Merge git://git.denx.de/u-boot into x1

Conflicts:

	drivers/usb/usb_ohci.c

1 files changed, 12 insertions, 11 deletions

diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 5862acd..05c2f33 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -67,7 +67,7 @@ int checkcpu(void)
 		CPU_TYPE_ENTRY(8379),
 	};
 
-	immr = (immap_t *)CFG_IMMR;
+	immr = (immap_t *)CONFIG_SYS_IMMR;
 
 	puts("CPU:   ");
 
@@ -124,8 +124,8 @@ int checkcpu(void)
  * The 'dummy' variable is used to increment the MAD. 'dummy' is
  * supposed to be a pointer to the memory of the device being
  * programmed by the UPM.  The data in the MDR is written into
- * memory and the MAD is incremented every time there's a read
- * from 'dummy'. Unfortunately, the current prototype for this
+ * memory and the MAD is incremented every time there's a write
+ * to 'dummy'. Unfortunately, the current prototype for this
  * function doesn't allow for passing the address of this
  * device, and changing the prototype will break a number lots
  * of other code, so we need to use a round-about way of finding
@@ -148,7 +148,7 @@ int checkcpu(void)
 void upmconfig (uint upm, uint *table, uint size)
 {
 #if defined(CONFIG_MPC834X)
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile lbus83xx_t *lbus = &immap->lbus;
 	volatile uchar *dummy = NULL;
 	const u32 msel = (upm + 4) << BR_MSEL_SHIFT;	/* What the MSEL field in BRn should be */
@@ -174,8 +174,9 @@ void upmconfig (uint upm, uint *table, uint size)
 	for (i = 0; i < size; i++) {
 		lbus->mdr = table[i];
 		__asm__ __volatile__ ("sync");
-		*dummy;	/* Write the value to memory and increment MAD */
+		*dummy = 0;	/* Write the value to memory and increment MAD */
 		__asm__ __volatile__ ("sync");
+		while(((*mxmr & 0x3f) != ((i + 1) & 0x3f)));
 	}
 
 	/* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
@@ -195,7 +196,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	ulong addr;
 #endif
 
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 #ifdef MPC83xx_RESET
 	/* Interrupts and MMU off */
@@ -234,7 +235,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	 * Trying to execute the next instruction at a non-existing address
 	 * should cause a machine check, resulting in reset
 	 */
-	addr = CFG_RESET_ADDRESS;
+	addr = CONFIG_SYS_RESET_ADDRESS;
 
 	printf("resetting the board.");
 	printf("\n");
@@ -265,7 +266,7 @@ void watchdog_reset (void)
 	int re_enable = disable_interrupts();
 
 	/* Reset the 83xx watchdog */
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	immr->wdt.swsrr = 0x556c;
 	immr->wdt.swsrr = 0xaa39;
 
@@ -277,7 +278,7 @@ void watchdog_reset (void)
 #if defined(CONFIG_DDR_ECC)
 void dma_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile dma83xx_t *dma = &immap->dma;
 	volatile u32 status = swab32(dma->dmasr0);
 	volatile u32 dmamr0 = swab32(dma->dmamr0);
@@ -308,7 +309,7 @@ void dma_init(void)
 
 uint dma_check(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile dma83xx_t *dma = &immap->dma;
 	volatile u32 status = swab32(dma->dmasr0);
 	volatile u32 byte_count = swab32(dma->dmabcr0);
@@ -327,7 +328,7 @@ uint dma_check(void)
 
 int dma_xfer(void *dest, u32 count, void *src)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile dma83xx_t *dma = &immap->dma;
 	volatile u32 dmamr0;