* Patch by Jon Loeliger, 2005-07-25

  Move the TSEC driver out of cpu/mpc85xx as it will be shared
  by the upcoming mpc83xx family as well.

3 files changed, 1 insertions, 1569 deletions

diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index 996915e..5298dc1 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(CPU).a
 
 START	= start.o resetvec.o
-COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o tsec.o \
+COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
 	  pci.o serial_scc.o commproc.o ether_fcc.o i2c.o spd_sdram.o
 OBJS	= $(COBJS)
 
diff --git a/cpu/mpc85xx/tsec.c b/cpu/mpc85xx/tsec.c
deleted file mode 100644
index 5ac6334..0000000
--- a/cpu/mpc85xx/tsec.c
+++ /dev/null
@@ -1,1074 +0,0 @@
-/*
- * tsec.c
- * Freescale Three Speed Ethernet Controller driver
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2003, Motorola, Inc.
- * maintained by Jon Loeliger (loeliger@freescale.com)
- * author Andy Fleming
- *
- */
-
-#include <config.h>
-#include <mpc85xx.h>
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <command.h>
-
-#if defined(CONFIG_TSEC_ENET)
-#include "tsec.h"
-
-#define TX_BUF_CNT 2
-
-static uint rxIdx;	/* index of the current RX buffer */
-static uint txIdx;	/* index of the current TX buffer */
-
-typedef volatile struct rtxbd {
-	txbd8_t txbd[TX_BUF_CNT];
-	rxbd8_t rxbd[PKTBUFSRX];
-}  RTXBD;
-
-struct tsec_info_struct {
-	unsigned int phyaddr;
-	u32 flags;
-	unsigned int phyregidx;
-};
-
-
-/* The tsec_info structure contains 3 values which the
- * driver uses to determine how to operate a given ethernet
- * device.  For now, the structure is initialized with the
- * knowledge that all current implementations have 2 TSEC
- * devices, and one FEC.  The information needed is:
- *  phyaddr - The address of the PHY which is attached to
- *	the given device.
- *
- *  flags - This variable indicates whether the device
- *	supports gigabit speed ethernet, and whether it should be
- *	in reduced mode.
- *
- *  phyregidx - This variable specifies which ethernet device
- *	controls the MII Management registers which are connected
- *	to the PHY.  For 8540/8560, only TSEC1 (index 0) has
- *	access to the PHYs, so all of the entries have "0".
- *
- * The values specified in the table are taken from the board's
- * config file in include/configs/.  When implementing a new
- * board with ethernet capability, it is necessary to define:
- *   TSEC1_PHY_ADDR
- *   TSEC1_PHYIDX
- *   TSEC2_PHY_ADDR
- *   TSEC2_PHYIDX
- *
- * and for 8560:
- *   FEC_PHY_ADDR
- *   FEC_PHYIDX
- */
-static struct tsec_info_struct tsec_info[] = {
-#ifdef CONFIG_MPC85XX_TSEC1
-	{TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX},
-#else
-	{ 0, 0, 0},
-#endif
-#ifdef CONFIG_MPC85XX_TSEC2
-	{TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX},
-#else
-	{ 0, 0, 0},
-#endif
-#ifdef CONFIG_MPC85XX_FEC
-	{FEC_PHY_ADDR, 0, FEC_PHYIDX},
-#else
-#    ifdef CONFIG_MPC85XX_TSEC3
-	{TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX},
-#    else
-	{ 0, 0, 0},
-#    endif
-#    ifdef CONFIG_MPC85XX_TSEC4
-	{TSEC4_PHY_ADDR, TSEC_REDUCED, TSEC4_PHYIDX},
-#    else
-	{ 0, 0, 0},
-#    endif
-#endif
-};
-
-#define MAXCONTROLLERS	(4)
-
-static int relocated = 0;
-
-static struct tsec_private *privlist[MAXCONTROLLERS];
-
-#ifdef __GNUC__
-static RTXBD rtx __attribute__ ((aligned(8)));
-#else
-#error "rtx must be 64-bit aligned"
-#endif
-
-static int tsec_send(struct eth_device* dev, volatile void *packet, int length);
-static int tsec_recv(struct eth_device* dev);
-static int tsec_init(struct eth_device* dev, bd_t * bd);
-static void tsec_halt(struct eth_device* dev);
-static void init_registers(volatile tsec_t *regs);
-static void startup_tsec(struct eth_device *dev);
-static int init_phy(struct eth_device *dev);
-void write_phy_reg(struct tsec_private *priv, uint regnum, uint value);
-uint read_phy_reg(struct tsec_private *priv, uint regnum);
-struct phy_info * get_phy_info(struct eth_device *dev);
-void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
-static void adjust_link(struct eth_device *dev);
-static void relocate_cmds(void);
-
-/* Initialize device structure. Returns success if PHY
- * initialization succeeded (i.e. if it recognizes the PHY)
- */
-int tsec_initialize(bd_t *bis, int index, char *devname)
-{
-	struct eth_device* dev;
-	int i;
-	struct tsec_private *priv;
-
-	dev = (struct eth_device*) malloc(sizeof *dev);
-
-	if(NULL == dev)
-		return 0;
-
-	memset(dev, 0, sizeof *dev);
-
-	priv = (struct tsec_private *) malloc(sizeof(*priv));
-
-	if(NULL == priv)
-		return 0;
-
-	privlist[index] = priv;
-	priv->regs = (volatile tsec_t *)(TSEC_BASE_ADDR + index*TSEC_SIZE);
-	priv->phyregs = (volatile tsec_t *)(TSEC_BASE_ADDR +
-			tsec_info[index].phyregidx*TSEC_SIZE);
-
-	priv->phyaddr = tsec_info[index].phyaddr;
-	priv->flags = tsec_info[index].flags;
-
-	sprintf(dev->name, devname);
-	dev->iobase = 0;
-	dev->priv   = priv;
-	dev->init   = tsec_init;
-	dev->halt   = tsec_halt;
-	dev->send   = tsec_send;
-	dev->recv   = tsec_recv;
-
-	/* Tell u-boot to get the addr from the env */
-	for(i=0;i<6;i++)
-		dev->enetaddr[i] = 0;
-
-	eth_register(dev);
-
-
-	/* Reset the MAC */
-	priv->regs->maccfg1 |= MACCFG1_SOFT_RESET;
-	priv->regs->maccfg1 &= ~(MACCFG1_SOFT_RESET);
-
-	/* Try to initialize PHY here, and return */
-	return init_phy(dev);
-}
-
-
-/* Initializes data structures and registers for the controller,
- * and brings the interface up.	 Returns the link status, meaning
- * that it returns success if the link is up, failure otherwise.
