Merge 'next' branch

Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

7 files changed, 67 insertions, 67 deletions

diff --git a/cpu/mpc8220/cpu.c b/cpu/mpc8220/cpu.c
index be274cd..5b3fdd3 100644
--- a/cpu/mpc8220/cpu.c
+++ b/cpu/mpc8220/cpu.c
@@ -42,7 +42,7 @@ int checkcpu (void)
 
 	printf (CPU_ID_STR);
 
-	printf (" (JTAG ID %08lx)", *(vu_long *) (CFG_MBAR + 0x50));
+	printf (" (JTAG ID %08lx)", *(vu_long *) (CONFIG_SYS_MBAR + 0x50));
 
 	printf (" at %s MHz\n", strmhz (buf, clock));
 
diff --git a/cpu/mpc8220/cpu_init.c b/cpu/mpc8220/cpu_init.c
index 0daac5b..8f52c7d 100644
--- a/cpu/mpc8220/cpu_init.c
+++ b/cpu/mpc8220/cpu_init.c
@@ -39,7 +39,7 @@ void cpu_init_f (void)
 	volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB;
 
 	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
@@ -49,54 +49,54 @@ void cpu_init_f (void)
 	portcfg->pcfg1 = 0;
 	portcfg->pcfg2 = 0;
 	portcfg->pcfg3 = 0;
-	portcfg->pcfg2 = CFG_GP1_PORT2_CONFIG;
-	portcfg->pcfg3 = CFG_PCI_PORT3_CONFIG | CFG_GP2_PORT3_CONFIG;
+	portcfg->pcfg2 = CONFIG_SYS_GP1_PORT2_CONFIG;
+	portcfg->pcfg3 = CONFIG_SYS_PCI_PORT3_CONFIG | CONFIG_SYS_GP2_PORT3_CONFIG;
 
 	/*
 	 * Flexbus Controller: configure chip selects and enable them
 	 */
-#if defined (CFG_CS0_BASE)
-	flexbus->csar0 = CFG_CS0_BASE;
+#if defined (CONFIG_SYS_CS0_BASE)
+	flexbus->csar0 = CONFIG_SYS_CS0_BASE;
 
