Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:
	cpu/arm1176/cpu.c
	cpu/arm1176/start.S
	cpu/arm_cortexa8/s5pc1xx/Makefile
	cpu/arm_cortexa8/s5pc1xx/clock.c
	drivers/serial/serial_s5p.c
	include/asm-arm/arch-s5pc1xx/clk.h
	include/asm-arm/arch-s5pc1xx/gpio.h
	include/asm-arm/arch-s5pc1xx/uart.h

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

1 files changed, 0 insertions, 918 deletions

diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
deleted file mode 100644
index 44aaa9a..0000000
--- a/cpu/mpc83xx/spd_sdram.c
+++ /dev/null
@@ -1,918 +0,0 @@
-/*
- * (C) Copyright 2006-2007 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- * (C) Copyright 2003 Motorola Inc.
- * Xianghua Xiao (X.Xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include <spd.h>
-#include <asm/mmu.h>
-#include <spd_sdram.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void board_add_ram_info(int use_default)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-	char buf[32];
-
-	printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK)
-			   >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1);
-
-	if (ddr->sdram_cfg & SDRAM_CFG_32_BE)
-		puts(", 32-bit");
-	else
-		puts(", 64-bit");
-
-	if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
-		puts(", ECC on");
-	else
-		puts(", ECC off");
-
-	printf(", %s MHz)", strmhz(buf, gd->mem_clk));
-
-#if defined(CONFIG_SYS_LB_SDRAM) && defined(CONFIG_SYS_LBC_SDRAM_SIZE)
-	puts("\nSDRAM: ");
-	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)");
-#endif
-}
-
-#ifdef CONFIG_SPD_EEPROM
-#ifndef	CONFIG_SYS_READ_SPD
-#define CONFIG_SYS_READ_SPD	i2c_read
-#endif
-
-/*
- * Convert picoseconds into clock cycles (rounding up if needed).
- */
-int
-picos_to_clk(int picos)
-{
-	unsigned int mem_bus_clk;
-	int clks;
-
-	mem_bus_clk = gd->mem_clk >> 1;
-	clks = picos / (1000000000 / (mem_bus_clk / 1000));
-	if (picos % (1000000000 / (mem_bus_clk / 1000)) != 0)
-		clks++;
-
-	return clks;
-}
-
-unsigned int banksize(unsigned char row_dens)
-{
-	return ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
-}
-
-int read_spd(uint addr)
-{
-	return ((int) addr);
-}
-
-#undef SPD_DEBUG
-#ifdef SPD_DEBUG
-static void spd_debug(spd_eeprom_t *spd)
-{
-	printf ("\nDIMM type:       %-18.18s\n", spd->mpart);
-	printf ("SPD size:        %d\n", spd->info_size);
-	printf ("EEPROM size:     %d\n", 1 << spd->chip_size);
-	printf ("Memory type:     %d\n", spd->mem_type);
-	printf ("Row addr:        %d\n", spd->nrow_addr);
-	printf ("Column addr:     %d\n", spd->ncol_addr);
-	printf ("# of rows:       %d\n", spd->nrows);
-	printf ("Row density:     %d\n", spd->row_dens);
-	printf ("# of banks:      %d\n", spd->nbanks);
-	printf ("Data width:      %d\n",
-			256 * spd->dataw_msb + spd->dataw_lsb);
-	printf ("Chip width:      %d\n", spd->primw);
-	printf ("Refresh rate:    %02X\n", spd->refresh);
-	printf ("CAS latencies:   %02X\n", spd->cas_lat);
-	printf ("Write latencies: %02X\n", spd->write_lat);
-	printf ("tRP:             %d\n", spd->trp);
-	printf ("tRCD:            %d\n", spd->trcd);
-	printf ("\n");
-}
-#endif /* SPD_DEBUG */
-
-long int spd_sdram()
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-	volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
-	spd_eeprom_t spd;
-	unsigned int n_ranks;
-	unsigned int odt_rd_cfg, odt_wr_cfg;
-	unsigned char twr_clk, twtr_clk;
-	unsigned int sdram_type;
-	unsigned int memsize;
-	unsigned int law_size;
-	unsigned char caslat, caslat_ctrl;
-	unsigned int trfc, trfc_clk, trfc_low, trfc_high;
-	unsigned int trcd_clk, trtp_clk;
-	unsigned char cke_min_clk;
-	unsigned char add_lat, wr_lat;
-	unsigned char wr_data_delay;
-	unsigned char four_act;
-	unsigned char cpo;
-	unsigned char burstlen;
-	unsigned char odt_cfg, mode_odt_enable;
-	unsigned int max_bus_clk;