- * This allows u-boot to find the first active controller. */
-int tsec_init(struct eth_device* dev, bd_t * bd)
-{
-	uint tempval;
-	char tmpbuf[MAC_ADDR_LEN];
-	int i;
-	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	volatile tsec_t *regs = priv->regs;
-
-	/* Make sure the controller is stopped */
-	tsec_halt(dev);
-
-	/* Init MACCFG2.  Defaults to GMII */
-	regs->maccfg2 = MACCFG2_INIT_SETTINGS;
-
-	/* Init ECNTRL */
-	regs->ecntrl = ECNTRL_INIT_SETTINGS;
-
-	/* Copy the station address into the address registers.
-	 * Backwards, because little endian MACS are dumb */
-	for(i=0;i<MAC_ADDR_LEN;i++) {
-		tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
-	}
-	(uint)(regs->macstnaddr1) = *((uint *)(tmpbuf));
-
-	tempval = *((uint *)(tmpbuf +4));
-
-	(uint)(regs->macstnaddr2) = tempval;
-
-	/* reset the indices to zero */
-	rxIdx = 0;
-	txIdx = 0;
-
-	/* Clear out (for the most part) the other registers */
-	init_registers(regs);
-
-	/* Ready the device for tx/rx */
-	startup_tsec(dev);
-
-	/* If there's no link, fail */
-	return priv->link;
-
-}
-
-
-/* Write value to the device's PHY through the registers
- * specified in priv, modifying the register specified in regnum.
- * It will wait for the write to be done (or for a timeout to
- * expire) before exiting
- */
-void write_phy_reg(struct tsec_private *priv, uint regnum, uint value)
-{
-	volatile tsec_t *regbase = priv->phyregs;
-	uint phyid = priv->phyaddr;
-	int timeout=1000000;
-
-	regbase->miimadd = (phyid << 8) | regnum;
-	regbase->miimcon = value;
-	asm("msync");
-
-	timeout=1000000;
-	while((regbase->miimind & MIIMIND_BUSY) && timeout--);
-}
-
-
-/* Reads register regnum on the device's PHY through the
- * registers specified in priv.	 It lowers and raises the read
- * command, and waits for the data to become valid (miimind
- * notvalid bit cleared), and the bus to cease activity (miimind
- * busy bit cleared), and then returns the value
- */
-uint read_phy_reg(struct tsec_private *priv, uint regnum)
-{
-	uint value;
-	volatile tsec_t *regbase = priv->phyregs;
-	uint phyid = priv->phyaddr;
-
-	/* Put the address of the phy, and the register
-	 * number into MIIMADD */
-	regbase->miimadd = (phyid << 8) | regnum;
-
-	/* Clear the command register, and wait */
-	regbase->miimcom = 0;
-	asm("msync");
-
-	/* Initiate a read command, and wait */
-	regbase->miimcom = MIIM_READ_COMMAND;
-	asm("msync");
-
-	/* Wait for the the indication that the read is done */
-	while((regbase->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY)));
-
-	/* Grab the value read from the PHY */
-	value = regbase->miimstat;
-
-	return value;
-}
-
-
-/* Discover which PHY is attached to the device, and configure it
- * properly.  If the PHY is not recognized, then return 0
- * (failure).  Otherwise, return 1
- */
-static int init_phy(struct eth_device *dev)
-{
-	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	struct phy_info *curphy;
-
-	/* Assign a Physical address to the TBI */
-
-	{
-		volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
-		regs->tbipa = TBIPA_VALUE;
-		regs = (volatile tsec_t *)(TSEC_BASE_ADDR + TSEC_SIZE);
-		regs->tbipa = TBIPA_VALUE;
-		asm("msync");
-	}
-
-	/* Reset MII (due to new addresses) */
-	priv->phyregs->miimcfg = MIIMCFG_RESET;
-	asm("msync");
-	priv->phyregs->miimcfg = MIIMCFG_INIT_VALUE;
-	asm("msync");
-	while(priv->phyregs->miimind & MIIMIND_BUSY);
-
-	if(0 == relocated)
-		relocate_cmds();
-
-	/* Get the cmd structure corresponding to the attached
-	 * PHY */
-	curphy = get_phy_info(dev);
-
-	if(NULL == curphy) {
-		printf("%s: No PHY found\n", dev->name);
-
-		return 0;
-	}
-
-	priv->phyinfo = curphy;
-
-	phy_run_commands(priv, priv->phyinfo->config);
-
-	return 1;
-}
-
-
-/* Returns which value to write to the control register. */
-/* For 10/100, the value is slightly different */
-uint mii_cr_init(uint mii_reg, struct tsec_private *priv)
-{
-	if(priv->flags & TSEC_GIGABIT)
-		return MIIM_CONTROL_INIT;
-	else
-		return MIIM_CR_INIT;
-}
-
-
-/* Parse the status register for link, and then do
- * auto-negotiation */
-uint mii_parse_sr(uint mii_reg, struct tsec_private *priv)
-{
-	uint timeout = TSEC_TIMEOUT;
-
-	if(mii_reg & MIIM_STATUS_LINK)
-		priv->link = 1;
-	else
-		priv->link = 0;
-
-	if(priv->link) {
-		while((!(mii_reg & MIIM_STATUS_AN_DONE)) && timeout--)
-			mii_reg = read_phy_reg(priv, MIIM_STATUS);
-	}
-
-	return 0;
-}
-
-
-/* Parse the 88E1011's status register for speed and duplex
- * information */
-uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private *priv)
-{
-	uint speed;
-
-	if(mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
-		priv->duplexity = 1;
-	else
-		priv->duplexity = 0;
-
-	speed = (mii_reg &MIIM_88E1011_PHYSTAT_SPEED);
-
-	switch(speed) {
-		case MIIM_88E1011_PHYSTAT_GBIT:
-			priv->speed = 1000;
-			break;
-		case MIIM_88E1011_PHYSTAT_100:
-			priv->speed = 100;
-			break;
-		default:
-			priv->speed = 10;
-	}
-
-	return 0;
-}
-
-
-/* Parse the cis8201's status register for speed and duplex
- * information */
-uint mii_parse_cis8201(uint mii_reg, struct tsec_private *priv)
-{
-	uint speed;
-
-	if(mii_reg & MIIM_CIS8201_AUXCONSTAT_DUPLEX)
