx_CONS_SCC1)	/* Console on SCC1 */
-#define SCC_INDEX	0
-#define PROFF_SCC	PROFF_SCC1
-#define CPM_CR_CH_SCC	CPM_CR_CH_SCC1
-
-#elif defined(CONFIG_8xx_CONS_SCC2)	/* Console on SCC2 */
-#define SCC_INDEX	1
-#define PROFF_SCC	PROFF_SCC2
-#define CPM_CR_CH_SCC	CPM_CR_CH_SCC2
-
-#elif defined(CONFIG_8xx_CONS_SCC3)	/* Console on SCC3 */
-#define SCC_INDEX	2
-#define PROFF_SCC	PROFF_SCC3
-#define CPM_CR_CH_SCC	CPM_CR_CH_SCC3
-
-#elif defined(CONFIG_8xx_CONS_SCC4)	/* Console on SCC4 */
-#define SCC_INDEX	3
-#define PROFF_SCC	PROFF_SCC4
-#define CPM_CR_CH_SCC	CPM_CR_CH_SCC4
-
-#endif /* CONFIG_8xx_CONS_SCCx */
-
-#if !defined(CONFIG_SYS_SMC_RXBUFLEN)
-#define CONFIG_SYS_SMC_RXBUFLEN	1
-#define CONFIG_SYS_MAXIDLE	0
-#else
-#if !defined(CONFIG_SYS_MAXIDLE)
-#error "you must define CONFIG_SYS_MAXIDLE"
-#endif
-#endif
-
-typedef volatile struct serialbuffer {
-	cbd_t	rxbd;		/* Rx BD */
-	cbd_t	txbd;		/* Tx BD */
-	uint	rxindex;	/* index for next character to read */
-	volatile uchar	rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
-	volatile uchar	txbuf;	/* tx buffers */
-} serialbuffer_t;
-
-static void serial_setdivisor(volatile cpm8xx_t *cp)
-{
-	int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate;
-
-	if(divisor/16>0x1000) {
-		/* bad divisor, assume 50MHz clock and 9600 baud */
-		divisor=(50*1000*1000 + 8*9600)/16/9600;
-	}
-
-#ifdef CONFIG_SYS_BRGCLK_PRESCALE
-	divisor /= CONFIG_SYS_BRGCLK_PRESCALE;
-#endif
-
-	if(divisor<=0x1000) {
-		cp->cp_brgc1=((divisor-1)<<1) | CPM_BRG_EN;
-	} else {
-		cp->cp_brgc1=((divisor/16-1)<<1) | CPM_BRG_EN | CPM_BRG_DIV16;
-	}
-}
-
-#if (defined (CONFIG_8xx_CONS_SMC1) || defined (CONFIG_8xx_CONS_SMC2))
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-static void smc_setbrg (void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8xx_t *cp = &(im->im_cpm);
-
-	/* Set up the baud rate generator.
-	 * See 8xx_io/commproc.c for details.
-	 *
-	 * Wire BRG1 to SMCx
-	 */
-
-	cp->cp_simode = 0x00000000;
-
-	serial_setdivisor(cp);
-}
-
-static int smc_init (void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile smc_t *sp;
-	volatile smc_uart_t *up;
-	volatile cpm8xx_t *cp = &(im->im_cpm);
-#if (!defined(CONFIG_8xx_CONS_SMC1)) && (defined(CONFIG_MPC823) || defined(CONFIG_MPC850))
-	volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
-#endif
-	uint	dpaddr;
-	volatile serialbuffer_t *rtx;
-
-	/* initialize pointers to SMC */
-
-	sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]);
-	up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
-	up = (smc_uart_t *) &cp->cp_dpmem[up->smc_rpbase];
-#else
-	/* Disable relocation */
-	up->smc_rpbase = 0;
-#endif
-
-	/* Disable transmitter/receiver. */
-	sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
-	/* Enable SDMA. */
-	im->im_siu_conf.sc_sdcr = 1;
-
-	/* clear error conditions */
-#ifdef	CONFIG_SYS_SDSR
-	im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
-#else
-	im->im_sdma.sdma_sdsr = 0x83;
-#endif
-
-	/* clear SDMA interrupt mask */
-#ifdef	CONFIG_SYS_SDMR
-	im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
-#else
-	im->im_sdma.sdma_sdmr = 0x00;
-#endif
-
-#if defined(CONFIG_8xx_CONS_SMC1)
-	/* Use Port B for SMC1 instead of other functions. */
-	cp->cp_pbpar |=  0x000000c0;
-	cp->cp_pbdir &= ~0x000000c0;
-	cp->cp_pbodr &= ~0x000000c0;
-#else	/* CONFIG_8xx_CONS_SMC2 */
-# if defined(CONFIG_MPC823) || defined(CONFIG_MPC850)
-	/* Use Port A for SMC2 instead of other functions. */
-	ip->iop_papar |=  0x00c0;
-	ip->iop_padir &= ~0x00c0;
-	ip->iop_paodr &= ~0x00c0;
-# else	/* must be a 860 then */
-	/* Use Port B for SMC2 instead of other functions.
-	 */
-	cp->cp_pbpar |=  0x00000c00;
-	cp->cp_pbdir &= ~0x00000c00;
-	cp->cp_pbodr &= ~0x00000c00;
-# endif
-#endif
-
-#if defined(CONFIG_FADS) || defined(CONFIG_ADS)
-	/* Enable RS232 */
-#if defined(CONFIG_8xx_CONS_SMC1)
-	*((uint *) BCSR1) &= ~BCSR1_RS232EN_1;
-#else
-	*((uint *) BCSR1) &= ~BCSR1_RS232EN_2;
-#endif
-#endif	/* CONFIG_FADS */
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-	/* Enable Monitor Port Transceiver */
-	*((uchar *) BCSR0) |= BCSR0_ENMONXCVR ;
-#endif /* CONFIG_RPXLITE */
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-	/* allocate
-	 * size of struct serialbuffer with bd rx/tx, buffer rx/tx and rx index
-	 */
-	dpaddr = dpram_alloc_align((sizeof(serialbuffer_t)), 8);
-#else
-	dpaddr = CPM_SERIAL_BASE ;
-#endif
-
-	rtx = (serialbuffer_t *)&cp->cp_dpmem[dpaddr];
-	/* Allocate space for two buffer descriptors in the DP ram.
-	 * For now, this address seems OK, but it may have to
-	 * change with newer versions of the firmware.
-	 * damm: allocating space after the two buffers for rx/tx data
-	 */
-
-	rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf;
-	rtx->rxbd.cbd_sc      = 0;
-
-	rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf;
-	rtx->txbd.cbd_sc      = 0;
-
-	/* Set up the uart parameters in the parameter ram. */
-	up->smc_rbase = dpaddr;
-	up->smc_tbase = dpaddr+sizeof(cbd_t);
-	up->smc_rfcr = SMC_EB;
-	up->smc_tfcr = SMC_EB;
-#if defined (CONFIG_SYS_SMC_UCODE_PATCH)
-	up->smc_rbptr = up->smc_rbase;
-	up->smc_tbptr = up->smc_tbase;
-	up->smc_rstate = 0;
-	up->smc_tstate = 0;
-#endif
-
-#if defined(CONFIG_MBX)
-	board_serial_init();
-#endif	/* CONFIG_MBX */
-
-	/* Set UART mode, 8 bit, no parity, one stop.
-	 * Enable receive and transmit.
-	 */
-	sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-	/* Mask all interrupts and remove anything pending.
-	*/
-	sp->smc_smcm = 0;
-	sp->smc_smce = 0xff;
-
-#ifdef CONFIG_SYS_SPC1920_SMC1_CLK4
-	/* clock source is PLD */
-
-	/* set freq to 19200 Baud */
-	*((volatile uchar *) CONFIG_SYS_SPC1920_PLD_BASE+6) = 0x3;
-	/* configure clk4 as input */
-	im->im_ioport.iop_pdpar |= 0x800;
-	im->im_ioport.iop_pddir &= ~0x800;
-
-	cp->cp_simode = ((cp->cp_simode & ~0xf000) | 0x7000);
-#else
-	/* Set up the baud rate generator */
-	smc_setbrg ();
-#endif
-
-	/* Make the first buffer the only buffer. */
-	rtx->txbd.cbd_sc |= BD_SC_WRAP;
-	rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
-	/* single/multi character receive. */
-	up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN;
-	up->smc_maxidl = CONFIG_SYS_MAXIDLE;
-	rtx->rxindex = 0;
-
-	/* Initialize Tx/Rx parameters.	*/
-	while (cp->cp_cpcr & CPM_CR_FLG)  /* wait if cp is busy */
-	  ;
-
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
-	while (cp->cp_cpcr & CPM_CR_FLG)  /* wait if cp is busy */
-	  ;
-
-	/* Enable transmitter/receiver.	*/
-	sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
-	return (0);
-}
-
-static void
-smc_putc(const char c)
-{
-	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
-	volatile serialbuffer_t	*rtx;
-
-#ifdef CONFIG_MODEM_SUPPORT
-	if (gd->be_quiet)
-		return;
-#endif
-
-	if (c == '\n')
-		smc_putc ('\r');
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
-	up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
-
-	rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
-	/* Wait for last character to go. */
-	rtx->txbuf = c;
-	rtx->txbd.cbd_datlen = 1;
-	rtx->txbd.cbd_sc |= BD_SC_READY;
-	__asm__("eieio");
-
-	while (rtx->txbd.cbd_sc & BD_SC_READY) {
-		WATCHDOG_RESET ();
-		__asm__("eieio");
-	}
-}
-
-static void
-smc_puts (const char *s)
-{
-	while (*s) {
-		smc_putc (*s++);
-	}
-}
-
-static int
-smc_getc(void)
-{
-	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
-	volatile serialbuffer_t	*rtx;
-	unsigned char  c;
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
-	up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
-	rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
-	/* Wait for character to show up. */
-	while (rtx->rxbd.cbd_sc & BD_SC_EMPTY)
-		WATCHDOG_RESET ();
-
-	/* the characters are read one by one,
-	 * use the rxindex to know the next char to deliver
-	 */
-	c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr+rtx->rxindex);
-	rtx->rxindex++;
-
-	/* check if all char are readout, then make prepare for next receive */
-	if (rtx->rxindex >= rtx->rxbd.cbd_datlen) {
-		rtx->rxindex = 0;
-		rtx->rxbd.cbd_sc |= BD_SC_EMPTY;
-	}
-	return(c);
-}
-
-static int
-smc_tstc(void)
-{
-	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
-	volatile serialbuffer_t	*rtx;
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
-	up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
-
-	rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
-	return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY);
-}
-
-struct serial_device serial_smc_device =
-{
-	"serial_smc",
-	"SMC",
-	smc_init,
-	smc_setbrg,
-	smc_getc,
-	smc_tstc,
-	smc_putc,
-	smc_puts,
-};
-
-#endif /* CONFIG_8xx_CONS_SMC1 || CONFIG_8xx_CONS_SMC2 */
-
-#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
-    defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
-
-static void
-scc_setbrg (void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8xx_t *cp = &(im->im_cpm);
-
-	/* Set up the baud rate generator.
-	 * See 8xx_io/commproc.c for details.
-	 *
-	 * Wire BRG1 to SCCx
-	 */
-
-	cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
-
-	serial_setdivisor(cp);
-}
-
-static int scc_init (void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile scc_t *sp;
-	volatile scc_uart_t *up;
-	volatile cbd_t *tbdf, *rbdf;
-	volatile cpm8xx_t *cp = &(im->im_cpm);
-	uint	 dpaddr;
-#if (SCC_INDEX != 2) || !defined(CONFIG_MPC850)
-	volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
-#endif
-
-	/* initialize pointers to SCC */
-
-	sp = (scc_t *) &(cp->cp_scc[SCC_INDEX]);
-	up = (scc_uart_t *) &cp->cp_dparam[PROFF_SCC];
-
-#if defined(CONFIG_LWMON) && defined(CONFIG_8xx_CONS_SCC2)
-    {	/* Disable Ethernet, enable Serial */
-	uchar c;
-
-	c = pic_read  (0x61);
-	c &= ~0x40;	/* enable COM3 */
-	c |=  0x80;	/* disable Ethernet */
-	pic_write (0x61, c);
-
-	/* enable RTS2 */
-	cp->cp_pbpar |=  0x2000;
-	cp->cp_pbdat |=  0x2000;
-	cp->cp_pbdir |=  0x2000;
-    }
-#endif	/* CONFIG_LWMON */
-
-	/* Disable transmitter/receiver. */
-	sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-#if (SCC_INDEX == 2) && defined(CONFIG_MPC850)
-	/*
-	 * The MPC850 has SCC3 on Port B
-	 */
-	cp->cp_pbpar |=  0x06;
-	cp->cp_pbdir &= ~0x06;
-	cp->cp_pbodr &= ~0x06;
-
-#elif (SCC_INDEX < 2) || !defined(CONFIG_IP860)
-	/*
-	 * Standard configuration for SCC's is on Part A
-	 */
-	ip->iop_papar |=  ((3 << (2 * SCC_INDEX)));
-	ip->iop_padir &= ~((3 << (2 * SCC_INDEX)));
-	ip->iop_paodr &= ~((3 << (2 * SCC_INDEX)));
-#else
-	/*
-	 * The IP860 has SCC3 and SCC4 on Port D
-	 */
-	ip->iop_pdpar |=  ((3 << (2 * SCC_INDEX)));
-#endif
-
-	/* Allocate space for two buffer descriptors in the DP ram. */
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-	dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
-#else
-	dpaddr = CPM_SERIAL2_BASE ;
-#endif
-
-	/* Enable SDMA.	*/
-	im->im_siu_conf.sc_sdcr = 0x0001;
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-
-	rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
-	rbdf->cbd_bufaddr = (uint) (rbdf+2);
-	rbdf->cbd_sc = 0;
-	tbdf = rbdf + 1;
-	tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
-	tbdf->cbd_sc = 0;
-
-	/* Set up the baud rate generator. */
-	scc_setbrg ();
-
-	/* Set up the uart parameters in the parameter ram. */
-	up->scc_genscc.scc_rbase = dpaddr;
-	up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
-
-	/* Initialize Tx/Rx parameters. */
-	while (cp->cp_cpcr & CPM_CR_FLG)  /* wait if cp is busy */
-		;
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
-	while (cp->cp_cpcr & CPM_CR_FLG)  /* wait if cp is busy */
-		;
-
-	up->scc_genscc.scc_rfcr  = SCC_EB | 0x05;
-	up->scc_genscc.scc_tfcr  = SCC_EB | 0x05;
-
-	up->scc_genscc.scc_mrblr = 1;	/* Single character receive */
-	up->scc_maxidl = 0;		/* disable max idle */
-	up->scc_brkcr  = 1;		/* send one break character on stop TX */
-	up->scc_parec  = 0;
-	up->scc_frmec  = 0;
-	up->scc_nosec  = 0;
-	up->scc_brkec  = 0;
-	up->scc_uaddr1 = 0;
-	up->scc_uaddr2 = 0;
-	up->scc_toseq  = 0;
-	up->scc_char1  = 0x8000;
-	up->scc_char2  = 0x8000;
-	up->scc_char3  = 0x8000;
-	up->scc_char4  = 0x8000;
-	up->scc_char5  = 0x8000;
-	up->scc_char6  = 0x8000;
-	up->scc_char7  = 0x8000;
-	up->scc_char8  = 0x8000;
-	up->scc_rccm   = 0xc0ff;
-
-	/* Set low latency / small fifo. */
-	sp->scc_gsmrh = SCC_GSMRH_RFW;
-
-	/* Set SCC(x) clock mode to 16x
-	 * See 8xx_io/commproc.c for details.