-	unsigned int max_data_rate, effective_data_rate;
-	unsigned int ddrc_clk;
-	unsigned int refresh_clk;
-	unsigned int sdram_cfg;
-	unsigned int ddrc_ecc_enable;
-	unsigned int pvr = get_pvr();
-
-	/*
-	 * First disable the memory controller (could be enabled
-	 * by the debugger)
-	 */
-	clrsetbits_be32(&ddr->sdram_cfg, SDRAM_CFG_MEM_EN, 0);
-	sync();
-	isync();
-
-	/* Read SPD parameters with I2C */
-	CONFIG_SYS_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
-#ifdef SPD_DEBUG
-	spd_debug(&spd);
-#endif
-	/* Check the memory type */
-	if (spd.mem_type != SPD_MEMTYPE_DDR && spd.mem_type != SPD_MEMTYPE_DDR2) {
-		debug("DDR: Module mem type is %02X\n", spd.mem_type);
-		return 0;
-	}
-
-	/* Check the number of physical bank */
-	if (spd.mem_type == SPD_MEMTYPE_DDR) {
-		n_ranks = spd.nrows;
-	} else {
-		n_ranks = (spd.nrows & 0x7) + 1;
-	}
-
-	if (n_ranks > 2) {
-		printf("DDR: The number of physical bank is %02X\n", n_ranks);
-		return 0;
-	}
-
-	/* Check if the number of row of the module is in the range of DDRC */
-	if (spd.nrow_addr < 12 || spd.nrow_addr > 15) {
-		printf("DDR: Row number is out of range of DDRC, row=%02X\n",
-							 spd.nrow_addr);
-		return 0;
-	}
-
-	/* Check if the number of col of the module is in the range of DDRC */
-	if (spd.ncol_addr < 8 || spd.ncol_addr > 11) {
-		printf("DDR: Col number is out of range of DDRC, col=%02X\n",
-							 spd.ncol_addr);
-		return 0;
-	}
-
-#ifdef CONFIG_SYS_DDRCDR_VALUE
-	/*
-	 * Adjust DDR II IO voltage biasing.  It just makes it work.
-	 */
-	if(spd.mem_type == SPD_MEMTYPE_DDR2) {
-		immap->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
-	}
-	udelay(50000);
-#endif
-
-	/*
-	 * ODT configuration recommendation from DDR Controller Chapter.
-	 */
-	odt_rd_cfg = 0;			/* Never assert ODT */
-	odt_wr_cfg = 0;			/* Never assert ODT */
-	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
-		odt_wr_cfg = 1;		/* Assert ODT on writes to CSn */
-	}
-
-	/* Setup DDR chip select register */
-#ifdef CONFIG_SYS_83XX_DDR_USES_CS0
-	ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
-	ddr->cs_config[0] = ( 1 << 31
-			    | (odt_rd_cfg << 20)
-			    | (odt_wr_cfg << 16)
-			    | ((spd.nbanks == 8 ? 1 : 0) << 14)
-			    | ((spd.nrow_addr - 12) << 8)
-			    | (spd.ncol_addr - 8) );
-	debug("\n");
-	debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
-	debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
-
-	if (n_ranks == 2) {
-		ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
-				  | ((banksize(spd.row_dens) >> 23) - 1) );
-		ddr->cs_config[1] = ( 1<<31
-				    | (odt_rd_cfg << 20)
-				    | (odt_wr_cfg << 16)
-				    | ((spd.nbanks == 8 ? 1 : 0) << 14)
-				    | ((spd.nrow_addr - 12) << 8)
-				    | (spd.ncol_addr - 8) );
-		debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
-		debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
-	}
-
-#else
-	ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
-	ddr->cs_config[2] = ( 1 << 31
-			    | (odt_rd_cfg << 20)
-			    | (odt_wr_cfg << 16)
-			    | ((spd.nbanks == 8 ? 1 : 0) << 14)
-			    | ((spd.nrow_addr - 12) << 8)
-			    | (spd.ncol_addr - 8) );
-	debug("\n");
-	debug("cs2_bnds = 0x%08x\n",ddr->csbnds[2].csbnds);
-	debug("cs2_config = 0x%08x\n",ddr->cs_config[2]);
-
-	if (n_ranks == 2) {
-		ddr->csbnds[3].csbnds = ( (banksize(spd.row_dens) >> 8)
-				  | ((banksize(spd.row_dens) >> 23) - 1) );
-		ddr->cs_config[3] = ( 1<<31
-				    | (odt_rd_cfg << 20)
-				    | (odt_wr_cfg << 16)
-				    | ((spd.nbanks == 8 ? 1 : 0) << 14)
-				    | ((spd.nrow_addr - 12) << 8)
-				    | (spd.ncol_addr - 8) );
-		debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds);
-		debug("cs3_config = 0x%08x\n",ddr->cs_config[3]);
-	}
-#endif
-
-	/*
-	 * Figure out memory size in Megabytes.
