Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:
	cpu/arm1176/cpu.c
	cpu/arm1176/start.S
	cpu/arm_cortexa8/s5pc1xx/Makefile
	cpu/arm_cortexa8/s5pc1xx/clock.c
	drivers/serial/serial_s5p.c
	include/asm-arm/arch-s5pc1xx/clk.h
	include/asm-arm/arch-s5pc1xx/gpio.h
	include/asm-arm/arch-s5pc1xx/uart.h

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

17 files changed, 0 insertions, 5561 deletions

diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
deleted file mode 100644
index 15e2c18..0000000
--- a/cpu/mpc83xx/Makefile
+++ /dev/null
@@ -1,62 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright 2004 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).a
-
-START	= start.o
-
-COBJS-y += traps.o
-COBJS-y += cpu.o
-COBJS-y += cpu_init.o
-COBJS-y += speed.o
-COBJS-y += interrupts.o
-COBJS-y += spd_sdram.o
-COBJS-y += ecc.o
-COBJS-$(CONFIG_QE) += qe_io.o
-COBJS-$(CONFIG_FSL_SERDES) += serdes.o
-COBJS-$(CONFIG_PCI) += pci.o
-COBJS-$(CONFIG_PCIE) += pcie.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-
-COBJS	:= $(COBJS-y)
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mpc83xx/config.mk b/cpu/mpc83xx/config.mk
deleted file mode 100644
index e80919b..0000000
--- a/cpu/mpc83xx/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC83xx -DCONFIG_E300 \
-			-ffixed-r2 -msoft-float
-
-# Use default linker script.  Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/cpu/mpc83xx/u-boot.lds
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
deleted file mode 100644
index 51180d6..0000000
--- a/cpu/mpc83xx/cpu.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC83xx family.
- *
- * Derived from the MPC8260 and MPC85xx.
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc83xx.h>
-#include <asm/processor.h>
-#include <libfdt.h>
-#include <tsec.h>
-#include <netdev.h>
-#include <fsl_esdhc.h>
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-#include <asm/immap_qe.h>
-#include <asm/io.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu(void)
-{
-	volatile immap_t *immr;
-	ulong clock = gd->cpu_clk;
-	u32 pvr = get_pvr();
-	u32 spridr;
-	char buf[32];
-	int i;
-
-	const struct cpu_type {
-		char name[15];
-		u32 partid;
-	} cpu_type_list [] = {
-		CPU_TYPE_ENTRY(8311),
-		CPU_TYPE_ENTRY(8313),
-		CPU_TYPE_ENTRY(8314),
-		CPU_TYPE_ENTRY(8315),
-		CPU_TYPE_ENTRY(8321),
-		CPU_TYPE_ENTRY(8323),
-		CPU_TYPE_ENTRY(8343),
-		CPU_TYPE_ENTRY(8347_TBGA_),
-		CPU_TYPE_ENTRY(8347_PBGA_),
-		CPU_TYPE_ENTRY(8349),
-		CPU_TYPE_ENTRY(8358_TBGA_),
-		CPU_TYPE_ENTRY(8358_PBGA_),
-		CPU_TYPE_ENTRY(8360),
-		CPU_TYPE_ENTRY(8377),
-		CPU_TYPE_ENTRY(8378),
-		CPU_TYPE_ENTRY(8379),
-	};
-
-	immr = (immap_t *)CONFIG_SYS_IMMR;
-
-	puts("CPU:   ");
-
-	switch (pvr & 0xffff0000) {
-		case PVR_E300C1:
-			printf("e300c1, ");
-			break;
-
-		case PVR_E300C2:
-			printf("e300c2, ");
-			break;
-
-		case PVR_E300C3:
-			printf("e300c3, ");
-			break;
-
-		case PVR_E300C4:
-			printf("e300c4, ");
-			break;
-
-		default:
-			printf("Unknown core, ");
-	}
-
-	spridr = immr->sysconf.spridr;
-
-	for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
-		if (cpu_type_list[i].partid == PARTID_NO_E(spridr)) {
-			puts("MPC");
-			puts(cpu_type_list[i].name);
-			if (IS_E_PROCESSOR(spridr))
-				puts("E");
-			if (REVID_MAJOR(spridr) >= 2)
-				puts("A");
-			printf(", Rev: %d.%d", REVID_MAJOR(spridr),
-			       REVID_MINOR(spridr));
-			break;
-		}
-
-	if (i == ARRAY_SIZE(cpu_type_list))
-		printf("(SPRIDR %08x unknown), ", spridr);
-
-	printf(" at %s MHz, ", strmhz(buf, clock));
-
-	printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk));
-
-	return 0;
-}
-
-
-/*
- * Program a UPM with the code supplied in the table.
- *
- * The 'dummy' variable is used to increment the MAD. 'dummy' is
- * supposed to be a pointer to the memory of the device being
- * programmed by the UPM.  The data in the MDR is written into
- * memory and the MAD is incremented every time there's a write
- * to 'dummy'. Unfortunately, the current prototype for this
- * function doesn't allow for passing the address of this
- * device, and changing the prototype will break a number lots
- * of other code, so we need to use a round-about way of finding
- * the value for 'dummy'.
- *
- * The value can be extracted from the base address bits of the
- * Base Register (BR) associated with the specific UPM.  To find
- * that BR, we need to scan all 8 BRs until we find the one that
- * has its MSEL bits matching the UPM we want.  Once we know the
- * right BR, we can extract the base address bits from it.
- *
- * The MxMR and the BR and OR of the chosen bank should all be
- * configured before calling this function.
- *
- * Parameters:
- * upm: 0=UPMA, 1=UPMB, 2=UPMC
- * table: Pointer to an array of values to program
- * size: Number of elements in the array.  Must be 64 or less.
- */
-void upmconfig (uint upm, uint *table, uint size)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbus = &immap->lbus;
-	volatile uchar *dummy = NULL;
-	const u32 msel = (upm + 4) << BR_MSEL_SHIFT;	/* What the MSEL field in BRn should be */
-	volatile u32 *mxmr = &lbus->mamr + upm;	/* Pointer to mamr, mbmr, or mcmr */
-	uint i;
-
-	/* Scan all the banks to determine the base address of the device */
-	for (i = 0; i < 8; i++) {
-		if ((lbus->bank[i].br & BR_MSEL) == msel) {
-			dummy = (uchar *) (lbus->bank[i].br & BR_BA);
-			break;
-		}
-	}
-
-	if (!dummy) {
-		printf("Error: %s() could not find matching BR\n", __FUNCTION__);
-		hang();
-	}
-
-	/* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
-	*mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
-
-	for (i = 0; i < size; i++) {
-		lbus->mdr = table[i];
-		__asm__ __volatile__ ("sync");
-		*dummy = 0;	/* Write the value to memory and increment MAD */
-		__asm__ __volatile__ ("sync");
-		while(((*mxmr & 0x3f) != ((i + 1) & 0x3f)));
-	}
-
-	/* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
-	*mxmr &= 0xCFFFFFC0;
-}
-
-
-int
-do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	ulong msr;
-#ifndef MPC83xx_RESET
-	ulong addr;
-#endif
-
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-	puts("Resetting the board.\n");
-
-#ifdef MPC83xx_RESET
-
-	/* Interrupts and MMU off */
-	__asm__ __volatile__ ("mfmsr    %0":"=r" (msr):);
-
-	msr &= ~( MSR_EE | MSR_IR | MSR_DR);
-	__asm__ __volatile__ ("mtmsr    %0"::"r" (msr));
-
-	/* enable Reset Control Reg */
-	immap->reset.rpr = 0x52535445;
-	__asm__ __volatile__ ("sync");
-	__asm__ __volatile__ ("isync");
-
-	/* confirm Reset Control Reg is enabled */
-	while(!((immap->reset.rcer) & RCER_CRE));
-
-	udelay(200);
-
-	/* perform reset, only one bit */
-	immap->reset.rcr = RCR_SWHR;
-
-#else	/* ! MPC83xx_RESET */
-
-	immap->reset.rmr = RMR_CSRE;    /* Checkstop Reset enable */
-
-	/* Interrupts and MMU off */
-	__asm__ __volatile__ ("mfmsr    %0":"=r" (msr):);
-
-	msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
-	__asm__ __volatile__ ("mtmsr    %0"::"r" (msr));
-
-	/*
-	 * Trying to execute the next instruction at a non-existing address
-	 * should cause a machine check, resulting in reset
-	 */
-	addr = CONFIG_SYS_RESET_ADDRESS;
-
-	((void (*)(void)) addr) ();
-#endif	/* MPC83xx_RESET */
-
-	return 1;
-}
-
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- */
-
-unsigned long get_tbclk(void)
-{
-	ulong tbclk;
-
-	tbclk = (gd->bus_clk + 3L) / 4L;
-
-	return tbclk;
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
-	int re_enable = disable_interrupts();
-
-	/* Reset the 83xx watchdog */
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	immr->wdt.swsrr = 0x556c;
-	immr->wdt.swsrr = 0xaa39;
-
-	if (re_enable)
-		enable_interrupts ();
-}
-#endif
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_UEC_ETH)
-	uec_standard_init(bis);
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
-	tsec_standard_init(bis);
-#endif
-	return 0;
-}
-
-/*
- * Initializes on-chip MMC controllers.
- * to override, implement board_mmc_init()
- */
-int cpu_mmc_init(bd_t *bis)
-{
-#ifdef CONFIG_FSL_ESDHC
-	return fsl_esdhc_mmc_init(bis);
-#else
-	return 0;
-#endif
-}
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-#if !defined(CONFIG_MPC8360)
-#error "CONFIG_BOOTCOUNT_LIMIT only for MPC8360 implemented"
-#endif
-
-#if !defined(CONFIG_BOOTCOUNT_ADDR)
-#define CONFIG_BOOTCOUNT_ADDR	(0x110000 + QE_MURAM_SIZE - 2 * sizeof(unsigned long))
-#endif
-
-#include <asm/io.h>
-
-void bootcount_store (ulong a)
-{
-	void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
-	out_be32 (reg, a);
-	out_be32 (reg + 4, BOOTCOUNT_MAGIC);
-}
-
-ulong bootcount_load (void)
-{
-	void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
-
-	if (in_be32 (reg + 4) != BOOTCOUNT_MAGIC)
-		return 0;
-	else
-		return in_be32 (reg);
-}
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
deleted file mode 100644
index 75b4522..0000000
--- a/cpu/mpc83xx/cpu_init.c
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-#include <ioports.h>
-#include <asm/io.h>
-#ifdef CONFIG_USB_EHCI_FSL
-#include <usb/ehci-fsl.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_QE
-extern qe_iop_conf_t qe_iop_conf_tab[];
-extern void qe_config_iopin(u8 port, u8 pin, int dir,
-			 int open_drain, int assign);
-extern void qe_init(uint qe_base);
-extern void qe_reset(void);
-
-static void config_qe_ioports(void)
-{
-	u8	port, pin;
-	int	dir, open_drain, assign;
-	int	i;
-
-	for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
-		port		= qe_iop_conf_tab[i].port;
-		pin		= qe_iop_conf_tab[i].pin;
-		dir		= qe_iop_conf_tab[i].dir;
-		open_drain	= qe_iop_conf_tab[i].open_drain;
-		assign		= qe_iop_conf_tab[i].assign;
-		qe_config_iopin(port, pin, dir, open_drain, assign);
-	}
-}
-#endif
-
-/*
- * Breathe some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * im)
-{
-	__be32 acr_mask =
-#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
-		(ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
-		(ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_APARK	/* Arbiter address parking mode */
-		(ACR_APARK << ACR_APARK_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_PARKM	/* Arbiter parking master */
-		(ACR_PARKM << ACR_PARKM_SHIFT) |
-#endif
-		0;
-	__be32 acr_val =
-#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
-		(CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
-		(CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_APARK	/* Arbiter address parking mode */
-		(CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_PARKM	/* Arbiter parking master */
-		(CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) |
-#endif
-		0;
-	__be32 spcr_mask =
-#ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */
-		(SPCR_OPT << SPCR_OPT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
-		(SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
-		(SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
-		(SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
-#endif
-		0;
-	__be32 spcr_val =
-#ifdef CONFIG_SYS_SPCR_OPT
-		(CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
-		(CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
-		(CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
-		(CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
-#endif
-		0;
-	__be32 sccr_mask =
-#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
-		(SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
-		(SCCR_PCICM << SCCR_PCICM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
-		(SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
-		(SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
-		(SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
-		(SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
-		(SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
-		(SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
-		(SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
-		(SCCR_SATACM << SCCR_SATACM_SHIFT) |
-#endif
-		0;
-	__be32 sccr_val =
-#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
-		(CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
-		(CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
-		(CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
-		(CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
-		(CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
-		(CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
-		(CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
-		(CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
-		(CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
-		(CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) |
-#endif
-		0;
-	__be32 lcrr_mask =
-#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
-		LCRR_DBYP |
-#endif
-#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */
-		LCRR_EADC |
-#endif
-#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
-		LCRR_CLKDIV |
-#endif
-		0;
-	__be32 lcrr_val =
-#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
-		CONFIG_SYS_LCRR_DBYP |
-#endif
-#ifdef CONFIG_SYS_LCRR_EADC
-		CONFIG_SYS_LCRR_EADC |
-#endif
-#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
-		CONFIG_SYS_LCRR_CLKDIV |
-#endif
-		0;
-
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
-	/* Clear initial global data */
-	memset ((void *) gd, 0, sizeof (gd_t));
-
-	/* system performance tweaking */
-	clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val);
-
-	clrsetbits_be32(&im->sysconf.spcr, spcr_mask, spcr_val);
-
-	clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val);
-
-	/* RSR - Reset Status Register - clear all status (4.6.1.3) */
-	gd->reset_status = __raw_readl(&im->reset.rsr);
-	__raw_writel(~(RSR_RES), &im->reset.rsr);
-
-	/* AER - Arbiter Event Register - store status */
-	gd->arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr);
-	gd->arbiter_event_address = __raw_readl(&im->arbiter.aeadr);
-
-	/*
-	 * RMR - Reset Mode Register
-	 * contains checkstop reset enable (4.6.1.4)
-	 */
-	__raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr);
-
-	/* LCRR - Clock Ratio Register (10.3.1.16)
-	 * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description
-	 */
-	clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val);
-	__raw_readl(&im->lbus.lcrr);
-	isync();
-
-	/* Enable Time Base & Decrementer ( so we will have udelay() )*/
-	setbits_be32(&im->sysconf.spcr, SPCR_TBEN);
-
-	/* System General Purpose Register */
-#ifdef CONFIG_SYS_SICRH
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313)
-	/* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
-	__raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH,
-		     &im->sysconf.sicrh);
-#else
-	__raw_writel(CONFIG_SYS_SICRH, &im->sysconf.sicrh);
-#endif
-#endif
-#ifdef CONFIG_SYS_SICRL
-	__raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl);
-#endif
-#ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */
-	__raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr);
-#endif
-#ifdef CONFIG_SYS_OBIR /* Output buffer impedance register */
-	__raw_writel(CONFIG_SYS_OBIR, &im->sysconf.obir);
-#endif
-
-#ifdef CONFIG_QE
-	/* Config QE ioports */
-	config_qe_ioports();
-#endif
-
-	/*
-	 * Memory Controller:
-	 */
-
-	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
-	 * addresses - these have to be modified later when FLASH size
-	 * has been determined
-	 */
-
-#if defined(CONFIG_SYS_BR0_PRELIM)  \
-	&& defined(CONFIG_SYS_OR0_PRELIM) \
-	&& defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \
-	&& defined(CONFIG_SYS_LBLAWAR0_PRELIM)
-	im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM;
-	im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM;
-	im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM;
-	im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM;
-#else
-#error	CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
-	im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM;
-	im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM)
-	im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM;
-	im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
-	im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM;
-	im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
-	im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM;
-	im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
-	im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM;
-	im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM)
-	im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM;
-	im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
-	im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM;
-	im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM)
-	im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM;
-	im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
-	im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM;
-	im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM)
-	im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM;
-	im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
-	im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM;
-	im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM)
-	im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM;
-	im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
-	im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM;
-	im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM)
-	im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM;
-	im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM;
-#endif
-#ifdef CONFIG_SYS_GPIO1_PRELIM
-	im->gpio[0].dat = CONFIG_SYS_GPIO1_DAT;
-	im->gpio[0].dir = CONFIG_SYS_GPIO1_DIR;
-#endif
-#ifdef CONFIG_SYS_GPIO2_PRELIM
-	im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT;
-	im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR;
-#endif
-#ifdef CONFIG_USB_EHCI_FSL
-#ifndef CONFIG_MPC834x
-	uint32_t temp;
-	struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
-
-	/* Configure interface. */
-	setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
-
-	/* Wait for clock to stabilize */
-	do {
-		temp = __raw_readl(&ehci->control);
-		udelay(1000);
-	} while (!(temp & PHY_CLK_VALID));
-#endif
-#endif
-}
-
-int cpu_init_r (void)
-{
-#ifdef CONFIG_QE
-	uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */
-
-	qe_init(qe_base);
-	qe_reset();
-#endif
-	return 0;
-}
-
-/*
- * Print out the bus arbiter event
- */
-#if defined(CONFIG_DISPLAY_AER_FULL)
-static int print_83xx_arb_event(int force)
-{
-	static char* event[] = {
-		"Address Time Out",
-		"Data Time Out",
-		"Address Only Transfer Type",
-		"External Control Word Transfer Type",
-		"Reserved Transfer Type",
-		"Transfer Error",
-		"reserved",
-		"reserved"
-	};
-	static char* master[] = {
-		"e300 Core Data Transaction",
-		"reserved",
-		"e300 Core Instruction Fetch",
-		"reserved",
-		"TSEC1",
-		"TSEC2",
-		"USB MPH",
-		"USB DR",
-		"Encryption Core",
-		"I2C Boot Sequencer",