-	 *
-	 * Wire BRG1 to SCCn
-	 */
-
-	/* Set UART mode, clock divider 16 on Tx and Rx */
-	sp->scc_gsmrl &= ~0xF;
-	sp->scc_gsmrl |=
-		(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
-	sp->scc_psmr  = 0;
-	sp->scc_psmr  |= SCU_PSMR_CL;
-
-	/* Mask all interrupts and remove anything pending. */
-	sp->scc_sccm = 0;
-	sp->scc_scce = 0xffff;
-	sp->scc_dsr  = 0x7e7e;
-	sp->scc_psmr = 0x3000;
-
-	/* Make the first buffer the only buffer. */
-	tbdf->cbd_sc |= BD_SC_WRAP;
-	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
-	/* Enable transmitter/receiver.	*/
-	sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	return (0);
-}
-
-static void
-scc_putc(const char c)
-{
-	volatile cbd_t		*tbdf;
-	volatile char		*buf;
-	volatile scc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
-
-#ifdef CONFIG_MODEM_SUPPORT
-	if (gd->be_quiet)
-		return;
-#endif
-
-	if (c == '\n')
-		scc_putc ('\r');
-
-	up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
-	tbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_tbase];
-
-	/* Wait for last character to go. */
-
-	buf = (char *)tbdf->cbd_bufaddr;
-
-	*buf = c;
-	tbdf->cbd_datlen = 1;
-	tbdf->cbd_sc |= BD_SC_READY;
-	__asm__("eieio");
-
-	while (tbdf->cbd_sc & BD_SC_READY) {
-		__asm__("eieio");
-		WATCHDOG_RESET ();
-	}
-}
-
-static void
-scc_puts (const char *s)
-{
-	while (*s) {
-		scc_putc (*s++);
-	}
-}
-
-static int
-scc_getc(void)
-{
-	volatile cbd_t		*rbdf;
-	volatile unsigned char	*buf;
-	volatile scc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
-	unsigned char		c;
-
-	up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
-	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
-
-	/* Wait for character to show up. */
-	buf = (unsigned char *)rbdf->cbd_bufaddr;
-
-	while (rbdf->cbd_sc & BD_SC_EMPTY)
-		WATCHDOG_RESET ();
-
-	c = *buf;
-	rbdf->cbd_sc |= BD_SC_EMPTY;
-
-	return(c);
-}
-
-static int
-scc_tstc(void)
-{
-	volatile cbd_t		*rbdf;
-	volatile scc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
-
-	up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
-	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
-
-	return(!(rbdf->cbd_sc & BD_SC_EMPTY));
-}
-
-struct serial_device serial_scc_device =
-{
-	"serial_scc",
-	"SCC",
-	scc_init,
-	scc_setbrg,
-	scc_getc,
-	scc_tstc,
-	scc_putc,
-	scc_puts,
-};
-
-#endif	/* CONFIG_8xx_CONS_SCCx */
-
-#ifdef CONFIG_MODEM_SUPPORT
-void disable_putc(void)
-{
-	gd->be_quiet = 1;
-}
-
-void enable_putc(void)
-{
-	gd->be_quiet = 0;
-}
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-
-void
-kgdb_serial_init(void)
-{
-	int i = -1;
-
-	if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
-	{
-#if defined(CONFIG_8xx_CONS_SMC1)
-		i = 1;
-#elif defined(CONFIG_8xx_CONS_SMC2)
-		i = 2;
-#endif
-	}
-	else if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
-	{
-#if defined(CONFIG_8xx_CONS_SCC1)
-		i = 1;
-#elif defined(CONFIG_8xx_CONS_SCC2)
-		i = 2;
-#elif defined(CONFIG_8xx_CONS_SCC3)
-		i = 3;
-#elif defined(CONFIG_8xx_CONS_SCC4)
-		i = 4;
-#endif
-	}
-
-	if (i >= 0)
-	{
-		serial_printf("[on %s%d] ", default_serial_console()->ctlr, i);
-	}
-}
-
-void
-putDebugChar (int c)
-{
-	serial_putc (c);
-}
-
-void
-putDebugStr (const char *str)
-{
-	serial_puts (str);
-}
-
-int
-getDebugChar (void)
-{
-	return serial_getc();
-}
-
-void
-kgdb_interruptible (int yes)
-{
-	return;
-}
-#endif
-
-#endif	/* CONFIG_8xx_CONS_NONE */
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
deleted file mode 100644
index f309f29..0000000
--- a/cpu/mpc8xx/speed.c
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CONFIG_SYS_MEASURE_CPUCLK) || defined(DEBUG)
-
-#define PITC_SHIFT 16
-#define PITR_SHIFT 16
-/* pitc values to time for 58/8192 seconds (about 70.8 milliseconds) */
-#define SPEED_PIT_COUNTS 58
-#define SPEED_PITC	 ((SPEED_PIT_COUNTS - 1) << PITC_SHIFT)
-#define SPEED_PITC_INIT	 ((SPEED_PIT_COUNTS + 1) << PITC_SHIFT)
-
-/* Access functions for the Machine State Register */
-static __inline__ unsigned long get_msr(void)
-{
-	unsigned long msr;
-
-	asm volatile("mfmsr %0" : "=r" (msr) :);
-	return msr;
-}
-
-static __inline__ void set_msr(unsigned long msr)
-{
-	asm volatile("mtmsr %0" : : "r" (msr));
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Measure CPU clock speed (core clock GCLK1, GCLK2),
- * also determine bus clock speed (checking bus divider factor)
- *
- * (Approx. GCLK frequency in Hz)
- *
- * Initializes timer 2 and PIT, but disables them before return.
- * [Use timer 2, because MPC823 CPUs mask 0.x do not have timers 3 and 4]
- *
- * When measuring the CPU clock against the PIT, we count cpu clocks
- * for 58/8192 seconds with a prescale divide by 177 for the cpu clock.
- * These strange values for the timing interval and prescaling are used
- * because the formula for the CPU clock is:
- *
- *    CPU clock = count * (177 * (8192 / 58))
- *
- *		= count * 24999.7241
- *
- *    which is very close to
- *
- *		= count * 25000
- *
- * Since the count gives the CPU clock divided by 25000, we can get
- * the CPU clock rounded to the nearest 0.1 MHz by
- *
- *    CPU clock = ((count + 2) / 4) * 100000;
- *
- * The rounding is important since the measurement is sometimes going
- * to be high or low by 0.025 MHz, depending on exactly how the clocks
- * and counters interact. By rounding we get the exact answer for any
- * CPU clock that is an even multiple of 0.1 MHz.
- */
-
-unsigned long measure_gclk(void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer;
-	ulong timer2_val;
-	ulong msr_val;
-
-#ifdef CONFIG_SYS_8XX_XIN
-	/* dont use OSCM, only use EXTCLK/512 */
-	immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
-#else
-	immr->im_clkrst.car_sccr &= ~(SCCR_RTSEL | SCCR_RTDIV);
-#endif
-
-	/* Reset + Stop Timer 2, no cascading
-	 */
-	timerp->cpmt_tgcr &= ~(TGCR_CAS2 | TGCR_RST2);
-
-	/* Keep stopped, halt in debug mode
-	 */
-	timerp->cpmt_tgcr |= (TGCR_FRZ2 | TGCR_STP2);
-
-	/* Timer 2 setup:
-	 * Output ref. interrupt disable, int. clock
-	 * Prescale by 177. Note that prescaler divides by value + 1
-	 * so we must subtract 1 here.
-	 */
-	timerp->cpmt_tmr2 = ((177 - 1) << TMR_PS_SHIFT) | TMR_ICLK_IN_GEN;
-
-	timerp->cpmt_tcn2 = 0;		/* reset state		*/
-	timerp->cpmt_tgcr |= TGCR_RST2;	/* enable timer 2	*/
-
-	/*
-	 * PIT setup:
-	 *
-	 * We want to time for SPEED_PITC_COUNTS counts (of 8192 Hz),
-	 * so the count value would be SPEED_PITC_COUNTS - 1.
-	 * But there would be an uncertainty in the start time of 1/4
-	 * count since when we enable the PIT the count is not
-	 * synchronized to the 32768 Hz oscillator. The trick here is
-	 * to start the count higher and wait until the PIT count
-	 * changes to the required value before starting timer 2.
-	 *
-	 * One count high should be enough, but occasionally the start
-	 * is off by 1 or 2 counts of 32768 Hz. With the start value
-	 * set two counts high it seems very reliable.
-	 */
-
-	immr->im_sitk.sitk_pitck = KAPWR_KEY;	/* PIT initialization */
-	immr->im_sit.sit_pitc = SPEED_PITC_INIT;
-
-	immr->im_sitk.sitk_piscrk = KAPWR_KEY;
-	immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
-	/*
-	 * Start measurement - disable interrupts, just in case
-	 */
-	msr_val = get_msr ();
-	set_msr (msr_val & ~MSR_EE);
-
-	immr->im_sit.sit_piscr |= PISCR_PTE;
-
-	/* spin until get exact count when we want to start */
-	while (immr->im_sit.sit_pitr > SPEED_PITC);
-
-	timerp->cpmt_tgcr &= ~TGCR_STP2;	/* Start Timer 2	*/
-	while ((immr->im_sit.sit_piscr & PISCR_PS) == 0);
-	timerp->cpmt_tgcr |= TGCR_STP2;		/* Stop  Timer 2	*/
-
-	/* re-enable external interrupts if they were on */
-	set_msr (msr_val);
-
-	/* Disable timer and PIT
-	 */
-	timer2_val = timerp->cpmt_tcn2;		/* save before reset timer */
-
-	timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
-	immr->im_sit.sit_piscr &= ~PISCR_PTE;
-
-#if defined(CONFIG_SYS_8XX_XIN)
-	/* not using OSCM, using XIN, so scale appropriately */
-	return (((timer2_val + 2) / 4) * (CONFIG_SYS_8XX_XIN/512))/8192 * 100000L;
-#else
-	return ((timer2_val + 2) / 4) * 100000L;	/* convert to Hz	*/
-#endif
-}
-
-#endif
-
-void get_brgclk(uint sccr)
-{
-	uint divider = 0;
-
-	switch((sccr&SCCR_DFBRG11)>>11){
-		case 0:
-			divider = 1;
-			break;
-		case 1:
-			divider = 4;
-			break;
-		case 2:
-			divider = 16;
-			break;
-		case 3:
-			divider = 64;
-			break;
-	}
-	gd->brg_clk = gd->cpu_clk/divider;
-}
-
-#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
-
-/*
- * get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ
- * or (if it is not defined) measure_gclk() (which uses the ref clock)
- * from above.
- */
-int get_clocks (void)
-{
-	uint immr = get_immr (0);	/* Return full IMMR contents */
-	volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
-	uint sccr = immap->im_clkrst.car_sccr;
-	/*
-	 * If for some reason measuring the gclk frequency won't
-	 * work, we return the hardwired value.
-	 * (For example, the cogent CMA286-60 CPU module has no
-	 * separate oscillator for PITRTCLK)
-	 */
-#if defined(CONFIG_8xx_GCLK_FREQ)
-	gd->cpu_clk = CONFIG_8xx_GCLK_FREQ;
-#elif defined(CONFIG_8xx_OSCLK)
-#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
-	uint pll = immap->im_clkrst.car_plprcr;
-	uint clk;
-
-	if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
-		clk = ((CONFIG_8xx_OSCLK / (PLPRCR_val(PDF)+1)) *
-		       (PLPRCR_val(MFI) + PLPRCR_val(MFN) / (PLPRCR_val(MFD)+1))) /
-			(1<<PLPRCR_val(S));
-	} else {
-		clk = CONFIG_8xx_OSCLK * (PLPRCR_val(MF)+1);
-	}
-	if (pll & PLPRCR_CSRC) {	/* Low frequency division factor is used  */
-		gd->cpu_clk = clk / (2 << ((sccr >> 8) & 7));
-	} else {			/* High frequency division factor is used */
-		gd->cpu_clk = clk / (1 << ((sccr >> 5) & 7));
-	}
-#else
-	gd->cpu_clk = measure_gclk();
-#endif /* CONFIG_8xx_GCLK_FREQ */
-
-	if ((sccr & SCCR_EBDF11) == 0) {
-		/* No Bus Divider active */
-		gd->bus_clk = gd->cpu_clk;
-	} else {
-		/* The MPC8xx has only one BDF: half clock speed */
-		gd->bus_clk = gd->cpu_clk / 2;
-	}
-
-	get_brgclk(sccr);
-
-	return (0);
-}
-
-#else /* CONFIG_8xx_CPUCLK_DEFAULT defined, use dynamic clock setting */
-
-static long init_pll_866 (long clk);
-
-/* This function sets up PLL (init_pll_866() is called) and
- * fills gd->cpu_clk and gd->bus_clk according to the environment
- * variable 'cpuclk' or to CONFIG_8xx_CPUCLK_DEFAULT (if 'cpuclk'
- * contains invalid value).
- * This functions requires an MPC866 or newer series CPU.
- */
-int get_clocks_866 (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	char		  tmp[64];
-	long		  cpuclk = 0;
-	long		  sccr_reg;
-
-	if (getenv_r ("cpuclk", tmp, sizeof (tmp)) > 0)
-		cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
-
-	if ((CONFIG_SYS_8xx_CPUCLK_MIN > cpuclk) || (CONFIG_SYS_8xx_CPUCLK_MAX < cpuclk))
-		cpuclk = CONFIG_8xx_CPUCLK_DEFAULT;
-
-	gd->cpu_clk = init_pll_866 (cpuclk);
-#if defined(CONFIG_SYS_MEASURE_CPUCLK)
-	gd->cpu_clk = measure_gclk ();
-#endif
-
-	get_brgclk(immr->im_clkrst.car_sccr);
-
-	/* if cpu clock <= 66 MHz then set bus division factor to 1,
-	 * otherwise set it to 2
-	 */
-	sccr_reg = immr->im_clkrst.car_sccr;
-	sccr_reg &= ~SCCR_EBDF11;
-
-	if (gd->cpu_clk <= 66000000) {
-		sccr_reg |= SCCR_EBDF00;	/* bus division factor = 1 */
-		gd->bus_clk = gd->cpu_clk;
-	} else {
-		sccr_reg |= SCCR_EBDF01;	/* bus division factor = 2 */
-		gd->bus_clk = gd->cpu_clk / 2;
-	}
-	immr->im_clkrst.car_sccr = sccr_reg;
-
-	return (0);
-}
-
-/* Adjust sdram refresh rate to actual CPU clock.
- */
-int sdram_adjust_866 (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	long		  mamr;
-
-	mamr = immr->im_memctl.memc_mamr;
-	mamr &= ~MAMR_PTA_MSK;
-	mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
-	immr->im_memctl.memc_mamr = mamr;
-
-	return (0);
-}
-
-/* Configure PLL for MPC866/859/885 CPU series
- * PLL multiplication factor is set to the value nearest to the desired clk,
- * assuming a oscclk of 10 MHz.
- */
-static long init_pll_866 (long clk)
-{
-	extern void plprcr_write_866 (long);
-
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	long		  n, plprcr;
-	char		  mfi, mfn, mfd, s, pdf;
-	long		  step_mfi, step_mfn;
-
-	if (clk < 20000000) {
-		clk *= 2;
-		pdf = 1;
-	} else {
-		pdf = 0;
-	}
-
-	if (clk < 40000000) {
-		s = 2;
-		step_mfi = CONFIG_8xx_OSCLK / 4;
-		mfd = 7;
-		step_mfn = CONFIG_8xx_OSCLK / 30;
-	} else if (clk < 80000000) {
-		s = 1;
-		step_mfi = CONFIG_8xx_OSCLK / 2;
-		mfd = 14;
-		step_mfn = CONFIG_8xx_OSCLK / 30;
-	} else {
-		s = 0;
-		step_mfi = CONFIG_8xx_OSCLK;
-		mfd = 29;
-		step_mfn = CONFIG_8xx_OSCLK / 30;
-	}
-
-	/* Calculate integer part of multiplication factor
-	 */
-	n = clk / step_mfi;
-	mfi = (char)n;
-
-	/* Calculate numerator of fractional part of multiplication factor
-	 */
-	n = clk - (n * step_mfi);
-	mfn = (char)(n / step_mfn);
-
-	/* Calculate effective clk
-	 */
-	n = ((mfi * step_mfi) + (mfn * step_mfn)) / (pdf + 1);
-
-	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-
-	plprcr = (immr->im_clkrst.car_plprcr & ~(PLPRCR_MFN_MSK
-			| PLPRCR_MFD_MSK | PLPRCR_S_MSK
-			| PLPRCR_MFI_MSK | PLPRCR_DBRMO
-			| PLPRCR_PDF_MSK))
-			| (mfn << PLPRCR_MFN_SHIFT)
-			| (mfd << PLPRCR_MFD_SHIFT)
-			| (s << PLPRCR_S_SHIFT)
-			| (mfi << PLPRCR_MFI_SHIFT)
-			| (pdf << PLPRCR_PDF_SHIFT);
-
-	if( (mfn > 0) && ((mfd / mfn) > 10) )
-		plprcr |= PLPRCR_DBRMO;
-
-	plprcr_write_866 (plprcr);		/* set value using SIU4/9 workaround */
-	immr->im_clkrstk.cark_plprcrk = 0x00000000;
-
-	return (n);
-}
-
-#endif /* CONFIG_8xx_CPUCLK_DEFAULT */
-
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
-    && !defined(CONFIG_TQM885D)
-/*
- * Adjust sdram refresh rate to actual CPU clock
- * and set timebase source according to actual CPU clock
- */
-int adjust_sdram_tbs_8xx (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	long		  mamr;
-	long              sccr;
-
-	mamr = immr->im_memctl.memc_mamr;
-	mamr &= ~MAMR_PTA_MSK;
-	mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
-	immr->im_memctl.memc_mamr = mamr;
-
-	if (gd->cpu_clk < 67000000) {
-		sccr = immr->im_clkrst.car_sccr;
-		sccr |= SCCR_TBS;
-		immr->im_clkrst.car_sccr = sccr;
-	}
-
-	return (0);
-}
-#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
-
-/* ------------------------------------------------------------------------- */
diff --git a/cpu/mpc8xx/spi.c b/cpu/mpc8xx/spi.c
deleted file mode 100644
index b2ac23e..0000000
--- a/cpu/mpc8xx/spi.c
+++ /dev/null
@@ -1,560 +0,0 @@
-/*
- * Copyright (c) 2001 Navin Boppuri / Prashant Patel
- *	<nboppuri@trinetcommunication.com>,
- *	<pmpatel@trinetcommunication.com>
- * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
- * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * MPC8xx CPM SPI interface.