-	 */
-	memsize = n_ranks * banksize(spd.row_dens) / 0x100000;
-
-	/*
-	 * First supported LAW size is 16M, at LAWAR_SIZE_16M == 23.
-	 */
-	law_size = 19 + __ilog2(memsize);
-
-	/*
-	 * Set up LAWBAR for all of DDR.
-	 */
-	ecm->bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
-	ecm->ar  = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size));
-	debug("DDR:bar=0x%08x\n", ecm->bar);
-	debug("DDR:ar=0x%08x\n", ecm->ar);
-
-	/*
-	 * Find the largest CAS by locating the highest 1 bit
-	 * in the spd.cas_lat field.  Translate it to a DDR
-	 * controller field value:
-	 *
-	 *	CAS Lat	DDR I	DDR II	Ctrl
-	 *	Clocks	SPD Bit	SPD Bit	Value
-	 *	-------	-------	-------	-----
-	 *	1.0	0		0001
-	 *	1.5	1		0010
-	 *	2.0	2	2	0011
-	 *	2.5	3		0100
-	 *	3.0	4	3	0101
-	 *	3.5	5		0110
-	 *	4.0	6	4	0111
-	 *	4.5			1000
-	 *	5.0		5	1001
-	 */
-	caslat = __ilog2(spd.cas_lat);
-	if ((spd.mem_type == SPD_MEMTYPE_DDR)
-	    && (caslat > 6)) {
-		printf("DDR I: Invalid SPD CAS Latency: 0x%x.\n", spd.cas_lat);
-		return 0;
-	} else if (spd.mem_type == SPD_MEMTYPE_DDR2
-		   && (caslat < 2 || caslat > 5)) {
-		printf("DDR II: Invalid SPD CAS Latency: 0x%x.\n",
-		       spd.cas_lat);
-		return 0;
-	}
-	debug("DDR: caslat SPD bit is %d\n", caslat);
-
-	max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
-			+ (spd.clk_cycle & 0x0f));
-	max_data_rate = max_bus_clk * 2;
-
-	debug("DDR:Module maximum data rate is: %d MHz\n", max_data_rate);
-
-	ddrc_clk = gd->mem_clk / 1000000;
-	effective_data_rate = 0;
-
-	if (max_data_rate >= 460) { /* it is DDR2-800, 667, 533 */
-		if (spd.cas_lat & 0x08)
-			caslat = 3;
-		else
-			caslat = 4;
-		if (ddrc_clk <= 460 && ddrc_clk > 350)
-			effective_data_rate = 400;
-		else if (ddrc_clk <=350 && ddrc_clk > 280)
-			effective_data_rate = 333;
-		else if (ddrc_clk <= 280 && ddrc_clk > 230)
-			effective_data_rate = 266;
-		else
-			effective_data_rate = 200;
-	} else if (max_data_rate >= 390 && max_data_rate < 460) { /* it is DDR 400 */
-		if (ddrc_clk <= 460 && ddrc_clk > 350) {
-			/* DDR controller clk at 350~460 */
-			effective_data_rate = 400; /* 5ns */
-			caslat = caslat;
-		} else if (ddrc_clk <= 350 && ddrc_clk > 280) {
-			/* DDR controller clk at 280~350 */
-			effective_data_rate = 333; /* 6ns */
-			if (spd.clk_cycle2 == 0x60)
-				caslat = caslat - 1;
-			else
-				caslat = caslat;
-		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
-			/* DDR controller clk at 230~280 */
-			effective_data_rate = 266; /* 7.5ns */
-			if (spd.clk_cycle3 == 0x75)
-				caslat = caslat - 2;
-			else if (spd.clk_cycle2 == 0x75)
-				caslat = caslat - 1;
-			else
-				caslat = caslat;
-		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDR controller clk at 90~230 */
-			effective_data_rate = 200; /* 10ns */
-			if (spd.clk_cycle3 == 0xa0)
-				caslat = caslat - 2;
-			else if (spd.clk_cycle2 == 0xa0)