-		"JTAG",
-		"reserved",
-		"eSDHC",
-		"PCI1",
-		"PCI2",
-		"DMA",
-		"QUICC Engine 00",
-		"QUICC Engine 01",
-		"QUICC Engine 10",
-		"QUICC Engine 11",
-		"reserved",
-		"reserved",
-		"reserved",
-		"reserved",
-		"SATA1",
-		"SATA2",
-		"SATA3",
-		"SATA4",
-		"reserved",
-		"PCI Express 1",
-		"PCI Express 2",
-		"TDM-DMAC"
-	};
-	static char *transfer[] = {
-		"Address-only, Clean Block",
-		"Address-only, lwarx reservation set",
-		"Single-beat or Burst write",
-		"reserved",
-		"Address-only, Flush Block",
-		"reserved",
-		"Burst write",
-		"reserved",
-		"Address-only, sync",
-		"Address-only, tlbsync",
-		"Single-beat or Burst read",
-		"Single-beat or Burst read",
-		"Address-only, Kill Block",
-		"Address-only, icbi",
-		"Burst read",
-		"reserved",
-		"Address-only, eieio",
-		"reserved",
-		"Single-beat write",
-		"reserved",
-		"ecowx - Illegal single-beat write",
-		"reserved",
-		"reserved",
-		"reserved",
-		"Address-only, TLB Invalidate",
-		"reserved",
-		"Single-beat or Burst read",
-		"reserved",
-		"eciwx - Illegal single-beat read",
-		"reserved",
-		"Burst read",
-		"reserved"
-	};
-
-	int etype = (gd->arbiter_event_attributes & AEATR_EVENT)
-	            >> AEATR_EVENT_SHIFT;
-	int mstr_id = (gd->arbiter_event_attributes & AEATR_MSTR_ID)
-	              >> AEATR_MSTR_ID_SHIFT;
-	int tbst = (gd->arbiter_event_attributes & AEATR_TBST)
-	           >> AEATR_TBST_SHIFT;
-	int tsize = (gd->arbiter_event_attributes & AEATR_TSIZE)
-	            >> AEATR_TSIZE_SHIFT;
-	int ttype = (gd->arbiter_event_attributes & AEATR_TTYPE)
-	            >> AEATR_TTYPE_SHIFT;
-
-	if (!force && !gd->arbiter_event_address)
-		return 0;
-
-	puts("Arbiter Event Status:\n");
-	printf("       Event Address: 0x%08lX\n", gd->arbiter_event_address);
-	printf("       Event Type:    0x%1x  = %s\n", etype, event[etype]);
-	printf("       Master ID:     0x%02x = %s\n", mstr_id, master[mstr_id]);
-	printf("       Transfer Size: 0x%1x  = %d bytes\n", (tbst<<3) | tsize,
-				tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize);
-	printf("       Transfer Type: 0x%02x = %s\n", ttype, transfer[ttype]);
-
-	return gd->arbiter_event_address;
-}
-
-#elif defined(CONFIG_DISPLAY_AER_BRIEF)
-
-static int print_83xx_arb_event(int force)
-{
-	if (!force && !gd->arbiter_event_address)
-		return 0;
-
-	printf("Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n",
-		gd->arbiter_event_attributes, gd->arbiter_event_address);
-
-	return gd->arbiter_event_address;
-}
-#endif /* CONFIG_DISPLAY_AER_xxxx */
-
-/*
- * Figure out the cause of the reset
- */
-int prt_83xx_rsr(void)
-{
-	static struct {
-		ulong mask;
-		char *desc;
-	} bits[] = {
-		{
-		RSR_SWSR, "Software Soft"}, {
-		RSR_SWHR, "Software Hard"}, {
-		RSR_JSRS, "JTAG Soft"}, {
-		RSR_CSHR, "Check Stop"}, {
-		RSR_SWRS, "Software Watchdog"}, {
-		RSR_BMRS, "Bus Monitor"}, {
-		RSR_SRS,  "External/Internal Soft"}, {
-		RSR_HRS,  "External/Internal Hard"}
-	};
-	static int n = sizeof bits / sizeof bits[0];
-	ulong rsr = gd->reset_status;
-	int i;
-	char *sep;
-
-	puts("Reset Status:");
-
-	sep = " ";
-	for (i = 0; i < n; i++)
-		if (rsr & bits[i].mask) {
-			printf("%s%s", sep, bits[i].desc);
-			sep = ", ";
-		}
-	puts("\n");
-
-#if defined(CONFIG_DISPLAY_AER_FULL) || defined(CONFIG_DISPLAY_AER_BRIEF)
-	print_83xx_arb_event(rsr & RSR_BMRS);
-#endif
-	puts("\n");
-
-	return 0;
-}
diff --git a/cpu/mpc83xx/ecc.c b/cpu/mpc83xx/ecc.c
deleted file mode 100644
index f3942b4..0000000
--- a/cpu/mpc83xx/ecc.c
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- * based on the contribution of Marian Balakowicz <m8@semihalf.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-#include <command.h>
-
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-void ecc_print_status(void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-
-	printf("\nECC mode: %s\n\n",
-	       (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
-	/* Interrupts */
-	printf("Memory Error Interrupt Enable:\n");
-	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
-	       (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
-	printf("  Single-Bit Error Interrupt Enable: %d\n",
-	       (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
-	printf("  Memory Select Error Interrupt Enable: %d\n\n",
-	       (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
-	/* Error disable */
-	printf("Memory Error Disable:\n");
-	printf("  Multiple-Bit Error Disable: %d\n",
-	       (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
-	printf("  Sinle-Bit Error Disable: %d\n",
-	       (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
-	printf("  Memory Select Error Disable: %d\n\n",
-	       (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
-	/* Error injection */
-	printf("Memory Data Path Error Injection Mask High/Low: %08x %08x\n",
-	       ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
-	printf("Memory Data Path Error Injection Mask ECC:\n");
-	printf("  ECC Mirror Byte: %d\n",
-	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
-	printf("  ECC Injection Enable: %d\n",
-	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
-	printf("  ECC Error Injection Mask: 0x%02x\n\n",
-	       ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
-	/* SBE counter/threshold */
-	printf("Memory Single-Bit Error Management (0..255):\n");
-	printf("  Single-Bit Error Threshold: %d\n",
-	       (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
-	printf("  Single-Bit Error Counter: %d\n\n",
-	       (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
-	/* Error detect */
-	printf("Memory Error Detect:\n");
-	printf("  Multiple Memory Errors: %d\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
-	printf("  Multiple-Bit Error: %d\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
-	printf("  Single-Bit Error: %d\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
-	printf("  Memory Select Error: %d\n\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
-	/* Capture data */
-	printf("Memory Error Address Capture: 0x%08x\n", ddr->capture_address);
-	printf("Memory Data Path Read Capture High/Low: %08x %08x\n",
-	       ddr->capture_data_hi, ddr->capture_data_lo);
-	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
-	       ddr->capture_ecc & CAPTURE_ECC_ECE);
-
-	printf("Memory Error Attributes Capture:\n");
-	printf(" Data Beat Number: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
-	       ECC_CAPT_ATTR_BNUM_SHIFT);
-	printf("  Transaction Size: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
-	       ECC_CAPT_ATTR_TSIZ_SHIFT);
-	printf("  Transaction Source: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
-	       ECC_CAPT_ATTR_TSRC_SHIFT);
-	printf("  Transaction Type: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
-	       ECC_CAPT_ATTR_TTYP_SHIFT);
-	printf("  Error Information Valid: %d\n\n",
-	       ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-	volatile u32 val;
-	u64 *addr;
-	u32 count;
-	register u64 *i;
-	u32 ret[2];
-	u32 pattern[2];
-	u32 writeback[2];
-
-	/* The pattern is written into memory to generate error */
-	pattern[0] = 0xfedcba98UL;
-	pattern[1] = 0x76543210UL;
-
-	/* After injecting error, re-initialize the memory with the value */
-	writeback[0] = 0x01234567UL;
-	writeback[1] = 0x89abcdefUL;
-
-	if (argc > 4) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
-
-	if (argc == 2) {
-		if (strcmp(argv[1], "status") == 0) {
-			ecc_print_status();
-			return 0;
-		} else if (strcmp(argv[1], "captureclear") == 0) {
-			ddr->capture_address = 0;
-			ddr->capture_data_hi = 0;
-			ddr->capture_data_lo = 0;
-			ddr->capture_ecc = 0;
-			ddr->capture_attributes = 0;
-			return 0;
-		}
-	}
-	if (argc == 3) {
-		if (strcmp(argv[1], "sbecnt") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, "
-				       "should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "sbethr") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, "
-				       "should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "errdisable") == 0) {
-			val = ddr->err_disable;
-
-			if (strcmp(argv[2], "+sbe") == 0) {
-				val |= ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "+mbe") == 0) {
-				val |= ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "+mse") == 0) {
-				val |= ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "+all") == 0) {
-				val |= (ECC_ERROR_DISABLE_SBED |
-					ECC_ERROR_DISABLE_MBED |
-					ECC_ERROR_DISABLE_MSED);
-			} else if (strcmp(argv[2], "-sbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "-mbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "-mse") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "-all") == 0) {
-				val &= ~(ECC_ERROR_DISABLE_SBED |
-					 ECC_ERROR_DISABLE_MBED |
-					 ECC_ERROR_DISABLE_MSED);
-			} else {
-				printf("Incorrect err_disable field\n");
-				return 1;
-			}
-
-			ddr->err_disable = val;
-			__asm__ __volatile__("sync");
-			__asm__ __volatile__("isync");
-			return 0;
-		} else if (strcmp(argv[1], "errdetectclr") == 0) {
-			val = ddr->err_detect;
-
-			if (strcmp(argv[2], "mme") == 0) {
-				val |= ECC_ERROR_DETECT_MME;
-			} else if (strcmp(argv[2], "sbe") == 0) {
-				val |= ECC_ERROR_DETECT_SBE;
-			} else if (strcmp(argv[2], "mbe") == 0) {
-				val |= ECC_ERROR_DETECT_MBE;
-			} else if (strcmp(argv[2], "mse") == 0) {
-				val |= ECC_ERROR_DETECT_MSE;
-			} else if (strcmp(argv[2], "all") == 0) {
-				val |= (ECC_ERROR_DETECT_MME |
-					ECC_ERROR_DETECT_MBE |
-					ECC_ERROR_DETECT_SBE |
-					ECC_ERROR_DETECT_MSE);
-			} else {
-				printf("Incorrect err_detect field\n");
-				return 1;
-			}
-
-			ddr->err_detect = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatahi") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_hi = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatalo") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_lo = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectecc") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-			if (val > 0xff) {
-				printf("Incorrect ECC inject mask, "
-				       "should be 0x00..0xff\n");
-				return 1;
-			}
-			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		} else if (strcmp(argv[1], "inject") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EIEN;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EIEN;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			__asm__ __volatile__("sync");
-			__asm__ __volatile__("isync");
-			return 0;
-		} else if (strcmp(argv[1], "mirror") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EMB;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EMB;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		}
-	}
-	if (argc == 4) {
-		if (strcmp(argv[1], "testdw") == 0) {
-			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
-			count = simple_strtoul(argv[3], NULL, 16);
-
-			if ((u32) addr % 8) {
-				printf("Address not alligned on "
-				       "double word boundary\n");
-				return 1;
-			}
-			disable_interrupts();
-
-			for (i = addr; i < addr + count; i++) {
-
-				/* enable injects */
-				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* write memory location injecting errors */
-				ppcDWstore((u32 *) i, pattern);
-				__asm__ __volatile__("sync");
-
-				/* disable injects */
-				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* read data, this generates ECC error */
-				ppcDWload((u32 *) i, ret);
-				__asm__ __volatile__("sync");
-
-				/* re-initialize memory, double word write the location again,
-				 * generates new ECC code this time */
-				ppcDWstore((u32 *) i, writeback);
-				__asm__ __volatile__("sync");
-			}
-			enable_interrupts();
-			return 0;
-		}
-		if (strcmp(argv[1], "testword") == 0) {
-			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
-			count = simple_strtoul(argv[3], NULL, 16);
-
-			if ((u32) addr % 8) {
-				printf("Address not alligned on "
-				       "double word boundary\n");
-				return 1;
-			}
-			disable_interrupts();
-
-			for (i = addr; i < addr + count; i++) {
-
-				/* enable injects */
-				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* write memory location injecting errors */
-				*(u32 *) i = 0xfedcba98UL;
-				__asm__ __volatile__("sync");
-
-				/* sub double word write,
-				 * bus will read-modify-write,
-				 * generates ECC error */
-				*((u32 *) i + 1) = 0x76543210UL;
-				__asm__ __volatile__("sync");
-
-				/* disable injects */
-				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* re-initialize memory,
-				 * double word write the location again,
-				 * generates new ECC code this time */
-				ppcDWstore((u32 *) i, writeback);
-				__asm__ __volatile__("sync");
-			}
-			enable_interrupts();
-			return 0;
-		}
-	}
-	cmd_usage(cmdtp);
-	return 1;
-}
-
-U_BOOT_CMD(ecc, 4, 0, do_ecc,
-	   "support for DDR ECC features",
-	   "status              - print out status info\n"
-	   "ecc captureclear        - clear capture regs data\n"
-	   "ecc sbecnt <val>        - set Single-Bit Error counter\n"
-	   "ecc sbethr <val>        - set Single-Bit Threshold\n"
-	   "ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
-	   "  [-|+]sbe - Single-Bit Error\n"
-	   "  [-|+]mbe - Multiple-Bit Error\n"
-	   "  [-|+]mse - Memory Select Error\n"
-	   "  [-|+]all - all errors\n"
-	   "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
-	   "  mme - Multiple Memory Errors\n"
-	   "  sbe - Single-Bit Error\n"
-	   "  mbe - Multiple-Bit Error\n"
-	   "  mse - Memory Select Error\n"
-	   "  all - all errors\n"
-	   "ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
-	   "ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
-	   "ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
-	   "ecc inject <en|dis>    - enable/disable error injection\n"
-	   "ecc mirror <en|dis>    - enable/disable mirror byte\n"
-	   "ecc testdw <addr> <cnt>  - test mem region with double word access:\n"
-	   "  - enables injects\n"
-	   "  - writes pattern injecting errors with double word access\n"
-	   "  - disables injects\n"
-	   "  - reads pattern back with double word access, generates error\n"
-	   "  - re-inits memory\n"
-	   "ecc testword <addr> <cnt>  - test mem region with word access:\n"
-	   "  - enables injects\n"
-	   "  - writes pattern injecting errors with word access\n"
-	   "  - writes pattern with word access, generates error\n"
-	   "  - disables injects\n" "  - re-inits memory");
-#endif
diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c
deleted file mode 100644
index daf73a6..0000000
--- a/cpu/mpc83xx/fdt.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/processor.h>
-
-extern void ft_qe_setup(void *blob);
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_BOOTCOUNT_LIMIT) && defined(CONFIG_MPC8360)
-#include <asm/immap_qe.h>
-
-void fdt_fixup_muram (void *blob)
-{
-	ulong data[2];
-
-	data[0] = 0;
-	data[1] = QE_MURAM_SIZE - 2 * sizeof(unsigned long);
-	do_fixup_by_compat(blob, "fsl,qe-muram-data", "reg",
-			data, sizeof (data), 0);
-}
-#endif
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
-	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	int spridr = immr->sysconf.spridr;
-
-	/*
-	 * delete crypto node if not on an E-processor
-	 * initial revisions of the MPC834xE/6xE have the original SEC 2.0.
-	 * EA revisions got the SEC uprevved to 2.4 but since the default device
-	 * tree contains SEC 2.0 properties we uprev them here.
-	 */
-	if (!IS_E_PROCESSOR(spridr))
-		fdt_fixup_crypto_node(blob, 0);
-	else if (IS_E_PROCESSOR(spridr) &&
-		 (SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
-		  SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
-		 REVID_MAJOR(spridr) >= 2)
-		fdt_fixup_crypto_node(blob, 0x0204);
-
-#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
-    defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
-    defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
-	fdt_fixup_ethernet(blob);
-#ifdef CONFIG_MPC8313
-	/*
-	* mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
-	* h/w (see AN3545).  The base device tree in use has rev. 1 ID numbers,
-	* so if on Rev. 2 (and higher) h/w, we fix them up here
-	*/
-	if (REVID_MAJOR(immr->sysconf.spridr) >= 2) {
-		int nodeoffset, path;
-		const char *prop;
-
-		nodeoffset = fdt_path_offset(blob, "/aliases");
-		if (nodeoffset >= 0) {
-#if defined(CONFIG_HAS_ETH0)
-			prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
-			if (prop) {
-				u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 };
-
-				path = fdt_path_offset(blob, prop);
-				prop = fdt_getprop(blob, path, "interrupts", 0);
-				if (prop)
-					fdt_setprop(blob, path, "interrupts",
-						    &tmp, sizeof(tmp));
-			}
-#endif
-#if defined(CONFIG_HAS_ETH1)
-			prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
-			if (prop) {
-				u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 };
-
-				path = fdt_path_offset(blob, prop);
-				prop = fdt_getprop(blob, path, "interrupts", 0);
-				if (prop)
-					fdt_setprop(blob, path, "interrupts",
-						    &tmp, sizeof(tmp));
-			}
-#endif
-		}
-	}
-#endif
-#endif
-
-	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-		"timebase-frequency", (bd->bi_busfreq / 4), 1);
-	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-		"bus-frequency", bd->bi_busfreq, 1);
-	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-		"clock-frequency", gd->core_clk, 1);
-	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
-		"bus-frequency", bd->bi_busfreq, 1);
-	do_fixup_by_compat_u32(blob, "fsl,soc",
-		"bus-frequency", bd->bi_busfreq, 1);
-	do_fixup_by_compat_u32(blob, "fsl,soc",
-		"clock-frequency", bd->bi_busfreq, 1);
-	do_fixup_by_compat_u32(blob, "fsl,immr",
-		"bus-frequency", bd->bi_busfreq, 1);
-	do_fixup_by_compat_u32(blob, "fsl,immr",
-		"clock-frequency", bd->bi_busfreq, 1);
-#ifdef CONFIG_QE
-	ft_qe_setup(blob);
-#endif
-
-#ifdef CONFIG_SYS_NS16550
-	do_fixup_by_compat_u32(blob, "ns16550",
-		"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
-#endif
-
-	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
-#if defined(CONFIG_BOOTCOUNT_LIMIT)
-	fdt_fixup_muram (blob);
-#endif
-}
diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c
deleted file mode 100644
index faffbaf..0000000
--- a/cpu/mpc83xx/interrupts.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright 2004 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <mpc83xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct irq_action {
-	interrupt_handler_t *handler;
-	void *arg;
-	ulong count;
-};
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-	*decrementer_count = (gd->bus_clk / 4) / CONFIG_SYS_HZ;
-
-	/* Enable e300 time base */
-
-	immr->sysconf.spcr |= 0x00400000;
-
-	return 0;
-}
-
-
-/*
- * Handle external interrupts
- */
-
-void external_interrupt (struct pt_regs *regs)
-{
-}
-
-
-/*
- * Install and free an interrupt handler.