 /* Sorcery-C can hang-up after CTRL reg initialization */
-#if defined (CFG_CS0_CTRL)
-	flexbus->cscr0 = CFG_CS0_CTRL;
+#if defined (CONFIG_SYS_CS0_CTRL)
+	flexbus->cscr0 = CONFIG_SYS_CS0_CTRL;
 #endif
-	flexbus->csmr0 = ((CFG_CS0_MASK - 1) & 0xffff0000) | 1;
+	flexbus->csmr0 = ((CONFIG_SYS_CS0_MASK - 1) & 0xffff0000) | 1;
 	__asm__ volatile ("sync");
 #endif
-#if defined (CFG_CS1_BASE)
-	flexbus->csar1 = CFG_CS1_BASE;
-	flexbus->cscr1 = CFG_CS1_CTRL;
-	flexbus->csmr1 = ((CFG_CS1_MASK - 1) & 0xffff0000) | 1;
+#if defined (CONFIG_SYS_CS1_BASE)
+	flexbus->csar1 = CONFIG_SYS_CS1_BASE;
+	flexbus->cscr1 = CONFIG_SYS_CS1_CTRL;
+	flexbus->csmr1 = ((CONFIG_SYS_CS1_MASK - 1) & 0xffff0000) | 1;
 	__asm__ volatile ("sync");
 #endif
-#if defined (CFG_CS2_BASE)
-	flexbus->csar2 = CFG_CS2_BASE;
-	flexbus->cscr2 = CFG_CS2_CTRL;
-	flexbus->csmr2 = ((CFG_CS2_MASK - 1) & 0xffff0000) | 1;
-	portcfg->pcfg3 |= CFG_CS2_PORT3_CONFIG;
+#if defined (CONFIG_SYS_CS2_BASE)
+	flexbus->csar2 = CONFIG_SYS_CS2_BASE;
+	flexbus->cscr2 = CONFIG_SYS_CS2_CTRL;
+	flexbus->csmr2 = ((CONFIG_SYS_CS2_MASK - 1) & 0xffff0000) | 1;
+	portcfg->pcfg3 |= CONFIG_SYS_CS2_PORT3_CONFIG;
 	__asm__ volatile ("sync");
 #endif
-#if defined (CFG_CS3_BASE)
-	flexbus->csar3 = CFG_CS3_BASE;
-	flexbus->cscr3 = CFG_CS3_CTRL;
-	flexbus->csmr3 = ((CFG_CS3_MASK - 1) & 0xffff0000) | 1;
-	portcfg->pcfg3 |= CFG_CS3_PORT3_CONFIG;
+#if defined (CONFIG_SYS_CS3_BASE)
+	flexbus->csar3 = CONFIG_SYS_CS3_BASE;
+	flexbus->cscr3 = CONFIG_SYS_CS3_CTRL;
+	flexbus->csmr3 = ((CONFIG_SYS_CS3_MASK - 1) & 0xffff0000) | 1;
+	portcfg->pcfg3 |= CONFIG_SYS_CS3_PORT3_CONFIG;
 	__asm__ volatile ("sync");
 #endif
-#if defined (CFG_CS4_BASE)
-	flexbus->csar4 = CFG_CS4_BASE;
-	flexbus->cscr4 = CFG_CS4_CTRL;
-	flexbus->csmr4 = ((CFG_CS4_MASK - 1) & 0xffff0000) | 1;
-	portcfg->pcfg3 |= CFG_CS4_PORT3_CONFIG;
+#if defined (CONFIG_SYS_CS4_BASE)
+	flexbus->csar4 = CONFIG_SYS_CS4_BASE;
+	flexbus->cscr4 = CONFIG_SYS_CS4_CTRL;
+	flexbus->csmr4 = ((CONFIG_SYS_CS4_MASK - 1) & 0xffff0000) | 1;
+	portcfg->pcfg3 |= CONFIG_SYS_CS4_PORT3_CONFIG;
 	__asm__ volatile ("sync");
 #endif
-#if defined (CFG_CS5_BASE)
-	flexbus->csar5 = CFG_CS5_BASE;
-	flexbus->cscr5 = CFG_CS5_CTRL;
-	flexbus->csmr5 = ((CFG_CS5_MASK - 1) & 0xffff0000) | 1;
-	portcfg->pcfg3 |= CFG_CS5_PORT3_CONFIG;
+#if defined (CONFIG_SYS_CS5_BASE)
+	flexbus->csar5 = CONFIG_SYS_CS5_BASE;
+	flexbus->cscr5 = CONFIG_SYS_CS5_CTRL;
+	flexbus->csmr5 = ((CONFIG_SYS_CS5_MASK - 1) & 0xffff0000) | 1;
+	portcfg->pcfg3 |= CONFIG_SYS_CS5_PORT3_CONFIG;
 	__asm__ volatile ("sync");
 #endif
 
diff --git a/cpu/mpc8220/dramSetup.c b/cpu/mpc8220/dramSetup.c
index 08e3172..52cf133 100644
--- a/cpu/mpc8220/dramSetup.c
+++ b/cpu/mpc8220/dramSetup.c
@@ -34,9 +34,9 @@ characteristics to initialize the dram on MPC8220
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define SPD_SIZE	CFG_SDRAM_SPD_SIZE
-#define DRAM_SPD	(CFG_SDRAM_SPD_I2C_ADDR)<<1	/* on Board SPD eeprom */
-#define TOTAL_BANK	CFG_SDRAM_TOTAL_BANKS
+#define SPD_SIZE	CONFIG_SYS_SDRAM_SPD_SIZE
+#define DRAM_SPD	(CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1	/* on Board SPD eeprom */
+#define TOTAL_BANK	CONFIG_SYS_SDRAM_TOTAL_BANKS
 
 int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse)
 {
@@ -103,7 +103,7 @@ int readSpdData (u8 * spdData)
 	/* Enable Port Configuration for SDA and SDL signals */
 	pcfg = (volatile pcfg8220_t *) (MMAP_PCFG);
 	__asm__ ("sync");
-	pcfg->pcfg3 &= ~CFG_I2C_PORT3_CONFIG;
+	pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG;
 	__asm__ ("sync");
 
