summaryrefslogtreecommitdiff
path: root/cpu/mpc8xx
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-01-04 16:28:35 +0000
committerwdenk <wdenk>2004-01-04 16:28:35 +0000
commit180d3f74e4738ee107e269cbb949481075dd789a (patch)
treece40863d3e1b3ff07a5027d788ff1fdb5416d0d7 /cpu/mpc8xx
parentdd875c767e6fb0f4fecfb799b706d84562a7acee (diff)
downloadu-boot-imx-180d3f74e4738ee107e269cbb949481075dd789a.zip
u-boot-imx-180d3f74e4738ee107e269cbb949481075dd789a.tar.gz
u-boot-imx-180d3f74e4738ee107e269cbb949481075dd789a.tar.bz2
* Fix problems caused by Robert Schwebel's cramfs patch
* Patch by Scott McNutt, 02 Jan 2004: Add support for the Nios Active Serial Memory Interface (ASMI) on Cyclone devices * Patch by Andrea Marson, 16 Dec 2003: Add support for the PPChameleon ME and HI modules * Patch by Yuli Barcohen, 22 Dec 2003: Add support for Motorola DUET ADS board (MPC87x/88x)
Diffstat (limited to 'cpu/mpc8xx')
-rw-r--r--cpu/mpc8xx/cpu.c104
-rw-r--r--cpu/mpc8xx/cpu_init.c24
-rw-r--r--cpu/mpc8xx/fec.c44
-rw-r--r--cpu/mpc8xx/interrupts.c20
4 files changed, 132 insertions, 60 deletions
diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c
index 2ef1321..3504422 100644
--- a/cpu/mpc8xx/cpu.c
+++ b/cpu/mpc8xx/cpu.c
@@ -45,24 +45,16 @@ static char *cpu_warning = "\n " \
#if ((defined(CONFIG_MPC86x) || defined(CONFIG_MPC855)) && \
!defined(CONFIG_MPC862))
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ char *id_str =
# if defined(CONFIG_MPC855)
-# define ID_STR "PC855"
-# elif defined(CONFIG_MPC852T)
-# define ID_STR "PC852T"
-# elif defined(CONFIG_MPC859T)
-# define ID_STR "PC859T"
-# elif defined(CONFIG_MPC859DSL)
-# define ID_STR "PC859DSL"
+ "PC855";
# elif defined(CONFIG_MPC860P)
-# define ID_STR "PC860P"
-# elif defined(CONFIG_MPC866T)
-# define ID_STR "PC866T"
+ "PC860P";
# else
-# define ID_STR "PC86x" /* unknown 86x chip */
+ NULL;
# endif
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
uint k, m;
char buf[32];
@@ -78,12 +70,12 @@ static int check_CPU (long clock, uint pvr, uint immr)
k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
m = 0;
+ /*
+ * Some boards use sockets so different CPUs can be used.
+ * We have to check chip version in run time.
+ */
switch (k) {
-#ifdef CONFIG_MPC866_et_al
- /* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
- case 0x08000003: pre = 'M'; suf = ""; m = 1; break;
-#else
- case 0x00020001: pre = 'p'; suf = ""; break;
+ case 0x00020001: pre = 'P'; suf = ""; break;
case 0x00030001: suf = ""; break;
case 0x00120003: suf = "A"; break;
case 0x00130003: suf = "A3"; break;
@@ -98,18 +90,38 @@ static int check_CPU (long clock, uint pvr, uint immr)
case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
case 0x05010000: suf = "D3"; m = 1; break;
case 0x05020000: suf = "D4"; m = 1; break;
- case 0x08000003: suf = ""; m = 1; break;
/* this value is not documented anywhere */
case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
-#endif
+ /* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
+ case 0x08000003: pre = 'M'; suf = ""; m = 1;
+ if (id_str == NULL)
+ id_str =
+# if defined(CONFIG_MPC852T)
+ "PC852T";
+# elif defined(CONFIG_MPC859T)
+ "PC859T";
+# elif defined(CONFIG_MPC859DSL)
+ "PC859DSL";
+# elif defined(CONFIG_MPC866T)
+ "PC866T";
+# else
+ "PC866x"; /* Unknown chip from MPC866 family */
+# endif
+ break;
+ case 0x09000000: pre = 'M'; mid = suf = ""; m = 1;
+ if (id_str == NULL)
+ id_str = "PC885"; /* 870/875/880/885 */
+ break;
default: suf = NULL; break;
}
+ if (id_str == NULL)
+ id_str = "PC86x"; /* Unknown 86x chip */
if (suf)
- printf ("%c" ID_STR "%sZPnn%s", pre, mid, suf);
+ printf ("%c%s%sZPnn%s", pre, id_str, mid, suf);
else
- printf ("unknown M" ID_STR " (0x%08x)", k);
+ printf ("unknown M%s (0x%08x)", id_str, k);
printf (" at %s MHz:", strmhz (buf, clock));
@@ -471,36 +483,46 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
/*
* Get timebase clock frequency (like cpu_clk in Hz)
*
- * See table 15-5 pp. 15-16, and SCCR[RTSEL] pp. 15-27.