- */
-
-void
-irq_install_handler (int irq, interrupt_handler_t * handler, void *arg)
-{
-}
-
-
-void irq_free_handler (int irq)
-{
-}
-
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
-	/* nothing to do here */
-	return;
-}
-
-
-#if defined(CONFIG_CMD_IRQ)
-
-/* ripped this out of ppc4xx/interrupts.c */
-
-/*
- * irqinfo - print information about PCI devices
- */
-
-void
-do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
-{
-}
-
-#endif
diff --git a/cpu/mpc83xx/nand_init.c b/cpu/mpc83xx/nand_init.c
deleted file mode 100644
index 38e141a..0000000
--- a/cpu/mpc83xx/nand_init.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breathe some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * im)
-{
-	int i;
-
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
-	/* Clear initial global data */
-	for (i = 0; i < sizeof(gd_t); i++)
-		((char *)gd)[i] = 0;
-
-	/* system performance tweaking */
-
-#ifdef CONFIG_SYS_ACR_PIPE_DEP
-	/* Arbiter pipeline depth */
-	im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
-			  (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
-#endif
-
-#ifdef CONFIG_SYS_ACR_RPTCNT
-	/* Arbiter repeat count */
-	im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
-			  (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
-#endif
-
-#ifdef CONFIG_SYS_SPCR_OPT
-	/* Optimize transactions between CSB and other devices */
-	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
-			   (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
-#endif
-
-	/* Enable Time Base & Decrimenter (so we will have udelay()) */
-	im->sysconf.spcr |= SPCR_TBEN;
-
-	/* DDR control driver register */
-#ifdef CONFIG_SYS_DDRCDR
-	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR;
-#endif
-	/* Output buffer impedance register */
-#ifdef CONFIG_SYS_OBIR
-	im->sysconf.obir = CONFIG_SYS_OBIR;
-#endif
-
-	/*
-	 * Memory Controller:
-	 */
-
-	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
-	 * addresses - these have to be modified later when FLASH size
-	 * has been determined
-	 */
-
-#if defined(CONFIG_SYS_NAND_BR_PRELIM)  \
-	&& defined(CONFIG_SYS_NAND_OR_PRELIM) \
-	&& defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \
-	&& defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM)
-	im->lbus.bank[0].br = CONFIG_SYS_NAND_BR_PRELIM;
-	im->lbus.bank[0].or = CONFIG_SYS_NAND_OR_PRELIM;
-	im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM;
-	im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM;
-#else
-#error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM, CONFIG_SYS_NAND_LBLAWBAR_PRELIM & CONFIG_SYS_NAND_LBLAWAR_PRELIM must be defined
-#endif
-}
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- */
-unsigned long get_tbclk(void)
-{
-	return (gd->bus_clk + 3L) / 4L;
-}
-
-void puts(const char *str)
-{
-	while (*str)
-		putc(*str++);
-}
diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
deleted file mode 100644
index a42b230..0000000
--- a/cpu/mpc83xx/pci.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2007
- *
- * Author: Scott Wood <scottwood@freescale.com>,
- * with some bits from older board-specific PCI initialization.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-#include <asm/mpc8349_pci.h>
-
-#define MAX_BUSES 2
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct pci_controller pci_hose[MAX_BUSES];
-static int pci_num_buses;
-
-static void pci_init_bus(int bus, struct pci_region *reg)
-{
-	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile pot83xx_t *pot = immr->ios.pot;
-	volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus];
-	struct pci_controller *hose = &pci_hose[bus];
-	u32 dev;
-	u16 reg16;
-	int i;
-
-	if (bus == 1)
-		pot += 3;
-
-	/* Setup outbound translation windows */
-	for (i = 0; i < 3; i++, reg++, pot++) {
-		if (reg->size == 0)
-			break;
-
-		hose->regions[i] = *reg;
-		hose->region_count++;
-
-		pot->potar = reg->bus_start >> 12;
-		pot->pobar = reg->phys_start >> 12;
-		pot->pocmr = ~(reg->size - 1) >> 12;
-
-		if (reg->flags & PCI_REGION_IO)
-			pot->pocmr |= POCMR_IO;
-#ifdef CONFIG_83XX_PCI_STREAMING
-		else if (reg->flags & PCI_REGION_PREFETCH)
-			pot->pocmr |= POCMR_SE;
-#endif
-
-		if (bus == 1)
-			pot->pocmr |= POCMR_DST;
-
-		pot->pocmr |= POCMR_EN;
-	}
-
-	/* Point inbound translation at RAM */
-	pci_ctrl->pitar1 = 0;
-	pci_ctrl->pibar1 = 0;
-	pci_ctrl->piebar1 = 0;
-	pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
-	                   PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1));
-
-	i = hose->region_count++;
-	hose->regions[i].bus_start = 0;
-	hose->regions[i].phys_start = 0;
-	hose->regions[i].size = gd->ram_size;
-	hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
-
-	hose->first_busno = pci_last_busno() + 1;
-	hose->last_busno = 0xff;
-
-	pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80,
-	                         CONFIG_SYS_IMMR + 0x8304 + bus * 0x80);
-
-	pci_register_hose(hose);
-
-	/*
-	 * Write to Command register
-	 */
-	reg16 = 0xff;
-	dev = PCI_BDF(hose->first_busno, 0, 0);
-	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
-	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
-	/*
-	 * Clear non-reserved bits in status register.
-	 */
-	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
-	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
-	printf("PCI:   Bus Dev VenId DevId Class Int\n");
-#endif
-#ifndef CONFIG_PCISLAVE
-	/*
-	 * Hose scan.
-	 */
-	hose->last_busno = pci_hose_scan(hose);
-#endif
-}
-
-/*
- * The caller must have already set OCCR, and the PCI_LAW BARs
- * must have been set to cover all of the requested regions.
- *
- * If fewer than three regions are requested, then the region
- * list is terminated with a region of size 0.
- */
-void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot)
-{
-	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
-	int i;
-
-	if (num_buses > MAX_BUSES) {
-		printf("%d PCI buses requsted, %d supported\n",
-		       num_buses, MAX_BUSES);
-
-		num_buses = MAX_BUSES;
-	}
-
-	pci_num_buses = num_buses;
-
-	/*
-	 * Release PCI RST Output signal.
-	 * Power on to RST high must be at least 100 ms as per PCI spec.
-	 * On warm boots only 1 ms is required.
-	 */
-	udelay(warmboot ? 1000 : 100000);
-
-	for (i = 0; i < num_buses; i++)
-		immr->pci_ctrl[i].gcr = 1;
-
-	/*
-	 * RST high to first config access must be at least 2^25 cycles
-	 * as per PCI spec.  This could be cut in half if we know we're
-	 * running at 66MHz.  This could be insufficiently long if we're
-	 * running the PCI bus at significantly less than 33MHz.
-	 */
-	udelay(1020000);
-
-	for (i = 0; i < num_buses; i++)
-		pci_init_bus(i, reg[i]);
-}
-
-#ifdef CONFIG_PCISLAVE
-
-#define PCI_FUNCTION_CONFIG	0x44
-#define PCI_FUNCTION_CFG_LOCK	0x20
-
-/*
- * Unlock the configuration bit so that the host system can begin booting
- *
- * This should be used after you have:
- * 1) Called mpc83xx_pci_init()
- * 2) Set up your inbound translation windows to the appropriate size
- */
-void mpc83xx_pcislave_unlock(int bus)
-{
-	struct pci_controller *hose = &pci_hose[bus];
-	u32 dev;
-	u16 reg16;
-
-	/* Unlock configuration lock in PCI function configuration register */
-	dev = PCI_BDF(hose->first_busno, 0, 0);
-	pci_hose_read_config_word (hose, dev, PCI_FUNCTION_CONFIG, &reg16);
-	reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
-	pci_hose_write_config_word (hose, dev, PCI_FUNCTION_CONFIG, reg16);
-
-	/* The configuration bit is now unlocked, so we can scan the bus */
-	hose->last_busno = pci_hose_scan(hose);
-}
-#endif
-
-#if defined(CONFIG_OF_LIBFDT)
-void ft_pci_setup(void *blob, bd_t *bd)
-{
-	int nodeoffset;
-	int tmp[2];
-	const char *path;
-
-	if (pci_num_buses < 1)
-		return;
-
-	nodeoffset = fdt_path_offset(blob, "/aliases");
-	if (nodeoffset >= 0) {
-		path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
-		if (path) {
-			tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
-			tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
-			do_fixup_by_path(blob, path, "bus-range",
-				&tmp, sizeof(tmp), 1);
-
-			tmp[0] = cpu_to_be32(gd->pci_clk);
-			do_fixup_by_path(blob, path, "clock-frequency",
-				&tmp, sizeof(tmp[0]), 1);
-		}
-
-		if (pci_num_buses < 2)
-			return;
-
-		path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
-		if (path) {
-			tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
-			tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
-			do_fixup_by_path(blob, path, "bus-range",
-				&tmp, sizeof(tmp), 1);
-
-			tmp[0] = cpu_to_be32(gd->pci_clk);
-			do_fixup_by_path(blob, path, "clock-frequency",
-				&tmp, sizeof(tmp[0]), 1);
-		}
-	}
-}
-#endif /* CONFIG_OF_LIBFDT */
diff --git a/cpu/mpc83xx/pcie.c b/cpu/mpc83xx/pcie.c
deleted file mode 100644
index 77f8906..0000000
--- a/cpu/mpc83xx/pcie.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Copyright (C) 2007-2009  Freescale Semiconductor, Inc.
- * Copyright (C) 2008-2009  MontaVista Software, Inc.
- *
- * Authors: Tony Li <tony.li@freescale.com>
- *          Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <mpc83xx.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PCIE_MAX_BUSES 2
-
-#ifdef CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES
-
-static int mpc83xx_pcie_remap_cfg(struct pci_controller *hose, pci_dev_t dev)
-{
-	int bus = PCI_BUS(dev) - hose->first_busno;
-	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	pex83xx_t *pex = &immr->pciexp[bus];
-	struct pex_outbound_window *out_win = &pex->bridge.pex_outbound_win[0];
-	u8 devfn = PCI_DEV(dev) << 3 | PCI_FUNC(dev);
-	u32 dev_base = bus << 24 | devfn << 16;
-
-	if (hose->indirect_type == INDIRECT_TYPE_NO_PCIE_LINK)
-		return -1;
-	/*
-	 * Workaround for the HW bug: for Type 0 configure transactions the
-	 * PCI-E controller does not check the device number bits and just
-	 * assumes that the device number bits are 0.
-	 */
-	if (devfn & 0xf8)
-		return -1;
-
-	out_le32(&out_win->tarl, dev_base);
-	return 0;
-}
-
-#define cfg_read(val, addr, type, op) \
-	do { *val = op((type)(addr)); } while (0)
-#define cfg_write(val, addr, type, op) \
-	do { op((type *)(addr), (val)); } while (0)
-
-#define cfg_read_err(val) do { *val = -1; } while (0)
-#define cfg_write_err(val) do { } while (0)
-
-#define PCIE_OP(rw, size, type, op)					\
-static int pcie_##rw##_config_##size(struct pci_controller *hose,	\
-				     pci_dev_t dev, int offset,		\
-				     type val)				\
-{									\
-	int ret;							\
-									\
-	ret = mpc83xx_pcie_remap_cfg(hose, dev);			\
-	if (ret) {							\
-		cfg_##rw##_err(val); 					\
-		return ret; 						\
-	}								\
-	cfg_##rw(val, (void *)hose->cfg_addr + offset, type, op);	\
-	return 0;							\
-}
-
-PCIE_OP(read, byte, u8 *, in_8)
-PCIE_OP(read, word, u16 *, in_le16)
-PCIE_OP(read, dword, u32 *, in_le32)
-PCIE_OP(write, byte, u8, out_8)
-PCIE_OP(write, word, u16, out_le16)
-PCIE_OP(write, dword, u32, out_le32)
-
-static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
-				       u8 link)
-{
-	extern void disable_addr_trans(void); /* start.S */
-	static struct pci_controller pcie_hose[PCIE_MAX_BUSES];
-	struct pci_controller *hose = &pcie_hose[bus];
-	int i;
-
-	/*
-	 * There are no spare BATs to remap all PCI-E windows for U-Boot, so
-	 * disable translations. In general, this is not great solution, and
-	 * that's why we don't register PCI-E hoses by default.
-	 */
-	disable_addr_trans();
-
-	for (i = 0; i < 2; i++, reg++) {
-		if (reg->size == 0)
-			break;
-
-		hose->regions[i] = *reg;
-		hose->region_count++;
-	}
-
-	i = hose->region_count++;
-	hose->regions[i].bus_start = 0;
-	hose->regions[i].phys_start = 0;
-	hose->regions[i].size = gd->ram_size;
-	hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
-
-	i = hose->region_count++;
-	hose->regions[i].bus_start = CONFIG_SYS_IMMR;
-	hose->regions[i].phys_start = CONFIG_SYS_IMMR;
-	hose->regions[i].size = 0x100000;
-	hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
-
-	hose->first_busno = pci_last_busno() + 1;
-	hose->last_busno = 0xff;
-
-	if (bus == 0)
-		hose->cfg_addr = (unsigned int *)CONFIG_SYS_PCIE1_CFG_BASE;
-	else
-		hose->cfg_addr = (unsigned int *)CONFIG_SYS_PCIE2_CFG_BASE;
-
-	pci_set_ops(hose,
-			pcie_read_config_byte,
-			pcie_read_config_word,
-			pcie_read_config_dword,
-			pcie_write_config_byte,
-			pcie_write_config_word,
-			pcie_write_config_dword);
-
-	if (!link)
-		hose->indirect_type = INDIRECT_TYPE_NO_PCIE_LINK;
-
-	pci_register_hose(hose);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
-	printf("PCI:   Bus Dev VenId DevId Class Int\n");
-#endif
-	/*
-	 * Hose scan.
-	 */
-	hose->last_busno = pci_hose_scan(hose);
-}
-
-#else
-
-static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
-				       u8 link) {}
-
-#endif /* CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES */
-
-static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg)
-{
-	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	pex83xx_t *pex = &immr->pciexp[bus];
-	struct pex_outbound_window *out_win;
-	struct pex_inbound_window *in_win;
-	void *hose_cfg_base;
-	unsigned int ram_sz;
-	unsigned int barl;
-	unsigned int tar;
-	u16 reg16;
-	int i;
-
-	/* Enable pex csb bridge inbound & outbound transactions */
-	out_le32(&pex->bridge.pex_csb_ctrl,
-		in_le32(&pex->bridge.pex_csb_ctrl) | PEX_CSB_CTRL_OBPIOE |
-		PEX_CSB_CTRL_IBPIOE);
-
-	/* Enable bridge outbound */
-	out_le32(&pex->bridge.pex_csb_obctrl, PEX_CSB_OBCTRL_PIOE |
-		PEX_CSB_OBCTRL_MEMWE | PEX_CSB_OBCTRL_IOWE |
-		PEX_CSB_OBCTRL_CFGWE);
-
-	out_win = &pex->bridge.pex_outbound_win[0];
-	if (bus) {
-		out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG |
-			CONFIG_SYS_PCIE2_CFG_SIZE);
-		out_le32(&out_win->bar, CONFIG_SYS_PCIE2_CFG_BASE);
-	} else {
-		out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG |
-			CONFIG_SYS_PCIE1_CFG_SIZE);
-		out_le32(&out_win->bar, CONFIG_SYS_PCIE1_CFG_BASE);
-	}
-	out_le32(&out_win->tarl, 0);
-	out_le32(&out_win->tarh, 0);
-
-	for (i = 0; i < 2; i++, reg++) {
-		u32 ar;
-
-		if (reg->size == 0)
-			break;
-
-		out_win = &pex->bridge.pex_outbound_win[i + 1];
-		out_le32(&out_win->bar, reg->phys_start);
-		out_le32(&out_win->tarl, reg->bus_start);
-		out_le32(&out_win->tarh, 0);
-		ar = PEX_OWAR_EN | (reg->size & PEX_OWAR_SIZE);
-		if (reg->flags & PCI_REGION_IO)
-			ar |= PEX_OWAR_TYPE_IO;
-		else
-			ar |= PEX_OWAR_TYPE_MEM;
-		out_le32(&out_win->ar, ar);
-	}
-
-	out_le32(&pex->bridge.pex_csb_ibctrl, PEX_CSB_IBCTRL_PIOE);
-
-	ram_sz = gd->ram_size;
-	barl = 0;
-	tar = 0;
-	i = 0;
-	while (ram_sz > 0) {
-		in_win = &pex->bridge.pex_inbound_win[i];
-		out_le32(&in_win->barl, barl);
-		out_le32(&in_win->barh, 0x0);
-		out_le32(&in_win->tar, tar);
-		if (ram_sz >= 0x10000000) {
-			/* The maxium windows size is 256M */
-			out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV |
-				PEX_IWAR_TYPE_PF | 0x0FFFF000);
-			barl += 0x10000000;
-			tar += 0x10000000;
-			ram_sz -= 0x10000000;
-		} else {
-			/* The UM  is not clear here.
-			 * So, round up to even Mb boundary */
-
-			ram_sz = ram_sz >> (20 +
-					((ram_sz & 0xFFFFF) ? 1 : 0));
-			if (!(ram_sz % 2))
-				ram_sz -= 1;
-			out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV |
-				PEX_IWAR_TYPE_PF | (ram_sz << 20) | 0xFF000);
-			ram_sz = 0;
-		}
-		i++;
-	}
-
-	in_win = &pex->bridge.pex_inbound_win[i];
-	out_le32(&in_win->barl, CONFIG_SYS_IMMR);
-	out_le32(&in_win->barh, 0);
-	out_le32(&in_win->tar, CONFIG_SYS_IMMR);
-	out_le32(&in_win->ar, PEX_IWAR_EN |
-		PEX_IWAR_TYPE_NO_PF | PEX_IWAR_SIZE_1M);
-
-	/* Enable the host virtual INTX interrupts */
-	out_le32(&pex->bridge.pex_int_axi_misc_enb,
-		in_le32(&pex->bridge.pex_int_axi_misc_enb) | 0x1E0);
-
-	/* Hose configure header is memory-mapped */
-	hose_cfg_base = (void *)pex;
-
-	get_clocks();
-	/* Configure the PCIE controller core clock ratio */
-	out_le32(hose_cfg_base + PEX_GCLK_RATIO,
-		(((bus ? gd->pciexp2_clk : gd->pciexp1_clk) / 1000000) * 16)
-		/ 333);
-	udelay(1000000);
-
-	/* Do Type 1 bridge configuration */
-	out_8(hose_cfg_base + PCI_PRIMARY_BUS, 0);
-	out_8(hose_cfg_base + PCI_SECONDARY_BUS, 1);
-	out_8(hose_cfg_base + PCI_SUBORDINATE_BUS, 255);
-
-	/*
-	 * Write to Command register
-	 */
-	reg16 = in_le16(hose_cfg_base + PCI_COMMAND);
-	reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO |
-			PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
-	out_le16(hose_cfg_base + PCI_COMMAND, reg16);
-
-	/*
-	 * Clear non-reserved bits in status register.
-	 */
-	out_le16(hose_cfg_base + PCI_STATUS, 0xffff);
-	out_8(hose_cfg_base + PCI_LATENCY_TIMER, 0x80);
-	out_8(hose_cfg_base + PCI_CACHE_LINE_SIZE, 0x08);
-
-	printf("PCIE%d: ", bus);
-
-	reg16 = in_le16(hose_cfg_base + PCI_LTSSM);
-	if (reg16 >= PCI_LTSSM_L0)
-		printf("link\n");
-	else
-		printf("No link\n");
-
-	mpc83xx_pcie_register_hose(bus, reg, reg16 >= PCI_LTSSM_L0);
-}
-
-/*
- * The caller must have already set SCCR, SERDES and the PCIE_LAW BARs
- * must have been set to cover all of the requested regions.
- */
-void mpc83xx_pcie_init(int num_buses, struct pci_region **reg, int warmboot)
-{
-	int i;
-
-	/*
-	 * Release PCI RST Output signal.
-	 * Power on to RST high must be at least 100 ms as per PCI spec.
-	 * On warm boots only 1 ms is required.
-	 */
-	udelay(warmboot ? 1000 : 100000);
-
-	for (i = 0; i < num_buses; i++)
-		mpc83xx_pcie_init_bus(i, reg[i]);
-}
diff --git a/cpu/mpc83xx/qe_io.c b/cpu/mpc83xx/qe_io.c
deleted file mode 100644
index db94f00..0000000
--- a/cpu/mpc83xx/qe_io.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- * based on source code of Shlomi Gridish
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include "common.h"
-#include "asm/errno.h"
-#include "asm/io.h"
-#include "asm/immap_83xx.h"
-
-#define	NUM_OF_PINS	32
-void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
-{
-	u32			pin_2bit_mask;
-	u32			pin_2bit_dir;
-	u32			pin_2bit_assign;
-	u32			pin_1bit_mask;
-	u32			tmp_val;
-	volatile immap_t	*im = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile qepio83xx_t	*par_io = (volatile qepio83xx_t *)&im->qepio;
-
-	/* Caculate pin location and 2bit mask and dir */
-	pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
-	pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
-
-	/* Setup the direction */
-	tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
-		in_be32(&par_io->ioport[port].dir2) :
-		in_be32(&par_io->ioport[port].dir1);
-
-	if (pin > (NUM_OF_PINS/2) -1) {
-		out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val);
-		out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val);
-	} else {
-		out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val);
-		out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val);
-	}
-
-	/* Calculate pin location for 1bit mask */
-	pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
-
-	/* Setup the open drain */
-	tmp_val = in_be32(&par_io->ioport[port].podr);
-	if (open_drain) {
-		out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val);
-	} else {
-		out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val);
-	}
-
-	/* Setup the assignment */
-	tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
-		in_be32(&par_io->ioport[port].ppar2):
-		in_be32(&par_io->ioport[port].ppar1);
-	pin_2bit_assign = (u32)(assign
-				<< (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
-
-	/* Clear and set 2 bits mask */
-	if (pin > (NUM_OF_PINS/2) - 1) {
-		out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val);
-		out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val);
-	} else {
-		out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val);
-		out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val);
-	}
-}
diff --git a/cpu/mpc83xx/serdes.c b/cpu/mpc83xx/serdes.c
deleted file mode 100644
index 64033fe..0000000
--- a/cpu/mpc83xx/serdes.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Freescale SerDes initialization routine
- *
- * Copyright (C) 2007 Freescale Semicondutor, Inc.
- * Copyright (C) 2008 MontaVista Software, Inc.
- *
- * Author: Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-
-/* SerDes registers */
-#define FSL_SRDSCR0_OFFS		0x0
-#define FSL_SRDSCR0_DPP_1V2		0x00008800
-#define FSL_SRDSCR1_OFFS		0x4
-#define FSL_SRDSCR1_PLLBW		0x00000040
-#define FSL_SRDSCR2_OFFS		0x8
-#define FSL_SRDSCR2_VDD_1V2		0x00800000
-#define FSL_SRDSCR2_SEIC_MASK		0x00001c1c
-#define FSL_SRDSCR2_SEIC_SATA		0x00001414
-#define FSL_SRDSCR2_SEIC_PEX		0x00001010
-#define FSL_SRDSCR2_SEIC_SGMII		0x00000101
-#define FSL_SRDSCR3_OFFS		0xc
-#define FSL_SRDSCR3_KFR_SATA		0x10100000
-#define FSL_SRDSCR3_KPH_SATA		0x04040000
-#define FSL_SRDSCR3_SDFM_SATA_PEX	0x01010000
-#define FSL_SRDSCR3_SDTXL_SATA		0x00000505
-#define FSL_SRDSCR4_OFFS		0x10
-#define FSL_SRDSCR4_PROT_SATA		0x00000808
-#define FSL_SRDSCR4_PROT_PEX		0x00000101
-#define FSL_SRDSCR4_PROT_SGMII		0x00000505
-#define FSL_SRDSCR4_PLANE_X2		0x01000000
-#define FSL_SRDSRSTCTL_OFFS		0x20
-#define FSL_SRDSRSTCTL_RST		0x80000000
-#define FSL_SRDSRSTCTL_SATA_RESET	0xf
-
-void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd)
-{
-	void *regs = (void *)CONFIG_SYS_IMMR + offset;
-	u32 tmp;
-
-	/* 1.0V corevdd */
-	if (vdd) {
-		/* DPPE/DPPA = 0 */
-		tmp = in_be32(regs + FSL_SRDSCR0_OFFS);
-		tmp &= ~FSL_SRDSCR0_DPP_1V2;
-		out_be32(regs + FSL_SRDSCR0_OFFS, tmp);
-
-		/* VDD = 0 */
-		tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
-		tmp &= ~FSL_SRDSCR2_VDD_1V2;
-		out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
-	}
-
-	/* protocol specific configuration */
-	switch (proto) {
-	case FSL_SERDES_PROTO_SATA:
-		/* Set and clear reset bits */
-		tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
-		tmp |= FSL_SRDSRSTCTL_SATA_RESET;
-		out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
-		udelay(1000);
-		tmp &= ~FSL_SRDSRSTCTL_SATA_RESET;
-		out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
-
-		/* Configure SRDSCR1 */
-		tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
-		tmp &= ~FSL_SRDSCR1_PLLBW;
-		out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
-
-		/* Configure SRDSCR2 */
-		tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
-		tmp &= ~FSL_SRDSCR2_SEIC_MASK;
-		tmp |= FSL_SRDSCR2_SEIC_SATA;
-		out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
-
-		/* Configure SRDSCR3 */
-		tmp = FSL_SRDSCR3_KFR_SATA | FSL_SRDSCR3_KPH_SATA |
-			FSL_SRDSCR3_SDFM_SATA_PEX |
-			FSL_SRDSCR3_SDTXL_SATA;
-		out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
-
-		/* Configure SRDSCR4 */
-		tmp = rfcks | FSL_SRDSCR4_PROT_SATA;
-		out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
-		break;
-	case FSL_SERDES_PROTO_PEX:
-	case FSL_SERDES_PROTO_PEX_X2:
-		/* Configure SRDSCR1 */
-		tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
-		tmp |= FSL_SRDSCR1_PLLBW;
-		out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
-
-		/* Configure SRDSCR2 */
-		tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
-		tmp &= ~FSL_SRDSCR2_SEIC_MASK;
-		tmp |= FSL_SRDSCR2_SEIC_PEX;
-		out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
-
-		/* Configure SRDSCR3 */
-		tmp = FSL_SRDSCR3_SDFM_SATA_PEX;
-		out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
-
-		/* Configure SRDSCR4 */
-		tmp = rfcks | FSL_SRDSCR4_PROT_PEX;
-		if (proto == FSL_SERDES_PROTO_PEX_X2)
-			tmp |= FSL_SRDSCR4_PLANE_X2;
-		out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
-		break;
-	case FSL_SERDES_PROTO_SGMII:
-		/* Configure SRDSCR1 */
-		tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
-		tmp &= ~FSL_SRDSCR1_PLLBW;
-		out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
-
-		/* Configure SRDSCR2 */
-		tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
-		tmp &= ~FSL_SRDSCR2_SEIC_MASK;
-		tmp |= FSL_SRDSCR2_SEIC_SGMII;
-		out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
-
-		/* Configure SRDSCR3 */
-		out_be32(regs + FSL_SRDSCR3_OFFS, 0);
-
-		/* Configure SRDSCR4 */
-		tmp = rfcks | FSL_SRDSCR4_PROT_SGMII;
-		out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
-		break;
-	default:
-		return;
-	}
-
-	/* Do a software reset */
-	tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
-	tmp |= FSL_SRDSRSTCTL_RST;
-	out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
-}
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
deleted file mode 100644
index 44aaa9a..0000000
--- a/cpu/mpc83xx/spd_sdram.c
+++ /dev/null
@@ -1,918 +0,0 @@
-/*
- * (C) Copyright 2006-2007 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- * (C) Copyright 2003 Motorola Inc.
- * Xianghua Xiao (X.Xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include <spd.h>
-#include <asm/mmu.h>
-#include <spd_sdram.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void board_add_ram_info(int use_default)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-	char buf[32];
-
-	printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK)
-			   >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1);
-
-	if (ddr->sdram_cfg & SDRAM_CFG_32_BE)
-		puts(", 32-bit");
-	else
-		puts(", 64-bit");
-
-	if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
-		puts(", ECC on");
-	else
-		puts(", ECC off");
-
-	printf(", %s MHz)", strmhz(buf, gd->mem_clk));
-
-#if defined(CONFIG_SYS_LB_SDRAM) && defined(CONFIG_SYS_LBC_SDRAM_SIZE)
-	puts("\nSDRAM: ");
-	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)");
-#endif
-}
-
-#ifdef CONFIG_SPD_EEPROM
-#ifndef	CONFIG_SYS_READ_SPD
-#define CONFIG_SYS_READ_SPD	i2c_read
-#endif
-
-/*
- * Convert picoseconds into clock cycles (rounding up if needed).
- */
-int
-picos_to_clk(int picos)
-{
-	unsigned int mem_bus_clk;
-	int clks;
-
-	mem_bus_clk = gd->mem_clk >> 1;
-	clks = picos / (1000000000 / (mem_bus_clk / 1000));
-	if (picos % (1000000000 / (mem_bus_clk / 1000)) != 0)
-		clks++;
-
-	return clks;
-}
-
-unsigned int banksize(unsigned char row_dens)
-{
-	return ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
-}
-
-int read_spd(uint addr)
-{
-	return ((int) addr);
-}
-
-#undef SPD_DEBUG
-#ifdef SPD_DEBUG
-static void spd_debug(spd_eeprom_t *spd)
-{
-	printf ("\nDIMM type:       %-18.18s\n", spd->mpart);
-	printf ("SPD size:        %d\n", spd->info_size);
-	printf ("EEPROM size:     %d\n", 1 << spd->chip_size);
-	printf ("Memory type:     %d\n", spd->mem_type);
-	printf ("Row addr:        %d\n", spd->nrow_addr);
-	printf ("Column addr:     %d\n", spd->ncol_addr);
-	printf ("# of rows:       %d\n", spd->nrows);
-	printf ("Row density:     %d\n", spd->row_dens);
-	printf ("# of banks:      %d\n", spd->nbanks);
-	printf ("Data width:      %d\n",
-			256 * spd->dataw_msb + spd->dataw_lsb);
-	printf ("Chip width:      %d\n", spd->primw);
-	printf ("Refresh rate:    %02X\n", spd->refresh);
-	printf ("CAS latencies:   %02X\n", spd->cas_lat);
-	printf ("Write latencies: %02X\n", spd->write_lat);
-	printf ("tRP:             %d\n", spd->trp);
-	printf ("tRCD:            %d\n", spd->trcd);
-	printf ("\n");
-}
-#endif /* SPD_DEBUG */
-
-long int spd_sdram()
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-	volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
-	spd_eeprom_t spd;
-	unsigned int n_ranks;
-	unsigned int odt_rd_cfg, odt_wr_cfg;
-	unsigned char twr_clk, twtr_clk;
-	unsigned int sdram_type;
-	unsigned int memsize;
-	unsigned int law_size;
-	unsigned char caslat, caslat_ctrl;
-	unsigned int trfc, trfc_clk, trfc_low, trfc_high;
-	unsigned int trcd_clk, trtp_clk;
-	unsigned char cke_min_clk;
-	unsigned char add_lat, wr_lat;
-	unsigned char wr_data_delay;
-	unsigned char four_act;
-	unsigned char cpo;
-	unsigned char burstlen;
-	unsigned char odt_cfg, mode_odt_enable;
-	unsigned int max_bus_clk;
-	unsigned int max_data_rate, effective_data_rate;
-	unsigned int ddrc_clk;
-	unsigned int refresh_clk;
-	unsigned int sdram_cfg;
-	unsigned int ddrc_ecc_enable;
-	unsigned int pvr = get_pvr();
-
-	/*
-	 * First disable the memory controller (could be enabled
-	 * by the debugger)
-	 */
-	clrsetbits_be32(&ddr->sdram_cfg, SDRAM_CFG_MEM_EN, 0);
-	sync();
-	isync();
-
-	/* Read SPD parameters with I2C */
-	CONFIG_SYS_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
-#ifdef SPD_DEBUG
-	spd_debug(&spd);
-#endif
-	/* Check the memory type */
-	if (spd.mem_type != SPD_MEMTYPE_DDR && spd.mem_type != SPD_MEMTYPE_DDR2) {
-		debug("DDR: Module mem type is %02X\n", spd.mem_type);
-		return 0;
-	}
-
-	/* Check the number of physical bank */
-	if (spd.mem_type == SPD_MEMTYPE_DDR) {
-		n_ranks = spd.nrows;
-	} else {
-		n_ranks = (spd.nrows & 0x7) + 1;
-	}
-
-	if (n_ranks > 2) {
-		printf("DDR: The number of physical bank is %02X\n", n_ranks);
-		return 0;
-	}
-
-	/* Check if the number of row of the module is in the range of DDRC */
-	if (spd.nrow_addr < 12 || spd.nrow_addr > 15) {
-		printf("DDR: Row number is out of range of DDRC, row=%02X\n",
-							 spd.nrow_addr);
-		return 0;
-	}
-
-	/* Check if the number of col of the module is in the range of DDRC */
-	if (spd.ncol_addr < 8 || spd.ncol_addr > 11) {
-		printf("DDR: Col number is out of range of DDRC, col=%02X\n",
-							 spd.ncol_addr);
-		return 0;
-	}
-
-#ifdef CONFIG_SYS_DDRCDR_VALUE
-	/*
-	 * Adjust DDR II IO voltage biasing.  It just makes it work.
-	 */
-	if(spd.mem_type == SPD_MEMTYPE_DDR2) {
-		immap->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
-	}
-	udelay(50000);
-#endif
-
-	/*
-	 * ODT configuration recommendation from DDR Controller Chapter.
-	 */
-	odt_rd_cfg = 0;			/* Never assert ODT */
-	odt_wr_cfg = 0;			/* Never assert ODT */
-	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
-		odt_wr_cfg = 1;		/* Assert ODT on writes to CSn */
-	}
-
-	/* Setup DDR chip select register */
-#ifdef CONFIG_SYS_83XX_DDR_USES_CS0
-	ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
-	ddr->cs_config[0] = ( 1 << 31
-			    | (odt_rd_cfg << 20)
-			    | (odt_wr_cfg << 16)
-			    | ((spd.nbanks == 8 ? 1 : 0) << 14)
-			    | ((spd.nrow_addr - 12) << 8)
-			    | (spd.ncol_addr - 8) );
-	debug("\n");
-	debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
-	debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
-
-	if (n_ranks == 2) {
-		ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
-				  | ((banksize(spd.row_dens) >> 23) - 1) );
-		ddr->cs_config[1] = ( 1<<31
-				    | (odt_rd_cfg << 20)
-				    | (odt_wr_cfg << 16)
-				    | ((spd.nbanks == 8 ? 1 : 0) << 14)
-				    | ((spd.nrow_addr - 12) << 8)
-				    | (spd.ncol_addr - 8) );
-		debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
-		debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
-	}
-
-#else
-	ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
-	ddr->cs_config[2] = ( 1 << 31
-			    | (odt_rd_cfg << 20)
-			    | (odt_wr_cfg << 16)
-			    | ((spd.nbanks == 8 ? 1 : 0) << 14)
-			    | ((spd.nrow_addr - 12) << 8)
-			    | (spd.ncol_addr - 8) );
-	debug("\n");
-	debug("cs2_bnds = 0x%08x\n",ddr->csbnds[2].csbnds);
-	debug("cs2_config = 0x%08x\n",ddr->cs_config[2]);
-
-	if (n_ranks == 2) {
-		ddr->csbnds[3].csbnds = ( (banksize(spd.row_dens) >> 8)
-				  | ((banksize(spd.row_dens) >> 23) - 1) );
-		ddr->cs_config[3] = ( 1<<31
-				    | (odt_rd_cfg << 20)
-				    | (odt_wr_cfg << 16)
-				    | ((spd.nbanks == 8 ? 1 : 0) << 14)
-				    | ((spd.nrow_addr - 12) << 8)
-				    | (spd.ncol_addr - 8) );
-		debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds);
-		debug("cs3_config = 0x%08x\n",ddr->cs_config[3]);
-	}
-#endif
-
-	/*
-	 * Figure out memory size in Megabytes.
-	 */
-	memsize = n_ranks * banksize(spd.row_dens) / 0x100000;
-
-	/*
-	 * First supported LAW size is 16M, at LAWAR_SIZE_16M == 23.
-	 */
-	law_size = 19 + __ilog2(memsize);
-
-	/*
-	 * Set up LAWBAR for all of DDR.
-	 */
-	ecm->bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
-	ecm->ar  = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size));
-	debug("DDR:bar=0x%08x\n", ecm->bar);
-	debug("DDR:ar=0x%08x\n", ecm->ar);
-
-	/*
-	 * Find the largest CAS by locating the highest 1 bit
-	 * in the spd.cas_lat field.  Translate it to a DDR
-	 * controller field value:
-	 *
-	 *	CAS Lat	DDR I	DDR II	Ctrl
-	 *	Clocks	SPD Bit	SPD Bit	Value
-	 *	-------	-------	-------	-----
-	 *	1.0	0		0001
-	 *	1.5	1		0010
-	 *	2.0	2	2	0011
-	 *	2.5	3		0100
-	 *	3.0	4	3	0101
-	 *	3.5	5		0110
-	 *	4.0	6	4	0111
-	 *	4.5			1000
-	 *	5.0		5	1001
-	 */
-	caslat = __ilog2(spd.cas_lat);
-	if ((spd.mem_type == SPD_MEMTYPE_DDR)
-	    && (caslat > 6)) {
-		printf("DDR I: Invalid SPD CAS Latency: 0x%x.\n", spd.cas_lat);
-		return 0;
-	} else if (spd.mem_type == SPD_MEMTYPE_DDR2
-		   && (caslat < 2 || caslat > 5)) {
-		printf("DDR II: Invalid SPD CAS Latency: 0x%x.\n",
-		       spd.cas_lat);
-		return 0;
-	}
-	debug("DDR: caslat SPD bit is %d\n", caslat);
-
-	max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
-			+ (spd.clk_cycle & 0x0f));
-	max_data_rate = max_bus_clk * 2;
-
-	debug("DDR:Module maximum data rate is: %d MHz\n", max_data_rate);
-
-	ddrc_clk = gd->mem_clk / 1000000;
-	effective_data_rate = 0;
-
-	if (max_data_rate >= 460) { /* it is DDR2-800, 667, 533 */
-		if (spd.cas_lat & 0x08)
-			caslat = 3;
-		else
-			caslat = 4;
-		if (ddrc_clk <= 460 && ddrc_clk > 350)
-			effective_data_rate = 400;
-		else if (ddrc_clk <=350 && ddrc_clk > 280)
-			effective_data_rate = 333;
-		else if (ddrc_clk <= 280 && ddrc_clk > 230)
-			effective_data_rate = 266;
-		else
-			effective_data_rate = 200;
-	} else if (max_data_rate >= 390 && max_data_rate < 460) { /* it is DDR 400 */
-		if (ddrc_clk <= 460 && ddrc_clk > 350) {
-			/* DDR controller clk at 350~460 */
-			effective_data_rate = 400; /* 5ns */
-			caslat = caslat;
-		} else if (ddrc_clk <= 350 && ddrc_clk > 280) {
-			/* DDR controller clk at 280~350 */
-			effective_data_rate = 333; /* 6ns */
-			if (spd.clk_cycle2 == 0x60)
-				caslat = caslat - 1;
-			else
-				caslat = caslat;
-		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
-			/* DDR controller clk at 230~280 */
-			effective_data_rate = 266; /* 7.5ns */
-			if (spd.clk_cycle3 == 0x75)
-				caslat = caslat - 2;
-			else if (spd.clk_cycle2 == 0x75)
-				caslat = caslat - 1;
-			else
-				caslat = caslat;
-		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDR controller clk at 90~230 */
-			effective_data_rate = 200; /* 10ns */
-			if (spd.clk_cycle3 == 0xa0)
-				caslat = caslat - 2;
-			else if (spd.clk_cycle2 == 0xa0)
-				caslat = caslat - 1;
-			else
-				caslat = caslat;
-		}
-	} else if (max_data_rate >= 323) { /* it is DDR 333 */
-		if (ddrc_clk <= 350 && ddrc_clk > 280) {
-			/* DDR controller clk at 280~350 */
-			effective_data_rate = 333; /* 6ns */
-			caslat = caslat;
-		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
-			/* DDR controller clk at 230~280 */
-			effective_data_rate = 266; /* 7.5ns */
-			if (spd.clk_cycle2 == 0x75)
-				caslat = caslat - 1;
-			else
-				caslat = caslat;
-		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDR controller clk at 90~230 */
-			effective_data_rate = 200; /* 10ns */
-			if (spd.clk_cycle3 == 0xa0)
-				caslat = caslat - 2;
-			else if (spd.clk_cycle2 == 0xa0)
-				caslat = caslat - 1;
-			else
-				caslat = caslat;
-		}
-	} else if (max_data_rate >= 256) { /* it is DDR 266 */
-		if (ddrc_clk <= 350 && ddrc_clk > 280) {
-			/* DDR controller clk at 280~350 */
-			printf("DDR: DDR controller freq is more than "
-				"max data rate of the module\n");
-			return 0;
-		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
-			/* DDR controller clk at 230~280 */
-			effective_data_rate = 266; /* 7.5ns */
-			caslat = caslat;
-		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDR controller clk at 90~230 */
-			effective_data_rate = 200; /* 10ns */
-			if (spd.clk_cycle2 == 0xa0)
-				caslat = caslat - 1;
-		}
-	} else if (max_data_rate >= 190) { /* it is DDR 200 */
-		if (ddrc_clk <= 350 && ddrc_clk > 230) {
-			/* DDR controller clk at 230~350 */
-			printf("DDR: DDR controller freq is more than "
-				"max data rate of the module\n");
-			return 0;
-		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDR controller clk at 90~230 */
-			effective_data_rate = 200; /* 10ns */
-			caslat = caslat;
-		}
-	}
-
-	debug("DDR:Effective data rate is: %dMHz\n", effective_data_rate);
-	debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat);
-
-	/*
-	 * Errata DDR6 work around: input enable 2 cycles earlier.