-		priv->duplexity = 1;
-	else
-		priv->duplexity = 0;
-
-	speed = mii_reg & MIIM_CIS8201_AUXCONSTAT_SPEED;
-	switch(speed) {
-		case MIIM_CIS8201_AUXCONSTAT_GBIT:
-			priv->speed = 1000;
-			break;
-		case MIIM_CIS8201_AUXCONSTAT_100:
-			priv->speed = 100;
-			break;
-		default:
-			priv->speed = 10;
-			break;
-	}
-
-	return 0;
-}
-
-
-/* Parse the DM9161's status register for speed and duplex
- * information */
-uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private *priv)
-{
-	if(mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
-		priv->speed = 100;
-	else
-		priv->speed = 10;
-
-	if(mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
-		priv->duplexity = 1;
-	else
-		priv->duplexity = 0;
-
-	return 0;
-}
-
-
-/* Hack to write all 4 PHYs with the LED values */
-uint mii_cis8204_fixled(uint mii_reg, struct tsec_private *priv)
-{
-	uint phyid;
-	volatile tsec_t *regbase = priv->phyregs;
-	int timeout=1000000;
-
-	for(phyid=0;phyid<4;phyid++) {
-		regbase->miimadd = (phyid << 8) | mii_reg;
-		regbase->miimcon = MIIM_CIS8204_SLEDCON_INIT;
-		asm("msync");
-
-		timeout=1000000;
-		while((regbase->miimind & MIIMIND_BUSY) && timeout--);
-	}
-
-	return MIIM_CIS8204_SLEDCON_INIT;
-}
-
-uint mii_cis8204_setmode(uint mii_reg, struct tsec_private *priv)
-{
-	if (priv->flags & TSEC_REDUCED)
-		return MIIM_CIS8204_EPHYCON_INIT | MIIM_CIS8204_EPHYCON_RGMII;
-	else
-		return MIIM_CIS8204_EPHYCON_INIT;
-}
-
-/* Initialized required registers to appropriate values, zeroing
- * those we don't care about (unless zero is bad, in which case,
- * choose a more appropriate value) */
-static void init_registers(volatile tsec_t *regs)
-{
-	/* Clear IEVENT */
-	regs->ievent = IEVENT_INIT_CLEAR;
-
-	regs->imask = IMASK_INIT_CLEAR;
-
-	regs->hash.iaddr0 = 0;
-	regs->hash.iaddr1 = 0;
-	regs->hash.iaddr2 = 0;
-	regs->hash.iaddr3 = 0;
-	regs->hash.iaddr4 = 0;
-	regs->hash.iaddr5 = 0;
-	regs->hash.iaddr6 = 0;
-	regs->hash.iaddr7 = 0;
-
-	regs->hash.gaddr0 = 0;
-	regs->hash.gaddr1 = 0;
-	regs->hash.gaddr2 = 0;
-	regs->hash.gaddr3 = 0;
-	regs->hash.gaddr4 = 0;
-	regs->hash.gaddr5 = 0;
-	regs->hash.gaddr6 = 0;
-	regs->hash.gaddr7 = 0;
-
-	regs->rctrl = 0x00000000;
-
-	/* Init RMON mib registers */
-	memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t));
-
-	regs->rmon.cam1 = 0xffffffff;
-	regs->rmon.cam2 = 0xffffffff;
-
-	regs->mrblr = MRBLR_INIT_SETTINGS;
-
-	regs->minflr = MINFLR_INIT_SETTINGS;
-
-	regs->attr = ATTR_INIT_SETTINGS;
-	regs->attreli = ATTRELI_INIT_SETTINGS;
-
-}
-
-
-/* Configure maccfg2 based on negotiated speed and duplex
- * reported by PHY handling code */
-static void adjust_link(struct eth_device *dev)
-{
-	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	volatile tsec_t *regs = priv->regs;
-
-	if(priv->link) {
-		if(priv->duplexity != 0)
-			regs->maccfg2 |= MACCFG2_FULL_DUPLEX;
-		else
-			regs->maccfg2 &= ~(MACCFG2_FULL_DUPLEX);
-
-		switch(priv->speed) {
-			case 1000:
-				regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF))
-					| MACCFG2_GMII);
-				break;
-			case 100:
-			case 10:
-				regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF))
-					| MACCFG2_MII);
-
-				/* If We're in reduced mode, we
-				 * need to say whether we're 10
-				 * or 100 MB. */
-				if ((priv->speed == 100) 
-						&& (priv->flags & TSEC_REDUCED))
-					regs->ecntrl |= ECNTRL_R100;
-				else
-					regs->ecntrl &= ~(ECNTRL_R100);
-				break;
-			default:
-				printf("%s: Speed was bad\n", dev->name);
-				break;
-		}
-
-		printf("Speed: %d, %s duplex\n", priv->speed,
-				(priv->duplexity) ? "full" : "half");
-
-	} else {
-		printf("%s: No link.\n", dev->name);
-	}
-}
-
-
-/* Set up the buffers and their descriptors, and bring up the
- * interface */
-static void startup_tsec(struct eth_device *dev)
-{
-	int i;
-	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	volatile tsec_t *regs = priv->regs;
-
-	/* Point to the buffer descriptors */
-	regs->tbase = (unsigned int)(&rtx.txbd[txIdx]);
-	regs->rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
-
-	/* Initialize the Rx Buffer descriptors */
-	for (i = 0; i < PKTBUFSRX; i++) {
-		rtx.rxbd[i].status = RXBD_EMPTY;
-		rtx.rxbd[i].length = 0;
-		rtx.rxbd[i].bufPtr = (uint)NetRxPackets[i];
-	}
-	rtx.rxbd[PKTBUFSRX -1].status |= RXBD_WRAP;
-
-	/* Initialize the TX Buffer Descriptors */
-	for(i=0; i<TX_BUF_CNT; i++) {
-		rtx.txbd[i].status = 0;
-		rtx.txbd[i].length = 0;
-		rtx.txbd[i].bufPtr = 0;
-	}
-	rtx.txbd[TX_BUF_CNT -1].status |= TXBD_WRAP;
-
-	/* Start up the PHY */
-	phy_run_commands(priv, priv->phyinfo->startup);
-	adjust_link(dev);
-
-	/* Enable Transmit and Receive */
-	regs->maccfg1 |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
-
-	/* Tell the DMA it is clear to go */
-	regs->dmactrl |= DMACTRL_INIT_SETTINGS;
-	regs->tstat = TSTAT_CLEAR_THALT;
-	regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
-}
-
-/* This returns the status bits of the device.	The return value
- * is never checked, and this is what the 8260 driver did, so we
- * do the same.	 Presumably, this would be zero if there were no
- * errors */
-static int tsec_send(struct eth_device* dev, volatile void *packet, int length)
-{
-	int i;
-	int result = 0;
-	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	volatile tsec_t *regs = priv->regs;
-
-	/* Find an empty buffer descriptor */
-	for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
-		if (i >= TOUT_LOOP) {
-			debug ("%s: tsec: tx buffers full\n", dev->name);
-			return result;
-		}
-	}
-
-	rtx.txbd[txIdx].bufPtr = (uint)packet;
-	rtx.txbd[txIdx].length = length;
-	rtx.txbd[txIdx].status |= (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
-
-	/* Tell the DMA to go */
-	regs->tstat = TSTAT_CLEAR_THALT;
-
-	/* Wait for buffer to be transmitted */
-	for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
-		if (i >= TOUT_LOOP) {
-			debug ("%s: tsec: tx error\n", dev->name);
-			return result;
-		}
-	}
-
-	txIdx = (txIdx + 1) % TX_BUF_CNT;
-	result = rtx.txbd[txIdx].status & TXBD_STATS;
-
-	return result;
-}
-
-static int tsec_recv(struct eth_device* dev)
-{
-	int length;
-	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	volatile tsec_t *regs = priv->regs;
-
-	while(!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
-
-		length = rtx.rxbd[rxIdx].length;
-
-		/* Send the packet up if there were no errors */
-		if (!(rtx.rxbd[rxIdx].status & RXBD_STATS)) {
-			NetReceive(NetRxPackets[rxIdx], length - 4);
-		} else {
-			printf("Got error %x\n",
-					(rtx.rxbd[rxIdx].status & RXBD_STATS));
-		}
-
-		rtx.rxbd[rxIdx].length = 0;
-
-		/* Set the wrap bit if this is the last element in the list */
-		rtx.rxbd[rxIdx].status = RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
-
-		rxIdx = (rxIdx + 1) % PKTBUFSRX;
-	}
-
-	if(regs->ievent&IEVENT_BSY) {
-		regs->ievent = IEVENT_BSY;
-		regs->rstat = RSTAT_CLEAR_RHALT;
-	}
-
-	return -1;
-
-}
-
-
-/* Stop the interface */
-static void tsec_halt(struct eth_device* dev)
-{
-	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	volatile tsec_t *regs = priv->regs;
-
-	regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
-	regs->dmactrl |= (DMACTRL_GRS | DMACTRL_GTS);
-
-	while(!(regs->ievent & (IEVENT_GRSC | IEVENT_GTSC)));
-
-	regs->maccfg1 &= ~(MACCFG1_TX_EN | MACCFG1_RX_EN);
-
-	/* Shut down the PHY, as needed */
-	phy_run_commands(priv, priv->phyinfo->shutdown);
-}
-
-
-struct phy_info phy_info_M88E1011S = {
-	0x01410c6,
-	"Marvell 88E1011S",
-	4,
-	(struct phy_cmd[]) { /* config */
-		/* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{0x1d, 0x1f, NULL},
-		{0x1e, 0x200c, NULL},
-		{0x1d, 0x5, NULL},
-		{0x1e, 0x0, NULL},
-		{0x1e, 0x100, NULL},
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
-};
-
-struct phy_info phy_info_M88E1111S = {
-	0x01410cc,
-	"Marvell 88E1111S",
-	4,
-	(struct phy_cmd[]) { /* config */
-	  /* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{0x1d, 0x1f, NULL},
-		{0x1e, 0x200c, NULL},
-		{0x1d, 0x5, NULL},
-		{0x1e, 0x0, NULL},
-		{0x1e, 0x100, NULL},
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-	  /* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
-};
-
-struct phy_info phy_info_cis8204 = {
-	0x3f11,
-	"Cicada Cis8204",
-	6,
-	(struct phy_cmd[]) { /* config */
-		/* Override PHY config settings */
-		{MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT, &mii_cis8204_fixled},
-		{MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT, &mii_cis8204_setmode},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Read the Status (2x to make sure link is right) */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
-};
-
-/* Cicada 8201 */
-struct phy_info phy_info_cis8201 = {
-	0xfc41,
-	"CIS8201",
-	4,
-	(struct phy_cmd[]) { /* config */
-		/* Override PHY config settings */
-		{MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
-		/* Set up the interface mode */
-		{MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Read the Status (2x to make sure link is right) */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
-};
-
-
-struct phy_info phy_info_dm9161 = {
-	0x0181b88,
-	"Davicom DM9161E",
-	4,
-	(struct phy_cmd[]) { /* config */
-		{MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
-		/* Do not bypass the scrambler/descrambler */
-		{MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
-		/* Clear 10BTCSR to default */
-		{MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT, NULL},
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CR_INIT, NULL},
-		/* Restart Auto Negotiation */
-		{MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_DM9161_SCSR, miim_read, &mii_parse_dm9161_scsr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
-};
-
-uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
-{
-	unsigned int speed;
-	if (priv->link) {
-		speed = mii_reg & MIIM_LXT971_SR2_SPEED_MASK;
-
-		switch (speed) {
-		case MIIM_LXT971_SR2_10HDX:
-			priv->speed = 10;
-			priv->duplexity = 0;
-			break;
-		case MIIM_LXT971_SR2_10FDX:
-			priv->speed = 10;
-			priv->duplexity = 1;
-			break;
-		case MIIM_LXT971_SR2_100HDX:
-			priv->speed = 100;
-			priv->duplexity = 0;
-		default:
-			priv->speed = 100;
-			priv->duplexity = 1;
-			break;
-		}
-	} else {
-		priv->speed = 0;
-		priv->duplexity = 0;
-	}
-
-	return 0;
-}
-
-static struct phy_info phy_info_lxt971 = {
-	0x0001378e,
-	"LXT971",
-	4,
-	(struct phy_cmd []) {  /* config */
-		{ MIIM_CR, MIIM_CR_INIT, mii_cr_init }, /* autonegotiate */
-		{ miim_end, }
-	},
-	(struct phy_cmd []) {  /* startup - enable interrupts */
-		/* { 0x12, 0x00f2, NULL }, */
-		{ MIIM_STATUS, miim_read, NULL },
-		{ MIIM_STATUS, miim_read, &mii_parse_sr },
-		{ MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2 },
-		{ miim_end, }
-	},
-	(struct phy_cmd []) {  /* shutdown - disable interrupts */
-		{ miim_end, }
-	},
-};
-
-struct phy_info *phy_info[] = {
-#if 0
-	&phy_info_cis8201,
-#endif
-	&phy_info_cis8204,
-	&phy_info_M88E1011S,
-	&phy_info_M88E1111S,
-	&phy_info_dm9161,
-	&phy_info_lxt971,
-	NULL
-};
-
-
-/* Grab the identifier of the device's PHY, and search through
- * all of the known PHYs to see if one matches.	 If so, return
- * it, if not, return NULL */
-struct phy_info * get_phy_info(struct eth_device *dev)
-{
-	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	uint phy_reg, phy_ID;
-	int i;
-	struct phy_info *theInfo = NULL;
-
-	/* Grab the bits from PHYIR1, and put them in the upper half */
-	phy_reg = read_phy_reg(priv, MIIM_PHYIR1);
-	phy_ID = (phy_reg & 0xffff) << 16;
-
-	/* Grab the bits from PHYIR2, and put them in the lower half */
-	phy_reg = read_phy_reg(priv, MIIM_PHYIR2);
-	phy_ID |= (phy_reg & 0xffff);
-
-	/* loop through all the known PHY types, and find one that */
-	/* matches the ID we read from the PHY. */
-	for(i=0; phy_info[i]; i++) {
-		if(phy_info[i]->id == (phy_ID >> phy_info[i]->shift))
-			theInfo = phy_info[i];
-	}
-
-	if(theInfo == NULL)
-	{
-		printf("%s: PHY id %x is not supported!\n", dev->name, phy_ID);
-		return NULL;
-	} else {
-		printf("%s: PHY is %s (%x)\n", dev->name, theInfo->name,
-				phy_ID);
-	}
-
-	return theInfo;
-}
-
-
-/* Execute the given series of commands on the given device's
- * PHY, running functions as necessary*/
-void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
-{
-	int i;
-	uint result;
-	volatile tsec_t *phyregs = priv->phyregs;
-
-	phyregs->miimcfg = MIIMCFG_RESET;
-
-	phyregs->miimcfg = MIIMCFG_INIT_VALUE;
-
-	while(phyregs->miimind & MIIMIND_BUSY);
-
-	for(i=0;cmd->mii_reg != miim_end;i++) {
-		if(cmd->mii_data == miim_read) {
-			result = read_phy_reg(priv, cmd->mii_reg);
-
-			if(cmd->funct != NULL)
-				(*(cmd->funct))(result, priv);
-
-		} else {
-			if(cmd->funct != NULL)
-				result = (*(cmd->funct))(cmd->mii_reg, priv);
-			else
-				result = cmd->mii_data;
-
-			write_phy_reg(priv, cmd->mii_reg, result);
-
-		}
-		cmd++;
-	}
-}
-
-
-/* Relocate the function pointers in the phy cmd lists */
-static void relocate_cmds(void)
-{
-	struct phy_cmd **cmdlistptr;
-	struct phy_cmd *cmd;
-	int i,j,k;
-	DECLARE_GLOBAL_DATA_PTR;
-
-	for(i=0; phy_info[i]; i++) {
-		/* First thing's first: relocate the pointers to the
-		 * PHY command structures (the structs were done) */
-		phy_info[i] = (struct phy_info *) ((uint)phy_info[i]
-				+ gd->reloc_off);
-		phy_info[i]->name += gd->reloc_off;
-		phy_info[i]->config =
-			(struct phy_cmd *)((uint)phy_info[i]->config
-					   + gd->reloc_off);
-		phy_info[i]->startup =
-			(struct phy_cmd *)((uint)phy_info[i]->startup
-					   + gd->reloc_off);
-		phy_info[i]->shutdown =
-			(struct phy_cmd *)((uint)phy_info[i]->shutdown
-					   + gd->reloc_off);
-
-		cmdlistptr = &phy_info[i]->config;
-		j=0;
-		for(;cmdlistptr <= &phy_info[i]->shutdown;cmdlistptr++) {
-			k=0;
-			for(cmd=*cmdlistptr;cmd->mii_reg != miim_end;cmd++) {
-				/* Only relocate non-NULL pointers */
-				if(cmd->funct)
-					cmd->funct += gd->reloc_off;
-
-				k++;
-			}
-			j++;
-		}
-	}
-
-	relocated = 1;
-}
-
-
-#ifndef CONFIG_BITBANGMII
-
-struct tsec_private * get_priv_for_phy(unsigned char phyaddr)
-{
-	int i;
-
-	for(i=0;i<MAXCONTROLLERS;i++) {
-		if(privlist[i]->phyaddr == phyaddr)
-			return privlist[i];
-	}
-
-	return NULL;
-}
-
-/*
- * Read a MII PHY register.
- *
- * Returns:
- *  0 on success
- */
-int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
-{
-	unsigned short ret;
-	struct tsec_private *priv = get_priv_for_phy(addr);
-
-	if(NULL == priv) {
-		printf("Can't read PHY at address %d\n", addr);
-		return -1;
-	}
-
-	ret = (unsigned short)read_phy_reg(priv, reg);
-	*value = ret;
-
-	return 0;
-}
-
-/*
- * Write a MII PHY register.
- *
- * Returns:
- *  0 on success
- */
-int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
-{
-	struct tsec_private *priv = get_priv_for_phy(addr);
-
-	if(NULL == priv) {
-		printf("Can't write PHY at address %d\n", addr);
-		return -1;
-	}
-
-	write_phy_reg(priv, reg, value);
-
-	return 0;
-}
-
-#endif /* CONFIG_BITBANGMII */
-
-#endif /* CONFIG_TSEC_ENET */
diff --git a/cpu/mpc85xx/tsec.h b/cpu/mpc85xx/tsec.h
deleted file mode 100644
index d1c70aa..0000000
--- a/cpu/mpc85xx/tsec.h
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- *  tsec.h
- *
- *  Driver for the Motorola Triple Speed Ethernet Controller
- *
- *  This software may be used and distributed according to the
- *  terms of the GNU Public License, Version 2, incorporated
- *  herein by reference.
- *
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2003, Motorola, Inc.
- * maintained by Xianghua Xiao (x.xiao@motorola.com)
- * author Andy Fleming
- *
- */
-
-#ifndef __TSEC_H
-#define __TSEC_H
-
-#include <net.h>
-#include <mpc85xx.h>
-
-#define TSEC_BASE_ADDR	(CFG_IMMR + 0x24000)
-#define TSEC_SIZE	0x01000
-
-#define MAC_ADDR_LEN 6
-
-/* #define TSEC_TIMEOUT 	1000000 */
-#define TSEC_TIMEOUT 1000
-#define TOUT_LOOP 	1000000
-
-/* MAC register bits */
-#define MACCFG1_SOFT_RESET	0x80000000
-#define MACCFG1_RESET_RX_MC	0x00080000
-#define MACCFG1_RESET_TX_MC	0x00040000
-#define MACCFG1_RESET_RX_FUN	0x00020000
-#define	MACCFG1_RESET_TX_FUN	0x00010000
-#define MACCFG1_LOOPBACK	0x00000100
-#define MACCFG1_RX_FLOW		0x00000020
-#define MACCFG1_TX_FLOW		0x00000010
-#define MACCFG1_SYNCD_RX_EN	0x00000008
-#define MACCFG1_RX_EN		0x00000004
-#define MACCFG1_SYNCD_TX_EN	0x00000002
-#define MACCFG1_TX_EN		0x00000001
-
-#define MACCFG2_INIT_SETTINGS	0x00007205
-#define MACCFG2_FULL_DUPLEX	0x00000001
-#define MACCFG2_IF              0x00000300
-#define MACCFG2_GMII		0x00000200
-#define MACCFG2_MII             0x00000100
-
-#define ECNTRL_INIT_SETTINGS	0x00001000
-#define ECNTRL_TBI_MODE         0x00000020
-#define ECNTRL_R100		0x00000008
-
-#define miim_end -2
-#define miim_read -1
-
-#define TBIPA_VALUE		0x1f
-#define MIIMCFG_INIT_VALUE	0x00000003
-#define MIIMCFG_RESET		0x80000000
-
-#define MIIMIND_BUSY            0x00000001
-#define MIIMIND_NOTVALID        0x00000004
-
-#define MIIM_CONTROL            0x00
-#define MIIM_CONTROL_RESET	0x00009140
-#define MIIM_CONTROL_INIT       0x00001140
-#define MIIM_ANEN               0x00001000
-
-#define MIIM_CR                 0x00
-#define MIIM_CR_RST		0x00008000
-#define MIIM_CR_INIT	        0x00001000
-
-#define MIIM_STATUS		0x1
-#define MIIM_STATUS_AN_DONE 	0x00000020
-#define MIIM_STATUS_LINK	0x0004
-
-#define MIIM_PHYIR1		0x2
-#define MIIM_PHYIR2		0x3
-
-#define MIIM_ANAR		0x4
-#define MIIM_ANAR_INIT		0x1e1
-
-#define MIIM_TBI_ANLPBPA	0x5
-#define MIIM_TBI_ANLPBPA_HALF	0x00000040
-#define MIIM_TBI_ANLPBPA_FULL	0x00000020
-
-#define MIIM_TBI_ANEX		0x6
-#define MIIM_TBI_ANEX_NP	0x00000004
-#define MIIM_TBI_ANEX_PRX	0x00000002
-
-#define MIIM_GBIT_CONTROL	0x9
-#define MIIM_GBIT_CONTROL_INIT	0xe00
-
-/* Cicada Auxiliary Control/Status Register */
-#define MIIM_CIS8201_AUX_CONSTAT        0x1c
-#define MIIM_CIS8201_AUXCONSTAT_INIT    0x0004
-#define MIIM_CIS8201_AUXCONSTAT_DUPLEX  0x0020
-#define MIIM_CIS8201_AUXCONSTAT_SPEED   0x0018
-#define MIIM_CIS8201_AUXCONSTAT_GBIT    0x0010
-#define MIIM_CIS8201_AUXCONSTAT_100     0x0008
-
-/* Cicada Extended Control Register 1 */
-#define MIIM_CIS8201_EXT_CON1           0x17
-#define MIIM_CIS8201_EXTCON1_INIT       0x0000
-
-/* Cicada 8204 Extended PHY Control Register 1 */
-#define MIIM_CIS8204_EPHY_CON		0x17
-#define MIIM_CIS8204_EPHYCON_INIT	0x0006
-#define MIIM_CIS8204_EPHYCON_RGMII	0x1000
-
-/* Cicada 8204 Serial LED Control Register */
-#define MIIM_CIS8204_SLED_CON		0x1b
-#define MIIM_CIS8204_SLEDCON_INIT	0x1115
-
-#define MIIM_GBIT_CON		0x09
-#define MIIM_GBIT_CON_ADVERT	0x0e00
-
-/* 88E1011 PHY Status Register */
-#define MIIM_88E1011_PHY_STATUS         0x11
-#define MIIM_88E1011_PHYSTAT_SPEED      0xc000
-#define MIIM_88E1011_PHYSTAT_GBIT       0x8000
-#define MIIM_88E1011_PHYSTAT_100        0x4000
-#define MIIM_88E1011_PHYSTAT_DUPLEX     0x2000
-#define MIIM_88E1011_PHYSTAT_SPDDONE	0x0800
-#define MIIM_88E1011_PHYSTAT_LINK	0x0400
-
-/* DM9161 Control register values */
-#define MIIM_DM9161_CR_STOP	0x0400
-#define MIIM_DM9161_CR_RSTAN	0x1200
-
-#define MIIM_DM9161_SCR		0x10
-#define MIIM_DM9161_SCR_INIT	0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MIIM_DM9161_SCSR	0x11
-#define MIIM_DM9161_SCSR_100F	0x8000
-#define MIIM_DM9161_SCSR_100H	0x4000
-#define MIIM_DM9161_SCSR_10F	0x2000
-#define MIIM_DM9161_SCSR_10H	0x1000
-
-/* DM9161 10BT Configuration/Status */
-#define MIIM_DM9161_10BTCSR	0x12
-#define MIIM_DM9161_10BTCSR_INIT	0x7800
-
-/* LXT971 Status 2 registers */
-#define MIIM_LXT971_SR2       	17  /* Status Register 2  */
-#define MIIM_LXT971_SR2_SPEED_MASK	0xf000
-#define MIIM_LXT971_SR2_10HDX	0x1000  /* 10 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_10FDX	0x2000  /* 10 Mbit full duplex selected */
-#define MIIM_LXT971_SR2_100HDX	0x4000  /* 100 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_100FDX	0x8000  /* 100 Mbit full duplex selected */
-
-#define MIIM_READ_COMMAND       0x00000001
-
-#define MRBLR_INIT_SETTINGS	PKTSIZE_ALIGN
-
-#define MINFLR_INIT_SETTINGS	0x00000040
-
-#define DMACTRL_INIT_SETTINGS   0x000000c3
-#define DMACTRL_GRS             0x00000010
-#define DMACTRL_GTS             0x00000008
-
-#define TSTAT_CLEAR_THALT       0x80000000
-#define RSTAT_CLEAR_RHALT       0x00800000
-
-
-#define IEVENT_INIT_CLEAR	0xffffffff
-#define IEVENT_BABR		0x80000000
-#define IEVENT_RXC		0x40000000
-#define IEVENT_BSY		0x20000000
-#define IEVENT_EBERR		0x10000000
-#define IEVENT_MSRO		0x04000000
-#define IEVENT_GTSC		0x02000000
-#define IEVENT_BABT		0x01000000
-#define IEVENT_TXC		0x00800000
-#define IEVENT_TXE		0x00400000
-#define IEVENT_TXB		0x00200000
-#define IEVENT_TXF		0x00100000
-#define IEVENT_IE		0x00080000
-#define IEVENT_LC		0x00040000
-#define IEVENT_CRL		0x00020000
-#define IEVENT_XFUN		0x00010000
-#define IEVENT_RXB0		0x00008000
-#define IEVENT_GRSC		0x00000100
-#define IEVENT_RXF0		0x00000080
-
-#define IMASK_INIT_CLEAR	0x00000000
-#define IMASK_TXEEN		0x00400000
-#define IMASK_TXBEN		0x00200000
-#define IMASK_TXFEN             0x00100000
-#define IMASK_RXFEN0		0x00000080
-
-
-/* Default Attribute fields */
-#define ATTR_INIT_SETTINGS     0x000000c0
-#define ATTRELI_INIT_SETTINGS  0x00000000
-
-
-/* TxBD status field bits */
-#define TXBD_READY		0x8000
-#define TXBD_PADCRC		0x4000
-#define TXBD_WRAP		0x2000
-#define TXBD_INTERRUPT		0x1000
-#define TXBD_LAST		0x0800
-#define TXBD_CRC		0x0400
-#define TXBD_DEF		0x0200
-#define TXBD_HUGEFRAME		0x0080
-#define TXBD_LATECOLLISION	0x0080
-#define TXBD_RETRYLIMIT		0x0040
-#define	TXBD_RETRYCOUNTMASK	0x003c
-#define TXBD_UNDERRUN		0x0002
-#define TXBD_STATS              0x03ff
-
-/* RxBD status field bits */
-#define RXBD_EMPTY		0x8000
-#define RXBD_RO1		0x4000
-#define RXBD_WRAP		0x2000
-#define RXBD_INTERRUPT		0x1000
-#define RXBD_LAST		0x0800
-#define RXBD_FIRST		0x0400
-#define RXBD_MISS		0x0100
-#define RXBD_BROADCAST		0x0080
-#define RXBD_MULTICAST		0x0040
-#define RXBD_LARGE		0x0020
-#define RXBD_NONOCTET		0x0010
-#define RXBD_SHORT		0x0008
-#define RXBD_CRCERR		0x0004
-#define RXBD_OVERRUN		0x0002
-#define RXBD_TRUNCATED		0x0001
-#define RXBD_STATS		0x003f
-
-typedef struct txbd8
-{
-	ushort       status;         /* Status Fields */
-	ushort       length;         /* Buffer length */
-	uint         bufPtr;         /* Buffer Pointer */
-} txbd8_t;
-
-typedef struct rxbd8
-{
-	ushort       status;         /* Status Fields */
-	ushort       length;         /* Buffer Length */
-	uint         bufPtr;         /* Buffer Pointer */
-} rxbd8_t;
-
-typedef struct rmon_mib
-{
-	/* Transmit and Receive Counters */
-	uint	tr64;		/* Transmit and Receive 64-byte Frame Counter */
-	uint	tr127;		/* Transmit and Receive 65-127 byte Frame Counter */
-	uint	tr255;		/* Transmit and Receive 128-255 byte Frame Counter */
-	uint	tr511;		/* Transmit and Receive 256-511 byte Frame Counter */
-	uint	tr1k;		/* Transmit and Receive 512-1023 byte Frame Counter */
-	uint	trmax;		/* Transmit and Receive 1024-1518 byte Frame Counter */
-	uint	trmgv;		/* Transmit and Receive 1519-1522 byte Good VLAN Frame */
-	/* Receive Counters */
-	uint	rbyt;		/* Receive Byte Counter */
-	uint	rpkt;		/* Receive Packet Counter */
-	uint	rfcs;		/* Receive FCS Error Counter */
-	uint	rmca;		/* Receive Multicast Packet (Counter) */
-	uint	rbca;		/* Receive Broadcast Packet */
-	uint	rxcf;		/* Receive Control Frame Packet */
-	uint	rxpf;		/* Receive Pause Frame Packet */
-	uint	rxuo;		/* Receive Unknown OP Code */
-	uint	raln;		/* Receive Alignment Error */
-	uint	rflr;		/* Receive Frame Length Error */
-	uint	rcde;		/* Receive Code Error */
-	uint	rcse;		/* Receive Carrier Sense Error */
-	uint	rund;		/* Receive Undersize Packet */
-	uint	rovr;		/* Receive Oversize Packet */
-	uint	rfrg;		/* Receive Fragments */
-	uint	rjbr;		/* Receive Jabber */
-	uint	rdrp;		/* Receive Drop */
-	/* Transmit Counters */
-	uint	tbyt;		/* Transmit Byte Counter */
-	uint	tpkt;		/* Transmit Packet */
-	uint	tmca;		/* Transmit Multicast Packet */
-	uint	tbca;		/* Transmit Broadcast Packet */
-	uint	txpf;		/* Transmit Pause Control Frame */
-	uint	tdfr;		/* Transmit Deferral Packet */
-	uint	tedf;		/* Transmit Excessive Deferral Packet */
-	uint	tscl;		/* Transmit Single Collision Packet */
-	/* (0x2_n700) */
-	uint	tmcl;		/* Transmit Multiple Collision Packet */
-	uint	tlcl;		/* Transmit Late Collision Packet */
-	uint	txcl;		/* Transmit Excessive Collision Packet */
-	uint	tncl;		/* Transmit Total Collision */
-
-	uint	res2;
-
-	uint	tdrp;		/* Transmit Drop Frame */
-	uint	tjbr;		/* Transmit Jabber Frame */
-	uint	tfcs;		/* Transmit FCS Error */
-	uint	txcf;		/* Transmit Control Frame */
-	uint	tovr;		/* Transmit Oversize Frame */
-	uint	tund;		/* Transmit Undersize Frame */
-	uint	tfrg;		/* Transmit Fragments Frame */
-	/* General Registers */
-	uint	car1;		/* Carry Register One */
-	uint	car2;		/* Carry Register Two */
-	uint	cam1;		/* Carry Register One Mask */
-	uint	cam2;		/* Carry Register Two Mask */
-} rmon_mib_t;
-
-typedef struct tsec_hash_regs
-{
-	uint	iaddr0;		/* Individual Address Register 0 */
-	uint	iaddr1;		/* Individual Address Register 1 */
-	uint	iaddr2;		/* Individual Address Register 2 */
-	uint	iaddr3;		/* Individual Address Register 3 */
-	uint	iaddr4;		/* Individual Address Register 4 */
-	uint	iaddr5;		/* Individual Address Register 5 */
-	uint	iaddr6;		/* Individual Address Register 6 */
-	uint	iaddr7;		/* Individual Address Register 7 */
-	uint	res1[24];
-	uint	gaddr0;		/* Group Address Register 0 */
-	uint	gaddr1;		/* Group Address Register 1 */
-	uint	gaddr2;		/* Group Address Register 2 */
-	uint	gaddr3;		/* Group Address Register 3 */
-	uint	gaddr4;		/* Group Address Register 4 */
-	uint	gaddr5;		/* Group Address Register 5 */
-	uint	gaddr6;		/* Group Address Register 6 */
-	uint	gaddr7;		/* Group Address Register 7 */
-	uint	res2[24];
-} tsec_hash_t;
-
-typedef struct tsec
-{
-	/* General Control and Status Registers (0x2_n000) */
-	uint	res000[4];
-
-	uint	ievent;		/* Interrupt Event */
-	uint	imask;		/* Interrupt Mask */
-	uint	edis;		/* Error Disabled */
-	uint	res01c;
-	uint	ecntrl;		/* Ethernet Control */
-	uint	minflr;		/* Minimum Frame Length */
-	uint	ptv;		/* Pause Time Value */
-	uint	dmactrl;	/* DMA Control */
-	uint	tbipa;		/* TBI PHY Address */
-
-	uint	res034[3];
-	uint	res040[48];
-
-	/* Transmit Control and Status Registers (0x2_n100) */
-	uint	tctrl;		/* Transmit Control */
-	uint 	tstat;		/* Transmit Status */
-	uint	res108;
-	uint	tbdlen;		/* Tx BD Data Length */
-	uint	res110[5];
-	uint	ctbptr;	        /* Current TxBD Pointer */
-	uint	res128[23];
-	uint	tbptr;		/* TxBD Pointer */
-	uint	res188[30];
-	/* (0x2_n200) */
-	uint        res200;
-	uint	tbase;		/* TxBD Base Address */
-	uint	res208[42];
-	uint	ostbd;		/* Out of Sequence TxBD */
-	uint	ostbdp;		/* Out of Sequence Tx Data Buffer Pointer */
-	uint        res2b8[18];
-
-	/* Receive Control and Status Registers (0x2_n300) */
-	uint	rctrl;		/* Receive Control */
-	uint	rstat;		/* Receive Status */
-	uint	res308;
-	uint	rbdlen;		/* RxBD Data Length */
-	uint	res310[4];
-	uint        res320;
-	uint	crbptr; 	/* Current Receive Buffer Pointer */
-	uint	res328[6];
-	uint	mrblr;  	/* Maximum Receive Buffer Length */
-	uint	res344[16];
-	uint	rbptr;   	/* RxBD Pointer */
-	uint        res388[30];
-	/* (0x2_n400) */
-	uint        res400;
-	uint	rbase;  	/* RxBD Base Address */
-	uint        res408[62];
-
-	/* MAC Registers (0x2_n500) */
-	uint	maccfg1;	/* MAC Configuration #1 */
-	uint	maccfg2;	/* MAC Configuration #2 */
-	uint	ipgifg;		/* Inter Packet Gap/Inter Frame Gap */
-	uint	hafdup;		/* Half-duplex */
-	uint	maxfrm;		/* Maximum Frame */
-	uint	res514;
-	uint	res518;
-
-	uint	res51c;
-
-	uint	miimcfg;	/* MII Management: Configuration */
-	uint	miimcom;	/* MII Management: Command */
-	uint	miimadd;	/* MII Management: Address */
-	uint	miimcon;	/* MII Management: Control */
-	uint	miimstat;	/* MII Management: Status */
-	uint	miimind;	/* MII Management: Indicators */
-
-	uint	res538;
-
-	uint	ifstat;		/* Interface Status */
-	uint	macstnaddr1;	/* Station Address, part 1 */
-	uint	macstnaddr2;	/* Station Address, part 2 */
-	uint	res548[46];
-
-	/* (0x2_n600) */
-	uint	res600[32];
-
-	/* RMON MIB Registers (0x2_n680-0x2_n73c) */
-	rmon_mib_t	rmon;
-	uint	res740[48];
-
-	/* Hash Function Registers (0x2_n800) */
-	tsec_hash_t	hash;
-
-	uint        res900[128];
-
-	/* Pattern Registers (0x2_nb00) */
-	uint        resb00[62];
-	uint        attr;          /* Default Attribute Register */
-	uint        attreli;       /* Default Attribute Extract Length and Index */
-
-	/* TSEC Future Expansion Space (0x2_nc00-0x2_nffc) */
-	uint	resc00[256];
-} tsec_t;
-
-#define TSEC_GIGABIT (1)
-
-/* This flag currently only has
- * meaning if we're using the eTSEC */
-#define TSEC_REDUCED (1 << 1)
-
-struct tsec_private {
-	volatile tsec_t *regs;
-	volatile tsec_t *phyregs;
-	struct phy_info *phyinfo;
-	uint phyaddr;
-	u32 flags;
-	uint link;
-	uint duplexity;
-	uint speed;
-};
-
-
-/*
- * struct phy_cmd:  A command for reading or writing a PHY register
- *
- * mii_reg:  The register to read or write
- *
- * mii_data:  For writes, the value to put in the register.
- * 	A value of -1 indicates this is a read.
- *
- * funct: A function pointer which is invoked for each command.
- * 	For reads, this function will be passed the value read
- *	from the PHY, and process it.
- *	For writes, the result of this function will be written
- *	to the PHY register
- */
-struct phy_cmd {
-    uint mii_reg;
-    uint mii_data;
-    uint (*funct) (uint mii_reg, struct tsec_private* priv);
-};
-
-/* struct phy_info: a structure which defines attributes for a PHY
- *
- * id will contain a number which represents the PHY.  During
- * startup, the driver will poll the PHY to find out what its
- * UID--as defined by registers 2 and 3--is.  The 32-bit result
- * gotten from the PHY will be shifted right by "shift" bits to
- * discard any bits which may change based on revision numbers
- * unimportant to functionality
- *
- * The struct phy_cmd entries represent pointers to an arrays of
- * commands which tell the driver what to do to the PHY.
- */
-struct phy_info {
-    uint id;
-    char *name;
-    uint shift;
-    /* Called to configure the PHY, and modify the controller
-     * based on the results */
-    struct phy_cmd *config;
-
-    /* Called when starting up the controller */
-    struct phy_cmd *startup;
-
-    /* Called when bringing down the controller */
-    struct phy_cmd *shutdown;
-};
-
-#endif /* __TSEC_H */