-				caslat = caslat - 1;
-			else
-				caslat = caslat;
-		}
-	} else if (max_data_rate >= 323) { /* it is DDR 333 */
-		if (ddrc_clk <= 350 && ddrc_clk > 280) {
-			/* DDR controller clk at 280~350 */
-			effective_data_rate = 333; /* 6ns */
-			caslat = caslat;
-		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
-			/* DDR controller clk at 230~280 */
-			effective_data_rate = 266; /* 7.5ns */
-			if (spd.clk_cycle2 == 0x75)
-				caslat = caslat - 1;
-			else
-				caslat = caslat;
-		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDR controller clk at 90~230 */
-			effective_data_rate = 200; /* 10ns */
-			if (spd.clk_cycle3 == 0xa0)
-				caslat = caslat - 2;
-			else if (spd.clk_cycle2 == 0xa0)
-				caslat = caslat - 1;
-			else
-				caslat = caslat;
-		}
-	} else if (max_data_rate >= 256) { /* it is DDR 266 */
-		if (ddrc_clk <= 350 && ddrc_clk > 280) {
-			/* DDR controller clk at 280~350 */
-			printf("DDR: DDR controller freq is more than "
-				"max data rate of the module\n");
-			return 0;
-		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
-			/* DDR controller clk at 230~280 */
-			effective_data_rate = 266; /* 7.5ns */
-			caslat = caslat;
-		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDR controller clk at 90~230 */
-			effective_data_rate = 200; /* 10ns */
-			if (spd.clk_cycle2 == 0xa0)
-				caslat = caslat - 1;
-		}
-	} else if (max_data_rate >= 190) { /* it is DDR 200 */
-		if (ddrc_clk <= 350 && ddrc_clk > 230) {
-			/* DDR controller clk at 230~350 */
-			printf("DDR: DDR controller freq is more than "
-				"max data rate of the module\n");
-			return 0;
-		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDR controller clk at 90~230 */
-			effective_data_rate = 200; /* 10ns */
-			caslat = caslat;
-		}
-	}
-
-	debug("DDR:Effective data rate is: %dMHz\n", effective_data_rate);
-	debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat);
-
-	/*
-	 * Errata DDR6 work around: input enable 2 cycles earlier.
-	 * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
-	 */
-	if(PVR_MAJ(pvr) <= 1 && spd.mem_type == SPD_MEMTYPE_DDR){
-		if (caslat == 2)
-			ddr->debug_reg = 0x201c0000; /* CL=2 */
-		else if (caslat == 3)
-			ddr->debug_reg = 0x202c0000; /* CL=2.5 */
-		else if (caslat == 4)
-			ddr->debug_reg = 0x202c0000; /* CL=3.0 */
-
-		__asm__ __volatile__ ("sync");
-
-		debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg);
-	}
-
-	/*
-	 * Convert caslat clocks to DDR controller value.
-	 * Force caslat_ctrl to be DDR Controller field-sized.
-	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR) {
-		caslat_ctrl = (caslat + 1) & 0x07;
-	} else {
-		caslat_ctrl =  (2 * caslat - 1) & 0x0f;
-	}
-
-	debug("DDR: effective data rate is %d MHz\n", effective_data_rate);
-	debug("DDR: caslat SPD bit is %d, controller field is 0x%x\n",
-	      caslat, caslat_ctrl);
-
-	/*
-	 * Timing Config 0.