- *
- * Parts of this code are probably not portable and/or specific to
- * the board which I used for the tests. Please send fixes/complaints
- * to wd@denx.de
- *
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-#include <linux/ctype.h>
-#include <malloc.h>
-#include <post.h>
-#include <serial.h>
-
-#if (defined(CONFIG_SPI)) || (CONFIG_POST & CONFIG_SYS_POST_SPI)
-
-/* Warning:
- * You cannot enable DEBUG for early system initalization, i. e. when
- * this driver is used to read environment parameters like "baudrate"
- * from EEPROM which are used to initialize the serial port which is
- * needed to print the debug messages...
- */
-#undef	DEBUG
-
-#define SPI_EEPROM_WREN		0x06
-#define SPI_EEPROM_RDSR		0x05
-#define SPI_EEPROM_READ		0x03
-#define SPI_EEPROM_WRITE	0x02
-
-/* ---------------------------------------------------------------
- * Offset for initial SPI buffers in DPRAM:
- * We need a 520 byte scratch DPRAM area to use at an early stage.
- * It is used between the two initialization calls (spi_init_f()
- * and spi_init_r()).
- * The value 0xb00 makes it far enough from the start of the data
- * area (as well as from the stack pointer).
- * --------------------------------------------------------------- */
-#ifndef	CONFIG_SYS_SPI_INIT_OFFSET
-#define	CONFIG_SYS_SPI_INIT_OFFSET	0xB00
-#endif
-
-#ifdef	DEBUG
-
-#define	DPRINT(a)	printf a;
-/* -----------------------------------------------
- * Helper functions to peek into tx and rx buffers
- * ----------------------------------------------- */
-static const char * const hex_digit = "0123456789ABCDEF";
-
-static char quickhex (int i)
-{
-	return hex_digit[i];
-}
-
-static void memdump (void *pv, int num)
-{
-	int i;
-	unsigned char *pc = (unsigned char *) pv;
-
-	for (i = 0; i < num; i++)
-		printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
-	printf ("\t");
-	for (i = 0; i < num; i++)
-		printf ("%c", isprint (pc[i]) ? pc[i] : '.');
-	printf ("\n");
-}
-#else	/* !DEBUG */
-
-#define	DPRINT(a)
-
-#endif	/* DEBUG */
-
-/* -------------------
- * Function prototypes
- * ------------------- */
-void spi_init (void);
-
-ssize_t spi_read (uchar *, int, uchar *, int);
-ssize_t spi_write (uchar *, int, uchar *, int);
-ssize_t spi_xfer (size_t);
-
-/* -------------------
- * Variables
- * ------------------- */
-
-#define MAX_BUFFER	0x104
-
-/* ----------------------------------------------------------------------
- * Initially we place the RX and TX buffers at a fixed location in DPRAM!
- * ---------------------------------------------------------------------- */
-static uchar *rxbuf =
-  (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
-			[CONFIG_SYS_SPI_INIT_OFFSET];
-static uchar *txbuf =
-  (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
-			[CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
-
-/* **************************************************************************
- *
- *  Function:    spi_init_f
- *
- *  Description: Init SPI-Controller (ROM part)
- *
- *  return:      ---
- *
- * *********************************************************************** */
-void spi_init_f (void)
-{
-	unsigned int dpaddr;
-
-	volatile spi_t *spi;
-	volatile immap_t *immr;
-	volatile cpic8xx_t *cpi;
-	volatile cpm8xx_t *cp;
-	volatile iop8xx_t *iop;
-	volatile cbd_t *tbdf, *rbdf;
-
-	immr = (immap_t *)  CONFIG_SYS_IMMR;
-	cpi  = (cpic8xx_t *)&immr->im_cpic;
-	iop  = (iop8xx_t *) &immr->im_ioport;
-	cp   = (cpm8xx_t *) &immr->im_cpm;
-
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
-	spi  = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
-#else
-	spi  = (spi_t *)&cp->cp_dparam[PROFF_SPI];
-	/* Disable relocation */
-	spi->spi_rpbase = 0;
-#endif
-
-/* 1 */
-	/* ------------------------------------------------
-	 * Initialize Port B SPI pins -> page 34-8 MPC860UM
-	 * (we are only in Master Mode !)
-	 * ------------------------------------------------ */
-
-	/* --------------------------------------------
-	 * GPIO or per. Function
-	 * PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO)
-	 * PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI)
-	 * PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK)
-	 * PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM)
-	 * -------------------------------------------- */
-	cp->cp_pbpar |=  0x0000000E;	/* set  bits	*/
-	cp->cp_pbpar &= ~0x00000001;	/* reset bit	*/
-
-	/* ----------------------------------------------
-	 * In/Out or per. Function 0/1
-	 * PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO
-	 * PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI
-	 * PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK
-	 * PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM
-	 * ---------------------------------------------- */
-	cp->cp_pbdir |= 0x0000000F;
-
-	/* ----------------------------------------------
-	 * open drain or active output
-	 * PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO
-	 * PBODR[29] = 0 [0x00000004] -> active output SPIMOSI
-	 * PBODR[30] = 0 [0x00000002] -> active output: SPICLK
-	 * PBODR[31] = 0 [0x00000001] -> active output: GPIO OUT: CS for PCUE/CCM
-	 * ---------------------------------------------- */
-
-	cp->cp_pbodr |=  0x00000008;
-	cp->cp_pbodr &= ~0x00000007;
-
-	/* Initialize the parameter ram.
-	 * We need to make sure many things are initialized to zero
-	 */
-	spi->spi_rstate	= 0;
-	spi->spi_rdp	= 0;
-	spi->spi_rbptr	= 0;
-	spi->spi_rbc	= 0;
-	spi->spi_rxtmp	= 0;
-	spi->spi_tstate	= 0;
-	spi->spi_tdp	= 0;
-	spi->spi_tbptr	= 0;
-	spi->spi_tbc	= 0;
-	spi->spi_txtmp	= 0;
-
-	/* Allocate space for one transmit and one receive buffer
-	 * descriptor in the DP ram
-	 */
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-	dpaddr = dpram_alloc_align (sizeof(cbd_t)*2, 8);
-#else
-	dpaddr = CPM_SPI_BASE;
-#endif
-
-/* 3 */
-	/* Set up the SPI parameters in the parameter ram */
-	spi->spi_rbase = dpaddr;
-	spi->spi_tbase = dpaddr + sizeof (cbd_t);
-
-	/***********IMPORTANT******************/
-
-	/*
-	 * Setting transmit and receive buffer descriptor pointers
-	 * initially to rbase and tbase. Only the microcode patches
-	 * documentation talks about initializing this pointer. This
-	 * is missing from the sample I2C driver. If you dont
-	 * initialize these pointers, the kernel hangs.
-	 */
-	spi->spi_rbptr = spi->spi_rbase;
-	spi->spi_tbptr = spi->spi_tbase;
-
-/* 4 */
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
-	/*
-	 *  Initialize required parameters if using microcode patch.
-	 */
-	spi->spi_rstate = 0;
-	spi->spi_tstate = 0;
-#else
-	/* Init SPI Tx + Rx Parameters */
-	while (cp->cp_cpcr & CPM_CR_FLG)
-		;
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG)
-		;
-#endif	/* CONFIG_SYS_SPI_UCODE_PATCH */
-
-/* 5 */
-	/* Set SDMA configuration register */
-	immr->im_siu_conf.sc_sdcr = 0x0001;
-
-/* 6 */
-	/* Set to big endian. */
-	spi->spi_tfcr = SMC_EB;
-	spi->spi_rfcr = SMC_EB;
-
-/* 7 */
-	/* Set maximum receive size. */
-	spi->spi_mrblr = MAX_BUFFER;
-
-/* 8 + 9 */
-	/* tx and rx buffer descriptors */
-	tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
-	rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
-
-	tbdf->cbd_sc &= ~BD_SC_READY;
-	rbdf->cbd_sc &= ~BD_SC_EMPTY;
-
-	/* Set the bd's rx and tx buffer address pointers */
-	rbdf->cbd_bufaddr = (ulong) rxbuf;
-	tbdf->cbd_bufaddr = (ulong) txbuf;
-
-/* 10 + 11 */
-	cp->cp_spim = 0;			/* Mask  all SPI events */
-	cp->cp_spie = SPI_EMASK;		/* Clear all SPI events	*/
-
-	return;
-}
-
-/* **************************************************************************
- *
- *  Function:    spi_init_r
- *
- *  Description: Init SPI-Controller (RAM part) -
- *		 The malloc engine is ready and we can move our buffers to
- *		 normal RAM
- *
- *  return:      ---
- *
- * *********************************************************************** */
-void spi_init_r (void)
-{
-	volatile cpm8xx_t *cp;
-	volatile spi_t *spi;
-	volatile immap_t *immr;
-	volatile cbd_t *tbdf, *rbdf;
-
-	immr = (immap_t *)  CONFIG_SYS_IMMR;
-	cp   = (cpm8xx_t *) &immr->im_cpm;
-
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
-	spi  = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
-#else
-	spi  = (spi_t *)&cp->cp_dparam[PROFF_SPI];
-	/* Disable relocation */
-	spi->spi_rpbase = 0;
-#endif
-
-	/* tx and rx buffer descriptors */
-	tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
-	rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
-
-	/* Allocate memory for RX and TX buffers */
-	rxbuf = (uchar *) malloc (MAX_BUFFER);
-	txbuf = (uchar *) malloc (MAX_BUFFER);
-
-	rbdf->cbd_bufaddr = (ulong) rxbuf;
-	tbdf->cbd_bufaddr = (ulong) txbuf;
-
-	return;
-}
-
-/****************************************************************************
- *  Function:    spi_write
- **************************************************************************** */
-ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
-{
-	int i;
-
-	memset(rxbuf, 0, MAX_BUFFER);
-	memset(txbuf, 0, MAX_BUFFER);
-	*txbuf = SPI_EEPROM_WREN;		/* write enable		*/
-	spi_xfer(1);
-	memcpy(txbuf, addr, alen);
-	*txbuf = SPI_EEPROM_WRITE;		/* WRITE memory array	*/
-	memcpy(alen + txbuf, buffer, len);
-	spi_xfer(alen + len);
-						/* ignore received data	*/
-	for (i = 0; i < 1000; i++) {
-		*txbuf = SPI_EEPROM_RDSR;	/* read status		*/
-		txbuf[1] = 0;
-		spi_xfer(2);
-		if (!(rxbuf[1] & 1)) {
-			break;
-		}
-		udelay(1000);
-	}
-	if (i >= 1000) {
-		printf ("*** spi_write: Time out while writing!\n");
-	}
-
-	return len;
-}
-
-/****************************************************************************
- *  Function:    spi_read
- **************************************************************************** */
-ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
-{
-	memset(rxbuf, 0, MAX_BUFFER);
-	memset(txbuf, 0, MAX_BUFFER);
-	memcpy(txbuf, addr, alen);
-	*txbuf = SPI_EEPROM_READ;		/* READ memory array	*/
-
-	/*
-	 * There is a bug in 860T (?) that cuts the last byte of input
-	 * if we're reading into DPRAM. The solution we choose here is
-	 * to always read len+1 bytes (we have one extra byte at the
-	 * end of the buffer).
-	 */
-	spi_xfer(alen + len + 1);
-	memcpy(buffer, alen + rxbuf, len);
-
-	return len;
-}
-
-/****************************************************************************
- *  Function:    spi_xfer
- **************************************************************************** */
-ssize_t spi_xfer (size_t count)
-{
-	volatile immap_t *immr;
-	volatile cpm8xx_t *cp;
-	volatile spi_t *spi;
-	cbd_t *tbdf, *rbdf;
-	ushort loop;
-	int tm;
-
-	DPRINT (("*** spi_xfer entered ***\n"));
-
-	immr = (immap_t *) CONFIG_SYS_IMMR;
-	cp   = (cpm8xx_t *) &immr->im_cpm;
-
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
-	spi  = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
-#else
-	spi  = (spi_t *)&cp->cp_dparam[PROFF_SPI];
-	/* Disable relocation */
-	spi->spi_rpbase = 0;
-#endif
-
-	tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
-	rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
-
-	/* Set CS for device */
-	cp->cp_pbdat &= ~0x0001;
-
-	/* Setting tx bd status and data length */
-	tbdf->cbd_sc  = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
-	tbdf->cbd_datlen = count;
-
-	DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
-							tbdf->cbd_datlen));
-
-	/* Setting rx bd status and data length */
-	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
-	rbdf->cbd_datlen = 0;	 /* rx length has no significance */
-
-	loop = cp->cp_spmode & SPMODE_LOOP;
-	cp->cp_spmode = /*SPMODE_DIV16	|*/	/* BRG/16 mode not used here */
-			loop		|
-			SPMODE_REV	|
-			SPMODE_MSTR	|
-			SPMODE_EN	|
-			SPMODE_LEN(8)	|	/* 8 Bits per char */
-			SPMODE_PM(0x8) ;	/* medium speed */
-	cp->cp_spim = 0;			/* Mask  all SPI events */
-	cp->cp_spie = SPI_EMASK;		/* Clear all SPI events	*/
-
-	/* start spi transfer */
-	DPRINT (("*** spi_xfer: Performing transfer ...\n"));
-	cp->cp_spcom |= SPI_STR;		/* Start transmit */
-
-	/* --------------------------------
-	 * Wait for SPI transmit to get out
-	 * or time out (1 second = 1000 ms)
-	 * -------------------------------- */
-	for (tm=0; tm<1000; ++tm) {
-		if (cp->cp_spie & SPI_TXB) {	/* Tx Buffer Empty */
-			DPRINT (("*** spi_xfer: Tx buffer empty\n"));
-			break;
-		}
-		if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
-			DPRINT (("*** spi_xfer: Tx BD done\n"));
-			break;
-		}
-		udelay (1000);
-	}
-	if (tm >= 1000) {
-		printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
-	}
-	DPRINT (("*** spi_xfer: ... transfer ended\n"));
-
-#ifdef	DEBUG
-	printf ("\nspi_xfer: txbuf after xfer\n");
-	memdump ((void *) txbuf, 16);	/* dump of txbuf before transmit */
-	printf ("spi_xfer: rxbuf after xfer\n");
-	memdump ((void *) rxbuf, 16);	/* dump of rxbuf after transmit */
-	printf ("\n");
-#endif
-
-	/* Clear CS for device */
-	cp->cp_pbdat |= 0x0001;
-
-	return count;
-}
-#endif	/* CONFIG_SPI || (CONFIG_POST & CONFIG_SYS_POST_SPI) */
-
-/*
- * SPI test
- *
- * The Serial Peripheral Interface (SPI) is tested in the local loopback mode.