 	/* Points the structure to I2c mbar memory offset */
@@ -144,7 +144,7 @@ int readSpdData (u8 * spdData)
 		break;
 	}
 
-	pi2cReg->adr = CFG_I2C_SLAVE<<1;
+	pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1;
 
 	pi2cReg->cr = I2C_CTL_EN;	/* Set Enable         */
 
@@ -541,7 +541,7 @@ u32 dramSetup (void)
 	}
 
 	/* Set up the Drive Strength register */
-	sysconf->sdramds = CFG_SDRAM_DRIVE_STRENGTH;
+	sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH;
 
 	/* ********************** Cfg 1 ************************* */
 
@@ -679,7 +679,7 @@ u32 dramSetup (void)
 
 
 	/* Set up mode value for CAS latency */
-#if (CFG_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
+#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
 	mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
 		MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD);
 #else
diff --git a/cpu/mpc8220/interrupts.c b/cpu/mpc8220/interrupts.c
index 036378c..78e9917 100644
--- a/cpu/mpc8220/interrupts.c
+++ b/cpu/mpc8220/interrupts.c
@@ -34,7 +34,7 @@
 
 int interrupt_init_cpu (ulong * decrementer_count)
 {
-	*decrementer_count = get_tbclk () / CFG_HZ;
+	*decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
 
 	return (0);
 }
diff --git a/cpu/mpc8220/pci.c b/cpu/mpc8220/pci.c
index 4ef214e..a78a828 100644
--- a/cpu/mpc8220/pci.c
+++ b/cpu/mpc8220/pci.c
@@ -33,8 +33,8 @@
 #if defined(CONFIG_PCI)
 
 /* System RAM mapped over PCI */
-#define CONFIG_PCI_SYS_MEM_BUS	 CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	 CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_BUS	 CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	 CONFIG_SYS_SDRAM_BASE
 #define CONFIG_PCI_SYS_MEM_SIZE	 (1024 * 1024 * 1024)
 
 #define cfg_read(val, addr, type, op)		*val = op((type)(addr));
diff --git a/cpu/mpc8220/speed.c b/cpu/mpc8220/speed.c
index 200a762..c01ca0c 100644
--- a/cpu/mpc8220/speed.c
+++ b/cpu/mpc8220/speed.c
@@ -67,25 +67,25 @@ int get_clocks (void)
 	u32 hid1;
 	int i, size, pci2bus;
 
-#if !defined(CFG_MPC8220_CLKIN)
-#error clock measuring not implemented yet - define CFG_MPC8220_CLKIN
+#if !defined(CONFIG_SYS_MPC8220_CLKIN)
+#error clock measuring not implemented yet - define CONFIG_SYS_MPC8220_CLKIN
 #endif
 
-	gd->inp_clk = CFG_MPC8220_CLKIN;
+	gd->inp_clk = CONFIG_SYS_MPC8220_CLKIN;
 
 	/* Read XLB to PCI(INP) clock multiplier */
 	pci2bus = (*((volatile u32 *)PCI_REG_PCIGSCR) &
 		PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK)>>PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT;
 
 	/* XLB bus clock */
-	gd->bus_clk = CFG_MPC8220_CLKIN * pci2bus;
+	gd->bus_clk = CONFIG_SYS_MPC8220_CLKIN * pci2bus;
 
 	/* PCI clock is same as input clock */
-	gd->pci_clk = CFG_MPC8220_CLKIN;
+	gd->pci_clk = CONFIG_SYS_MPC8220_CLKIN;
 
 	/* FlexBus is temporary set as the same as input clock */
 	/* will do dynamic in the future */
-	gd->flb_clk = CFG_MPC8220_CLKIN;
+	gd->flb_clk = CONFIG_SYS_MPC8220_CLKIN;
 