+ * See sections 14.2 and 14.6 of the User's Manual
*/
unsigned long get_tbclk (void)
{
DECLARE_GLOBAL_DATA_PTR;
- volatile immap_t *immr = (volatile immap_t *) CFG_IMMR;
- ulong oscclk, factor;
+ uint immr = get_immr (0); /* Return full IMMR contents */
+ volatile immap_t *immap = (volatile immap_t *)(immr & 0xFFFF0000);
+ ulong oscclk, factor, pll;
- if (immr->im_clkrst.car_sccr & SCCR_TBS) {
+ if (immap->im_clkrst.car_sccr & SCCR_TBS) {
return (gd->cpu_clk / 16);
}
-#define PLPRCR_val(a) (((CFG_PLPRCR) & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
-#ifdef CONFIG_MPC866_et_al
- /* MFN
- MFI + -------
- MFD + 1
- factor = -----------------
- (PDF + 1) * 2^S
- */
- factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/
- (PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S));
-#else
- factor = PLPRCR_val(MF)+1;
-#endif
+ pll = immap->im_clkrst.car_plprcr;
+
+#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
+
+ /*
+ * For newer PQ1 chips (MPC866/87x/88x families), PLL multiplication
+ * factor is calculated as follows:
+ *
+ * MFN
+ * MFI + -------
+ * MFD + 1
+ * factor = -----------------
+ * (PDF + 1) * 2^S
+ *
+ * For older chips, it's just MF field of PLPRCR plus one.
+ */
+ if ((immr & 0xFFFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
+ factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/
+ (PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S));
+ } else {
+ factor = PLPRCR_val(MF)+1;
+ }
oscclk = gd->cpu_clk / factor;
- if ((immr->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
+ if ((immap->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
return (oscclk / 4);
}
return (oscclk / 16);
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
index 8f06dd1..cbf2126 100644
--- a/cpu/mpc8xx/cpu_init.c
+++ b/cpu/mpc8xx/cpu_init.c
@@ -42,6 +42,7 @@ void cpu_init_f (volatile immap_t * immr)
{
#ifndef CONFIG_MBX
volatile memctl8xx_t *memctl = &immr->im_memctl;
+ ulong mfmask;
#endif
ulong reg;
@@ -86,16 +87,23 @@ void cpu_init_f (volatile immap_t * immr)
/* If CFG_PLPRCR (set in the various *_config.h files) tries to
* set the MF field, then just copy CFG_PLPRCR over car_plprcr,
- * otherwise OR in CFG_PLPRCR so we do not change the currentMF
+ * otherwise OR in CFG_PLPRCR so we do not change the current MF
* field value.
+ *
+ * For newer (starting MPC866) chips PLPRCR layout is different.
*/
-#if ((CFG_PLPRCR & PLPRCR_MF_MSK) != 0)
- reg = CFG_PLPRCR; /* reset control bits */
-#else
- reg = immr->im_clkrst.car_plprcr;
- reg &= PLPRCR_MF_MSK; /* isolate MF field */
- reg |= CFG_PLPRCR; /* reset control bits */
-#endif
+ if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK)
+ mfmask = PLPRCR_MFACT_MSK;
+ else
+ mfmask = PLPRCR_MF_MSK;
+
+ if ((CFG_PLPRCR & mfmask) != 0)
+ reg = CFG_PLPRCR; /* reset control bits */
+ else {
+ reg = immr->im_clkrst.car_plprcr;
+ reg &= mfmask; /* isolate MF-related fields */
+ reg |= CFG_PLPRCR; /* reset control bits */
+ }
immr->im_clkrst.car_plprcr = reg;
/*
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index 6b579c9..811ac79 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -217,8 +217,10 @@ static int fec_init(struct eth_device* dev, bd_t * bd)
volatile immap_t *immr = (immap_t *) CFG_IMMR;
volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
-#if defined(CONFIG_FADS) && \
- ( defined(CONFIG_MPC860T) || defined(CONFIG_MPC866_et_al) )
+#if defined(CONFIG_FADS) /* FADS family uses FPGA (BCSR) to control PHYs */
+#if defined(CONFIG_DUET_ADS)
+ *(vu_char *)BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST);
+#else
/* configure FADS for fast (FEC) ethernet, half-duplex */
/* The LXT970 needs about 50ms to recover from reset, so
* wait for it by discovering the PHY before leaving eth_init().