- * The interface is configured accordingly and several packets
- * are transfered. The configurable test parameters are:
- *   TEST_MIN_LENGTH - minimum size of packet to transfer
- *   TEST_MAX_LENGTH - maximum size of packet to transfer
- *   TEST_NUM - number of tests
- */
-
-#if CONFIG_POST & CONFIG_SYS_POST_SPI
-
-#define TEST_MIN_LENGTH		1
-#define TEST_MAX_LENGTH		MAX_BUFFER
-#define TEST_NUM		1
-
-static void packet_fill (char * packet, int length)
-{
-	char c = (char) length;
-	int i;
-
-	for (i = 0; i < length; i++)
-	{
-	    packet[i] = c++;
-	}
-}
-
-static int packet_check (char * packet, int length)
-{
-	char c = (char) length;
-	int i;
-
-	for (i = 0; i < length; i++) {
-	    if (packet[i] != c++) return -1;
-	}
-
-	return 0;
-}
-
-int spi_post_test (int flags)
-{
-	int res = -1;
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile cpm8xx_t *cp = (cpm8xx_t *) & immr->im_cpm;
-	int i;
-	int l;
-
-	spi_init_f ();
-	spi_init_r ();
-
-	cp->cp_spmode |= SPMODE_LOOP;
-
-	for (i = 0; i < TEST_NUM; i++) {
-		for (l = TEST_MIN_LENGTH; l <= TEST_MAX_LENGTH; l += 8) {
-			packet_fill ((char *)txbuf, l);
-
-			spi_xfer (l);
-
-			if (packet_check ((char *)rxbuf, l) < 0) {
-				goto Done;
-			}
-		}
-	}
-
-	res = 0;
-
-      Done:
-
-	cp->cp_spmode &= ~SPMODE_LOOP;
-
-	/*
-	 * SCC2 parameter RAM space overlaps
-	 * the SPI parameter RAM space. So we need to restore
-	 * the SCC2 configuration if it is used by UART.
-	 */
-
-#if !defined(CONFIG_8xx_CONS_NONE)
-	serial_reinit_all ();
-#endif
-
-	if (res != 0) {
-		post_log ("SPI test failed\n");
-	}
-
-	return res;
-}
-#endif	/* CONFIG_POST & CONFIG_SYS_POST_SPI */
diff --git a/cpu/mpc8xx/start.S b/cpu/mpc8xx/start.S
deleted file mode 100644
index 7cf602f..0000000
--- a/cpu/mpc8xx/start.S
+++ /dev/null
@@ -1,684 +0,0 @@
-/*
- *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
- *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- *  Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*  U-Boot - Startup Code for PowerPC based Embedded Boards
- *
- *
- *  The processor starts at 0x00000100 and the code is executed
- *  from flash. The code is organized to be at an other address
- *  in memory, but as long we don't jump around before relocating,
- *  board_init lies at a quite high address and when the cpu has
- *  jumped there, everything is ok.
- *  This works because the cpu gives the FLASH (CS0) the whole
- *  address space at startup, and board_init lies as a echo of
- *  the flash somewhere up there in the memory map.
- *
- *  board_init will change CS0 to be positioned at the correct
- *  address and (s)dram will be positioned at address 0
- */
-#include <config.h>
-#include <mpc8xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_8xx 1		/* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef  CONFIG_IDENT_STRING
-#define  CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the  MMU yet.
-*/
-#undef	MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME | MSR_RI )	/* Machine Check and Recoverable Interr. */
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
-	START_GOT
-	GOT_ENTRY(_GOT2_TABLE_)
-	GOT_ENTRY(_FIXUP_TABLE_)
-
-	GOT_ENTRY(_start)
-	GOT_ENTRY(_start_of_vectors)
-	GOT_ENTRY(_end_of_vectors)
-	GOT_ENTRY(transfer_to_handler)
-
-	GOT_ENTRY(__init_end)
-	GOT_ENTRY(_end)
-	GOT_ENTRY(__bss_start)
-	END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
-	.text
-	.long	0x27051956		/* U-Boot Magic Number			*/
-	.globl	version_string
-version_string:
-	.ascii U_BOOT_VERSION
-	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
-	.ascii CONFIG_IDENT_STRING, "\0"
-
-	. = EXC_OFF_SYS_RESET
-	.globl	_start
-_start:
-	lis	r3, CONFIG_SYS_IMMR@h		/* position IMMR */
-	mtspr	638, r3
-	li	r21, BOOTFLAG_COLD	/* Normal Power-On: Boot from FLASH	*/
-	b	boot_cold
-
-	. = EXC_OFF_SYS_RESET + 0x10
-
-	.globl	_start_warm
-_start_warm:
-	li	r21, BOOTFLAG_WARM	/* Software reboot			*/
-	b	boot_warm
-
-boot_cold:
-boot_warm:
-
-	/* Initialize machine status; enable machine check interrupt		*/
-	/*----------------------------------------------------------------------*/
-	li	r3, MSR_KERNEL		/* Set ME, RI flags */
-	mtmsr	r3
-	mtspr	SRR1, r3		/* Make SRR1 match MSR */
-
-	mfspr	r3, ICR			/* clear Interrupt Cause Register */
-
-	/* Initialize debug port registers					*/
-	/*----------------------------------------------------------------------*/
-	xor	r0, r0, r0		/* Clear R0 */
-	mtspr	LCTRL1, r0		/* Initialize debug port regs */
-	mtspr	LCTRL2, r0
-	mtspr	COUNTA, r0
-	mtspr	COUNTB, r0
-
-	/* Reset the caches							*/
-	/*----------------------------------------------------------------------*/
-
-	mfspr	r3, IC_CST		/* Clear error bits */
-	mfspr	r3, DC_CST
-
-	lis	r3, IDC_UNALL@h		/* Unlock all */
-	mtspr	IC_CST, r3
-	mtspr	DC_CST, r3
-
-	lis	r3, IDC_INVALL@h	/* Invalidate all */
-	mtspr	IC_CST, r3
-	mtspr	DC_CST, r3
-
-	lis	r3, IDC_DISABLE@h	/* Disable data cache */
-	mtspr	DC_CST, r3
-
-#if !defined(CONFIG_SYS_DELAYED_ICACHE)
-					/* On IP860 and PCU E,
-					 * we cannot enable IC yet
-					 */
-	lis	r3, IDC_ENABLE@h	/* Enable instruction cache */
-#endif
-	mtspr	IC_CST, r3
-
-	/* invalidate all tlb's							*/
-	/*----------------------------------------------------------------------*/
-
-	tlbia
-	isync
-
-	/*
-	 * Calculate absolute address in FLASH and jump there
-	 *----------------------------------------------------------------------*/
-
-	lis	r3, CONFIG_SYS_MONITOR_BASE@h
-	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
-	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
-	mtlr	r3
-	blr
-
-in_flash:
-
-	/* initialize some SPRs that are hard to access from C			*/
-	/*----------------------------------------------------------------------*/
-
-	lis	r3, CONFIG_SYS_IMMR@h		/* pass IMMR as arg1 to C routine */
-	ori	r1, r3, CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in internal DPRAM */
-	/* Note: R0 is still 0 here */
-	stwu	r0, -4(r1)		/* clear final stack frame so that	*/
-	stwu	r0, -4(r1)		/* stack backtraces terminate cleanly	*/
-
-	/*
-	 * Disable serialized ifetch and show cycles
-	 * (i.e. set processor to normal mode).
-	 * This is also a silicon bug workaround, see errata
-	 */
-
-	li	r2, 0x0007
-	mtspr	ICTRL, r2
-
-	/* Set up debug mode entry */
-
-	lis	r2, CONFIG_SYS_DER@h
-	ori	r2, r2, CONFIG_SYS_DER@l
-	mtspr	DER, r2
-
-	/* let the C-code set up the rest					*/
-	/*									*/
-	/* Be careful to keep code relocatable !				*/
-	/*----------------------------------------------------------------------*/
-
-	GET_GOT			/* initialize GOT access			*/
-
-	/* r3: IMMR */
-	bl	cpu_init_f	/* run low-level CPU init code     (from Flash)	*/
-
-	mr	r3, r21
-	/* r3: BOOTFLAG */
-	bl	board_init_f	/* run 1st part of board init code (from Flash) */
-
-
-	.globl	_start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
-	STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception.  "Never" generated on the 860. */
-	STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception.  "Never" generated on the 860. */
-	STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
-	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
-	. = 0x600
-Alignment:
-	EXCEPTION_PROLOG(SRR0, SRR1)
-	mfspr	r4,DAR
-	stw	r4,_DAR(r21)
-	mfspr	r5,DSISR
-	stw	r5,_DSISR(r21)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
-	. = 0x700
-ProgramCheck:
-	EXCEPTION_PROLOG(SRR0, SRR1)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
-		MSR_KERNEL, COPY_EE)
-
-	/* No FPU on MPC8xx.  This exception is not supposed to happen.
-	*/
-	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
-	/* I guess we could implement decrementer, and may have
-	 * to someday for timekeeping.
-	 */
-	STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-	STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
-	STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
-	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-	STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
-	STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
-	STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
-	/* On the MPC8xx, this is a software emulation interrupt.  It occurs
-	 * for all unimplemented and illegal instructions.
-	 */
-	STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
-
-	STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
-	STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
-	STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
-	STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
-
-	STD_EXCEPTION(0x1500, Reserved5, UnknownException)
-	STD_EXCEPTION(0x1600, Reserved6, UnknownException)
-	STD_EXCEPTION(0x1700, Reserved7, UnknownException)
-	STD_EXCEPTION(0x1800, Reserved8, UnknownException)
-	STD_EXCEPTION(0x1900, Reserved9, UnknownException)
-	STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
-	STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
-
-	STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
-	STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
-	STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
-	STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
-
-	.globl	_end_of_vectors
-_end_of_vectors:
-
-
-	. = 0x2000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
-	.globl	transfer_to_handler
-transfer_to_handler:
-	stw	r22,_NIP(r21)
-	lis	r22,MSR_POW@h
-	andc	r23,r23,r22
-	stw	r23,_MSR(r21)
-	SAVE_GPR(7, r21)
-	SAVE_4GPRS(8, r21)
-	SAVE_8GPRS(12, r21)
-	SAVE_8GPRS(24, r21)
-	mflr	r23
-	andi.	r24,r23,0x3f00		/* get vector offset */
-	stw	r24,TRAP(r21)
-	li	r22,0
-	stw	r22,RESULT(r21)
-	mtspr	SPRG2,r22		/* r1 is now kernel sp */
-	lwz	r24,0(r23)		/* virtual address of handler */
-	lwz	r23,4(r23)		/* where to go when done */
-	mtspr	SRR0,r24
-	mtspr	SRR1,r20
-	mtlr	r23
-	SYNC
-	rfi				/* jump to handler, enable MMU */
-
-int_return:
-	mfmsr	r28			/* Disable interrupts */
-	li	r4,0
-	ori	r4,r4,MSR_EE
-	andc	r28,r28,r4
-	SYNC				/* Some chip revs need this... */
-	mtmsr	r28
-	SYNC
-	lwz	r2,_CTR(r1)
-	lwz	r0,_LINK(r1)
-	mtctr	r2
-	mtlr	r0
-	lwz	r2,_XER(r1)
-	lwz	r0,_CCR(r1)
-	mtspr	XER,r2
-	mtcrf	0xFF,r0
-	REST_10GPRS(3, r1)
-	REST_10GPRS(13, r1)
-	REST_8GPRS(23, r1)
-	REST_GPR(31, r1)
-	lwz	r2,_NIP(r1)		/* Restore environment */
-	lwz	r0,_MSR(r1)
-	mtspr	SRR0,r2
-	mtspr	SRR1,r0
-	lwz	r0,GPR0(r1)
-	lwz	r2,GPR2(r1)
-	lwz	r1,GPR1(r1)
-	SYNC
-	rfi
-
-/* Cache functions.
-*/
-	.globl	icache_enable
-icache_enable:
-	SYNC
-	lis	r3, IDC_INVALL@h
-	mtspr	IC_CST, r3
-	lis	r3, IDC_ENABLE@h
-	mtspr	IC_CST, r3
-	blr
-
-	.globl	icache_disable
-icache_disable:
-	SYNC
-	lis	r3, IDC_DISABLE@h
-	mtspr	IC_CST, r3
-	blr
-
-	.globl	icache_status
-icache_status:
-	mfspr	r3, IC_CST
-	srwi	r3, r3, 31	/* >>31 => select bit 0 */
-	blr
-
-	.globl	dcache_enable
-dcache_enable:
-#if 0
-	SYNC
-#endif
-#if 1
-	lis	r3, 0x0400		/* Set cache mode with MMU off */
-	mtspr	MD_CTR, r3
-#endif
-
-	lis	r3, IDC_INVALL@h
-	mtspr	DC_CST, r3
-#if 0
-	lis	r3, DC_SFWT@h
-	mtspr	DC_CST, r3
-#endif
-	lis	r3, IDC_ENABLE@h
-	mtspr	DC_CST, r3
-	blr
-
-	.globl	dcache_disable
-dcache_disable:
-	SYNC
-	lis	r3, IDC_DISABLE@h
-	mtspr	DC_CST, r3
-	lis	r3, IDC_INVALL@h
-	mtspr	DC_CST, r3
-	blr
-
-	.globl	dcache_status
-dcache_status:
-	mfspr	r3, DC_CST
-	srwi	r3, r3, 31	/* >>31 => select bit 0 */
-	blr
-
-	.globl	dc_read
-dc_read:
-	mtspr	DC_ADR, r3
-	mfspr	r3, DC_DAT
-	blr
-
-/*
- * unsigned int get_immr (unsigned int mask)
- *
- * return (mask ? (IMMR & mask) : IMMR);
- */
-	.globl	get_immr
-get_immr:
-	mr	r4,r3		/* save mask */
-	mfspr	r3, IMMR	/* IMMR */
-	cmpwi	0,r4,0		/* mask != 0 ? */
-	beq	4f
-	and	r3,r3,r4	/* IMMR & mask */
-4:
-	blr
-
-	.globl get_pvr
-get_pvr:
-	mfspr	r3, PVR
-	blr
-
-
-	.globl wr_ic_cst
-wr_ic_cst:
-	mtspr	IC_CST, r3
-	blr
-
-	.globl rd_ic_cst
-rd_ic_cst:
-	mfspr	r3, IC_CST
-	blr
-
-	.globl wr_ic_adr
-wr_ic_adr:
-	mtspr	IC_ADR, r3
-	blr
-
-
-	.globl wr_dc_cst
-wr_dc_cst:
-	mtspr	DC_CST, r3
-	blr
-
-	.globl rd_dc_cst
-rd_dc_cst:
-	mfspr	r3, DC_CST
-	blr
-
-	.globl wr_dc_adr
-wr_dc_adr:
-	mtspr	DC_ADR, r3
-	blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
-	.globl	relocate_code
-relocate_code:
-	mr	r1,  r3		/* Set new stack pointer		*/
-	mr	r9,  r4		/* Save copy of Global Data pointer	*/
-	mr	r10, r5		/* Save copy of Destination Address	*/
-
-	GET_GOT
-	mr	r3,  r5				/* Destination Address	*/
-	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
-	lwz	r5, GOT(__init_end)
-	sub	r5, r5, r4
-	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
-
-	/*
-	 * Fix GOT pointer:
-	 *
-	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
-	 *
-	 * Offset:
-	 */
-	sub	r15, r10, r4
-
-	/* First our own GOT */
-	add	r12, r12, r15
-	/* then the one used by the C code */
-	add	r30, r30, r15
-
-	/*
-	 * Now relocate code
-	 */
-
-	cmplw	cr1,r3,r4
-	addi	r0,r5,3
-	srwi.	r0,r0,2
-	beq	cr1,4f		/* In place copy is not necessary	*/
-	beq	7f		/* Protect against 0 count		*/
-	mtctr	r0
-	bge	cr1,2f
-
-	la	r8,-4(r4)
-	la	r7,-4(r3)
-1:	lwzu	r0,4(r8)
-	stwu	r0,4(r7)
-	bdnz	1b
-	b	4f
-
-2:	slwi	r0,r0,2
-	add	r8,r4,r0
-	add	r7,r3,r0
-3:	lwzu	r0,-4(r8)
-	stwu	r0,-4(r7)
-	bdnz	3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4:	cmpwi	r6,0
-	add	r5,r3,r5
-	beq	7f		/* Always flush prefetch queue in any case */
-	subi	r0,r6,1
-	andc	r3,r3,r0
-	mr	r4,r3
-5:	dcbst	0,r4
-	add	r4,r4,r6
-	cmplw	r4,r5
-	blt	5b
-	sync			/* Wait for all dcbst to complete on bus */
-	mr	r4,r3
-6:	icbi	0,r4
-	add	r4,r4,r6
-	cmplw	r4,r5
-	blt	6b
-7:	sync			/* Wait for all icbi to complete on bus	*/
-	isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
-	addi	r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
-	mtlr	r0
-	blr
-
-in_ram:
-
-	/*
-	 * Relocation Function, r12 point to got2+0x8000
-	 *
-	 * Adjust got2 pointers, no need to check for 0, this code
-	 * already puts a few entries in the table.