-	 * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
-	 */
-	if(PVR_MAJ(pvr) <= 1 && spd.mem_type == SPD_MEMTYPE_DDR){
-		if (caslat == 2)
-			ddr->debug_reg = 0x201c0000; /* CL=2 */
-		else if (caslat == 3)
-			ddr->debug_reg = 0x202c0000; /* CL=2.5 */
-		else if (caslat == 4)
-			ddr->debug_reg = 0x202c0000; /* CL=3.0 */
-
-		__asm__ __volatile__ ("sync");
-
-		debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg);
-	}
-
-	/*
-	 * Convert caslat clocks to DDR controller value.
-	 * Force caslat_ctrl to be DDR Controller field-sized.
-	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR) {
-		caslat_ctrl = (caslat + 1) & 0x07;
-	} else {
-		caslat_ctrl =  (2 * caslat - 1) & 0x0f;
-	}
-
-	debug("DDR: effective data rate is %d MHz\n", effective_data_rate);
-	debug("DDR: caslat SPD bit is %d, controller field is 0x%x\n",
-	      caslat, caslat_ctrl);
-
-	/*
-	 * Timing Config 0.
-	 * Avoid writing for DDR I.
-	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
-		unsigned char taxpd_clk = 8;		/* By the book. */
-		unsigned char tmrd_clk = 2;		/* By the book. */
-		unsigned char act_pd_exit = 2;		/* Empirical? */
-		unsigned char pre_pd_exit = 6;		/* Empirical? */
-
-		ddr->timing_cfg_0 = (0
-			| ((act_pd_exit & 0x7) << 20)	/* ACT_PD_EXIT */
-			| ((pre_pd_exit & 0x7) << 16)	/* PRE_PD_EXIT */
-			| ((taxpd_clk & 0xf) << 8)	/* ODT_PD_EXIT */
-			| ((tmrd_clk & 0xf) << 0)	/* MRS_CYC */
-			);
-		debug("DDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
-	}
-
-	/*
-	 * For DDR I, WRREC(Twr) and WRTORD(Twtr) are not in SPD,
-	 * use conservative value.
-	 * For DDR II, they are bytes 36 and 37, in quarter nanos.
-	 */
-
-	if (spd.mem_type == SPD_MEMTYPE_DDR) {
-		twr_clk = 3;	/* Clocks */
-		twtr_clk = 1;	/* Clocks */
-	} else {
-		twr_clk = picos_to_clk(spd.twr * 250);
-		twtr_clk = picos_to_clk(spd.twtr * 250);
-		if (twtr_clk < 2)
-			twtr_clk = 2;
-	}
-
-	/*
-	 * Calculate Trfc, in picos.
-	 * DDR I:  Byte 42 straight up in ns.
-	 * DDR II: Byte 40 and 42 swizzled some, in ns.
-	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR) {
-		trfc = spd.trfc * 1000;		/* up to ps */
-	} else {
-		unsigned int byte40_table_ps[8] = {
-			0,
-			250,
-			330,
-			500,
-			660,
-			750,
-			0,
-			0
-		};
-
-		trfc = (((spd.trctrfc_ext & 0x1) * 256) + spd.trfc) * 1000
-			+ byte40_table_ps[(spd.trctrfc_ext >> 1) & 0x7];
-	}
-	trfc_clk = picos_to_clk(trfc);
-
-	/*
-	 * Trcd, Byte 29, from quarter nanos to ps and clocks.
-	 */
-	trcd_clk = picos_to_clk(spd.trcd * 250) & 0x7;
-
-	/*
-	 * Convert trfc_clk to DDR controller fields.  DDR I should
-	 * fit in the REFREC field (16-19) of TIMING_CFG_1, but the
-	 * 83xx controller has an extended REFREC field of three bits.
-	 * The controller automatically adds 8 clocks to this value,
-	 * so preadjust it down 8 first before splitting it up.
-	 */
-	trfc_low = (trfc_clk - 8) & 0xf;
-	trfc_high = ((trfc_clk - 8) >> 4) & 0x3;
-
-	ddr->timing_cfg_1 =
-	    (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |	/* PRETOACT */
-	     ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) | /* ACTTOPRE */
-	     (trcd_clk << 20 ) |				/* ACTTORW */
-	     (caslat_ctrl << 16 ) |				/* CASLAT */
-	     (trfc_low << 12 ) |				/* REFEC */
-	     ((twr_clk & 0x07) << 8) |				/* WRRREC */
-	     ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) |	/* ACTTOACT */
-	     ((twtr_clk & 0x07) << 0)				/* WRTORD */
-	    );
-
-	/*
-	 * Additive Latency
-	 * For DDR I, 0.
-	 * For DDR II, with ODT enabled, use "a value" less than ACTTORW,
-	 * which comes from Trcd, and also note that:
-	 *	add_lat + caslat must be >= 4
-	 */
-	add_lat = 0;
-	if (spd.mem_type == SPD_MEMTYPE_DDR2
-	    && (odt_wr_cfg || odt_rd_cfg)
-	    && (caslat < 4)) {
-		add_lat = 4 - caslat;
-		if ((add_lat + caslat) < 4) {
-			add_lat = 0;
-		}
-	}
-
-	/*
-	 * Write Data Delay
-	 * Historically 0x2 == 4/8 clock delay.
-	 * Empirically, 0x3 == 6/8 clock delay is suggested for DDR I 266.
-	 */
-	wr_data_delay = 2;
-
-	/*
-	 * Write Latency
-	 * Read to Precharge
-	 * Minimum CKE Pulse Width.
-	 * Four Activate Window
-	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR) {
-		/*
-		 * This is a lie.  It should really be 1, but if it is
-		 * set to 1, bits overlap into the old controller's
-		 * otherwise unused ACSM field.  If we leave it 0, then
-		 * the HW will magically treat it as 1 for DDR 1.  Oh Yea.
-		 */
-		wr_lat = 0;
-
-		trtp_clk = 2;		/* By the book. */
-		cke_min_clk = 1;	/* By the book. */
-		four_act = 1;		/* By the book. */
-
-	} else {
-		wr_lat = caslat - 1;
-
-		/* Convert SPD value from quarter nanos to picos. */
-		trtp_clk = picos_to_clk(spd.trtp * 250);
-		if (trtp_clk < 2)
-			trtp_clk = 2;
-		trtp_clk += add_lat;
-
-		cke_min_clk = 3;	/* By the book. */
-		four_act = picos_to_clk(37500);	/* By the book. 1k pages? */
-	}
-
-	/*
-	 * Empirically set ~MCAS-to-preamble override for DDR 2.
-	 * Your milage will vary.
-	 */
-	cpo = 0;
-	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
-		if (effective_data_rate == 266) {
-			cpo = 0x4;		/* READ_LAT + 1/2 */
-		} else if (effective_data_rate == 333) {
-			cpo = 0x6;		/* READ_LAT + 1 */
-		} else if (effective_data_rate == 400) {
-			cpo = 0x7;		/* READ_LAT + 5/4 */
-		} else {
-			/* Automatic calibration */
-			cpo = 0x1f;
-		}
-	}
-
-	ddr->timing_cfg_2 = (0
-		| ((add_lat & 0x7) << 28)		/* ADD_LAT */
-		| ((cpo & 0x1f) << 23)			/* CPO */
-		| ((wr_lat & 0x7) << 19)		/* WR_LAT */
-		| ((trtp_clk & 0x7) << 13)		/* RD_TO_PRE */
-		| ((wr_data_delay & 0x7) << 10)		/* WR_DATA_DELAY */
-		| ((cke_min_clk & 0x7) << 6)		/* CKE_PLS */
-		| ((four_act & 0x1f) << 0)		/* FOUR_ACT */
-		);
-
-	debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1);
-	debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2);
-
-	/* Check DIMM data bus width */
-	if (spd.dataw_lsb < 64) {
-		if (spd.mem_type == SPD_MEMTYPE_DDR)
-			burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
-		else
-			burstlen = 0x02; /* 32 bit data bus, burst len is 4 */
-		debug("\n   DDR DIMM: data bus width is 32 bit");
-	} else {
-		burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
-		debug("\n   DDR DIMM: data bus width is 64 bit");
-	}
-
-	/* Is this an ECC DDR chip? */
-	if (spd.config == 0x02)
-		debug(" with ECC\n");
-	else
-		debug(" without ECC\n");
-
-	/* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
-	   Burst type is sequential
-	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR) {
-		switch (caslat) {
-		case 1:
-			ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
-			break;
-		case 2:
-			ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
-			break;
-		case 3:
-			ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
-			break;
-		case 4:
-			ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
-			break;
-		default:
-			printf("DDR:only CL 1.5, 2.0, 2.5, 3.0 is supported\n");
-			return 0;
-		}
-	} else {
-		mode_odt_enable = 0x0;                  /* Default disabled */
-		if (odt_wr_cfg || odt_rd_cfg) {
-			/*
-			 * Bits 6 and 2 in Extended MRS(1)
-			 * Bit 2 == 0x04 == 75 Ohm, with 2 DIMM modules.
-			 * Bit 6 == 0x40 == 150 Ohm, with 1 DIMM module.
-			 */
-			mode_odt_enable = 0x40;         /* 150 Ohm */
-		}
-
-		ddr->sdram_mode =
-			(0
-			 | (1 << (16 + 10))             /* DQS Differential disable */
-			 | (add_lat << (16 + 3))        /* Additive Latency in EMRS1 */
-			 | (mode_odt_enable << 16)      /* ODT Enable in EMRS1 */
-			 | ((twr_clk - 1) << 9)         /* Write Recovery Autopre */
-			 | (caslat << 4)                /* caslat */
-			 | (burstlen << 0)              /* Burst length */
-			);
-	}
-	debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
-
-	/*
-	 * Clear EMRS2 and EMRS3.
-	 */
-	ddr->sdram_mode2 = 0;
-	debug("DDR: sdram_mode2 = 0x%08x\n", ddr->sdram_mode2);
-
-	switch (spd.refresh) {
-		case 0x00:
-		case 0x80:
-			refresh_clk = picos_to_clk(15625000);
-			break;
-		case 0x01:
-		case 0x81:
-			refresh_clk = picos_to_clk(3900000);
-			break;
-		case 0x02:
-		case 0x82:
-			refresh_clk = picos_to_clk(7800000);
-			break;
-		case 0x03:
-		case 0x83:
-			refresh_clk = picos_to_clk(31300000);
-			break;
-		case 0x04:
-		case 0x84:
-			refresh_clk = picos_to_clk(62500000);
-			break;
-		case 0x05:
-		case 0x85:
-			refresh_clk = picos_to_clk(125000000);
-			break;
-		default:
-			refresh_clk = 0x512;
-			break;
-	}
-
-	/*
-	 * Set BSTOPRE to 0x100 for page mode
-	 * If auto-charge is used, set BSTOPRE = 0
-	 */
-	ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100;
-	debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
-
-	/*
-	 * SDRAM Cfg 2
-	 */
-	odt_cfg = 0;
-#ifndef CONFIG_NEVER_ASSERT_ODT_TO_CPU
-	if (odt_rd_cfg | odt_wr_cfg) {
-		odt_cfg = 0x2;		/* ODT to IOs during reads */
-	}
-#endif
-	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
-		ddr->sdram_cfg2 = (0
-			    | (0 << 26)	/* True DQS */
-			    | (odt_cfg << 21)	/* ODT only read */
-			    | (1 << 12)	/* 1 refresh at a time */
-			    );
-
-		debug("DDR: sdram_cfg2  = 0x%08x\n", ddr->sdram_cfg2);
-	}
-
-#ifdef CONFIG_SYS_DDR_SDRAM_CLK_CNTL	/* Optional platform specific value */
-	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
-#endif
-	debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
-
-	asm("sync;isync");
-
-	udelay(600);
-
-	/*
-	 * Figure out the settings for the sdram_cfg register. Build up
-	 * the value in 'sdram_cfg' before writing since the write into
-	 * the register will actually enable the memory controller, and all
-	 * settings must be done before enabling.
-	 *
-	 * sdram_cfg[0]   = 1 (ddr sdram logic enable)
-	 * sdram_cfg[1]   = 1 (self-refresh-enable)
-	 * sdram_cfg[5:7] = (SDRAM type = DDR SDRAM)
-	 *			010 DDR 1 SDRAM
-	 *			011 DDR 2 SDRAM
-	 * sdram_cfg[12] = 0 (32_BE =0 , 64 bit bus mode)
-	 * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts)
-	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR)
-		sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1;
-	else
-		sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR2;
-
-	sdram_cfg = (0
-		     | SDRAM_CFG_MEM_EN		/* DDR enable */
-		     | SDRAM_CFG_SREN		/* Self refresh */
-		     | sdram_type		/* SDRAM type */
-		     );
-
-	/* sdram_cfg[3] = RD_EN - registered DIMM enable */
-	if (spd.mod_attr & 0x02)
-		sdram_cfg |= SDRAM_CFG_RD_EN;
-
-	/* The DIMM is 32bit width */
-	if (spd.dataw_lsb < 64) {
-		if (spd.mem_type == SPD_MEMTYPE_DDR)
-			sdram_cfg |= SDRAM_CFG_32_BE | SDRAM_CFG_8_BE;
-		if (spd.mem_type == SPD_MEMTYPE_DDR2)
-			sdram_cfg |= SDRAM_CFG_32_BE;
-	}
-
-	ddrc_ecc_enable = 0;
-
-#if defined(CONFIG_DDR_ECC)
-	/* Enable ECC with sdram_cfg[2] */
-	if (spd.config == 0x02) {
-		sdram_cfg |= 0x20000000;
-		ddrc_ecc_enable = 1;
-		/* disable error detection */
-		ddr->err_disable = ~ECC_ERROR_ENABLE;
-		/* set single bit error threshold to maximum value,
-		 * reset counter to zero */
-		ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
-				(0 << ECC_ERROR_MAN_SBEC_SHIFT);
-	}
-
-	debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
-	debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
-#endif
-	debug("   DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
-
-#if defined(CONFIG_DDR_2T_TIMING)
-	/*
-	 * Enable 2T timing by setting sdram_cfg[16].
-	 */
-	sdram_cfg |= SDRAM_CFG_2T_EN;
-#endif
-	/* Enable controller, and GO! */
-	ddr->sdram_cfg = sdram_cfg;
-	asm("sync;isync");
-	udelay(500);
-
-	debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg);
-	return memsize; /*in MBytes*/
-}
-#endif /* CONFIG_SPD_EEPROM */
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-/*
- * Use timebase counter, get_timer() is not availabe
- * at this point of initialization yet.
- */
-static __inline__ unsigned long get_tbms (void)
-{
-	unsigned long tbl;
-	unsigned long tbu1, tbu2;
-	unsigned long ms;
-	unsigned long long tmp;
-
-	ulong tbclk = get_tbclk();
-
-	/* get the timebase ticks */
-	do {
-		asm volatile ("mftbu %0":"=r" (tbu1):);
-		asm volatile ("mftb %0":"=r" (tbl):);
-		asm volatile ("mftbu %0":"=r" (tbu2):);
-	} while (tbu1 != tbu2);
-
-	/* convert ticks to ms */
-	tmp = (unsigned long long)(tbu1);
-	tmp = (tmp << 32);
-	tmp += (unsigned long long)(tbl);
-	ms = tmp/(tbclk/1000);
-
-	return ms;
-}
-
-/*
- * Initialize all of memory for ECC, then enable errors.
