diff options
| author | wdenk <wdenk> | 2003-07-17 23:16:40 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2003-07-17 23:16:40 +0000 |
| commit | 2535d60277cc295adf75cd5721dcecd840c69a63 (patch) | |
| tree | a4a7c42580ded1e631658cec4f7a26d8e677a342 /cpu/mpc8xx/fec.c | |
| parent | 945af8d723a29e9b6289d84250745ed0dc16fc81 (diff) | |
| download | u-boot-imx-2535d60277cc295adf75cd5721dcecd840c69a63.zip u-boot-imx-2535d60277cc295adf75cd5721dcecd840c69a63.tar.gz u-boot-imx-2535d60277cc295adf75cd5721dcecd840c69a63.tar.bz2 | |
* Patch by Martin Krause, 17 Jul 2003:
add delay to get I2C working with "imm" command and s3c24x0_i2c.c
* Patch by Richard Woodruff, 17 July 03:
- Fixed bug in OMAP1510 baud rate divisor settings.
* Patch by Nye Liu, 16 July 2003:
MPC860FADS fixes:
- add MPC86xADS support (uses MPC86xADS.h)
- add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
o PLPRCR changes
o BRG changes (EXTAL/XTAL restricted to 10MHz)
o don't trust gclk() software measurement by default, depend on
CONFIG_8xx_GCLK_FREQ
- add DRAM SIMM not installed detection
- use more "correct" SDRAM initialization sequence
- allow different SDRAM sizes (8xxADS has 8M)
- default DER is 0
- remove unused MAMR defines from FADS860T.h (all done in fads.c)
- rename MAMR/MBMR defines to be more consistent. Should eventually
be merged into MxMR to better reflect the PowerQUICC datasheet.
* Patch by Yuli Barcohen, 16 Jul 2003:
support new Motorola PQ2FADS-ZU evaluation board which replaced
MPC8260ADS and MPC8266ADS
Diffstat (limited to 'cpu/mpc8xx/fec.c')
| -rw-r--r-- | cpu/mpc8xx/fec.c | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c index 85ba6b2..8ac7842 100644 --- a/cpu/mpc8xx/fec.c +++ b/cpu/mpc8xx/fec.c @@ -217,7 +217,8 @@ static int fec_init(struct eth_device* dev, bd_t * bd) volatile immap_t *immr = (immap_t *) CFG_IMMR; volatile fec_t *fecp = &(immr->im_cpm.cp_fec); -#if defined(CONFIG_FADS) && defined(CONFIG_MPC860T) +#if defined(CONFIG_FADS) && \ + ( defined(CONFIG_MPC860T) || defined(CONFIG_MPC866_et_al) ) /* configure FADS for fast (FEC) ethernet, half-duplex */ /* The LXT970 needs about 50ms to recover from reset, so * wait for it by discovering the PHY before leaving eth_init(). |