-	 */
-	li	r0,__got2_entries@sectoff@l
-	la	r3,GOT(_GOT2_TABLE_)
-	lwz	r11,GOT(_GOT2_TABLE_)
-	mtctr	r0
-	sub	r11,r3,r11
-	addi	r3,r3,-4
-1:	lwzu	r0,4(r3)
-	cmpwi	r0,0
-	beq-	2f
-	add	r0,r0,r11
-	stw	r0,0(r3)
-2:	bdnz	1b
-
-	/*
-	 * Now adjust the fixups and the pointers to the fixups
-	 * in case we need to move ourselves again.
-	 */
-	li	r0,__fixup_entries@sectoff@l
-	lwz	r3,GOT(_FIXUP_TABLE_)
-	cmpwi	r0,0
-	mtctr	r0
-	addi	r3,r3,-4
-	beq	4f
-3:	lwzu	r4,4(r3)
-	lwzux	r0,r4,r11
-	add	r0,r0,r11
-	stw	r10,0(r3)
-	stw	r0,0(r4)
-	bdnz	3b
-4:
-clear_bss:
-	/*
-	 * Now clear BSS segment
-	 */
-	lwz	r3,GOT(__bss_start)
-	lwz	r4,GOT(_end)
-
-	cmplw	0, r3, r4
-	beq	6f
-
-	li	r0, 0
-5:
-	stw	r0, 0(r3)
-	addi	r3, r3, 4
-	cmplw	0, r3, r4
-	bne	5b
-6:
-
-	mr	r3, r9		/* Global Data pointer		*/
-	mr	r4, r10		/* Destination Address		*/
-	bl	board_init_r
-
-	/*
-	 * Copy exception vector code to low memory
-	 *
-	 * r3: dest_addr
-	 * r7: source address, r8: end address, r9: target address
-	 */
-	.globl	trap_init
-trap_init:
-	mflr	r4			/* save link register		*/
-	GET_GOT
-	lwz	r7, GOT(_start)
-	lwz	r8, GOT(_end_of_vectors)
-
-	li	r9, 0x100		/* reset vector always at 0x100 */
-
-	cmplw	0, r7, r8
-	bgelr				/* return if r7>=r8 - just in case */
-1:
-	lwz	r0, 0(r7)
-	stw	r0, 0(r9)
-	addi	r7, r7, 4
-	addi	r9, r9, 4
-	cmplw	0, r7, r8
-	bne	1b
-
-	/*
-	 * relocate `hdlr' and `int_return' entries
-	 */
-	li	r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
-	li	r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
-	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector	*/
-	cmplw	0, r7, r8
-	blt	2b
-
-	li	r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
-	bl	trap_reloc
-
-	li	r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
-	bl	trap_reloc
-
-	li	r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
-	li	r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
-	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector	*/
-	cmplw	0, r7, r8
-	blt	3b
-
-	li	r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
-	li	r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
-	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector	*/
-	cmplw	0, r7, r8
-	blt	4b
-
-	mtlr	r4			/* restore link register	*/
-	blr
diff --git a/cpu/mpc8xx/traps.c b/cpu/mpc8xx/traps.c
deleted file mode 100644
index 6efe8e0..0000000
--- a/cpu/mpc8xx/traps.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM	0x02000000
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
-	int cnt = 0;
-	unsigned long i;
-
-	printf("Call backtrace: ");
-	while (sp) {
-		if ((uint)sp > END_OF_MEM)
-			break;
-
-		i = sp[1];
-		if (cnt++ % 7 == 0)
-			printf("\n");
-		printf("%08lX ", i);
-		if (cnt > 32) break;
-		sp = (unsigned long *)*sp;
-	}
-	printf("\n");
-}
-
-void show_regs(struct pt_regs * regs)
-{
-	int i;
-
-	printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
-	       regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
-	printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
-	       regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
-	       regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
-	       regs->msr&MSR_IR ? 1 : 0,
-	       regs->msr&MSR_DR ? 1 : 0);
-
-	printf("\n");
-	for (i = 0;  i < 32;  i++) {
-		if ((i % 8) == 0)
-		{
-			printf("GPR%02d: ", i);
-		}
-
-		printf("%08lX ", regs->gpr[i]);
-		if ((i % 8) == 7)
-		{
-			printf("\n");
-		}
-	}
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
-	unsigned long fixup;
-
-	/* Probing PCI using config cycles cause this exception
-	 * when a device is not present.  Catch it and return to
-	 * the PCI exception handler.
-	 */
-	if ((fixup = search_exception_table(regs->nip)) != 0) {
-		regs->nip = fixup;
-		return;
-	}
-
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-
-	printf("Machine check in kernel mode.\n");
-	printf("Caused by (from msr): ");
-	printf("regs %p ",regs);
-	switch( regs->msr & 0x000F0000) {
-	case (0x80000000>>12):
-		printf("Machine check signal - probably due to mm fault\n"
-			"with mmu off\n");
-		break;
-	case (0x80000000>>13):
-		printf("Transfer error ack signal\n");
-		break;
-	case (0x80000000>>14):
-		printf("Data parity signal\n");
-		break;
-	case (0x80000000>>15):
-		printf("Address parity signal\n");
-		break;
-	default:
-		printf("Unknown values in msr\n");
-	}
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
-	       regs->nip, regs->msr, regs->trap);
-	_exception(0, regs);
-}
-
-void
-DebugException(struct pt_regs *regs)
-{
-  printf("Debugger trap at @ %lx\n", regs->nip );
-  show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
-  do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading.  If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
-	int	retval;
-
-	__asm__ __volatile__(			\
-		"1:	lwz %0,0(%1)\n"		\
-		"	eieio\n"		\
-		"	li %0,0\n"		\
-		"2:\n"				\
-		".section .fixup,\"ax\"\n"	\
-		"3:	li %0,-1\n"		\
-		"	b 2b\n"			\
-		".section __ex_table,\"a\"\n"	\
-		"	.align 2\n"		\
-		"	.long 1b,3b\n"		\
-		".text"				\
-		: "=r" (retval) : "r"(addr));
-
-	return (retval);
-#endif
-	return 0;
-}
diff --git a/cpu/mpc8xx/upatch.c b/cpu/mpc8xx/upatch.c
deleted file mode 100644
index a8cb735..0000000
--- a/cpu/mpc8xx/upatch.c
+++ /dev/null
@@ -1,194 +0,0 @@
-#include <common.h>
-#include <commproc.h>
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
-    defined(CONFIG_SYS_SMC_UCODE_PATCH)
-
-static void UcodeCopy (volatile cpm8xx_t *cpm);
-
-void cpm_load_patch (volatile immap_t *immr)
-{
-	immr->im_cpm.cp_rccr &= ~0x0003;	/* Disable microcode program area */
-
-	UcodeCopy ((cpm8xx_t *)&immr->im_cpm);	/* Copy ucode patch to DPRAM   */
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
-    {
-	volatile spi_t *spi = (spi_t *) & immr->im_cpm.cp_dparam[PROFF_SPI];
-	/* Activate the microcode per the instructions in the microcode manual */
-	/* NOTE:  We're only relocating the SPI parameters (not I2C).          */
-	immr->im_cpm.cp_cpmcr1 = 0x802a;	/* Write Trap register 1 value */
-	immr->im_cpm.cp_cpmcr2 = 0x8028;	/* Write Trap register 2 value */
-	spi->spi_rpbase = CONFIG_SYS_SPI_DPMEM_OFFSET;	/* Where to relocte SPI params */
-    }
-#endif
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
-    {
-	volatile iic_t *iip = (iic_t *) & immr->im_cpm.cp_dparam[PROFF_IIC];
-	/* Activate the microcode per the instructions in the microcode manual */
-	/* NOTE:  We're only relocating the I2C parameters (not SPI).          */
-	immr->im_cpm.cp_cpmcr3 = 0x802e;	/* Write Trap register 3 value */
-	immr->im_cpm.cp_cpmcr4 = 0x802c;	/* Write Trap register 4 value */
-	iip->iic_rpbase = CONFIG_SYS_I2C_DPMEM_OFFSET;	/* Where to relocte I2C params */
-    }
-#endif
-
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
-    {
-	volatile smc_uart_t *up = (smc_uart_t *) & immr->im_cpm.cp_dparam[PROFF_SMC1];
-	/* Activate the microcode per the instructions in the microcode manual */
-	/* NOTE:  We're only relocating the SMC parameters.                    */
-	immr->im_cpm.cp_cpmcr1 = 0x8080;	/* Write Trap register 1 value */
-	immr->im_cpm.cp_cpmcr2 = 0x8088;	/* Write Trap register 2 value */
-	up->smc_rpbase = CONFIG_SYS_SMC_DPMEM_OFFSET;	/* Where to relocte SMC params */
-    }
-#endif
-
-	/*
-	 * Enable DPRAM microcode to execute from the first 512 bytes
-	 * and a 256 byte extension of DPRAM.
-	 */
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
-	immr->im_cpm.cp_rccr |= 0x0002;
-#else
-	immr->im_cpm.cp_rccr |= 0x0001;
-#endif
-}
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCh)
-static ulong patch_2000[] = {
-	0x7FFFEFD9, 0x3FFD0000, 0x7FFB49F7, 0x7FF90000,
-	0x5FEFADF7, 0x5F88ADF7, 0x5FEFAFF7, 0x5F88AFF7,
-	0x3A9CFBC8, 0x77CAE1BB, 0xF4DE7FAD, 0xABAE9330,
-	0x4E08FDCF, 0x6E0FAFF8, 0x7CCF76CF, 0xFDAFF9CF,
-	0xABF88DC8, 0xAB5879F7, 0xB0927383, 0xDFD079F7,
-	0xB090E6BB, 0xE5BBE74F, 0xB3FA6F0F, 0x6FFB76CE,
-	0xEE0CF9CF, 0x2BFBEFEF, 0xCFEEF9CF, 0x76CEAD23,
-	0x90B3DF99, 0x7FDDD0C1, 0x4BF847FD, 0x7CCF76CE,
-	0xCFEF77CA, 0x7EAF7FAD, 0x7DFDF0B7, 0xEF7A7FCA,
-	0x77CAFBC8, 0x6079E722, 0xFBC85FFF, 0xDFFF5FB3,
-	0xFFFBFBC8, 0xF3C894A5, 0xE7C9EDF9, 0x7F9A7FAD,
-	0x5F36AFE8, 0x5F5BFFDF, 0xDF95CB9E, 0xAF7D5FC3,
-	0xAFED8C1B, 0x5FC3AFDD, 0x5FC5DF99, 0x7EFDB0B3,
-	0x5FB3FFFE, 0xABAE5FB3, 0xFFFE5FD0, 0x600BE6BB,
-	0x600B5FD0, 0xDFC827FB, 0xEFDF5FCA, 0xCFDE3A9C,
-	0xE7C9EDF9, 0xF3C87F9E, 0x54CA7FED, 0x2D3A3637,
-	0x756F7E9A, 0xF1CE37EF, 0x2E677FEE, 0x10EBADF8,
-	0xEFDECFEA, 0xE52F7D9F, 0xE12BF1CE, 0x5F647E9A,
-	0x4DF8CFEA, 0x5F717D9B, 0xEFEECFEA, 0x5F73E522,
-	0xEFDE5F73, 0xCFDA0B61, 0x7385DF61, 0xE7C9EDF9,
-	0x7E9A30D5, 0x1458BFFF, 0xF3C85FFF, 0xDFFFA7F8,
-	0x5F5BBFFE, 0x7F7D10D0, 0x144D5F33, 0xBFFFAF78,
-	0x5F5BBFFD, 0xA7F85F33, 0xBFFE77FD, 0x30BD4E08,
-	0xFDCFE5FF, 0x6E0FAFF8, 0x7EEF7E9F, 0xFDEFF1CF,
-	0x5F17ABF8, 0x0D5B5F5B, 0xFFEF79F7, 0x309EAFDD,
-	0x5F3147F8, 0x5F31AFED, 0x7FDD50AF, 0x497847FD,
-	0x7F9E7FED, 0x7DFD70A9, 0xEF7E7ECE, 0x6BA07F9E,
-	0x2D227EFD, 0x30DB5F5B, 0xFFFD5F5B, 0xFFEF5F5B,
-	0xFFDF0C9C, 0xAFED0A9A, 0xAFDD0C37, 0x5F37AFBD,
-	0x7FBDB081, 0x5F8147F8,
-};
-
-static ulong patch_2F00[] = {
-	0x3E303430, 0x34343737, 0xABBF9B99, 0x4B4FBDBD,
-	0x59949334, 0x9FFF37FB, 0x9B177DD9, 0x936956BB,
-	0xFBDD697B, 0xDD2FD113, 0x1DB9F7BB, 0x36313963,
-	0x79373369, 0x3193137F, 0x7331737A, 0xF7BB9B99,
-	0x9BB19795, 0x77FDFD3D, 0x573B773F, 0x737933F7,
-	0xB991D115, 0x31699315, 0x31531694, 0xBF4FBDBD,
-	0x35931497, 0x35376956, 0xBD697B9D, 0x96931313,
-	0x19797937, 0x69350000,
-};
-#else
-
-static ulong patch_2000[] = {
-	0x3fff0000, 0x3ffd0000, 0x3ffb0000, 0x3ff90000,
-	0x5fefeff8, 0x5f91eff8, 0x3ff30000, 0x3ff10000,
-	0x3a11e710, 0xedf0ccb9, 0xf318ed66, 0x7f0e5fe2,
-	0x7fedbb38, 0x3afe7468, 0x7fedf4d8, 0x8ffbb92d,
-	0xb83b77fd, 0xb0bb5eb9, 0xdfda7fed, 0x90bde74d,
-	0x6f0dcbd3, 0xe7decfed, 0xcb50cfed, 0xcfeddf6d,
-	0x914d4f74, 0x5eaedfcb, 0x9ee0e7df, 0xefbb6ffb,
-	0xe7ef7f0e, 0x9ee57fed, 0xebb7effa, 0xeb30affb,
-	0x7fea90b3, 0x7e0cf09f, 0xbffff318, 0x5fffdfff,
-	0xac35efea, 0x7fce1fc1, 0xe2ff5fbd, 0xaffbe2ff,
-	0x5fbfaffb, 0xf9a87d0f, 0xaef8770f, 0x7d0fb0a2,
-	0xeffbbfff, 0xcfef5fba, 0x7d0fbfff, 0x5fba4cf8,
-	0x7fddd09b, 0x49f847fd, 0x7efdf097, 0x7fedfffd,
-	0x7dfdf093, 0xef7e7e1e, 0x5fba7f0e, 0x3a11e710,
-	0xedf0cc87, 0xfb18ad0a, 0x1f85bbb8, 0x74283b7e,
-	0x7375e4bb, 0x2ab64fb8, 0x5c7de4bb, 0x32fdffbf,
-	0x5f0843f8, 0x7ce3e1bb, 0xe74f7ded, 0x6f0f4fe8,
-	0xc7ba32be, 0x73f2efeb, 0x600b4f78, 0xe5bb760b,
-	0x5388aef8, 0x4ef80b6a, 0xcfef9ee5, 0xabf8751f,
-	0xefef5b88, 0x741f4fe8, 0x751e760d, 0x7fdb70dd,
-	0x741cafce, 0xefcc7fce, 0x751e7088, 0x741ce7bb,
-	0x334ecfed, 0xafdbefeb, 0xe5bb760b, 0x53ceaef8,
-	0xafe8e7eb, 0x4bf8771e, 0x7e007fed, 0x4fcbe2cc,
-	0x7fbc3085, 0x7b0f7a0f, 0x34b177fd, 0xb0e75e93,
-	0xdf313e3b, 0xaf78741f, 0x741f30cc, 0xcfef5f08,
-	0x741f3e88, 0xafb8771e, 0x5f437fed, 0x0bafe2cc,
-	0x741ccfec, 0xe5ca53a9, 0x6fcb4f74, 0x5e89df27,
-	0x2a923d14, 0x4b8fdf0c, 0x751f741c, 0x6c1eeffa,
-	0xefea7fce, 0x6ffc309a, 0xefec3fca, 0x308fdf0a,
-	0xadf85e7a, 0xaf7daefd, 0x5e7adf0a, 0x5e7aafdd,
-	0x761f1088, 0x1e7c7efd, 0x3089fffe, 0x4908fb18,
-	0x5fffdfff, 0xafbbf0f7, 0x4ef85f43, 0xadf81489,
-	0x7a0f7089, 0xcfef5089, 0x7a0fdf0c, 0x5e7cafed,
-	0xbc6e780f, 0xefef780f, 0xefef790f, 0xa7f85eeb,
-	0xffef790f, 0xefef790f, 0x1489df0a, 0x5e7aadfd,
-	0x5f09fffb, 0xe79aded9, 0xeff96079, 0x607ae79a,
-	0xded8eff9, 0x60795edb, 0x607acfef, 0xefefefdf,
-	0xefbfef7f, 0xeeffedff, 0xebffe7ff, 0xafefafdf,
-	0xafbfaf7f, 0xaeffadff, 0xabffa7ff, 0x6fef6fdf,
-	0x6fbf6f7f, 0x6eff6dff, 0x6bff67ff, 0x2fef2fdf,
-	0x2fbf2f7f, 0x2eff2dff, 0x2bff27ff, 0x4e08fd1f,
-	0xe5ff6e0f, 0xaff87eef, 0x7e0ffdef, 0xf11f6079,
-	0xabf8f51e, 0x7e0af11c, 0x37cfae16, 0x7fec909a,
-	0xadf8efdc, 0xcfeae52f, 0x7d0fe12b, 0xf11c6079,
-	0x7e0a4df8, 0xcfea5ea0, 0x7d0befec, 0xcfea5ea2,
-	0xe522efdc, 0x5ea2cfda, 0x4e08fd1f, 0x6e0faff8,
-	0x7c1f761f, 0xfdeff91f, 0x6079abf8, 0x761cee00,
-	0xf91f2bfb, 0xefefcfec, 0xf91f6079, 0x761c27fb,
-	0xefdf5e83, 0xcfdc7fdd, 0x50f84bf8, 0x47fd7c1f,
-	0x761ccfcf, 0x7eef7fed, 0x7dfd70ef, 0xef7e7f1e,
-	0x771efb18, 0x6079e722, 0xe6bbe5bb, 0x2e66e5bb,
-	0x600b2ee1, 0xe2bbe2bb, 0xe2bbe2bb, 0x2f5ee2bb,
-	0xe2bb2ff9, 0x6079e2bb,
-};
-
-static ulong patch_2F00[] = {
-	0x30303030, 0x3e3e3030, 0xaf79b9b3, 0xbaa3b979,
-	0x9693369f, 0x79f79777, 0x97333fff, 0xfb3b9e9f,
-	0x79b91d11, 0x9e13f3ff, 0x3f9b6bd9, 0xe173d136,
-	0x695669d1, 0x697b3daf, 0x79b93a3a, 0x3f979f91,
-	0x379ff976, 0xf99777fd, 0x9779737d, 0xe9d6bbf9,
-	0xbfffd9df, 0x97f7fd97, 0x6f7b9bff, 0xf9bd9683,
-	0x397db973, 0xd97b3b9f, 0xd7f9f733, 0x9993bb9e,
-	0xe1f9ef93, 0x73773337, 0xb936917d, 0x11f87379,
-	0xb979d336, 0x8b7ded73, 0x1b7d9337, 0x31f3f22f,
-	0x3f2327ee, 0xeeeeeeee, 0xeeeeeeee, 0xeeeeeeee,
-	0xeeeeee4b, 0xf4fbdbd2, 0x58bb1878, 0x577fdfd2,
-	0xd573b773, 0xf7374b4f, 0xbdbd25b8, 0xb177d2d1,
-	0x7376856b, 0xbfdd687b, 0xdd2fff8f, 0x78ffff8f,
-	0xf22f0000,
-};
-#endif
-
-static void UcodeCopy (volatile cpm8xx_t *cpm)
-{
-	vu_long *p;
-	int i;
-
-	p = (vu_long *)&(cpm->cp_dpmem[0x0000]);
-	for (i=0; i < sizeof(patch_2000)/4; ++i) {
-		p[i] = patch_2000[i];
-	}
-
-	p = (vu_long *)&(cpm->cp_dpmem[0x0F00]);
-	for (i=0; i < sizeof(patch_2F00)/4; ++i) {
-		p[i] = patch_2F00[i];
-	}
-}
-
-#endif	/* CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_SPI_UCODE_PATCH */
diff --git a/cpu/mpc8xx/video.c b/cpu/mpc8xx/video.c
deleted file mode 100644
index c79c499..0000000
--- a/cpu/mpc8xx/video.c
+++ /dev/null
@@ -1,1331 +0,0 @@
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- * (C) Copyright 2002
- * Wolfgang Denk, wd@denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-/************************************************************************/
-/* ** HEADER FILES							*/
-/************************************************************************/
-
-#include <stdarg.h>
-#include <common.h>
-#include <config.h>
-#include <version.h>
-#include <timestamp.h>