 	/* CPU Clock - Read HID1 */
 	asm volatile ("mfspr %0, 1009":"=r" (hid1):);
@@ -97,7 +97,7 @@ int get_clocks (void)
 	for (i = 0; i < size; i++)
 		if (hid1 == bus2core[i].hid1) {
 			gd->cpu_clk = (bus2core[i].multi * gd->bus_clk) >> 1;
-			gd->vco_clk = CFG_MPC8220_SYSPLL_VCO_MULTIPLIER * (gd->pci_clk * bus2core[i].vco_div)/2;
+			gd->vco_clk = CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER * (gd->pci_clk * bus2core[i].vco_div)/2;
 			break;
 		}
 
diff --git a/cpu/mpc8220/start.S b/cpu/mpc8220/start.S
index b5145ca..373be2c 100644
--- a/cpu/mpc8220/start.S
+++ b/cpu/mpc8220/start.S
@@ -105,16 +105,16 @@ boot_warm:
 	/* replace default MBAR base address from 0x80000000
 	    to 0xf0000000 */
 
-#if defined(CFG_DEFAULT_MBAR) && !defined(CFG_RAMBOOT)
-	lis	r3, CFG_MBAR@h
-	ori	r3, r3, CFG_MBAR@l
+#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
+	lis	r3, CONFIG_SYS_MBAR@h
+	ori	r3, r3, CONFIG_SYS_MBAR@l
 
 	/* MBAR is mirrored into the MBAR SPR */
 	mtspr	MBAR,r3
 	mtspr	SPRN_SPRG7W,r3
-	lis	r4, CFG_DEFAULT_MBAR@h
+	lis	r4, CONFIG_SYS_DEFAULT_MBAR@h
 	stw	r3, 0(r4)
-#endif /* CFG_DEFAULT_MBAR */
+#endif /* CONFIG_SYS_DEFAULT_MBAR */
 
 	/* Initialise the MPC8220 processor core			*/
 	/*--------------------------------------------------------------*/
@@ -125,9 +125,9 @@ boot_warm:
 	/*--------------------------------------------------------------*/
 
 	/* set up stack in on-chip SRAM */
-	lis	r3, CFG_INIT_RAM_ADDR@h
-	ori	r3, r3, CFG_INIT_RAM_ADDR@l
-	ori	r1, r3, CFG_INIT_SP_OFFSET
+	lis	r3, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
+	ori	r1, r3, CONFIG_SYS_INIT_SP_OFFSET
 
 	li	r0, 0		/* Make room for stack frame header and */
 	stwu	r0, -4(r1)	/* clear final stack frame so that	*/
@@ -361,13 +361,13 @@ init_8220_core:
 	/* HID0 also contains cache control				*/
 	/*--------------------------------------------------------------*/
 
-	lis	r3, CFG_HID0_INIT@h
-	ori	r3, r3, CFG_HID0_INIT@l
+	lis	r3, CONFIG_SYS_HID0_INIT@h
+	ori	r3, r3, CONFIG_SYS_HID0_INIT@l
 	SYNC
 	mtspr	HID0, r3
 
-	lis	r3, CFG_HID0_FINAL@h
-	ori	r3, r3, CFG_HID0_FINAL@l
+	lis	r3, CONFIG_SYS_HID0_FINAL@h
+	ori	r3, r3, CONFIG_SYS_HID0_FINAL@l
 	SYNC
 	mtspr	HID0, r3
 
@@ -458,7 +458,7 @@ init_8220_core:
 	.globl	icache_enable
 icache_enable:
 	lis	r4, 0
-	ori	r4, r4, CFG_HID0_INIT /* set ICE & ICFI bit		*/
+	ori	r4, r4, CONFIG_SYS_HID0_INIT /* set ICE & ICFI bit		*/
 	rlwinm	r3, r4, 0, 21, 19     /* clear the ICFI bit		*/
 
 	/*
@@ -547,16 +547,16 @@ relocate_code:
 	mr	r10, r5	    /* Save copy of Destination Address */
 
 	mr	r3,  r5	    /* Destination Address		*/
-	lis	r4, CFG_MONITOR_BASE@h	/* Source Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h	/* Source Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE	/* Cache Line Size	*/
+	li	r6, CONFIG_SYS_CACHELINE_SIZE	/* Cache Line Size	*/
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */