NAND boot: MPC8313ERDB support

Note that with older board revisions, NAND boot may only work after a
power-on reset, and not after a warm reset.  I don't have a newer board
to test on; if you have a board with a 33MHz crystal, please let me know
if it works after a warm reset.

Signed-off-by: Scott Wood <scottwood@freescale.com>

1 files changed, 112 insertions, 0 deletions

diff --git a/cpu/mpc83xx/nand_init.c b/cpu/mpc83xx/nand_init.c
new file mode 100644
index 0000000..e92f230
--- /dev/null
+++ b/cpu/mpc83xx/nand_init.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Breathe some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f (volatile immap_t * im)
+{
+	int i;
+
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+
+	/* Clear initial global data */
+	for (i = 0; i < sizeof(gd_t); i++)
+		((char *)gd)[i] = 0;
+
+	/* system performance tweaking */
+
+#ifdef CFG_ACR_PIPE_DEP
+	/* Arbiter pipeline depth */
+	im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
+			  (CFG_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
+#endif
+
+#ifdef CFG_ACR_RPTCNT
+	/* Arbiter repeat count */
+	im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
+			  (CFG_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
+#endif
+
+#ifdef CFG_SPCR_OPT
+	/* Optimize transactions between CSB and other devices */
+	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
+			   (CFG_SPCR_OPT << SPCR_OPT_SHIFT);
+#endif
+
+	/* Enable Time Base & Decrimenter (so we will have udelay()) */
+	im->sysconf.spcr |= SPCR_TBEN;
+
+	/* DDR control driver register */
+#ifdef CFG_DDRCDR
+	im->sysconf.ddrcdr = CFG_DDRCDR;
+#endif
+	/* Output buffer impedance register */
+#ifdef CFG_OBIR
+	im->sysconf.obir = CFG_OBIR;
+#endif
+
+	/*
+	 * Memory Controller:
+	 */
+
+	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
+	 * addresses - these have to be modified later when FLASH size
+	 * has been determined
+	 */
+
+#if defined(CFG_NAND_BR_PRELIM)  \
+	&& defined(CFG_NAND_OR_PRELIM) \
+	&& defined(CFG_NAND_LBLAWBAR_PRELIM) \
+	&& defined(CFG_NAND_LBLAWAR_PRELIM)
+	im->lbus.bank[0].br = CFG_NAND_BR_PRELIM;
+	im->lbus.bank[0].or = CFG_NAND_OR_PRELIM;
+	im->sysconf.lblaw[0].bar = CFG_NAND_LBLAWBAR_PRELIM;
+	im->sysconf.lblaw[0].ar = CFG_NAND_LBLAWAR_PRELIM;
+#else
+#error CFG_NAND_BR_PRELIM, CFG_NAND_OR_PRELIM, CFG_NAND_LBLAWBAR_PRELIM & CFG_NAND_LBLAWAR_PRELIM must be defined
+#endif
+}
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ */
+unsigned long get_tbclk(void)
+{
+	return (gd->bus_clk + 3L) / 4L;
+}
+
+void puts(const char *str)
+{
+	while (*str)
+		putc(*str++);
+}