-#include <i2c.h>
-#include <linux/types.h>
-#include <stdio_dev.h>
-
-#ifdef CONFIG_VIDEO
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/************************************************************************/
-/* ** DEBUG SETTINGS							*/
-/************************************************************************/
-
-#if 0
-#define VIDEO_DEBUG_COLORBARS	/* Force colorbars output */
-#endif
-
-/************************************************************************/
-/* ** VIDEO MODE SETTINGS						*/
-/************************************************************************/
-
-#if 0
-#define VIDEO_MODE_EXTENDED		/* Allow screen size bigger than visible area */
-#define VIDEO_MODE_NTSC
-#endif
-
-#define VIDEO_MODE_PAL
-
-#if 0
-#define VIDEO_BLINK			/* This enables cursor blinking (under construction) */
-#endif
-
-#define VIDEO_INFO			/* Show U-Boot information */
-#define VIDEO_INFO_X		VIDEO_LOGO_WIDTH+8
-#define VIDEO_INFO_Y		16
-
-/************************************************************************/
-/* ** VIDEO ENCODER CONSTANTS						*/
-/************************************************************************/
-
-#ifdef CONFIG_VIDEO_ENCODER_AD7176
-
-#include <video_ad7176.h>	/* Sets encoder data, mode, and visible and active area */
-
-#define VIDEO_I2C		1
-#define VIDEO_I2C_ADDR		CONFIG_VIDEO_ENCODER_AD7176_ADDR
-#endif
-
-#ifdef CONFIG_VIDEO_ENCODER_AD7177
-
-#include <video_ad7177.h>	/* Sets encoder data, mode, and visible and active area */
-
-#define VIDEO_I2C		1
-#define VIDEO_I2C_ADDR		CONFIG_VIDEO_ENCODER_AD7177_ADDR
-#endif
-
-#ifdef CONFIG_VIDEO_ENCODER_AD7179
-
-#include <video_ad7179.h>	/* Sets encoder data, mode, and visible and active area */
-
-#define VIDEO_I2C		1
-#define VIDEO_I2C_ADDR		CONFIG_VIDEO_ENCODER_AD7179_ADDR
-#endif
-
-/************************************************************************/
-/* ** VIDEO MODE CONSTANTS						*/
-/************************************************************************/
-
-#ifdef VIDEO_MODE_EXTENDED
-#define VIDEO_COLS	VIDEO_ACTIVE_COLS
-#define VIDEO_ROWS	VIDEO_ACTIVE_ROWS
-#else
-#define VIDEO_COLS	VIDEO_VISIBLE_COLS
-#define VIDEO_ROWS	VIDEO_VISIBLE_ROWS
-#endif
-
-#define VIDEO_PIXEL_SIZE	(VIDEO_MODE_BPP/8)
-#define VIDEO_SIZE		(VIDEO_ROWS*VIDEO_COLS*VIDEO_PIXEL_SIZE)	/* Total size of buffer */
-#define VIDEO_PIX_BLOCKS	(VIDEO_SIZE >> 2)	/* Number of ints */
-#define VIDEO_LINE_LEN		(VIDEO_COLS*VIDEO_PIXEL_SIZE)	/* Number of bytes per line */
-#define VIDEO_BURST_LEN		(VIDEO_COLS/8)
-
-#ifdef VIDEO_MODE_YUYV
-#define VIDEO_BG_COL	0x80D880D8	/* Background color in YUYV format */
-#else
-#define VIDEO_BG_COL	0xF8F8F8F8	/* Background color in RGB format */
-#endif
-
-/************************************************************************/
-/* ** FONT AND LOGO DATA						*/
-/************************************************************************/
-
-#include <video_font.h>			/* Get font data, width and height */
-
-#ifdef CONFIG_VIDEO_LOGO
-#include <video_logo.h>			/* Get logo data, width and height */
-
-#define VIDEO_LOGO_WIDTH	DEF_U_BOOT_LOGO_WIDTH
-#define VIDEO_LOGO_HEIGHT	DEF_U_BOOT_LOGO_HEIGHT
-#define VIDEO_LOGO_ADDR		&u_boot_logo
-#endif
-
-/************************************************************************/
-/* ** VIDEO CONTROLLER CONSTANTS					*/
-/************************************************************************/
-
-/* VCCR - VIDEO CONTROLLER CONFIGURATION REGISTER */
-
-#define VIDEO_VCCR_VON	0		/* Video controller ON */
-#define VIDEO_VCCR_CSRC	1		/* Clock source */
-#define VIDEO_VCCR_PDF	13		/* Pixel display format */
-#define VIDEO_VCCR_IEN	11		/* Interrupt enable */
-
-/* VSR - VIDEO STATUS REGISTER */
-
-#define VIDEO_VSR_CAS	6		/* Active set */
-#define VIDEO_VSR_EOF	0		/* End of frame */
-
-/* VCMR - VIDEO COMMAND REGISTER */
-
-#define VIDEO_VCMR_BD	0		/* Blank display */
-#define VIDEO_VCMR_ASEL	1		/* Active set selection */
-
-/* VBCB - VIDEO BACKGROUND COLOR BUFFER REGISTER */
-
-#define VIDEO_BCSR4_RESET_BIT	21	/* BCSR4 - Extern video encoder reset */
-#define VIDEO_BCSR4_EXTCLK_BIT	22	/* BCSR4 - Extern clock enable */
-#define VIDEO_BCSR4_VIDLED_BIT	23	/* BCSR4 - Video led disable */
-
-/************************************************************************/
-/* ** CONSOLE CONSTANTS							*/
-/************************************************************************/
-
-#ifdef	CONFIG_VIDEO_LOGO
-#define CONSOLE_ROWS		((VIDEO_ROWS - VIDEO_LOGO_HEIGHT) / VIDEO_FONT_HEIGHT)
-#define VIDEO_LOGO_SKIP		(VIDEO_COLS - VIDEO_LOGO_WIDTH)
-#else
-#define CONSOLE_ROWS		(VIDEO_ROWS / VIDEO_FONT_HEIGHT)
-#endif
-
-#define CONSOLE_COLS		(VIDEO_COLS / VIDEO_FONT_WIDTH)
-#define CONSOLE_ROW_SIZE	(VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN)
-#define CONSOLE_ROW_FIRST	(video_console_address)
-#define CONSOLE_ROW_SECOND	(video_console_address + CONSOLE_ROW_SIZE)
-#define CONSOLE_ROW_LAST	(video_console_address + CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-#define CONSOLE_SIZE		(CONSOLE_ROW_SIZE * CONSOLE_ROWS)
-#define CONSOLE_SCROLL_SIZE	(CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-
-/*
- * Simple color definitions
- */
-#define CONSOLE_COLOR_BLACK	 0
-#define CONSOLE_COLOR_RED	 1
-#define CONSOLE_COLOR_GREEN	 2
-#define CONSOLE_COLOR_YELLOW	 3
-#define CONSOLE_COLOR_BLUE	 4
-#define CONSOLE_COLOR_MAGENTA	 5
-#define CONSOLE_COLOR_CYAN	 6
-#define CONSOLE_COLOR_GREY	13
-#define CONSOLE_COLOR_GREY2	14
-#define CONSOLE_COLOR_WHITE	15	/* Must remain last / highest */
-
-/************************************************************************/
-/* ** BITOPS MACROS							*/
-/************************************************************************/
-
-#define HISHORT(i)	((i >> 16)&0xffff)
-#define LOSHORT(i)	(i & 0xffff)
-#define HICHAR(s)	((i >> 8)&0xff)
-#define LOCHAR(s)	(i & 0xff)
-#define HI(c)		((c >> 4)&0xf)
-#define LO(c)		(c & 0xf)
-#define SWAPINT(i)	(HISHORT(i) | (LOSHORT(i) << 16))
-#define SWAPSHORT(s)	(HICHAR(s) | (LOCHAR(s) << 8))
-#define SWAPCHAR(c)	(HI(c) | (LO(c) << 4))
-#define BITMASK(b)	(1 << (b))
-#define GETBIT(v,b)	(((v) & BITMASK(b)) > 0)
-#define SETBIT(v,b,d)	(v = (((d)>0) ? (v) | BITMASK(b): (v) & ~BITMASK(b)))
-
-/************************************************************************/
-/* ** STRUCTURES							*/
-/************************************************************************/
-
-typedef struct {
-	unsigned char V, Y1, U, Y2;
-} tYUYV;
-
-/* This structure is based on the Video Ram in the MPC823. */
-typedef struct VRAM {
-	unsigned	hx:2,		/* Horizontal sync */
-			vx:2,		/* Vertical sync */
-			fx:2,		/* Frame */
-			bx:2,		/* Blank */
-			res1:6,		/* Reserved */
-			vds:2,		/* Video Data Select */
-			inter:1,	/* Interrupt */
-			res2:2,		/* Reserved */
-			lcyc:11,	/* Loop/video cycles */
-			lp:1,		/* Loop start/end */
-			lst:1;		/* Last entry */
-} VRAM;
-
-/************************************************************************/
-/* ** VARIABLES								*/
-/************************************************************************/
-
-static int
-	video_panning_range_x = 0,	/* Video mode invisible pixels x range */
-	video_panning_range_y = 0,	/* Video mode invisible pixels y range */
-	video_panning_value_x = 0,	/* Video mode x panning value (absolute) */
-	video_panning_value_y = 0,	/* Video mode y panning value (absolute) */
-	video_panning_factor_x = 0,	/* Video mode x panning value (-127 +127) */
-	video_panning_factor_y = 0,	/* Video mode y panning value (-127 +127) */
-	console_col = 0,		/* Cursor col */
-	console_row = 0,		/* Cursor row */
-	video_palette[16];		/* Our palette */
-
-static const int video_font_draw_table[] =
-	{ 0x00000000, 0x0000ffff, 0xffff0000, 0xffffffff };
-
-static char
-	video_color_fg = 0,		/* Current fg color index (0-15) */
-	video_color_bg = 0,		/* Current bg color index (0-15) */
-	video_enable = 0;		/* Video has been initialized? */
-
-static void
-	*video_fb_address,		/* Frame buffer address */
-	*video_console_address;		/* Console frame buffer start address */
-
-/************************************************************************/
-/* ** MEMORY FUNCTIONS (32bit)						*/
-/************************************************************************/
-
-static void memsetl (int *p, int c, int v)
-{
-	while (c--)
-		*(p++) = v;
-}
-
-static void memcpyl (int *d, int *s, int c)
-{
-	while (c--)
-		*(d++) = *(s++);
-}
-
-/************************************************************************/
-/* ** VIDEO DRAWING AND COLOR FUNCTIONS					*/
-/************************************************************************/
-
-static int video_maprgb (int r, int g, int b)
-{
-#ifdef VIDEO_MODE_YUYV
-	unsigned int pR, pG, pB;
-	tYUYV YUYV;
-	unsigned int *ret = (unsigned int *) &YUYV;
-
-	/* Transform (0-255) components to (0-100) */
-
-	pR = r * 100 / 255;
-	pG = g * 100 / 255;
-	pB = b * 100 / 255;
-
-	/* Calculate YUV values (0-255) from RGB beetween 0-100 */
-
-	YUYV.Y1 = YUYV.Y2 = 209 * (pR + pG + pB) / 300 + 16;
-	YUYV.U	= pR - (pG * 3 / 4) - (pB / 4) + 128;
-	YUYV.V	= pB - (pR / 4) - (pG * 3 / 4) + 128;
-	return *ret;
-#endif
-#ifdef VIDEO_MODE_RGB
-	return ((r >> 3) << 11) | ((g > 2) << 6) | (b >> 3);
-#endif
-}
-
-static void video_setpalette (int color, int r, int g, int b)
-{
-	color &= 0xf;
-
-	video_palette[color] = video_maprgb (r, g, b);
-
-	/* Swap values if our panning offset is odd */
-	if (video_panning_value_x & 1)
-		video_palette[color] = SWAPINT (video_palette[color]);
-}
-
-static void video_fill (int color)
-{
-	memsetl (video_fb_address, VIDEO_PIX_BLOCKS, color);
-}
-
-static void video_setfgcolor (int i)
-{
-	video_color_fg = i & 0xf;
-}
-
-static void video_setbgcolor (int i)
-{
-	video_color_bg = i & 0xf;
-}
-
-static int video_pickcolor (int i)
-{
-	return video_palette[i & 0xf];
-}
-
-/* Absolute console plotting functions */
-
-#ifdef VIDEO_BLINK
-static void video_revchar (int xx, int yy)
-{
-	int rows;
-	u8 *dest;
-
-	dest = video_fb_address + yy * VIDEO_LINE_LEN + xx * 2;
-
-	for (rows = VIDEO_FONT_HEIGHT; rows--; dest += VIDEO_LINE_LEN) {
-		switch (VIDEO_FONT_WIDTH) {
-		case 16:
-			((u32 *) dest)[6] ^= 0xffffffff;
-			((u32 *) dest)[7] ^= 0xffffffff;
-			/* FALL THROUGH */
-		case 12:
-			((u32 *) dest)[4] ^= 0xffffffff;
-			((u32 *) dest)[5] ^= 0xffffffff;
-			/* FALL THROUGH */
-		case 8:
-			((u32 *) dest)[2] ^= 0xffffffff;
-			((u32 *) dest)[3] ^= 0xffffffff;
-			/* FALL THROUGH */
-		case 4:
-			((u32 *) dest)[0] ^= 0xffffffff;
-			((u32 *) dest)[1] ^= 0xffffffff;
-		}
-	}
-}
-#endif
-
-static void video_drawchars (int xx, int yy, unsigned char *s, int count)
-{
-	u8 *cdat, *dest, *dest0;
-	int rows, offset, c;
-	u32 eorx, fgx, bgx;
-
-	offset = yy * VIDEO_LINE_LEN + xx * 2;
-	dest0 = video_fb_address + offset;
-
-	fgx = video_pickcolor (video_color_fg);
-	bgx = video_pickcolor (video_color_bg);
-
-	if (xx & 1) {
-		fgx = SWAPINT (fgx);
-		bgx = SWAPINT (bgx);
-	}
-
-	eorx = fgx ^ bgx;
-
-	switch (VIDEO_FONT_WIDTH) {
-	case 4:
-	case 8:
-		while (count--) {
-			c = *s;
-			cdat = video_fontdata + c * VIDEO_FONT_HEIGHT;
-			for (rows = VIDEO_FONT_HEIGHT, dest = dest0;
-			     rows--;
-			     dest += VIDEO_LINE_LEN) {
-				u8 bits = *cdat++;
-
-				((u32 *) dest)[0] =
-					(video_font_draw_table[bits >> 6] & eorx) ^ bgx;
-				((u32 *) dest)[1] =
-					(video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
-				if (VIDEO_FONT_WIDTH == 8) {
-					((u32 *) dest)[2] =
-						(video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
-					((u32 *) dest)[3] =
-						(video_font_draw_table[bits & 3] & eorx) ^ bgx;
-				}
-			}
-			dest0 += VIDEO_FONT_WIDTH * 2;
-			s++;
-		}
-		break;
-	case 12:
-	case 16:
-		while (count--) {
-			cdat = video_fontdata + (*s) * (VIDEO_FONT_HEIGHT << 1);
-			for (rows = VIDEO_FONT_HEIGHT, dest = dest0; rows--;
-				 dest += VIDEO_LINE_LEN) {
-				u8 bits = *cdat++;
-
-				((u32 *) dest)[0] =
-					(video_font_draw_table[bits >> 6] & eorx) ^ bgx;
-				((u32 *) dest)[1] =
-					(video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
-				((u32 *) dest)[2] =
-					(video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
-				((u32 *) dest)[3] =
-					(video_font_draw_table[bits & 3] & eorx) ^ bgx;
-				bits = *cdat++;
-				((u32 *) dest)[4] =
-					(video_font_draw_table[bits >> 6] & eorx) ^ bgx;
-				((u32 *) dest)[5] =
-					(video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
-				if (VIDEO_FONT_WIDTH == 16) {
-					((u32 *) dest)[6] =
-						(video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
-					((u32 *) dest)[7] =
-						(video_font_draw_table[bits & 3] & eorx) ^ bgx;
-				}
-			}
-			s++;
-			dest0 += VIDEO_FONT_WIDTH * 2;
-		}
-		break;
-	}
-}
-
-static inline void video_drawstring (int xx, int yy, char *s)
-{
-	video_drawchars (xx, yy, (unsigned char *)s, strlen (s));
-}
-
-/* Relative to console plotting functions */
-
-static void video_putchars (int xx, int yy, unsigned char *s, int count)
-{
-#ifdef CONFIG_VIDEO_LOGO
-	video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, s, count);
-#else
-	video_drawchars (xx, yy, s, count);
-#endif
-}
-
-static void video_putchar (int xx, int yy, unsigned char c)
-{
-#ifdef CONFIG_VIDEO_LOGO
-	video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, &c, 1);
-#else
-	video_drawchars (xx, yy, &c, 1);
-#endif
-}
-
-static inline void video_putstring (int xx, int yy, unsigned char *s)
-{
-	video_putchars (xx, yy, (unsigned char *)s, strlen ((char *)s));
-}
-
-/************************************************************************/
-/* ** VIDEO CONTROLLER LOW-LEVEL FUNCTIONS				*/
-/************************************************************************/
-
-#if !defined(CONFIG_RRVISION)
-static void video_mode_dupefield (VRAM * source, VRAM * dest, int entries)
-{
-	int i;
-
-	for (i = 0; i < entries; i++) {
-		dest[i] = source[i];	/* Copy the entire record */