-	 * Avoid writing for DDR I.
-	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
-		unsigned char taxpd_clk = 8;		/* By the book. */
-		unsigned char tmrd_clk = 2;		/* By the book. */
-		unsigned char act_pd_exit = 2;		/* Empirical? */
-		unsigned char pre_pd_exit = 6;		/* Empirical? */
-
-		ddr->timing_cfg_0 = (0
-			| ((act_pd_exit & 0x7) << 20)	/* ACT_PD_EXIT */
-			| ((pre_pd_exit & 0x7) << 16)	/* PRE_PD_EXIT */
-			| ((taxpd_clk & 0xf) << 8)	/* ODT_PD_EXIT */
-			| ((tmrd_clk & 0xf) << 0)	/* MRS_CYC */
-			);
-		debug("DDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
-	}
-
-	/*
-	 * For DDR I, WRREC(Twr) and WRTORD(Twtr) are not in SPD,
-	 * use conservative value.
-	 * For DDR II, they are bytes 36 and 37, in quarter nanos.
-	 */
-
-	if (spd.mem_type == SPD_MEMTYPE_DDR) {
-		twr_clk = 3;	/* Clocks */
-		twtr_clk = 1;	/* Clocks */
-	} else {
-		twr_clk = picos_to_clk(spd.twr * 250);
-		twtr_clk = picos_to_clk(spd.twtr * 250);
-		if (twtr_clk < 2)
-			twtr_clk = 2;
-	}
-
-	/*
-	 * Calculate Trfc, in picos.
-	 * DDR I:  Byte 42 straight up in ns.
-	 * DDR II: Byte 40 and 42 swizzled some, in ns.
-	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR) {
-		trfc = spd.trfc * 1000;		/* up to ps */
-	} else {
-		unsigned int byte40_table_ps[8] = {
-			0,
-			250,
-			330,
-			500,
-			660,
-			750,
-			0,
-			0
-		};
-
-		trfc = (((spd.trctrfc_ext & 0x1) * 256) + spd.trfc) * 1000
-			+ byte40_table_ps[(spd.trctrfc_ext >> 1) & 0x7];
-	}
-	trfc_clk = picos_to_clk(trfc);
-
-	/*
-	 * Trcd, Byte 29, from quarter nanos to ps and clocks.
-	 */
-	trcd_clk = picos_to_clk(spd.trcd * 250) & 0x7;
-
-	/*
-	 * Convert trfc_clk to DDR controller fields.  DDR I should
-	 * fit in the REFREC field (16-19) of TIMING_CFG_1, but the
-	 * 83xx controller has an extended REFREC field of three bits.
-	 * The controller automatically adds 8 clocks to this value,
-	 * so preadjust it down 8 first before splitting it up.
-	 */
-	trfc_low = (trfc_clk - 8) & 0xf;
-	trfc_high = ((trfc_clk - 8) >> 4) & 0x3;
-
-	ddr->timing_cfg_1 =
-	    (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |	/* PRETOACT */
-	     ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) | /* ACTTOPRE */
-	     (trcd_clk << 20 ) |				/* ACTTORW */
-	     (caslat_ctrl << 16 ) |				/* CASLAT */
-	     (trfc_low << 12 ) |				/* REFEC */
-	     ((twr_clk & 0x07) << 8) |				/* WRRREC */
-	     ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) |	/* ACTTOACT */
-	     ((twtr_clk & 0x07) << 0)				/* WRTORD */
-	    );
-
-	/*
-	 * Additive Latency
-	 * For DDR I, 0.
-	 * For DDR II, with ODT enabled, use "a value" less than ACTTORW,
-	 * which comes from Trcd, and also note that:
-	 *	add_lat + caslat must be >= 4
-	 */
-	add_lat = 0;
-	if (spd.mem_type == SPD_MEMTYPE_DDR2
-	    && (odt_wr_cfg || odt_rd_cfg)
-	    && (caslat < 4)) {
-		add_lat = 4 - caslat;
-		if ((add_lat + caslat) < 4) {
-			add_lat = 0;
-		}
-	}
-
-	/*
-	 * Write Data Delay
-	 * Historically 0x2 == 4/8 clock delay.
