Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xx

1 files changed, 39 insertions, 15 deletions

diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 54f0c83..ee2d038 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -34,6 +34,30 @@
 #include <asm/mmu.h>
 #include <spd_sdram.h>
 
+void board_add_ram_info(int use_default)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ddr83xx_t *ddr = &immap->ddr;
+
+	printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK)
+			   >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1);
+
+	if (ddr->sdram_cfg & SDRAM_CFG_32_BE)
+		puts(", 32-bit");
+	else
+		puts(", 64-bit");
+
+	if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
+		puts(", ECC on)");
+	else
+		puts(", ECC off)");
+
+#if defined(CFG_LB_SDRAM) && defined(CFG_LBC_SDRAM_SIZE)
+	puts("\nSDRAM: ");
+	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)");
+#endif
+}
+
 #ifdef CONFIG_SPD_EEPROM
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -109,7 +133,7 @@ long int spd_sdram()
 	unsigned int n_ranks;
 	unsigned int odt_rd_cfg, odt_wr_cfg;
 	unsigned char twr_clk, twtr_clk;
-	unsigned char sdram_type;
+	unsigned int sdram_type;
 	unsigned int memsize;
 	unsigned int law_size;
 	unsigned char caslat, caslat_ctrl;
@@ -137,7 +161,7 @@ long int spd_sdram()
 #endif
 	/* Check the memory type */
 	if (spd.mem_type != SPD_MEMTYPE_DDR && spd.mem_type != SPD_MEMTYPE_DDR2) {
-		printf("DDR: Module mem type is %02X\n", spd.mem_type);
+		debug("DDR: Module mem type is %02X\n", spd.mem_type);
 		return 0;
 	}
 
@@ -578,17 +602,17 @@ long int spd_sdram()
 			burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
 		else
 			burstlen = 0x02; /* 32 bit data bus, burst len is 4 */
-		printf("\n   DDR DIMM: data bus width is 32 bit");
+		debug("\n   DDR DIMM: data bus width is 32 bit");
 	} else {
 		burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
-		printf("\n   DDR DIMM: data bus width is 64 bit");
+		debug("\n   DDR DIMM: data bus width is 64 bit");
 	}
 
 	/* Is this an ECC DDR chip? */
 	if (spd.config == 0x02)
-		printf(" with ECC\n");
+		debug(" with ECC\n");
 	else
-		printf(" without ECC\n");
+		debug(" without ECC\n");
 
 	/* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
 	   Burst type is sequential
@@ -718,26 +742,26 @@ long int spd_sdram()
 	 * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts)
 	 */
 	if (spd.mem_type == SPD_MEMTYPE_DDR)
-		sdram_type = 2;
+		sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1;
 	else
-		sdram_type = 3;
+		sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR2;
 
 	sdram_cfg = (0
-		     | (1 << 31)			/* DDR enable */
-		     | (1 << 30)			/* Self refresh */
-		     | (sdram_type << 24)		/* SDRAM type */
+		     | SDRAM_CFG_MEM_EN		/* DDR enable */
+		     | SDRAM_CFG_SREN		/* Self refresh */
+		     | sdram_type		/* SDRAM type */
 		     );
 
 	/* sdram_cfg[3] = RD_EN - registered DIMM enable */
 	if (spd.mod_attr & 0x02)
-		sdram_cfg |= 0x10000000;
+		sdram_cfg |= SDRAM_CFG_RD_EN;
 
 	/* The DIMM is 32bit width */
 	if (spd.dataw_lsb == 0x20) {
 		if (spd.mem_type == SPD_MEMTYPE_DDR)
-			sdram_cfg |= 0x000C0000;
+			sdram_cfg |= SDRAM_CFG_32_BE | SDRAM_CFG_8_BE;
 		if (spd.mem_type == SPD_MEMTYPE_DDR2)
-			sdram_cfg |= 0x00080000;
+			sdram_cfg |= SDRAM_CFG_32_BE;
 	}
 
 	ddrc_ecc_enable = 0;
@@ -758,7 +782,7 @@ long int spd_sdram()
 	debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
 	debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
 #endif
-	printf("   DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
+	debug("   DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
 
 #if defined(CONFIG_DDR_2T_TIMING)
 	/*