@@ -234,7 +236,8 @@ static int fec_init(struct eth_device* dev, bd_t * bd)
*bcsr4 |= BCSR4_FETHRST;
udelay (10);
}
-#endif
+#endif /* CONFIG_DUET_ADS */
+#endif /* CONFIG_FADS */
/* Whack a reset.
* A delay is required between a reset of the FEC block and
* initialization of other FEC registers because the reset takes
@@ -350,7 +353,20 @@ static int fec_init(struct eth_device* dev, bd_t * bd)
*/
fecp->fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
-#if !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+#if defined(CONFIG_DUET) /* MPC87x/88x have got 2 FECs and different pinout */
+ immr->im_ioport.iop_papar |= 0xf830;
+ immr->im_ioport.iop_padir |= 0x0830;
+ immr->im_ioport.iop_padir &= ~0xf000;
+ immr->im_cpm.cp_pbpar |= 0x00001001;
+ immr->im_cpm.cp_pbdir &= ~0x00001001;
+ immr->im_ioport.iop_pcpar |= 0x000c;
+ immr->im_ioport.iop_pcdir &= ~0x000c;
+ immr->im_ioport.iop_pdpar |= 0x0080;
+ immr->im_ioport.iop_pddir &= ~0x0080;
+ immr->im_cpm.cp_pepar |= 0x00000003;
+ immr->im_cpm.cp_pedir |= 0x00000003;
+ immr->im_cpm.cp_peso &= ~0x00000003;
+#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
/* Configure all of port D for MII.
*/
immr->im_ioport.iop_pdpar = 0x1fff;
@@ -465,7 +481,7 @@ static uint phytype;
#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
-
+#define PHY_ID_DM9161 0x0181B880 /* Davicom DM9161 */
/* send command to phy using mii, wait for result */
static uint
@@ -541,6 +557,9 @@ mii_discover_phy(void)
case PHY_ID_LSI80225B:
printf("LSI L80225/B\n");
break;
+ case PHY_ID_DM9161:
+ printf("Davicom DM9161\n");
+ break;
default:
printf("0x%08x\n", phytype);
break;
@@ -614,7 +633,20 @@ void mii_init (void)
*/
fecp->fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
-#if !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+#if defined(CONFIG_DUET) /* MPC87x/88x have got 2 FECs and different pinout */
+ immr->im_ioport.iop_papar |= 0xf830;
+ immr->im_ioport.iop_padir |= 0x0830;
+ immr->im_ioport.iop_padir &= ~0xf000;
+ immr->im_cpm.cp_pbpar |= 0x00001001;
+ immr->im_cpm.cp_pbdir &= ~0x00001001;
+ immr->im_ioport.iop_pcpar |= 0x000c;
+ immr->im_ioport.iop_pcdir &= ~0x000c;
+ immr->im_ioport.iop_pdpar |= 0x0080;
+ immr->im_ioport.iop_pddir &= ~0x0080;
+ immr->im_cpm.cp_pepar |= 0x00000003;
+ immr->im_cpm.cp_pedir |= 0x00000003;
+ immr->im_cpm.cp_peso &= ~0x00000003;
+#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
/* Configure all of port D for MII.
*/
immr->im_ioport.iop_pdpar = 0x1fff;
diff --git a/cpu/mpc8xx/interrupts.c b/cpu/mpc8xx/interrupts.c
index 558dc09..20e7012 100644
--- a/cpu/mpc8xx/interrupts.c
+++ b/cpu/mpc8xx/interrupts.c
@@ -274,11 +274,21 @@ void timer_interrupt_cpu (struct pt_regs *regs)
/* Reset Timer Expired and Timers Interrupt Status */
immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
__asm__ ("nop");
-#ifdef CONFIG_MPC866_et_al
- immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
-#else
- immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS | PLPRCR_TMIST;
-#endif
+ /*
+ Clear TEXPS (and TMIST on older chips). SPLSS (on older
+ chips) is cleared too.
+
+ Bitwise OR is a read-modify-write operation so ALL bits
+ which are cleared by writing `1' would be cleared by
+ operations like
+
+ immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
+
+ The same can be achieved by simple writing of the PLPRCR
+ to itself. If a bit value should be preserved, read the
+ register, ZERO the bit and write, not OR, the result back.
+ */
+ immr->im_clkrst.car_plprcr = immr->im_clkrst.car_plprcr;
}
/************************************************************************/