-	 * Empirically, 0x3 == 6/8 clock delay is suggested for DDR I 266.
-	 */
-	wr_data_delay = 2;
-
-	/*
-	 * Write Latency
-	 * Read to Precharge
-	 * Minimum CKE Pulse Width.
-	 * Four Activate Window
-	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR) {
-		/*
-		 * This is a lie.  It should really be 1, but if it is
-		 * set to 1, bits overlap into the old controller's
-		 * otherwise unused ACSM field.  If we leave it 0, then
-		 * the HW will magically treat it as 1 for DDR 1.  Oh Yea.
-		 */
-		wr_lat = 0;
-
-		trtp_clk = 2;		/* By the book. */
-		cke_min_clk = 1;	/* By the book. */
-		four_act = 1;		/* By the book. */
-
-	} else {
-		wr_lat = caslat - 1;
-
-		/* Convert SPD value from quarter nanos to picos. */
-		trtp_clk = picos_to_clk(spd.trtp * 250);
-		if (trtp_clk < 2)
-			trtp_clk = 2;
-		trtp_clk += add_lat;
-
-		cke_min_clk = 3;	/* By the book. */
-		four_act = picos_to_clk(37500);	/* By the book. 1k pages? */
-	}
-
-	/*
-	 * Empirically set ~MCAS-to-preamble override for DDR 2.
-	 * Your milage will vary.
-	 */
-	cpo = 0;
-	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
-		if (effective_data_rate == 266) {
-			cpo = 0x4;		/* READ_LAT + 1/2 */
-		} else if (effective_data_rate == 333) {
-			cpo = 0x6;		/* READ_LAT + 1 */
-		} else if (effective_data_rate == 400) {
-			cpo = 0x7;		/* READ_LAT + 5/4 */
-		} else {
-			/* Automatic calibration */
-			cpo = 0x1f;
-		}
-	}
-
-	ddr->timing_cfg_2 = (0
-		| ((add_lat & 0x7) << 28)		/* ADD_LAT */
-		| ((cpo & 0x1f) << 23)			/* CPO */
-		| ((wr_lat & 0x7) << 19)		/* WR_LAT */
-		| ((trtp_clk & 0x7) << 13)		/* RD_TO_PRE */
-		| ((wr_data_delay & 0x7) << 10)		/* WR_DATA_DELAY */
-		| ((cke_min_clk & 0x7) << 6)		/* CKE_PLS */
-		| ((four_act & 0x1f) << 0)		/* FOUR_ACT */
-		);
-
-	debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1);
-	debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2);
-
-	/* Check DIMM data bus width */
-	if (spd.dataw_lsb < 64) {
-		if (spd.mem_type == SPD_MEMTYPE_DDR)
-			burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
-		else
-			burstlen = 0x02; /* 32 bit data bus, burst len is 4 */
-		debug("\n   DDR DIMM: data bus width is 32 bit");
-	} else {
-		burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
-		debug("\n   DDR DIMM: data bus width is 64 bit");
-	}
-
-	/* Is this an ECC DDR chip? */
-	if (spd.config == 0x02)
-		debug(" with ECC\n");
-	else
-		debug(" without ECC\n");
-
-	/* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
-	   Burst type is sequential
-	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR) {
-		switch (caslat) {
-		case 1:
-			ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
-			break;
-		case 2:
-			ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
-			break;
-		case 3:
-			ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
-			break;
-		case 4:
-			ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
-			break;
-		default:
-			printf("DDR:only CL 1.5, 2.0, 2.5, 3.0 is supported\n");
-			return 0;
-		}
-	} else {
-		mode_odt_enable = 0x0;                  /* Default disabled */
-		if (odt_wr_cfg || odt_rd_cfg) {
-			/*
-			 * Bits 6 and 2 in Extended MRS(1)
-			 * Bit 2 == 0x04 == 75 Ohm, with 2 DIMM modules.
-			 * Bit 6 == 0x40 == 150 Ohm, with 1 DIMM module.