- */
-void ddr_enable_ecc(unsigned int dram_size)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile ddr83xx_t *ddr= &immap->ddr;
-	unsigned long t_start, t_end;
-	register u64 *p;
-	register uint size;
-	unsigned int pattern[2];
-
-	icache_enable();
-	t_start = get_tbms();
-	pattern[0] = 0xdeadbeef;
-	pattern[1] = 0xdeadbeef;
-
-#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
-	dma_meminit(pattern[0], dram_size);
-#else
-	debug("ddr init: CPU FP write method\n");
-	size = dram_size;
-	for (p = 0; p < (u64*)(size); p++) {
-		ppcDWstore((u32*)p, pattern);
-	}
-	__asm__ __volatile__ ("sync");
-#endif
-
-	t_end = get_tbms();
-	icache_disable();
-
-	debug("\nREADY!!\n");
-	debug("ddr init duration: %ld ms\n", t_end - t_start);
-
-	/* Clear All ECC Errors */
-	if ((ddr->err_detect & ECC_ERROR_DETECT_MME) == ECC_ERROR_DETECT_MME)
-		ddr->err_detect |= ECC_ERROR_DETECT_MME;
-	if ((ddr->err_detect & ECC_ERROR_DETECT_MBE) == ECC_ERROR_DETECT_MBE)
-		ddr->err_detect |= ECC_ERROR_DETECT_MBE;
-	if ((ddr->err_detect & ECC_ERROR_DETECT_SBE) == ECC_ERROR_DETECT_SBE)
-		ddr->err_detect |= ECC_ERROR_DETECT_SBE;
-	if ((ddr->err_detect & ECC_ERROR_DETECT_MSE) == ECC_ERROR_DETECT_MSE)
-		ddr->err_detect |= ECC_ERROR_DETECT_MSE;
-
-	/* Disable ECC-Interrupts */
-	ddr->err_int_en &= ECC_ERR_INT_DISABLE;
-
-	/* Enable errors for ECC */
-	ddr->err_disable &= ECC_ERROR_ENABLE;
-
-	__asm__ __volatile__ ("sync");
-	__asm__ __volatile__ ("isync");
-}
-#endif	/* CONFIG_DDR_ECC */
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
deleted file mode 100644
index bde7e92..0000000
--- a/cpu/mpc83xx/speed.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-#include <command.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ----------------------------------------------------------------- */
-
-typedef enum {
-	_unk,
-	_off,
-	_byp,
-	_x8,
-	_x4,
-	_x2,
-	_x1,
-	_1x,
-	_1_5x,
-	_2x,
-	_2_5x,
-	_3x
-} mult_t;
-
-typedef struct {
-	mult_t core_csb_ratio;
-	mult_t vco_divider;
-} corecnf_t;
-
-corecnf_t corecnf_tab[] = {
-	{_byp, _byp},		/* 0x00 */
-	{_byp, _byp},		/* 0x01 */
-	{_byp, _byp},		/* 0x02 */
-	{_byp, _byp},		/* 0x03 */
-	{_byp, _byp},		/* 0x04 */
-	{_byp, _byp},		/* 0x05 */
-	{_byp, _byp},		/* 0x06 */
-	{_byp, _byp},		/* 0x07 */
-	{_1x, _x2},		/* 0x08 */
-	{_1x, _x4},		/* 0x09 */
-	{_1x, _x8},		/* 0x0A */
-	{_1x, _x8},		/* 0x0B */
-	{_1_5x, _x2},		/* 0x0C */
-	{_1_5x, _x4},		/* 0x0D */
-	{_1_5x, _x8},		/* 0x0E */
-	{_1_5x, _x8},		/* 0x0F */
-	{_2x, _x2},		/* 0x10 */
-	{_2x, _x4},		/* 0x11 */
-	{_2x, _x8},		/* 0x12 */
-	{_2x, _x8},		/* 0x13 */
-	{_2_5x, _x2},		/* 0x14 */
-	{_2_5x, _x4},		/* 0x15 */
-	{_2_5x, _x8},		/* 0x16 */
-	{_2_5x, _x8},		/* 0x17 */
-	{_3x, _x2},		/* 0x18 */
-	{_3x, _x4},		/* 0x19 */
-	{_3x, _x8},		/* 0x1A */
-	{_3x, _x8},		/* 0x1B */
-};
-
-/* ----------------------------------------------------------------- */
-
-/*
- *
- */
-int get_clocks(void)
-{
-	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	u32 pci_sync_in;
-	u8 spmf;
-	u8 clkin_div;
-	u32 sccr;
-	u32 corecnf_tab_index;
-	u8 corepll;
-	u32 lcrr;
-
-	u32 csb_clk;
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
-	u32 tsec1_clk;
-	u32 tsec2_clk;
-	u32 usbdr_clk;
-#endif
-#ifdef CONFIG_MPC834x
-	u32 usbmph_clk;
-#endif
-	u32 core_clk;
-	u32 i2c1_clk;
-#if !defined(CONFIG_MPC832x)
-	u32 i2c2_clk;
-#endif
-#if defined(CONFIG_MPC8315)
-	u32 tdm_clk;
-#endif
-#if defined(CONFIG_MPC837x)
-	u32 sdhc_clk;
-#endif
-	u32 enc_clk;
-	u32 lbiu_clk;
-	u32 lclk_clk;
-	u32 mem_clk;
-#if defined(CONFIG_MPC8360)
-	u32 mem_sec_clk;
-#endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
-	u32 qepmf;
-	u32 qepdf;
-	u32 qe_clk;
-	u32 brg_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
-	u32 pciexp1_clk;
-	u32 pciexp2_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
-	u32 sata_clk;
-#endif
-
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
-		return -1;
-
-	clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
-
-	if (im->reset.rcwh & HRCWH_PCI_HOST) {
-#if defined(CONFIG_83XX_CLKIN)
-		pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div);
-#else
-		pci_sync_in = 0xDEADBEEF;
-#endif
-	} else {
-#if defined(CONFIG_83XX_PCICLK)
-		pci_sync_in = CONFIG_83XX_PCICLK;
-#else
-		pci_sync_in = 0xDEADBEEF;
-#endif
-	}
-
-	spmf = ((im->reset.rcwl & HRCWL_SPMF) >> HRCWL_SPMF_SHIFT);
-	csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
-
-	sccr = im->clk.sccr;
-
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
-	switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
-	case 0:
-		tsec1_clk = 0;
-		break;
-	case 1:
-		tsec1_clk = csb_clk;
-		break;
-	case 2:
-		tsec1_clk = csb_clk / 2;
-		break;
-	case 3:
-		tsec1_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_TSEC1CM value */
-		return -2;
-	}
-
-	switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
-	case 0:
-		usbdr_clk = 0;
-		break;
-	case 1:
-		usbdr_clk = csb_clk;
-		break;
-	case 2:
-		usbdr_clk = csb_clk / 2;
-		break;
-	case 3:
-		usbdr_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_USBDRCM value */
-		return -3;
-	}
-#endif
-
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
-	switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
-	case 0:
-		tsec2_clk = 0;
-		break;
-	case 1:
-		tsec2_clk = csb_clk;
-		break;
-	case 2:
-		tsec2_clk = csb_clk / 2;
-		break;
-	case 3:
-		tsec2_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_TSEC2CM value */
-		return -4;
-	}
-#elif defined(CONFIG_MPC8313)
-	tsec2_clk = tsec1_clk;
-
-	if (!(sccr & SCCR_TSEC1ON))
-		tsec1_clk = 0;
-	if (!(sccr & SCCR_TSEC2ON))
-		tsec2_clk = 0;
-#endif
-
-#if defined(CONFIG_MPC834x)
-	switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
-	case 0:
-		usbmph_clk = 0;
-		break;
-	case 1:
-		usbmph_clk = csb_clk;
-		break;
-	case 2:
-		usbmph_clk = csb_clk / 2;
-		break;
-	case 3:
-		usbmph_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_USBMPHCM value */
-		return -5;
-	}
-
-	if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
-		/* if USB MPH clock is not disabled and
-		 * USB DR clock is not disabled then
-		 * USB MPH & USB DR must have the same rate
-		 */
-		return -6;
-	}
-#endif
-	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
-	case 0:
-		enc_clk = 0;
-		break;
-	case 1:
-		enc_clk = csb_clk;
-		break;
-	case 2:
-		enc_clk = csb_clk / 2;
-		break;
-	case 3:
-		enc_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_ENCCM value */
-		return -7;
-	}
-
-#if defined(CONFIG_MPC837x)
-	switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
-	case 0:
-		sdhc_clk = 0;
-		break;
-	case 1:
-		sdhc_clk = csb_clk;
-		break;
-	case 2:
-		sdhc_clk = csb_clk / 2;
-		break;
-	case 3:
-		sdhc_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_SDHCCM value */
-		return -8;
-	}
-#endif
-#if defined(CONFIG_MPC8315)
-	switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) {
-	case 0:
-		tdm_clk = 0;
-		break;
-	case 1:
-		tdm_clk = csb_clk;
-		break;
-	case 2:
-		tdm_clk = csb_clk / 2;
-		break;
-	case 3:
-		tdm_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_TDMCM value */
-		return -8;
-	}
-#endif
-
-#if defined(CONFIG_MPC834x)
-	i2c1_clk = tsec2_clk;
-#elif defined(CONFIG_MPC8360)
-	i2c1_clk = csb_clk;
-#elif defined(CONFIG_MPC832x)
-	i2c1_clk = enc_clk;
-#elif defined(CONFIG_MPC831x)
-	i2c1_clk = enc_clk;
-#elif defined(CONFIG_MPC837x)
-	i2c1_clk = sdhc_clk;
-#endif
-#if !defined(CONFIG_MPC832x)
-	i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
-#endif
-
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
-	switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
-	case 0:
-		pciexp1_clk = 0;
-		break;
-	case 1:
-		pciexp1_clk = csb_clk;
-		break;
-	case 2:
-		pciexp1_clk = csb_clk / 2;
-		break;
-	case 3:
-		pciexp1_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_PCIEXP1CM value */
-		return -9;
-	}
-
-	switch ((sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT) {
-	case 0:
-		pciexp2_clk = 0;
-		break;
-	case 1:
-		pciexp2_clk = csb_clk;
-		break;
-	case 2:
-		pciexp2_clk = csb_clk / 2;
-		break;
-	case 3:
-		pciexp2_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_PCIEXP2CM value */
-		return -10;
-	}
-#endif
-
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
-	switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
-	case 0:
-		sata_clk = 0;
-		break;
-	case 1:
-		sata_clk = csb_clk;
-		break;
-	case 2:
-		sata_clk = csb_clk / 2;
-		break;
-	case 3:
-		sata_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_SATACM value */
-		return -11;
-	}
-#endif
-
-	lbiu_clk = csb_clk *
-	           (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
-	lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
-	switch (lcrr) {
-	case 2:
-	case 4:
-	case 8:
-		lclk_clk = lbiu_clk / lcrr;
-		break;
-	default:
-		/* unknown lcrr */
-		return -12;
-	}
-
-	mem_clk = csb_clk *
-		  (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT));
-	corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT;
-#if defined(CONFIG_MPC8360)
-	mem_sec_clk = csb_clk * (1 +
-		       ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
-#endif
-
-	corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
-	if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
-		/* corecnf_tab_index is too high, possibly worng value */
-		return -11;
-	}
-	switch (corecnf_tab[corecnf_tab_index].core_csb_ratio) {
-	case _byp:
-	case _x1:
-	case _1x:
-		core_clk = csb_clk;
-		break;
-	case _1_5x:
-		core_clk = (3 * csb_clk) / 2;
-		break;
-	case _2x:
-		core_clk = 2 * csb_clk;
-		break;
-	case _2_5x:
-		core_clk = (5 * csb_clk) / 2;
-		break;
-	case _3x:
-		core_clk = 3 * csb_clk;
-		break;
-	default:
-		/* unkown core to csb ratio */
-		return -13;
-	}
-
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
-	qepmf = (im->reset.rcwl & HRCWL_CEPMF) >> HRCWL_CEPMF_SHIFT;
-	qepdf = (im->reset.rcwl & HRCWL_CEPDF) >> HRCWL_CEPDF_SHIFT;
-	qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
-	brg_clk = qe_clk / 2;
-#endif
-
-	gd->csb_clk = csb_clk;
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
-	gd->tsec1_clk = tsec1_clk;
-	gd->tsec2_clk = tsec2_clk;
-	gd->usbdr_clk = usbdr_clk;
-#endif
-#if defined(CONFIG_MPC834x)
-	gd->usbmph_clk = usbmph_clk;
-#endif
-#if defined(CONFIG_MPC8315)
-	gd->tdm_clk = tdm_clk;
-#endif
-#if defined(CONFIG_MPC837x)
-	gd->sdhc_clk = sdhc_clk;
-#endif
-	gd->core_clk = core_clk;
-	gd->i2c1_clk = i2c1_clk;
-#if !defined(CONFIG_MPC832x)
-	gd->i2c2_clk = i2c2_clk;
-#endif
-	gd->enc_clk = enc_clk;
-	gd->lbiu_clk = lbiu_clk;
-	gd->lclk_clk = lclk_clk;
-	gd->mem_clk = mem_clk;
-#if defined(CONFIG_MPC8360)
-	gd->mem_sec_clk = mem_sec_clk;
-#endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
-	gd->qe_clk = qe_clk;
-	gd->brg_clk = brg_clk;
-#endif
-#if defined(CONFIG_MPC837x)
-	gd->pciexp1_clk = pciexp1_clk;
-	gd->pciexp2_clk = pciexp2_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
-	gd->sata_clk = sata_clk;
-#endif
-	gd->pci_clk = pci_sync_in;
-	gd->cpu_clk = gd->core_clk;
-	gd->bus_clk = gd->csb_clk;
-	return 0;
-
-}
-
-/********************************************
- * get_bus_freq
- * return system bus freq in Hz
- *********************************************/
-ulong get_bus_freq(ulong dummy)
-{
-	return gd->csb_clk;
-}
-
-int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	char buf[32];
-
-	printf("Clock configuration:\n");
-	printf("  Core:                %-4s MHz\n", strmhz(buf, gd->core_clk));
-	printf("  Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
-	printf("  QE:                  %-4s MHz\n", strmhz(buf, gd->qe_clk));
-	printf("  BRG:                 %-4s MHz\n", strmhz(buf, gd->brg_clk));
-#endif
-	printf("  Local Bus Controller:%-4s MHz\n", strmhz(buf, gd->lbiu_clk));
-	printf("  Local Bus:           %-4s MHz\n", strmhz(buf, gd->lclk_clk));
-	printf("  DDR:                 %-4s MHz\n", strmhz(buf, gd->mem_clk));
-#if defined(CONFIG_MPC8360)
-	printf("  DDR Secondary:       %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
-#endif
-	printf("  SEC:                 %-4s MHz\n", strmhz(buf, gd->enc_clk));
-	printf("  I2C1:                %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
-#if !defined(CONFIG_MPC832x)
-	printf("  I2C2:                %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
-#endif
-#if defined(CONFIG_MPC8315)
-	printf("  TDM:                 %-4s MHz\n", strmhz(buf, gd->tdm_clk));
-#endif
-#if defined(CONFIG_MPC837x)
-	printf("  SDHC:                %-4s MHz\n", strmhz(buf, gd->sdhc_clk));
-#endif
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
-	printf("  TSEC1:               %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
-	printf("  TSEC2:               %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
-	printf("  USB DR:              %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
-#endif
-#if defined(CONFIG_MPC834x)
-	printf("  USB MPH:             %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
-#endif
-#if defined(CONFIG_MPC837x)
-	printf("  PCIEXP1:             %-4s MHz\n", strmhz(buf, gd->pciexp1_clk));
-	printf("  PCIEXP2:             %-4s MHz\n", strmhz(buf, gd->pciexp2_clk));
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
-	printf("  SATA:                %-4s MHz\n", strmhz(buf, gd->sata_clk));
-#endif
-	return 0;
-}
-
-U_BOOT_CMD(clocks, 1, 0, do_clocks,
-	"print clock configuration",
-	"    clocks"
-);
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
deleted file mode 100644
index 68bb620..0000000
--- a/cpu/mpc83xx/start.S
+++ /dev/null
@@ -1,1207 +0,0 @@
-/*
- * Copyright (C) 1998  Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999  Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright Freescale Semiconductor, Inc. 2004, 2006, 2008.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- *  U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards
- */
-
-#include <config.h>
-#include <mpc83xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_83XX	1		/* needed for Linux kernel header files*/
-#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef  CONFIG_IDENT_STRING
-#define  CONFIG_IDENT_STRING "MPC83XX"
-#endif
-
-/* We don't want the  MMU yet.
- */
-#undef	MSR_KERNEL
-
-/*
- * Floating Point enable, Machine Check and Recoverable Interr.
- */
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SYS_RAMBOOT)
-#define CONFIG_SYS_FLASHBOOT
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
-	START_GOT
-	GOT_ENTRY(_GOT2_TABLE_)
-	GOT_ENTRY(__bss_start)
-	GOT_ENTRY(_end)
-
-#ifndef CONFIG_NAND_SPL
-	GOT_ENTRY(_FIXUP_TABLE_)
-	GOT_ENTRY(_start)
-	GOT_ENTRY(_start_of_vectors)
-	GOT_ENTRY(_end_of_vectors)
-	GOT_ENTRY(transfer_to_handler)
-#endif
-	END_GOT
-
-/*
- * The Hard Reset Configuration Word (HRCW) table is in the first 64
- * (0x40) bytes of flash.  It has 8 bytes, but each byte is repeated 8
- * times so the processor can fetch it out of flash whether the flash
- * is 8, 16, 32, or 64 bits wide (hardware trickery).
- */
-	.text
-#define _HRCW_TABLE_ENTRY(w)		\
-	.fill	8,1,(((w)>>24)&0xff);	\
-	.fill	8,1,(((w)>>16)&0xff);	\
-	.fill	8,1,(((w)>> 8)&0xff);	\
-	.fill	8,1,(((w)    )&0xff)
-
-	_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_LOW)
-	_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_HIGH)
-
-/*
- * Magic number and version string - put it after the HRCW since it
- * cannot be first in flash like it is in many other processors.
- */
-	.long	0x27051956		/* U-Boot Magic Number */
-
-	.globl	version_string
-version_string:
-	.ascii U_BOOT_VERSION
-	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
-	.ascii " ", CONFIG_IDENT_STRING, "\0"
-
-	.align 2
-
-	.globl enable_addr_trans
-enable_addr_trans:
-	/* enable address translation */
-	mfmsr	r5
-	ori	r5, r5, (MSR_IR | MSR_DR)
-	mtmsr	r5
-	isync
-	blr
-
-	.globl disable_addr_trans
-disable_addr_trans:
-	/* disable address translation */
-	mflr	r4
-	mfmsr	r3
-	andi.	r0, r3, (MSR_IR | MSR_DR)
-	beqlr
-	andc	r3, r3, r0
-	mtspr	SRR0, r4
-	mtspr	SRR1, r3
-	rfi
-
-	.globl get_pvr
-get_pvr:
-	mfspr	r3, PVR
-	blr
-
-	.globl	ppcDWstore
-ppcDWstore:
-	lfd	1, 0(r4)
-	stfd	1, 0(r3)
-	blr
-
-	.globl	ppcDWload
-ppcDWload:
-	lfd	1, 0(r3)
-	stfd	1, 0(r4)
-	blr
-
-#ifndef CONFIG_DEFAULT_IMMR
-#error CONFIG_DEFAULT_IMMR must be defined
-#endif /* CONFIG_SYS_DEFAULT_IMMR */
-#ifndef CONFIG_SYS_IMMR
-#define CONFIG_SYS_IMMR CONFIG_DEFAULT_IMMR
-#endif /* CONFIG_SYS_IMMR */
-
-/*
- * After configuration, a system reset exception is executed using the
- * vector at offset 0x100 relative to the base set by MSR[IP]. If
- * MSR[IP] is 0, the base address is 0x00000000. If MSR[IP] is 1, the
- * base address is 0xfff00000. In the case of a Power On Reset or Hard
- * Reset, the value of MSR[IP] is determined by the CIP field in the
- * HRCW.
- *
- * Other bits in the HRCW set up the Base Address and Port Size in BR0.
- * This determines the location of the boot ROM (flash or EPROM) in the
- * processor's address space at boot time. As long as the HRCW is set up
- * so that we eventually end up executing the code below when the
- * processor executes the reset exception, the actual values used should
- * not matter.
- *
- * Once we have got here, the address mask in OR0 is cleared so that the
- * bottom 32K of the boot ROM is effectively repeated all throughout the
- * processor's address space, after which we can jump to the absolute
- * address at which the boot ROM was linked at compile time, and proceed
- * to initialise the memory controller without worrying if the rug will
- * be pulled out from under us, so to speak (it will be fine as long as
- * we configure BR0 with the same boot ROM link address).
