summaryrefslogtreecommitdiff
path: root/cpu/mpc8xx/fec.c
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-01-04 16:28:35 +0000
committerwdenk <wdenk>2004-01-04 16:28:35 +0000
commit180d3f74e4738ee107e269cbb949481075dd789a (patch)
treece40863d3e1b3ff07a5027d788ff1fdb5416d0d7 /cpu/mpc8xx/fec.c
parentdd875c767e6fb0f4fecfb799b706d84562a7acee (diff)
downloadu-boot-imx-180d3f74e4738ee107e269cbb949481075dd789a.zip
u-boot-imx-180d3f74e4738ee107e269cbb949481075dd789a.tar.gz
u-boot-imx-180d3f74e4738ee107e269cbb949481075dd789a.tar.bz2
* Fix problems caused by Robert Schwebel's cramfs patch
* Patch by Scott McNutt, 02 Jan 2004: Add support for the Nios Active Serial Memory Interface (ASMI) on Cyclone devices * Patch by Andrea Marson, 16 Dec 2003: Add support for the PPChameleon ME and HI modules * Patch by Yuli Barcohen, 22 Dec 2003: Add support for Motorola DUET ADS board (MPC87x/88x)
Diffstat (limited to 'cpu/mpc8xx/fec.c')
-rw-r--r--cpu/mpc8xx/fec.c44
1 files changed, 38 insertions, 6 deletions
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index 6b579c9..811ac79 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -217,8 +217,10 @@ static int fec_init(struct eth_device* dev, bd_t * bd)
volatile immap_t *immr = (immap_t *) CFG_IMMR;
volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
-#if defined(CONFIG_FADS) && \
- ( defined(CONFIG_MPC860T) || defined(CONFIG_MPC866_et_al) )
+#if defined(CONFIG_FADS) /* FADS family uses FPGA (BCSR) to control PHYs */
+#if defined(CONFIG_DUET_ADS)
+ *(vu_char *)BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST);
+#else
/* configure FADS for fast (FEC) ethernet, half-duplex */
/* The LXT970 needs about 50ms to recover from reset, so
* wait for it by discovering the PHY before leaving eth_init().
@@ -234,7 +236,8 @@ static int fec_init(struct eth_device* dev, bd_t * bd)
*bcsr4 |= BCSR4_FETHRST;
udelay (10);
}
-#endif
+#endif /* CONFIG_DUET_ADS */
+#endif /* CONFIG_FADS */
/* Whack a reset.
* A delay is required between a reset of the FEC block and
* initialization of other FEC registers because the reset takes
@@ -350,7 +353,20 @@ static int fec_init(struct eth_device* dev, bd_t * bd)
*/
fecp->fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
-#if !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+#if defined(CONFIG_DUET) /* MPC87x/88x have got 2 FECs and different pinout */
+ immr->im_ioport.iop_papar |= 0xf830;
+ immr->im_ioport.iop_padir |= 0x0830;
+ immr->im_ioport.iop_padir &= ~0xf000;
+ immr->im_cpm.cp_pbpar |= 0x00001001;
+ immr->im_cpm.cp_pbdir &= ~0x00001001;
+ immr->im_ioport.iop_pcpar |= 0x000c;
+ immr->im_ioport.iop_pcdir &= ~0x000c;
+ immr->im_ioport.iop_pdpar |= 0x0080;
+ immr->im_ioport.iop_pddir &= ~0x0080;
+ immr->im_cpm.cp_pepar |= 0x00000003;
+ immr->im_cpm.cp_pedir |= 0x00000003;
+ immr->im_cpm.cp_peso &= ~0x00000003;
+#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
/* Configure all of port D for MII.
*/
immr->im_ioport.iop_pdpar = 0x1fff;
@@ -465,7 +481,7 @@ static uint phytype;
#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
-
+#define PHY_ID_DM9161 0x0181B880 /* Davicom DM9161 */
/* send command to phy using mii, wait for result */
static uint
@@ -541,6 +557,9 @@ mii_discover_phy(void)
case PHY_ID_LSI80225B:
printf("LSI L80225/B\n");
break;
+ case PHY_ID_DM9161:
+ printf("Davicom DM9161\n");
+ break;
default:
printf("0x%08x\n", phytype);
break;
@@ -614,7 +633,20 @@ void mii_init (void)
*/
fecp->fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
-#if !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+#if defined(CONFIG_DUET) /* MPC87x/88x have got 2 FECs and different pinout */
+ immr->im_ioport.iop_papar |= 0xf830;
+ immr->im_ioport.iop_padir |= 0x0830;
+ immr->im_ioport.iop_padir &= ~0xf000;
+ immr->im_cpm.cp_pbpar |= 0x00001001;
+ immr->im_cpm.cp_pbdir &= ~0x00001001;
+ immr->im_ioport.iop_pcpar |= 0x000c;
+ immr->im_ioport.iop_pcdir &= ~0x000c;
+ immr->im_ioport.iop_pdpar |= 0x0080;
+ immr->im_ioport.iop_pddir &= ~0x0080;
+ immr->im_cpm.cp_pepar |= 0x00000003;
+ immr->im_cpm.cp_pedir |= 0x00000003;
+ immr->im_cpm.cp_peso &= ~0x00000003;
+#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
/* Configure all of port D for MII.
*/
immr->im_ioport.iop_pdpar = 0x1fff;