-		dest[i].fx = (!dest[i].fx) * 3;	/* Negate field bit */
-	}
-
-	dest[0].lcyc++;			/* Add a cycle to the first entry */
-	dest[entries - 1].lst = 1;	/* Set end of ram entries */
-}
-#endif
-
-static void inline video_mode_addentry (VRAM * vr,
-	int Hx, int Vx, int Fx, int Bx,
-	int VDS, int INT, int LCYC, int LP, int LST)
-{
-	vr->hx = Hx;
-	vr->vx = Vx;
-	vr->fx = Fx;
-	vr->bx = Bx;
-	vr->vds = VDS;
-	vr->inter = INT;
-	vr->lcyc = LCYC;
-	vr->lp = LP;
-	vr->lst = LST;
-}
-
-#define ADDENTRY(a,b,c,d,e,f,g,h,i)	video_mode_addentry(&vr[entry++],a,b,c,d,e,f,g,h,i)
-
-static int video_mode_generate (void)
-{
-	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	VRAM *vr = (VRAM *) (((void *) immap) + 0xb00);	/* Pointer to the VRAM table */
-	int DX, X1, X2, DY, Y1, Y2, entry = 0, fifo;
-
-	/* CHECKING PARAMETERS */
-
-	if (video_panning_factor_y < -128)
-		video_panning_factor_y = -128;
-
-	if (video_panning_factor_y > 128)
-		video_panning_factor_y = 128;
-
-	if (video_panning_factor_x < -128)
-		video_panning_factor_x = -128;
-
-	if (video_panning_factor_x > 128)
-		video_panning_factor_x = 128;
-
-	/* Setting panning */
-
-	DX = video_panning_range_x = (VIDEO_ACTIVE_COLS - VIDEO_COLS) * 2;
-	DY = video_panning_range_y = (VIDEO_ACTIVE_ROWS - VIDEO_ROWS) / 2;
-
-	video_panning_value_x = (video_panning_factor_x + 128) * DX / 256;
-	video_panning_value_y = (video_panning_factor_y + 128) * DY / 256;
-
-	/* We assume these are burst units (multiplied by 2, we need it pari) */
-	X1 = video_panning_value_x & 0xfffe;
-	X2 = DX - X1;
-
-	/* We assume these are field line units (divided by 2, we need it pari) */
-	Y1 = video_panning_value_y & 0xfffe;
-	Y2 = DY - Y1;
-
-	debug("X1=%d, X2=%d, Y1=%d, Y2=%d, DX=%d, DY=%d VIDEO_COLS=%d \n",
-	      X1, X2, Y1, Y2, DX, DY, VIDEO_COLS);
-
-#ifdef VIDEO_MODE_NTSC
-/*
- *	     Hx Vx Fx Bx VDS INT LCYC LP LST
- *
- * Retrace blanking
- */
-	ADDENTRY (0, 0, 3, 0, 1, 0, 3, 1, 0);
-	ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
-	ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
-	ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-/*
- * Vertical blanking
- */
-	ADDENTRY (0, 0, 0, 0, 1, 0, 18, 1, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 243, 0, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-/*
- * Odd field active area (TOP)
- */
-	if (Y1 > 0) {
-		ADDENTRY (0, 0, 0, 0, 1, 0, Y1, 1, 0);
-		ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
-		ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
-		ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-	}
-/*
- * Odd field active area
- */
-	ADDENTRY (0, 0, 0, 0, 1, 0, 240 - DY, 1, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
-	ADDENTRY (3, 0, 0, 3, 1, 0, 8 + X1, 0, 0);
-	ADDENTRY (3, 0, 0, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
-
-	if (X2 > 0)
-		ADDENTRY (3, 0, 0, 3, 1, 0, X2, 0, 0);
-
-	ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-
-/*
- * Odd field active area (BOTTOM)
- */
-	if (Y1 > 0) {
-		ADDENTRY (0, 0, 0, 0, 1, 0, Y2, 1, 0);
-		ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
-		ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
-		ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-	}
-/*
- * Vertical blanking
- */
-	ADDENTRY (0, 0, 0, 0, 1, 0, 4, 1, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 243, 0, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-/*
- * Vertical blanking
- */
-	ADDENTRY (0, 0, 3, 0, 1, 0, 19, 1, 0);
-	ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
-	ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
-	ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-/*
- * Even field active area (TOP)
- */
-	if (Y1 > 0) {
-		ADDENTRY (0, 0, 3, 0, 1, 0, Y1, 1, 0);
-		ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
-		ADDENTRY (3, 0, 3, 3, 1, 0, 1448, 0, 0);
-		ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-	}
-/*
- * Even field active area (CENTER)
- */
-	ADDENTRY (0, 0, 3, 0, 1, 0, 240 - DY, 1, 0);
-	ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
-	ADDENTRY (3, 0, 3, 3, 1, 0, 8 + X1, 0, 0);
-	ADDENTRY (3, 0, 3, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
-
-	if (X2 > 0)
-		ADDENTRY (3, 0, 3, 3, 1, 0, X2, 0, 0);
-
-	ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-/*
- * Even field active area (BOTTOM)
- */
-	if (Y1 > 0) {
-		ADDENTRY (0, 0, 3, 0, 1, 0, Y2, 1, 0);
-		ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
-		ADDENTRY (3, 0, 3, 3, 1, 0, 1448, 0, 0);
-		ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-	}
-/*
- * Vertical blanking
- */
-	ADDENTRY (0, 0, 3, 0, 1, 0, 1, 1, 0);
-	ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
-	ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
-	ADDENTRY (3, 0, 3, 0, 1, 1, 32, 1, 1);
-#endif
-
-#ifdef VIDEO_MODE_PAL
-
-#if defined(CONFIG_RRVISION)
-
-#define HPW   160  /* horizontal pulse width (was 139)	*/
-#define VPW	2  /* vertical pulse width		*/
-#define HBP   104  /* horizontal back porch (was 112)	*/
-#define VBP    19  /* vertical back porch (was 19)	*/
-#define VID_R 240  /* number of rows			*/
-
-	debug ("[VIDEO CTRL] Starting to add controller entries...");
-/*
- * Even field
- */
-	ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
-	ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
-	ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
-
-	ADDENTRY (0, 0, 0, 3, 1, 0, VPW, 1, 0);
-	ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
-	ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
-
-	ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
-	ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
-	ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
-/*
- * Active area
- */
-	ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
-	ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
-	ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
-	ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0);
-	ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
-
-	ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
-	ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
-	ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
-/*
- * Odd field
- */
-	ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
-	ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
-	ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
-
-	ADDENTRY (0, 0, 0, 3, 1, 0, VPW+1, 1, 0);
-	ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
-	ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
-
-	ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
-	ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
-	ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
-/*
- * Active area
- */
-	ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
-	ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
-	ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
-	ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0);
-	ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
-
-	ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
-	ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
-	ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
-
-	debug ("done\n");
-
-#else  /* !CONFIG_RRVISION */
-
-/*
- *	Hx Vx Fx Bx VDS INT LCYC LP LST
- *
- * vertical; blanking
- */
-	ADDENTRY (0, 0, 0, 0, 1, 0, 22, 1, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 263, 0, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-/*
- * active area (TOP)
- */
-	if (Y1 > 0) {
-		ADDENTRY (0, 0, 0, 0, 1, 0, Y1, 1, 0);	/* 11? */
-		ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
-		ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
-		ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-	}
-/*
- * field active area (CENTER)
- */
-	ADDENTRY (0, 0, 0, 0, 1, 0, 288 - DY, 1, 0);	/* 265? */
-	ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
-	ADDENTRY (3, 0, 0, 3, 1, 0, 8 + X1, 0, 0);
-	ADDENTRY (3, 0, 0, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
-
-	if (X2 > 0)
-		ADDENTRY (3, 0, 0, 1, 1, 0, X2, 0, 0);
-
-	ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-/*
- * field active area (BOTTOM)
- */
-	if (Y2 > 0) {
-		ADDENTRY (0, 0, 0, 0, 1, 0, Y2, 1, 0);	/* 12? */
-		ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
-		ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
-		ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-	}
-/*
- * field vertical; blanking
- */
-	ADDENTRY (0, 0, 0, 0, 1, 0, 2, 1, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 263, 0, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
-	ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-/*
- * Create the other field (like this, but whit other field selected,
- * one more cycle loop and a last identifier)
- */
-	video_mode_dupefield (vr, &vr[entry], entry);
-#endif /* CONFIG_RRVISION */
-
-#endif /* VIDEO_MODE_PAL */
-
-	/* See what FIFO are we using */
-	fifo = GETBIT (immap->im_vid.vid_vsr, VIDEO_VSR_CAS);
-
-	/* Set number of lines and burst (only one frame for now) */
-	if (fifo) {
-		immap->im_vid.vid_vfcr0 = VIDEO_BURST_LEN |
-			(VIDEO_BURST_LEN << 8) | ((VIDEO_ROWS / 2) << 19);
-	} else {
-		immap->im_vid.vid_vfcr1 = VIDEO_BURST_LEN |
-			(VIDEO_BURST_LEN << 8) | ((VIDEO_ROWS / 2) << 19);
-	}
-
-	SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_ASEL, !fifo);
-
-/*
- * Wait until changes are applied (not done)
- * while (GETBIT(immap->im_vid.vid_vsr, VIDEO_VSR_CAS) == fifo) ;
- */
-
-	/* Return number of VRAM entries */
-	return entry * 2;
-}
-
-static void video_encoder_init (void)
-{
-#ifdef VIDEO_I2C
-	int rc;
-
-	/* Initialize the I2C */
-	debug ("[VIDEO ENCODER] Initializing I2C bus...\n");
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
-#ifdef CONFIG_FADS
-	/* Reset ADV7176 chip */
-	debug ("[VIDEO ENCODER] Resetting encoder...\n");
-	(*(int *) BCSR4) &= ~(1 << 21);
-
-	/* Wait for 5 ms inside the reset */
-	debug ("[VIDEO ENCODER] Waiting for encoder reset...\n");
-	udelay (5000);
-
-	/* Take ADV7176 out of reset */
-	(*(int *) BCSR4) |= 1 << 21;
-
-	/* Wait for 5 ms after the reset */
-	udelay (5000);
-#endif	/* CONFIG_FADS */
-
-	/* Send configuration */
-#ifdef DEBUG
-	{
-		int i;
-
-		puts ("[VIDEO ENCODER] Configuring the encoder...\n");
-
-		printf ("Sending %zu bytes (@ %08lX) to I2C 0x%lX:\n   ",
-			sizeof(video_encoder_data),
-			(ulong)video_encoder_data,
-			(ulong)VIDEO_I2C_ADDR);
-		for (i=0; i<sizeof(video_encoder_data); ++i) {
-			printf(" %02X", video_encoder_data[i]);
-		}
-		putc ('\n');
-	}
-#endif	/* DEBUG */
-
-	if ((rc = i2c_write (VIDEO_I2C_ADDR, 0, 1,
-			 video_encoder_data,
-			 sizeof(video_encoder_data))) != 0) {
-		printf ("i2c_send error: rc=%d\n", rc);
-		return;
-	}
-#endif	/* VIDEO_I2C */
-	return;
-}
-
-static void video_ctrl_init (void *memptr)
-{
-	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-	video_fb_address = memptr;
-
-	/* Set background */
-	debug ("[VIDEO CTRL] Setting background color...\n");
-	immap->im_vid.vid_vbcb = VIDEO_BG_COL;
-
-	/* Show the background */
-	debug ("[VIDEO CTRL] Forcing background...\n");
-	SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_BD, 1);
-
-	/* Turn off video controller */
-	debug ("[VIDEO CTRL] Turning off video controller...\n");
-	SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 0);
-
-#ifdef CONFIG_FADS
-	/* Turn on Video Port LED */
-	debug ("[VIDEO CTRL] Turning off video port led...\n");
-	SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 1);
-
-	/* Disable internal clock */
-	debug ("[VIDEO CTRL] Disabling internal clock...\n");
-	SETBIT (*(int *) BCSR4, VIDEO_BCSR4_EXTCLK_BIT, 0);
-#endif
-
-	/* Generate and make active a new video mode */
-	debug ("[VIDEO CTRL] Generating video mode...\n");
-	video_mode_generate ();
-
-	/* Start of frame buffer (even and odd frame, to make it working with */
-	/* any selected active set) */
-	debug ("[VIDEO CTRL] Setting frame buffer address...\n");
-	immap->im_vid.vid_vfaa1 =
-		immap->im_vid.vid_vfaa0 = (u32) video_fb_address;
-	immap->im_vid.vid_vfba1 =
-	immap->im_vid.vid_vfba0 =
-		(u32) video_fb_address + VIDEO_LINE_LEN;
-
-	/* YUV, Big endian, SHIFT/CLK/CLK input (BEFORE ENABLING 27MHZ EXT CLOCK) */
-	debug ("[VIDEO CTRL] Setting pixel mode and clocks...\n");
-	immap->im_vid.vid_vccr = 0x2042;
-
-	/* Configure port pins */
-	debug ("[VIDEO CTRL] Configuring input/output pins...\n");
-	immap->im_ioport.iop_pdpar = 0x1fff;
-	immap->im_ioport.iop_pddir = 0x0000;
-
-#ifdef CONFIG_FADS
-	/* Turn on Video Port Clock - ONLY AFTER SET VCCR TO ENABLE EXTERNAL CLOCK */
-	debug ("[VIDEO CTRL] Turning on video clock...\n");
-	SETBIT (*(int *) BCSR4, VIDEO_BCSR4_EXTCLK_BIT, 1);
-
-	/* Turn on Video Port LED */
-	debug ("[VIDEO CTRL] Turning on video port led...\n");
-	SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 0);
-#endif
-#ifdef CONFIG_RRVISION
-	debug ("PC5->Output(1): enable PAL clock");
-	immap->im_ioport.iop_pcpar &= ~(0x0400);
-	immap->im_ioport.iop_pcdir |=   0x0400 ;
-	immap->im_ioport.iop_pcdat |=   0x0400 ;
-	debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
-	       immap->im_ioport.iop_pdpar,
-	       immap->im_ioport.iop_pddir,
-	       immap->im_ioport.iop_pddat);
-	debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
-	       immap->im_ioport.iop_pcpar,
-	       immap->im_ioport.iop_pcdir,
-	       immap->im_ioport.iop_pcdat);
-#endif	/* CONFIG_RRVISION */
-
-	/* Blanking the screen. */
-	debug ("[VIDEO CTRL] Blanking the screen...\n");
-	video_fill (VIDEO_BG_COL);
-
-	/*
-	 * Turns on Aggressive Mode. Normally, turning on the caches
-	 * will cause the screen to flicker when the caches try to
-	 * fill. This gives the FIFO's for the Video Controller
-	 * higher priority and prevents flickering because of
-	 * underrun. This may still be an issue when using FLASH,
-	 * since accessing data from Flash is so slow.
