ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 0 insertions, 241 deletions

diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
deleted file mode 100644
index a42b230..0000000
--- a/cpu/mpc83xx/pci.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2007
- *
- * Author: Scott Wood <scottwood@freescale.com>,
- * with some bits from older board-specific PCI initialization.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-#include <asm/mpc8349_pci.h>
-
-#define MAX_BUSES 2
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct pci_controller pci_hose[MAX_BUSES];
-static int pci_num_buses;
-
-static void pci_init_bus(int bus, struct pci_region *reg)
-{
-	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile pot83xx_t *pot = immr->ios.pot;
-	volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus];
-	struct pci_controller *hose = &pci_hose[bus];
-	u32 dev;
-	u16 reg16;
-	int i;
-
-	if (bus == 1)
-		pot += 3;
-
-	/* Setup outbound translation windows */
-	for (i = 0; i < 3; i++, reg++, pot++) {
-		if (reg->size == 0)
-			break;
-
-		hose->regions[i] = *reg;
-		hose->region_count++;
-
-		pot->potar = reg->bus_start >> 12;
-		pot->pobar = reg->phys_start >> 12;
-		pot->pocmr = ~(reg->size - 1) >> 12;
-
-		if (reg->flags & PCI_REGION_IO)
-			pot->pocmr |= POCMR_IO;
-#ifdef CONFIG_83XX_PCI_STREAMING
-		else if (reg->flags & PCI_REGION_PREFETCH)
-			pot->pocmr |= POCMR_SE;
-#endif
-
-		if (bus == 1)
-			pot->pocmr |= POCMR_DST;
-
-		pot->pocmr |= POCMR_EN;
-	}
-
-	/* Point inbound translation at RAM */
-	pci_ctrl->pitar1 = 0;
-	pci_ctrl->pibar1 = 0;
-	pci_ctrl->piebar1 = 0;
-	pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
-	                   PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1));
-
-	i = hose->region_count++;
-	hose->regions[i].bus_start = 0;
-	hose->regions[i].phys_start = 0;
-	hose->regions[i].size = gd->ram_size;
-	hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
-
-	hose->first_busno = pci_last_busno() + 1;
-	hose->last_busno = 0xff;
-
-	pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80,
-	                         CONFIG_SYS_IMMR + 0x8304 + bus * 0x80);
-
-	pci_register_hose(hose);
-
-	/*
-	 * Write to Command register
-	 */
-	reg16 = 0xff;
-	dev = PCI_BDF(hose->first_busno, 0, 0);
-	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
-	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
-	/*
-	 * Clear non-reserved bits in status register.
-	 */
-	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
-	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
-	printf("PCI:   Bus Dev VenId DevId Class Int\n");
-#endif
-#ifndef CONFIG_PCISLAVE
-	/*
-	 * Hose scan.
-	 */
-	hose->last_busno = pci_hose_scan(hose);
-#endif
-}
-
-/*
- * The caller must have already set OCCR, and the PCI_LAW BARs
- * must have been set to cover all of the requested regions.
- *
- * If fewer than three regions are requested, then the region
- * list is terminated with a region of size 0.
- */
-void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot)
-{
-	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
-	int i;
-
-	if (num_buses > MAX_BUSES) {
-		printf("%d PCI buses requsted, %d supported\n",
-		       num_buses, MAX_BUSES);
-
-		num_buses = MAX_BUSES;
-	}
-
-	pci_num_buses = num_buses;
-
-	/*
-	 * Release PCI RST Output signal.
-	 * Power on to RST high must be at least 100 ms as per PCI spec.
-	 * On warm boots only 1 ms is required.
-	 */
-	udelay(warmboot ? 1000 : 100000);
-
-	for (i = 0; i < num_buses; i++)
-		immr->pci_ctrl[i].gcr = 1;
-
-	/*
-	 * RST high to first config access must be at least 2^25 cycles
-	 * as per PCI spec.  This could be cut in half if we know we're
-	 * running at 66MHz.  This could be insufficiently long if we're
-	 * running the PCI bus at significantly less than 33MHz.
-	 */
-	udelay(1020000);
-
-	for (i = 0; i < num_buses; i++)
-		pci_init_bus(i, reg[i]);
-}
-
-#ifdef CONFIG_PCISLAVE
-
-#define PCI_FUNCTION_CONFIG	0x44
-#define PCI_FUNCTION_CFG_LOCK	0x20
-
-/*
- * Unlock the configuration bit so that the host system can begin booting
- *
- * This should be used after you have:
- * 1) Called mpc83xx_pci_init()
- * 2) Set up your inbound translation windows to the appropriate size
- */
-void mpc83xx_pcislave_unlock(int bus)
-{
-	struct pci_controller *hose = &pci_hose[bus];
-	u32 dev;
-	u16 reg16;
-
-	/* Unlock configuration lock in PCI function configuration register */
-	dev = PCI_BDF(hose->first_busno, 0, 0);
-	pci_hose_read_config_word (hose, dev, PCI_FUNCTION_CONFIG, &reg16);
-	reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
-	pci_hose_write_config_word (hose, dev, PCI_FUNCTION_CONFIG, reg16);
-
-	/* The configuration bit is now unlocked, so we can scan the bus */
-	hose->last_busno = pci_hose_scan(hose);
-}
-#endif
-
-#if defined(CONFIG_OF_LIBFDT)
-void ft_pci_setup(void *blob, bd_t *bd)
-{
-	int nodeoffset;
-	int tmp[2];
-	const char *path;
-
-	if (pci_num_buses < 1)
-		return;
-
-	nodeoffset = fdt_path_offset(blob, "/aliases");
-	if (nodeoffset >= 0) {
-		path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
-		if (path) {
-			tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
-			tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
-			do_fixup_by_path(blob, path, "bus-range",
-				&tmp, sizeof(tmp), 1);
-
-			tmp[0] = cpu_to_be32(gd->pci_clk);
-			do_fixup_by_path(blob, path, "clock-frequency",
-				&tmp, sizeof(tmp[0]), 1);
-		}
-
-		if (pci_num_buses < 2)
-			return;
-
-		path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
-		if (path) {
-			tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
-			tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
-			do_fixup_by_path(blob, path, "bus-range",
-				&tmp, sizeof(tmp), 1);
-
-			tmp[0] = cpu_to_be32(gd->pci_clk);
-			do_fixup_by_path(blob, path, "clock-frequency",
-				&tmp, sizeof(tmp[0]), 1);
-		}
-	}
-}
-#endif /* CONFIG_OF_LIBFDT */