- */
-	. = EXC_OFF_SYS_RESET
-
-	.globl	_start
-_start: /* time t 0 */
-	li	r21, BOOTFLAG_COLD  /* Normal Power-On: Boot from FLASH*/
-	nop
-	b	boot_cold
-
-	. = EXC_OFF_SYS_RESET + 0x10
-
-	.globl	_start_warm
-_start_warm:
-	li	r21, BOOTFLAG_WARM	/* Software reboot	*/
-	b	boot_warm
-
-
-boot_cold: /* time t 3 */
-	lis	r4, CONFIG_DEFAULT_IMMR@h
-	nop
-boot_warm: /* time t 5 */
-	mfmsr	r5			/* save msr contents	*/
-
-	/* 83xx manuals prescribe a specific sequence for updating IMMRBAR. */
-	bl	1f
-1:	mflr	r7
-
-	lis	r3, CONFIG_SYS_IMMR@h
-	ori	r3, r3, CONFIG_SYS_IMMR@l
-
-	lwz	r6, IMMRBAR(r4)
-	isync
-
-	stw	r3, IMMRBAR(r4)
-	lwz	r6, 0(r7)		/* Arbitrary external load */
-	isync
-
-	lwz	r6, IMMRBAR(r3)
-	isync
-
-	/* Initialise the E300 processor core		*/
-	/*------------------------------------------*/
-
-#ifdef CONFIG_NAND_SPL
-	/* The FCM begins execution after only the first page
-	 * is loaded.  Wait for the rest before branching
-	 * to another flash page.
-	 */
-1:	lwz	r6, 0x50b0(r3)
-	andi.	r6, r6, 1
-	beq	1b
-#endif
-
-	bl	init_e300_core
-
-#ifdef CONFIG_SYS_FLASHBOOT
-
-	/* Inflate flash location so it appears everywhere, calculate */
-	/* the absolute address in final location of the FLASH, jump  */
-	/* there and deflate the flash size back to minimal size      */
-	/*------------------------------------------------------------*/
-	bl map_flash_by_law1
-	lis r4, (CONFIG_SYS_MONITOR_BASE)@h
-	ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l
-	addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
-	mtlr r5
-	blr
-in_flash:
-#if 1 /* Remapping flash with LAW0. */
-	bl remap_flash_by_law0
-#endif
-#endif	/* CONFIG_SYS_FLASHBOOT */
-
-	/* setup the bats */
-	bl	setup_bats
-	sync
-
-	/*
-	 * Cache must be enabled here for stack-in-cache trick.
-	 * This means we need to enable the BATS.
-	 * This means:
-	 *   1) for the EVB, original gt regs need to be mapped
-	 *   2) need to have an IBAT for the 0xf region,
-	 *      we are running there!
-	 * Cache should be turned on after BATs, since by default
-	 * everything is write-through.
-	 * The init-mem BAT can be reused after reloc. The old
-	 * gt-regs BAT can be reused after board_init_f calls
-	 * board_early_init_f (EVB only).
-	 */
-	/* enable address translation */
-	bl	enable_addr_trans
-	sync
-
-	/* enable the data cache */
-	bl	dcache_enable
-	sync
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
-	bl	lock_ram_in_cache
-	sync
-#endif
-
-	/* set up the stack pointer in our newly created
-	 * cache-ram (r1) */
-	lis	r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
-	ori	r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
-	li	r0, 0		/* Make room for stack frame header and	*/
-	stwu	r0, -4(r1)	/* clear final stack frame so that	*/
-	stwu	r0, -4(r1)	/* stack backtraces terminate cleanly	*/
-
-
-	/* let the C-code set up the rest	                    */
-	/*				                            */
-	/* Be careful to keep code relocatable & stack humble   */
-	/*------------------------------------------------------*/
-
-	GET_GOT			/* initialize GOT access	*/
-
-	/* r3: IMMR */
-	lis	r3, CONFIG_SYS_IMMR@h
-	/* run low-level CPU init code (in Flash)*/
-	bl	cpu_init_f
-
-	/* r3: BOOTFLAG */
-	mr	r3, r21
-	/* run 1st part of board init code (in Flash)*/
-	bl	board_init_f
-
-#ifndef CONFIG_NAND_SPL
-/*
- * Vector Table
- */
-
-	.globl	_start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
-	STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
-	STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
-	STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
-#ifndef FIXME
-	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-#endif
-
-/* Alignment exception. */
-	. = 0x600
-Alignment:
-	EXCEPTION_PROLOG(SRR0, SRR1)
-	mfspr	r4,DAR
-	stw	r4,_DAR(r21)
-	mfspr	r5,DSISR
-	stw	r5,_DSISR(r21)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
-	. = 0x700
-ProgramCheck:
-	EXCEPTION_PROLOG(SRR0, SRR1)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
-		MSR_KERNEL, COPY_EE)
-
-	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
-	/* I guess we could implement decrementer, and may have
-	 * to someday for timekeeping.
-	 */
-	STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
-	STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
-	STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
-	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-	STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
-	STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
-	STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
-	STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
-	STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
-	STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-#ifdef DEBUG
-	. = 0x1300
-	/*
-	 * This exception occurs when the program counter matches the
-	 * Instruction Address Breakpoint Register (IABR).
-	 *
-	 * I want the cpu to halt if this occurs so I can hunt around
-	 * with the debugger and look at things.
-	 *
-	 * When DEBUG is defined, both machine check enable (in the MSR)
-	 * and checkstop reset enable (in the reset mode register) are
-	 * turned off and so a checkstop condition will result in the cpu
-	 * halting.
-	 *
-	 * I force the cpu into a checkstop condition by putting an illegal
-	 * instruction here (at least this is the theory).
-	 *
-	 * well - that didnt work, so just do an infinite loop!
-	 */
-1:	b	1b
-#else
-	STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
-#endif
-	STD_EXCEPTION(0x1400, SMI, UnknownException)
-
-	STD_EXCEPTION(0x1500, Trap_15, UnknownException)
-	STD_EXCEPTION(0x1600, Trap_16, UnknownException)
-	STD_EXCEPTION(0x1700, Trap_17, UnknownException)
-	STD_EXCEPTION(0x1800, Trap_18, UnknownException)
-	STD_EXCEPTION(0x1900, Trap_19, UnknownException)
-	STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
-	STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
-	STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
-	STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
-	STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
-	STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
-	STD_EXCEPTION(0x2000, Trap_20, UnknownException)
-	STD_EXCEPTION(0x2100, Trap_21, UnknownException)
-	STD_EXCEPTION(0x2200, Trap_22, UnknownException)
-	STD_EXCEPTION(0x2300, Trap_23, UnknownException)
-	STD_EXCEPTION(0x2400, Trap_24, UnknownException)
-	STD_EXCEPTION(0x2500, Trap_25, UnknownException)
-	STD_EXCEPTION(0x2600, Trap_26, UnknownException)
-	STD_EXCEPTION(0x2700, Trap_27, UnknownException)
-	STD_EXCEPTION(0x2800, Trap_28, UnknownException)
-	STD_EXCEPTION(0x2900, Trap_29, UnknownException)
-	STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
-	STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
-	STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
-	STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
-	STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
-	STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
-
-
-	.globl	_end_of_vectors
-_end_of_vectors:
-
-	. = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
-	.globl	transfer_to_handler
-transfer_to_handler:
-	stw	r22,_NIP(r21)
-	lis	r22,MSR_POW@h
-	andc	r23,r23,r22
-	stw	r23,_MSR(r21)
-	SAVE_GPR(7, r21)
-	SAVE_4GPRS(8, r21)
-	SAVE_8GPRS(12, r21)
-	SAVE_8GPRS(24, r21)
-	mflr	r23
-	andi.	r24,r23,0x3f00		/* get vector offset */
-	stw	r24,TRAP(r21)
-	li	r22,0
-	stw	r22,RESULT(r21)
-	lwz	r24,0(r23)		/* virtual address of handler */
-	lwz	r23,4(r23)		/* where to go when done */
-	mtspr	SRR0,r24
-	mtspr	SRR1,r20
-	mtlr	r23
-	SYNC
-	rfi				/* jump to handler, enable MMU */
-
-int_return:
-	mfmsr	r28		/* Disable interrupts */
-	li	r4,0
-	ori	r4,r4,MSR_EE
-	andc	r28,r28,r4
-	SYNC			/* Some chip revs need this... */
-	mtmsr	r28
-	SYNC
-	lwz	r2,_CTR(r1)
-	lwz	r0,_LINK(r1)
-	mtctr	r2
-	mtlr	r0
-	lwz	r2,_XER(r1)
-	lwz	r0,_CCR(r1)
-	mtspr	XER,r2
-	mtcrf	0xFF,r0
-	REST_10GPRS(3, r1)
-	REST_10GPRS(13, r1)
-	REST_8GPRS(23, r1)
-	REST_GPR(31, r1)
-	lwz	r2,_NIP(r1)	/* Restore environment */
-	lwz	r0,_MSR(r1)
-	mtspr	SRR0,r2
-	mtspr	SRR1,r0
-	lwz	r0,GPR0(r1)
-	lwz	r2,GPR2(r1)
-	lwz	r1,GPR1(r1)
-	SYNC
-	rfi
-#endif /* !CONFIG_NAND_SPL */
-
-/*
- * This code initialises the E300 processor core
- * (conforms to PowerPC 603e spec)
- * Note: expects original MSR contents to be in r5.
- */
-	.globl	init_e300_core
-init_e300_core: /* time t 10 */
-	/* Initialize machine status; enable machine check interrupt */
-	/*-----------------------------------------------------------*/
-
-	li	r3, MSR_KERNEL			/* Set ME and RI flags */
-	rlwimi	r3, r5, 0, 25, 25	/* preserve IP bit set by HRCW */
-#ifdef DEBUG
-	rlwimi	r3, r5, 0, 21, 22   /* debugger might set SE & BE bits */
-#endif
-	SYNC						/* Some chip revs need this... */
-	mtmsr	r3
-	SYNC
-	mtspr	SRR1, r3			/* Make SRR1 match MSR */
-
-
-	lis	r3, CONFIG_SYS_IMMR@h
-#if defined(CONFIG_WATCHDOG)
-	/* Initialise the Wathcdog values and reset it (if req) */
-	/*------------------------------------------------------*/
-	lis r4, CONFIG_SYS_WATCHDOG_VALUE
-	ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
-	stw r4, SWCRR(r3)
-
-	/* and reset it */
-
-	li	r4, 0x556C
-	sth	r4, SWSRR@l(r3)
-	li	r4, -0x55C7
-	sth	r4, SWSRR@l(r3)
-#else
-	/* Disable Wathcdog  */
-	/*-------------------*/
-	lwz r4, SWCRR(r3)
-	/* Check to see if its enabled for disabling
-	   once disabled by SW you can't re-enable */
-	andi. r4, r4, 0x4
-	beq 1f
-	xor r4, r4, r4
-	stw r4, SWCRR(r3)
-1:
-#endif /* CONFIG_WATCHDOG */
-
-#if defined(CONFIG_MASK_AER_AO)
-	/* Write the Arbiter Event Enable to mask Address Only traps. */
-	/* This prevents the dcbz instruction from being trapped when */
-	/* HID0_ABE Address Broadcast Enable is set and the MEMORY    */
-	/* COHERENCY bit is set in the WIMG bits, which is often      */
-	/* needed for PCI operation.                                  */
-	lwz	r4, 0x0808(r3)
-	rlwinm	r0, r4, 0, ~AER_AO
-	stw	r0, 0x0808(r3)
-#endif /* CONFIG_MASK_AER_AO */
-
-	/* Initialize the Hardware Implementation-dependent Registers */
-	/* HID0 also contains cache control			*/
-	/* - force invalidation of data and instruction caches  */
-	/*------------------------------------------------------*/
-
-	lis	r3, CONFIG_SYS_HID0_INIT@h
-	ori	r3, r3, (CONFIG_SYS_HID0_INIT | HID0_ICFI | HID0_DCFI)@l
-	SYNC
-	mtspr	HID0, r3
-
-	lis	r3, CONFIG_SYS_HID0_FINAL@h
-	ori	r3, r3, (CONFIG_SYS_HID0_FINAL & ~(HID0_ICFI | HID0_DCFI))@l
-	SYNC
-	mtspr	HID0, r3
-
-	lis	r3, CONFIG_SYS_HID2@h
-	ori	r3, r3, CONFIG_SYS_HID2@l
-	SYNC
-	mtspr	HID2, r3
-
-	/* Done!						*/
-	/*------------------------------*/
-	blr
-
-	/* setup_bats - set them up to some initial state */
-	.globl	setup_bats
-setup_bats:
-	addis	r0, r0, 0x0000
-
-	/* IBAT 0 */
-	addis	r4, r0, CONFIG_SYS_IBAT0L@h
-	ori	r4, r4, CONFIG_SYS_IBAT0L@l
-	addis	r3, r0, CONFIG_SYS_IBAT0U@h
-	ori	r3, r3, CONFIG_SYS_IBAT0U@l
-	mtspr	IBAT0L, r4
-	mtspr	IBAT0U, r3
-
-	/* DBAT 0 */
-	addis	r4, r0, CONFIG_SYS_DBAT0L@h
-	ori	r4, r4, CONFIG_SYS_DBAT0L@l
-	addis	r3, r0, CONFIG_SYS_DBAT0U@h
-	ori	r3, r3, CONFIG_SYS_DBAT0U@l
-	mtspr	DBAT0L, r4
-	mtspr	DBAT0U, r3
-
-	/* IBAT 1 */
-	addis	r4, r0, CONFIG_SYS_IBAT1L@h
-	ori	r4, r4, CONFIG_SYS_IBAT1L@l
-	addis	r3, r0, CONFIG_SYS_IBAT1U@h
-	ori	r3, r3, CONFIG_SYS_IBAT1U@l
-	mtspr	IBAT1L, r4
-	mtspr	IBAT1U, r3
-
-	/* DBAT 1 */
-	addis	r4, r0, CONFIG_SYS_DBAT1L@h
-	ori	r4, r4, CONFIG_SYS_DBAT1L@l
-	addis	r3, r0, CONFIG_SYS_DBAT1U@h
-	ori	r3, r3, CONFIG_SYS_DBAT1U@l
-	mtspr	DBAT1L, r4
-	mtspr	DBAT1U, r3
-
-	/* IBAT 2 */
-	addis	r4, r0, CONFIG_SYS_IBAT2L@h
-	ori	r4, r4, CONFIG_SYS_IBAT2L@l
-	addis	r3, r0, CONFIG_SYS_IBAT2U@h
-	ori	r3, r3, CONFIG_SYS_IBAT2U@l
-	mtspr	IBAT2L, r4
-	mtspr	IBAT2U, r3
-
-	/* DBAT 2 */
-	addis	r4, r0, CONFIG_SYS_DBAT2L@h
-	ori	r4, r4, CONFIG_SYS_DBAT2L@l
-	addis	r3, r0, CONFIG_SYS_DBAT2U@h
-	ori	r3, r3, CONFIG_SYS_DBAT2U@l
-	mtspr	DBAT2L, r4
-	mtspr	DBAT2U, r3
-
-	/* IBAT 3 */
-	addis	r4, r0, CONFIG_SYS_IBAT3L@h
-	ori	r4, r4, CONFIG_SYS_IBAT3L@l
-	addis	r3, r0, CONFIG_SYS_IBAT3U@h
-	ori	r3, r3, CONFIG_SYS_IBAT3U@l
-	mtspr	IBAT3L, r4
-	mtspr	IBAT3U, r3
-
-	/* DBAT 3 */
-	addis	r4, r0, CONFIG_SYS_DBAT3L@h
-	ori	r4, r4, CONFIG_SYS_DBAT3L@l
-	addis	r3, r0, CONFIG_SYS_DBAT3U@h
-	ori	r3, r3, CONFIG_SYS_DBAT3U@l
-	mtspr	DBAT3L, r4
-	mtspr	DBAT3U, r3
-
-#ifdef CONFIG_HIGH_BATS
-	/* IBAT 4 */
-	addis   r4, r0, CONFIG_SYS_IBAT4L@h
-	ori     r4, r4, CONFIG_SYS_IBAT4L@l
-	addis   r3, r0, CONFIG_SYS_IBAT4U@h
-	ori     r3, r3, CONFIG_SYS_IBAT4U@l
-	mtspr   IBAT4L, r4
-	mtspr   IBAT4U, r3
-
-	/* DBAT 4 */
-	addis   r4, r0, CONFIG_SYS_DBAT4L@h
-	ori     r4, r4, CONFIG_SYS_DBAT4L@l
-	addis   r3, r0, CONFIG_SYS_DBAT4U@h
-	ori     r3, r3, CONFIG_SYS_DBAT4U@l
-	mtspr   DBAT4L, r4
-	mtspr   DBAT4U, r3
-
-	/* IBAT 5 */
-	addis   r4, r0, CONFIG_SYS_IBAT5L@h
-	ori     r4, r4, CONFIG_SYS_IBAT5L@l
-	addis   r3, r0, CONFIG_SYS_IBAT5U@h
-	ori     r3, r3, CONFIG_SYS_IBAT5U@l
-	mtspr   IBAT5L, r4
-	mtspr   IBAT5U, r3
-
-	/* DBAT 5 */
-	addis   r4, r0, CONFIG_SYS_DBAT5L@h
-	ori     r4, r4, CONFIG_SYS_DBAT5L@l
-	addis   r3, r0, CONFIG_SYS_DBAT5U@h
-	ori     r3, r3, CONFIG_SYS_DBAT5U@l
-	mtspr   DBAT5L, r4
-	mtspr   DBAT5U, r3
-
-	/* IBAT 6 */
-	addis   r4, r0, CONFIG_SYS_IBAT6L@h
-	ori     r4, r4, CONFIG_SYS_IBAT6L@l
-	addis   r3, r0, CONFIG_SYS_IBAT6U@h
-	ori     r3, r3, CONFIG_SYS_IBAT6U@l
-	mtspr   IBAT6L, r4
-	mtspr   IBAT6U, r3
-
-	/* DBAT 6 */
-	addis   r4, r0, CONFIG_SYS_DBAT6L@h
-	ori     r4, r4, CONFIG_SYS_DBAT6L@l
-	addis   r3, r0, CONFIG_SYS_DBAT6U@h
-	ori     r3, r3, CONFIG_SYS_DBAT6U@l
-	mtspr   DBAT6L, r4
-	mtspr   DBAT6U, r3
-
-	/* IBAT 7 */
-	addis   r4, r0, CONFIG_SYS_IBAT7L@h
-	ori     r4, r4, CONFIG_SYS_IBAT7L@l
-	addis   r3, r0, CONFIG_SYS_IBAT7U@h
-	ori     r3, r3, CONFIG_SYS_IBAT7U@l
-	mtspr   IBAT7L, r4
-	mtspr   IBAT7U, r3
-
-	/* DBAT 7 */
-	addis   r4, r0, CONFIG_SYS_DBAT7L@h
-	ori     r4, r4, CONFIG_SYS_DBAT7L@l
-	addis   r3, r0, CONFIG_SYS_DBAT7U@h
-	ori     r3, r3, CONFIG_SYS_DBAT7U@l
-	mtspr   DBAT7L, r4
-	mtspr   DBAT7U, r3
-#endif
-
-	isync
-
-	/* invalidate all tlb's
-	 *
-	 * From the 603e User Manual: "The 603e provides the ability to
-	 * invalidate a TLB entry. The TLB Invalidate Entry (tlbie)
-	 * instruction invalidates the TLB entry indexed by the EA, and
-	 * operates on both the instruction and data TLBs simultaneously
-	 * invalidating four TLB entries (both sets in each TLB). The
-	 * index corresponds to bits 15-19 of the EA. To invalidate all
-	 * entries within both TLBs, 32 tlbie instructions should be
-	 * issued, incrementing this field by one each time."