-	 */
-	debug ("[VIDEO CTRL] Turning on aggressive mode...\n");
-	immap->im_siu_conf.sc_sdcr = 0x40;
-
-	/* Turn on video controller */
-	debug ("[VIDEO CTRL] Turning on video controller...\n");
-	SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 1);
-
-	/* Show the display */
-	debug ("[VIDEO CTRL] Enabling the video...\n");
-	SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_BD, 0);
-}
-
-/************************************************************************/
-/* ** CONSOLE FUNCTIONS							*/
-/************************************************************************/
-
-static void console_scrollup (void)
-{
-	/* Copy up rows ignoring the first one */
-	memcpyl (CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE >> 2);
-
-	/* Clear the last one */
-	memsetl (CONSOLE_ROW_LAST, CONSOLE_ROW_SIZE >> 2, VIDEO_BG_COL);
-}
-
-static inline void console_back (void)
-{
-	console_col--;
-
-	if (console_col < 0) {
-		console_col = CONSOLE_COLS - 1;
-		console_row--;
-		if (console_row < 0)
-			console_row = 0;
-	}
-
-	video_putchar ( console_col * VIDEO_FONT_WIDTH,
-			console_row * VIDEO_FONT_HEIGHT, ' ');
-}
-
-static inline void console_newline (void)
-{
-	console_row++;
-	console_col = 0;
-
-	/* Check if we need to scroll the terminal */
-	if (console_row >= CONSOLE_ROWS) {
-		/* Scroll everything up */
-		console_scrollup ();
-
-		/* Decrement row number */
-		console_row--;
-	}
-}
-
-void video_putc (const char c)
-{
-	if (!video_enable) {
-		serial_putc (c);
-		return;
-	}
-
-	switch (c) {
-	case 13:			/* Simply ignore this */
-		break;
-
-	case '\n':			/* Next line, please */
-		console_newline ();
-		break;
-
-	case 9:				/* Tab (8 chars alignment) */
-		console_col |= 0x0008;	/* Next 8 chars boundary */
-		console_col &= ~0x0007;	/* Set this bit to zero */
-
-		if (console_col >= CONSOLE_COLS)
-			console_newline ();
-		break;
-
-	case 8:				/* Eat last character */
-		console_back ();
-		break;
-
-	default:			/* Add to the console */
-		video_putchar ( console_col * VIDEO_FONT_WIDTH,
-				console_row * VIDEO_FONT_HEIGHT, c);
-		console_col++;
-		/* Check if we need to go to next row */
-		if (console_col >= CONSOLE_COLS)
-			console_newline ();
-	}
-}
-
-void video_puts (const char *s)
-{
-	int count = strlen (s);
-
-	if (!video_enable)
-		while (count--)
-			serial_putc (*s++);
-	else
-		while (count--)
-			video_putc (*s++);
-}
-
-/************************************************************************/
-/* ** CURSOR BLINKING FUNCTIONS						*/
-/************************************************************************/
-
-#ifdef VIDEO_BLINK
-
-#define BLINK_TIMER_ID		0
-#define BLINK_TIMER_HZ		2
-
-static unsigned char blink_enabled = 0;
-static timer_t blink_timer;
-
-static void blink_update (void)
-{
-	static int blink_row = -1, blink_col = -1, blink_old = 0;
-
-	/* Check if we have a new position to invert */
-	if ((console_row != blink_row) || (console_col != blink_col)) {
-		/* Check if we need to reverse last character */
-		if (blink_old)
-			video_revchar ( blink_col * VIDEO_FONT_WIDTH,
-					(blink_row
-#ifdef CONFIG_VIDEO_LOGO
-					 + VIDEO_LOGO_HEIGHT
-#endif
-					) * VIDEO_FONT_HEIGHT);
-
-		/* Update values */
-		blink_row = console_row;
-		blink_col = console_col;
-		blink_old = 0;
-	}
-
-/* Reverse this character */
-	blink_old = !blink_old;
-	video_revchar ( console_col * VIDEO_FONT_WIDTH,
-			(console_row
-#ifdef CONFIG_VIDEO_LOGO
-			+ VIDEO_LOGO_HEIGHT
-#endif
-			) * VIDEO_FONT_HEIGHT);
-
-}
-
-/*
- * Handler for blinking cursor
- */
-static void blink_handler (void *arg)
-{
-/* Blink */
-	blink_update ();
-/* Ack the timer */
-	timer_ack (&blink_timer);
-}
-
-int blink_set (int blink)
-{
-	int ret = blink_enabled;
-
-	if (blink)
-		timer_enable (&blink_timer);
-	else
-		timer_disable (&blink_timer);
-
-	blink_enabled = blink;
-
-	return ret;
-}
-
-static inline void blink_close (void)
-{
-	timer_close (&blink_timer);
-}
-
-static inline void blink_init (void)
-{
-	timer_init (&blink_timer,
-			BLINK_TIMER_ID, BLINK_TIMER_HZ,
-			blink_handler);
-}
-#endif
-
-/************************************************************************/
-/* ** LOGO PLOTTING FUNCTIONS						*/
-/************************************************************************/
-
-#ifdef CONFIG_VIDEO_LOGO
-void easylogo_plot (fastimage_t * image, void *screen, int width, int x,
-					int y)
-{
-	int skip = width - image->width, xcount, ycount = image->height;
-
-#ifdef VIDEO_MODE_YUYV
-	ushort *source = (ushort *) image->data;
-	ushort *dest   = (ushort *) screen + y * width + x;
-
-	while (ycount--) {
-		xcount = image->width;
-		while (xcount--)
-			*dest++ = *source++;
-		dest += skip;
-	}
-#endif
-#ifdef VIDEO_MODE_RGB
-	unsigned char
-	*source = (unsigned short *) image->data,
-			*dest = (unsigned short *) screen + ((y * width) + x) * 3;
-
-	while (ycount--) {
-		xcount = image->width * 3;
-		memcpy (dest, source, xcount);
-		source += xcount;
-		dest += ycount;
-	}
-#endif
-}
-
-static void *video_logo (void)
-{
-	u16 *screen = video_fb_address, width = VIDEO_COLS;
-#ifdef VIDEO_INFO
-# ifndef CONFIG_FADS
-	char temp[32];
-# endif
-	char info[80];
-#endif /* VIDEO_INFO */
-
-	easylogo_plot (VIDEO_LOGO_ADDR, screen, width, 0, 0);
-
-#ifdef VIDEO_INFO
-	sprintf (info, "%s (%s - %s) ",
-		 U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
-	video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y, info);
-
-	sprintf (info, "(C) 2002 DENX Software Engineering");
-	video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT,
-					info);
-
-	sprintf (info, "    Wolfgang DENK, wd@denx.de");
-	video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2,
-					info);
-#ifndef CONFIG_FADS		/* all normal boards */
-	/* leave one blank line */
-
-	sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash",
-		strmhz(temp, gd->cpu_clk),
-		gd->ram_size >> 20,
-		gd->bd->bi_flashsize >> 20 );
-	video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 4,
-					info);
-#else				/* FADS :-( */
-	sprintf (info, "MPC823 CPU at 50 MHz on FADS823 board");
-	video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT,
-					  info);
-
-	sprintf (info, "2MB FLASH - 8MB DRAM - 4MB SRAM");
-	video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2,
-					  info);
-#endif
-#endif
-
-	return video_fb_address + VIDEO_LOGO_HEIGHT * VIDEO_LINE_LEN;
-}
-#endif
-
-/************************************************************************/
-/* ** VIDEO HIGH-LEVEL FUNCTIONS					*/
-/************************************************************************/
-
-static int video_init (void *videobase)
-{
-	/* Initialize the encoder */
-	debug ("[VIDEO] Initializing video encoder...\n");
-	video_encoder_init ();
-
-	/* Initialize the video controller */
-	debug ("[VIDEO] Initializing video controller at %08x...\n",
-		   (int) videobase);
-	video_ctrl_init (videobase);
-
-	/* Setting the palette */
-	video_setpalette  (CONSOLE_COLOR_BLACK,	     0,	   0,	 0);
-	video_setpalette  (CONSOLE_COLOR_RED,	  0xFF,	   0,	 0);
-	video_setpalette  (CONSOLE_COLOR_GREEN,	     0, 0xFF,	 0);
-	video_setpalette  (CONSOLE_COLOR_YELLOW,  0xFF, 0xFF,	 0);
-	video_setpalette  (CONSOLE_COLOR_BLUE,	     0,	   0, 0xFF);
-	video_setpalette  (CONSOLE_COLOR_MAGENTA, 0xFF,	   0, 0xFF);
-	video_setpalette  (CONSOLE_COLOR_CYAN,	     0, 0xFF, 0xFF);
-	video_setpalette  (CONSOLE_COLOR_GREY,	  0xAA, 0xAA, 0xAA);
-	video_setpalette  (CONSOLE_COLOR_GREY2,	  0xF8, 0xF8, 0xF8);
-	video_setpalette  (CONSOLE_COLOR_WHITE,	  0xFF, 0xFF, 0xFF);
-
-#ifndef CONFIG_SYS_WHITE_ON_BLACK
-	video_setfgcolor (CONSOLE_COLOR_BLACK);
-	video_setbgcolor (CONSOLE_COLOR_GREY2);
-#else
-	video_setfgcolor (CONSOLE_COLOR_GREY2);
-	video_setbgcolor (CONSOLE_COLOR_BLACK);
-#endif	/* CONFIG_SYS_WHITE_ON_BLACK */
-
-#ifdef CONFIG_VIDEO_LOGO
-	/* Paint the logo and retrieve tv base address */
-	debug ("[VIDEO] Drawing the logo...\n");
-	video_console_address = video_logo ();
-#else
-	video_console_address = video_fb_address;
-#endif
-
-#ifdef VIDEO_BLINK
-	/* Enable the blinking (under construction) */
-	blink_init ();
-	blink_set (0);				/* To Fix! */
-#endif
-
-	/* Initialize the console */
-	console_col = 0;
-	console_row = 0;
-	video_enable = 1;
-
-#ifdef VIDEO_MODE_PAL
-# define VIDEO_MODE_TMP1	"PAL"
-#endif
-#ifdef VIDEO_MODE_NTSC
-# define VIDEO_MODE_TMP1	"NTSC"
-#endif
-#ifdef VIDEO_MODE_YUYV
-# define VIDEO_MODE_TMP2	"YCbYCr"
-#endif
-#ifdef VIDEO_MODE_RGB
-# define VIDEO_MODE_TMP2	"RGB"
-#endif
-	debug ( VIDEO_MODE_TMP1
-		" %dx%dx%d (" VIDEO_MODE_TMP2 ") on %s - console %dx%d\n",
-			VIDEO_COLS, VIDEO_ROWS, VIDEO_MODE_BPP,
-			VIDEO_ENCODER_NAME, CONSOLE_COLS, CONSOLE_ROWS);
-	return 0;
-}
-
-int drv_video_init (void)
-{
-	int error, devices = 1;
-
-	struct stdio_dev videodev;
-
-	video_init ((void *)(gd->fb_base));	/* Video initialization */
-
-/* Device initialization */
-
-	memset (&videodev, 0, sizeof (videodev));
-
-	strcpy (videodev.name, "video");
-	videodev.ext = DEV_EXT_VIDEO;	/* Video extensions */
-	videodev.flags = DEV_FLAGS_OUTPUT;	/* Output only */
-	videodev.putc = video_putc;	/* 'putc' function */
-	videodev.puts = video_puts;	/* 'puts' function */
-
-	error = stdio_register (&videodev);
-
-	return (error == 0) ? devices : error;
-}
-
-/************************************************************************/
-/* ** ROM capable initialization part - needed to reserve FB memory	*/
-/************************************************************************/
-
-/*
- * This is called early in the system initialization to grab memory
- * for the video controller.
- * Returns new address for monitor, after reserving video buffer memory
- *
- * Note that this is running from ROM, so no write access to global data.
- */
-ulong video_setmem (ulong addr)
-{
-	/* Allocate pages for the frame buffer. */
-	addr -= VIDEO_SIZE;
-
-	debug ("Reserving %dk for Video Framebuffer at: %08lx\n",
-		VIDEO_SIZE>>10, addr);
-
-	return (addr);
-}
-
-#endif
diff --git a/cpu/mpc8xx/wlkbd.c b/cpu/mpc8xx/wlkbd.c
deleted file mode 100644
index 13009e2..0000000
--- a/cpu/mpc8xx/wlkbd.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-
-#ifdef CONFIG_WL_4PPM_KEYBOARD
-
-/* WIP: Wireless keyboard on SMC
- */
-int	drv_wlkbd_init (void)
-{
-    return 0 ;
-}
-
-#endif	/* CONFIG_WL_4PPM_KEYBOARD */