-			 */
-			mode_odt_enable = 0x40;         /* 150 Ohm */
-		}
-
-		ddr->sdram_mode =
-			(0
-			 | (1 << (16 + 10))             /* DQS Differential disable */
-			 | (add_lat << (16 + 3))        /* Additive Latency in EMRS1 */
-			 | (mode_odt_enable << 16)      /* ODT Enable in EMRS1 */
-			 | ((twr_clk - 1) << 9)         /* Write Recovery Autopre */
-			 | (caslat << 4)                /* caslat */
-			 | (burstlen << 0)              /* Burst length */
-			);
-	}
-	debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
-
-	/*
-	 * Clear EMRS2 and EMRS3.
-	 */
-	ddr->sdram_mode2 = 0;
-	debug("DDR: sdram_mode2 = 0x%08x\n", ddr->sdram_mode2);
-
-	switch (spd.refresh) {
-		case 0x00:
-		case 0x80:
-			refresh_clk = picos_to_clk(15625000);
-			break;
-		case 0x01:
-		case 0x81:
-			refresh_clk = picos_to_clk(3900000);
-			break;
-		case 0x02:
-		case 0x82:
-			refresh_clk = picos_to_clk(7800000);
-			break;
-		case 0x03:
-		case 0x83:
-			refresh_clk = picos_to_clk(31300000);
-			break;
-		case 0x04:
-		case 0x84:
-			refresh_clk = picos_to_clk(62500000);
-			break;
-		case 0x05:
-		case 0x85:
-			refresh_clk = picos_to_clk(125000000);
-			break;
-		default:
-			refresh_clk = 0x512;
-			break;
-	}
-
-	/*
-	 * Set BSTOPRE to 0x100 for page mode
-	 * If auto-charge is used, set BSTOPRE = 0
-	 */
-	ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100;
-	debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
-
-	/*
-	 * SDRAM Cfg 2
-	 */
-	odt_cfg = 0;
-#ifndef CONFIG_NEVER_ASSERT_ODT_TO_CPU
-	if (odt_rd_cfg | odt_wr_cfg) {
-		odt_cfg = 0x2;		/* ODT to IOs during reads */
-	}
-#endif
-	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
-		ddr->sdram_cfg2 = (0
-			    | (0 << 26)	/* True DQS */
-			    | (odt_cfg << 21)	/* ODT only read */
-			    | (1 << 12)	/* 1 refresh at a time */
-			    );
-
-		debug("DDR: sdram_cfg2  = 0x%08x\n", ddr->sdram_cfg2);
-	}
-
-#ifdef CONFIG_SYS_DDR_SDRAM_CLK_CNTL	/* Optional platform specific value */
-	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
-#endif
-	debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
-
-	asm("sync;isync");
-
-	udelay(600);
-
-	/*
-	 * Figure out the settings for the sdram_cfg register. Build up
-	 * the value in 'sdram_cfg' before writing since the write into
-	 * the register will actually enable the memory controller, and all
-	 * settings must be done before enabling.
-	 *
-	 * sdram_cfg[0]   = 1 (ddr sdram logic enable)
-	 * sdram_cfg[1]   = 1 (self-refresh-enable)
-	 * sdram_cfg[5:7] = (SDRAM type = DDR SDRAM)
-	 *			010 DDR 1 SDRAM
-	 *			011 DDR 2 SDRAM
-	 * sdram_cfg[12] = 0 (32_BE =0 , 64 bit bus mode)
-	 * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts)
-	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR)
-		sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1;
-	else
-		sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR2;
-
-	sdram_cfg = (0
-		     | SDRAM_CFG_MEM_EN		/* DDR enable */
-		     | SDRAM_CFG_SREN		/* Self refresh */
-		     | sdram_type		/* SDRAM type */
-		     );
-
-	/* sdram_cfg[3] = RD_EN - registered DIMM enable */
-	if (spd.mod_attr & 0x02)
-		sdram_cfg |= SDRAM_CFG_RD_EN;
-
-	/* The DIMM is 32bit width */
-	if (spd.dataw_lsb < 64) {
-		if (spd.mem_type == SPD_MEMTYPE_DDR)
-			sdram_cfg |= SDRAM_CFG_32_BE | SDRAM_CFG_8_BE;
-		if (spd.mem_type == SPD_MEMTYPE_DDR2)
-			sdram_cfg |= SDRAM_CFG_32_BE;
-	}
-
-	ddrc_ecc_enable = 0;
-
-#if defined(CONFIG_DDR_ECC)
-	/* Enable ECC with sdram_cfg[2] */
-	if (spd.config == 0x02) {
-		sdram_cfg |= 0x20000000;
-		ddrc_ecc_enable = 1;
-		/* disable error detection */
-		ddr->err_disable = ~ECC_ERROR_ENABLE;
-		/* set single bit error threshold to maximum value,
-		 * reset counter to zero */
-		ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
-				(0 << ECC_ERROR_MAN_SBEC_SHIFT);
-	}
-
-	debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
-	debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
-#endif
-	debug("   DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
-
-#if defined(CONFIG_DDR_2T_TIMING)
-	/*
-	 * Enable 2T timing by setting sdram_cfg[16].