-	 *
-	 * "Note that the tlbia instruction is not implemented on the
-	 * 603e."
-	 *
-	 * bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
-	 * incrementing by 0x1000 each time. The code below is sort of
-	 * based on code in "flush_tlbs" from arch/ppc/kernel/head.S
-	 *
-	 */
-	lis	r3, 0
-	lis	r5, 2
-
-1:
-	tlbie	r3
-	addi	r3, r3, 0x1000
-	cmp	0, 0, r3, r5
-	blt	1b
-
-	blr
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
-	.globl	icache_enable
-icache_enable:
-	mfspr	r3, HID0
-	ori	r3, r3, HID0_ICE
-	li	r4, HID0_ICFI|HID0_ILOCK
-	andc	r3, r3, r4
-	ori	r4, r3, HID0_ICFI
-	isync
-	mtspr	HID0, r4    /* sets enable and invalidate, clears lock */
-	isync
-	mtspr	HID0, r3	/* clears invalidate */
-	blr
-
-	.globl	icache_disable
-icache_disable:
-	mfspr	r3, HID0
-	lis	r4, 0
-	ori	r4, r4, HID0_ICE|HID0_ICFI|HID0_ILOCK
-	andc	r3, r3, r4
-	isync
-	mtspr	HID0, r3	/* clears invalidate, enable and lock */
-	blr
-
-	.globl	icache_status
-icache_status:
-	mfspr	r3, HID0
-	rlwinm	r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
-	blr
-
-	.globl	dcache_enable
-dcache_enable:
-	mfspr	r3, HID0
-	li	r5, HID0_DCFI|HID0_DLOCK
-	andc	r3, r3, r5
-	ori	r3, r3, HID0_DCE
-	sync
-	mtspr	HID0, r3		/* enable, no invalidate */
-	blr
-
-	.globl	dcache_disable
-dcache_disable:
-	mflr	r4
-	bl	flush_dcache		/* uses r3 and r5 */
-	mfspr	r3, HID0
-	li	r5, HID0_DCE|HID0_DLOCK
-	andc	r3, r3, r5
-	ori	r5, r3, HID0_DCFI
-	sync
-	mtspr	HID0, r5	/* sets invalidate, clears enable and lock */
-	sync
-	mtspr	HID0, r3	/* clears invalidate */
-	mtlr	r4
-	blr
-
-	.globl	dcache_status
-dcache_status:
-	mfspr	r3, HID0
-	rlwinm	r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
-	blr
-
-	.globl	flush_dcache
-flush_dcache:
-	lis	r3, 0
-	lis	r5, CONFIG_SYS_CACHELINE_SIZE
-1:	cmp	0, 1, r3, r5
-	bge	2f
-	lwz	r5, 0(r3)
-	lis	r5, CONFIG_SYS_CACHELINE_SIZE
-	addi	r3, r3, 0x4
-	b	1b
-2:	blr
-
-/*-------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
-	.globl	relocate_code
-relocate_code:
-	mr	r1,  r3		/* Set new stack pointer	*/
-	mr	r9,  r4		/* Save copy of Global Data pointer */
-	mr	r10, r5		/* Save copy of Destination Address */
-
-	GET_GOT
-	mr	r3,  r5				/* Destination Address */
-	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address */
-	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
-	lwz	r5, GOT(__bss_start)
-	sub	r5, r5, r4
-	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size */
-
-	/*
-	 * Fix GOT pointer:
-	 *
-	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE)
-	 *		+ Destination Address
-	 *
-	 * Offset:
-	 */
-	sub	r15, r10, r4
-
-	/* First our own GOT */
-	add	r12, r12, r15
-	/* then the one used by the C code */
-	add	r30, r30, r15
-
-	/*
-	 * Now relocate code
-	 */
-
-	cmplw	cr1,r3,r4
-	addi	r0,r5,3
-	srwi.	r0,r0,2
-	beq	cr1,4f		/* In place copy is not necessary */
-	beq	7f		/* Protect against 0 count	  */
-	mtctr	r0
-	bge	cr1,2f
-	la	r8,-4(r4)
-	la	r7,-4(r3)
-
-	/* copy */
-1:	lwzu	r0,4(r8)
-	stwu	r0,4(r7)
-	bdnz	1b
-
-	addi	r0,r5,3
-	srwi.	r0,r0,2
-	mtctr	r0
-	la	r8,-4(r4)
-	la	r7,-4(r3)
-
-	/* and compare */
-20:	lwzu	r20,4(r8)
-	lwzu	r21,4(r7)
-	xor. r22, r20, r21
-	bne  30f
-	bdnz	20b
-	b 4f
-
-	/* compare failed */
-30:	li r3, 0
-	blr
-
-2:	slwi	r0,r0,2 /* re copy in reverse order ... y do we needed it? */
-	add	r8,r4,r0
-	add	r7,r3,r0
-3:	lwzu	r0,-4(r8)
-	stwu	r0,-4(r7)
-	bdnz	3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4:	cmpwi	r6,0
-	add	r5,r3,r5
-	beq	7f		/* Always flush prefetch queue in any case */
-	subi	r0,r6,1
-	andc	r3,r3,r0
-	mr	r4,r3
-5:	dcbst	0,r4
-	add	r4,r4,r6
-	cmplw	r4,r5
-	blt	5b
-	sync			/* Wait for all dcbst to complete on bus */
-	mr	r4,r3
-6:	icbi	0,r4
-	add	r4,r4,r6
-	cmplw	r4,r5
-	blt	6b
-7:	sync			/* Wait for all icbi to complete on bus	*/
-	isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-	addi	r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
-	mtlr	r0
-	blr
-
-in_ram:
-
-	/*
-	 * Relocation Function, r12 point to got2+0x8000
-	 *
-	 * Adjust got2 pointers, no need to check for 0, this code
-	 * already puts a few entries in the table.
-	 */
-	li	r0,__got2_entries@sectoff@l
-	la	r3,GOT(_GOT2_TABLE_)
-	lwz	r11,GOT(_GOT2_TABLE_)
-	mtctr	r0
-	sub	r11,r3,r11
-	addi	r3,r3,-4
-1:	lwzu	r0,4(r3)
-	cmpwi	r0,0
-	beq-	2f
-	add	r0,r0,r11
-	stw	r0,0(r3)
-2:	bdnz	1b
-
-#ifndef CONFIG_NAND_SPL
-	/*
-	 * Now adjust the fixups and the pointers to the fixups
-	 * in case we need to move ourselves again.
-	 */
-	li	r0,__fixup_entries@sectoff@l
-	lwz	r3,GOT(_FIXUP_TABLE_)
-	cmpwi	r0,0
-	mtctr	r0
-	addi	r3,r3,-4
-	beq	4f
-3:	lwzu	r4,4(r3)
-	lwzux	r0,r4,r11
-	add	r0,r0,r11
-	stw	r10,0(r3)
-	stw	r0,0(r4)
-	bdnz	3b
-4:
-#endif
-
-clear_bss:
-	/*
-	 * Now clear BSS segment
-	 */
-	lwz	r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
-	/*
-	 * For HYMOD - the environment is the very last item in flash.
-	 * The real .bss stops just before environment starts, so only
-	 * clear up to that point.
-	 *
-	 * taken from mods for FADS board
-	 */
-	lwz	r4,GOT(environment)
-#else
-	lwz	r4,GOT(_end)
-#endif
-
-	cmplw	0, r3, r4
-	beq	6f
-
-	li	r0, 0
-5:
-	stw	r0, 0(r3)
-	addi	r3, r3, 4
-	cmplw	0, r3, r4
-	bne	5b
-6:
-
-	mr	r3, r9		/* Global Data pointer		*/
-	mr	r4, r10		/* Destination Address		*/
-	bl	board_init_r
-
-#ifndef CONFIG_NAND_SPL
-	/*
-	 * Copy exception vector code to low memory
-	 *
-	 * r3: dest_addr
-	 * r7: source address, r8: end address, r9: target address
-	 */
-	.globl	trap_init
-trap_init:
-	mflr	r4		/* save link register */
-	GET_GOT
-	lwz	r7, GOT(_start)
-	lwz	r8, GOT(_end_of_vectors)
-
-	li	r9, 0x100	/* reset vector always at 0x100 */
-
-	cmplw	0, r7, r8
-	bgelr			/* return if r7>=r8 - just in case */
-1:
-	lwz	r0, 0(r7)
-	stw	r0, 0(r9)
-	addi	r7, r7, 4
-	addi	r9, r9, 4
-	cmplw	0, r7, r8
-	bne	1b
-
-	/*
-	 * relocate `hdlr' and `int_return' entries
-	 */
-	li	r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
-	li	r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
-	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector */
-	cmplw	0, r7, r8
-	blt	2b
-
-	li	r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
-	bl	trap_reloc
-
-	li	r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
-	bl	trap_reloc
-
-	li	r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
-	li	r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
-	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector */
-	cmplw	0, r7, r8
-	blt	3b
-
-	li	r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
-	li	r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
-	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector */
-	cmplw	0, r7, r8
-	blt	4b
-
-	mfmsr	r3			/* now that the vectors have */
-	lis	r7, MSR_IP@h		/* relocated into low memory */
-	ori	r7, r7, MSR_IP@l	/* MSR[IP] can be turned off */
-	andc	r3, r3, r7		/* (if it was on) */
-	SYNC				/* Some chip revs need this... */
-	mtmsr	r3
-	SYNC
-
-	mtlr	r4			/* restore link register    */
-	blr
-
-#endif /* !CONFIG_NAND_SPL */
-
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
-lock_ram_in_cache:
-	/* Allocate Initial RAM in data cache.
-	 */
-	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
-	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
-	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
-		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
-	mtctr	r4
-1:
-	dcbz	r0, r3
-	addi	r3, r3, 32
-	bdnz	1b
-
-	/* Lock the data cache */
-	mfspr	r0, HID0
-	ori	r0, r0, HID0_DLOCK
-	sync
-	mtspr	HID0, r0
-	sync
-	blr
-
-#ifndef CONFIG_NAND_SPL
-.globl unlock_ram_in_cache
-unlock_ram_in_cache:
-	/* invalidate the INIT_RAM section */
-	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
-	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
-	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
-		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
-	mtctr	r4
-1:	icbi	r0, r3
-	dcbi	r0, r3
-	addi	r3, r3, 32
-	bdnz	1b
-	sync			/* Wait for all icbi to complete on bus	*/
-	isync
-
-	/* Unlock the data cache and invalidate it */
-	mfspr   r3, HID0
-	li	r5, HID0_DLOCK|HID0_DCFI
-	andc	r3, r3, r5		/* no invalidate, unlock */
-	ori	r5, r3, HID0_DCFI	/* invalidate, unlock */
-	sync
-	mtspr	HID0, r5		/* invalidate, unlock */
-	sync
-	mtspr	HID0, r3		/* no invalidate, unlock */
-	blr
-#endif /* !CONFIG_NAND_SPL */
-#endif /* CONFIG_SYS_INIT_RAM_LOCK */
-
-#ifdef CONFIG_SYS_FLASHBOOT
-map_flash_by_law1:
-	/* When booting from ROM (Flash or EPROM), clear the  */
-	/* Address Mask in OR0 so ROM appears everywhere      */
-	/*----------------------------------------------------*/
-	lis	r3, (CONFIG_SYS_IMMR)@h  /* r3 <= CONFIG_SYS_IMMR    */
-	lwz	r4, OR0@l(r3)
-	li	r5, 0x7fff        /* r5 <= 0x00007FFFF */
-	and	r4, r4, r5
-	stw	r4, OR0@l(r3)     /* OR0 <= OR0 & 0x00007FFFF */
-
-	/* As MPC8349E User's Manual presented, when RCW[BMS] is set to 0,
-	 * system will boot from 0x0000_0100, and the LBLAWBAR0[BASE_ADDR]
-	 * reset value is 0x00000; when RCW[BMS] is set to 1, system will boot
-	 * from 0xFFF0_0100, and the LBLAWBAR0[BASE_ADDR] reset value is
-	 * 0xFF800.  From the hard resetting to here, the processor fetched and
-	 * executed the instructions one by one.  There is not absolutely
-	 * jumping happened.  Laterly, the u-boot code has to do an absolutely
-	 * jumping to tell the CPU instruction fetching component what the
-	 * u-boot TEXT base address is.  Because the TEXT base resides in the
-	 * boot ROM memory space, to garantee the code can run smoothly after
-	 * that jumping, we must map in the entire boot ROM by Local Access
-	 * Window.  Sometimes, we desire an non-0x00000 or non-0xFF800 starting
-	 * address for boot ROM, such as 0xFE000000.  In this case, the default
-	 * LBIU Local Access Widow 0 will not cover this memory space.  So, we
-	 * need another window to map in it.
-	 */
-	lis r4, (CONFIG_SYS_FLASH_BASE)@h
-	ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
-	stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CONFIG_SYS_FLASH_BASE */
-
-	/* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR1 */
-	lis r4, (0x80000012)@h
-	ori r4, r4, (0x80000012)@l
-	li r5, CONFIG_SYS_FLASH_SIZE
-1:	srawi. r5, r5, 1	/* r5 = r5 >> 1 */
-	addi r4, r4, 1
-	bne 1b
-
-	stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
-	blr
-
-	/* Though all the LBIU Local Access Windows and LBC Banks will be
-	 * initialized in the C code, we'd better configure boot ROM's
-	 * window 0 and bank 0 correctly at here.
-	 */
-remap_flash_by_law0:
-	/* Initialize the BR0 with the boot ROM starting address. */
-	lwz r4, BR0(r3)
-	li  r5, 0x7FFF
-	and r4, r4, r5
-	lis r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@h
-	ori r5, r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@l
-	or  r5, r5, r4
-	stw r5, BR0(r3) /* r5 <= (CONFIG_SYS_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
-
-	lwz r4, OR0(r3)
-	lis r5, ~((CONFIG_SYS_FLASH_SIZE << 4) - 1)
-	or r4, r4, r5
-	stw r4, OR0(r3)
-
-	lis r4, (CONFIG_SYS_FLASH_BASE)@h
-	ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
-	stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CONFIG_SYS_FLASH_BASE */
-
-	/* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR0 */
-	lis r4, (0x80000012)@h
-	ori r4, r4, (0x80000012)@l
-	li r5, CONFIG_SYS_FLASH_SIZE
-1:	srawi. r5, r5, 1 /* r5 = r5 >> 1 */
-	addi r4, r4, 1
-	bne 1b
-	stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */
-
-
-	xor r4, r4, r4
-	stw r4, LBLAWBAR1(r3)
-	stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
-	blr
-#endif /* CONFIG_SYS_FLASHBOOT */
diff --git a/cpu/mpc83xx/traps.c b/cpu/mpc83xx/traps.c
deleted file mode 100644
index 9d71b8b..0000000
--- a/cpu/mpc83xx/traps.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware
- * exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-#include <asm/mpc8349_pci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
-#define END_OF_MEM	(gd->bd->bi_memstart + gd->bd->bi_memsize)
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
-	int cnt = 0;
-	unsigned long i;
-
-	puts ("Call backtrace: ");
-	while (sp) {
-		if ((uint)sp > END_OF_MEM)
-			break;
-
-		i = sp[1];
-		if (cnt++ % 7 == 0)
-			putc ('\n');
-		printf("%08lX ", i);
-		if (cnt > 32) break;
-		sp = (unsigned long *)*sp;
-	}
-	putc ('\n');
-}
-
-void show_regs(struct pt_regs * regs)
-{
-	int i;
-
-	printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
-	       regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
-	printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
-	       regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
-	       regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
-	       regs->msr&MSR_IR ? 1 : 0,
-	       regs->msr&MSR_DR ? 1 : 0);
-
-	putc ('\n');
-	for (i = 0;  i < 32;  i++) {
-		if ((i % 8) == 0) {
-			printf("GPR%02d: ", i);
-		}
-
-		printf("%08lX ", regs->gpr[i]);
-		if ((i % 8) == 7) {
-			putc ('\n');
-		}
-	}
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-#ifdef CONFIG_PCI
-void dump_pci (void)
-{
-/*
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	printf ("PCI: err status %x err mask %x err ctrl %x\n",
-		le32_to_cpu (immap->im_pci.pci_esr),
-		le32_to_cpu (immap->im_pci.pci_emr),
-		le32_to_cpu (immap->im_pci.pci_ecr));
-	printf ("     error address %x error data %x ctrl %x\n",
-		le32_to_cpu (immap->im_pci.pci_eacr),
-		le32_to_cpu (immap->im_pci.pci_edcr),
-		le32_to_cpu (immap->im_pci.pci_eccr));
-*/
-}
-#endif
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
-	unsigned long fixup;
-
-	/* Probing PCI using config cycles cause this exception
-	 * when a device is not present.  Catch it and return to
-	 * the PCI exception handler.
-	 */
-#ifdef CONFIG_PCI
-#if 0
-	volatile immap_t *immap  = (immap_t *)CONFIG_SYS_IMMR;
-#ifdef DEBUG
-	dump_pci();
-#endif
-	/* clear the error in the error status register */
-	if(immap->im_pci.pci_esr & cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) {
-		immap->im_pci.pci_esr = cpu_to_le32(PCI_ERROR_PCI_NO_RSP);
-		return;
-	}
-#endif
-#endif /* CONFIG_PCI */
-	if ((fixup = search_exception_table(regs->nip)) != 0) {
-		regs->nip = fixup;
-		return;
-	}
-
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-
-	puts ("Machine check in kernel mode.\n"
-		"Caused by (from msr): ");
-	printf("regs %p ",regs);
-	switch( regs->msr & 0x000F0000) {
-	case (0x80000000>>12):
-		puts ("Machine check signal - probably due to mm fault\n"
-			"with mmu off\n");
-		break;
-	case (0x80000000>>13):
-		puts ("Transfer error ack signal\n");
-		break;
-	case (0x80000000>>14):
-		puts ("Data parity signal\n");
-		break;
-	case (0x80000000>>15):
-		puts ("Address parity signal\n");
-		break;
-	default:
-		puts ("Unknown values in msr\n");
-	}
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-#ifdef CONFIG_PCI
-	dump_pci();
-#endif
-	panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
-	       regs->nip, regs->msr, regs->trap);
-	_exception(0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-void
-DebugException(struct pt_regs *regs)
-{
-	printf("Debugger trap at @ %lx\n", regs->nip );
-	show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
-	do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading.  If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
-	int	retval;
-
-	__asm__ __volatile__(			\
-		"1:	lwz %0,0(%1)\n"		\
-		"	eieio\n"		\
-		"	li %0,0\n"		\
-		"2:\n"				\
-		".section .fixup,\"ax\"\n"	\
-		"3:	li %0,-1\n"		\
-		"	b 2b\n"			\
-		".section __ex_table,\"a\"\n"	\
-		"	.align 2\n"		\
-		"	.long 1b,3b\n"		\
-		".text"				\
-		: "=r" (retval) : "r"(addr));
-
-	return (retval);
-#endif
-	return 0;
-}
diff --git a/cpu/mpc83xx/u-boot.lds b/cpu/mpc83xx/u-boot.lds
deleted file mode 100644
index c84d4b0..0000000
--- a/cpu/mpc83xx/u-boot.lds
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc83xx/start.o	(.text)
-    *(.text)
-    *(.got1)
-    . = ALIGN(16);
-    *(.eh_frame)
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)