-	 */
-	sdram_cfg |= SDRAM_CFG_2T_EN;
-#endif
-	/* Enable controller, and GO! */
-	ddr->sdram_cfg = sdram_cfg;
-	asm("sync;isync");
-	udelay(500);
-
-	debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg);
-	return memsize; /*in MBytes*/
-}
-#endif /* CONFIG_SPD_EEPROM */
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-/*
- * Use timebase counter, get_timer() is not availabe
- * at this point of initialization yet.
- */
-static __inline__ unsigned long get_tbms (void)
-{
-	unsigned long tbl;
-	unsigned long tbu1, tbu2;
-	unsigned long ms;
-	unsigned long long tmp;
-
-	ulong tbclk = get_tbclk();
-
-	/* get the timebase ticks */
-	do {
-		asm volatile ("mftbu %0":"=r" (tbu1):);
-		asm volatile ("mftb %0":"=r" (tbl):);
-		asm volatile ("mftbu %0":"=r" (tbu2):);
-	} while (tbu1 != tbu2);
-
-	/* convert ticks to ms */
-	tmp = (unsigned long long)(tbu1);
-	tmp = (tmp << 32);
-	tmp += (unsigned long long)(tbl);
-	ms = tmp/(tbclk/1000);
-
-	return ms;
-}
-
-/*
- * Initialize all of memory for ECC, then enable errors.
- */
-void ddr_enable_ecc(unsigned int dram_size)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile ddr83xx_t *ddr= &immap->ddr;
-	unsigned long t_start, t_end;
-	register u64 *p;
-	register uint size;
-	unsigned int pattern[2];
-
-	icache_enable();
-	t_start = get_tbms();
-	pattern[0] = 0xdeadbeef;
-	pattern[1] = 0xdeadbeef;
-
-#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
-	dma_meminit(pattern[0], dram_size);
-#else
-	debug("ddr init: CPU FP write method\n");
-	size = dram_size;
-	for (p = 0; p < (u64*)(size); p++) {
-		ppcDWstore((u32*)p, pattern);
-	}
-	__asm__ __volatile__ ("sync");
-#endif
-
-	t_end = get_tbms();
-	icache_disable();
-
-	debug("\nREADY!!\n");
-	debug("ddr init duration: %ld ms\n", t_end - t_start);
-
-	/* Clear All ECC Errors */
-	if ((ddr->err_detect & ECC_ERROR_DETECT_MME) == ECC_ERROR_DETECT_MME)
-		ddr->err_detect |= ECC_ERROR_DETECT_MME;
-	if ((ddr->err_detect & ECC_ERROR_DETECT_MBE) == ECC_ERROR_DETECT_MBE)
-		ddr->err_detect |= ECC_ERROR_DETECT_MBE;
-	if ((ddr->err_detect & ECC_ERROR_DETECT_SBE) == ECC_ERROR_DETECT_SBE)
-		ddr->err_detect |= ECC_ERROR_DETECT_SBE;
-	if ((ddr->err_detect & ECC_ERROR_DETECT_MSE) == ECC_ERROR_DETECT_MSE)
-		ddr->err_detect |= ECC_ERROR_DETECT_MSE;
-
-	/* Disable ECC-Interrupts */
-	ddr->err_int_en &= ECC_ERR_INT_DISABLE;
-
-	/* Enable errors for ECC */
-	ddr->err_disable &= ECC_ERROR_ENABLE;
-
-	__asm__ __volatile__ ("sync");
-	__asm__ __volatile__ ("isync");
-}
-#endif	/* CONFIG_DDR_ECC */