ColdFire: Add M54455EVB for MCF5445x

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>

1 files changed, 186 insertions, 0 deletions

diff --git a/cpu/mcf5445x/speed.c b/cpu/mcf5445x/speed.c
new file mode 100644
index 0000000..967becf
--- /dev/null
+++ b/cpu/mcf5445x/speed.c
@@ -0,0 +1,186 @@
+/*
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Low Power Divider specifications
+ */
+#define CLOCK_LPD_MIN		(1 << 0)	/* Divider (decoded) */
+#define CLOCK_LPD_MAX		(1 << 15)	/* Divider (decoded) */
+
+#define CLOCK_PLL_FVCO_MAX	540000000
+#define CLOCK_PLL_FVCO_MIN	300000000
+
+#define CLOCK_PLL_FSYS_MAX	266666666
+#define CLOCK_PLL_FSYS_MIN	100000000
+#define MHZ			1000000
+
+void clock_enter_limp(int lpdiv)
+{
+	volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM;
+	int i, j;
+
+	/* Check bounds of divider */
+	if (lpdiv < CLOCK_LPD_MIN)
+		lpdiv = CLOCK_LPD_MIN;
+	if (lpdiv > CLOCK_LPD_MAX)
+		lpdiv = CLOCK_LPD_MAX;
+
+	/* Round divider down to nearest power of two */
+	for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ;
+
+	/* Apply the divider to the system clock */
+	ccm->cdr = (ccm->cdr & 0xF0FF) | CCM_CDR_LPDIV(i);
+
+	/* Enable Limp Mode */
+	ccm->misccr |= CCM_MISCCR_LIMP;
+}
+
+/*
+ * brief   Exit Limp mode
+ * warning The PLL should be set and locked prior to exiting Limp mode
+ */
+void clock_exit_limp(void)
+{
+	volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM;
+	volatile pll_t *pll = (volatile pll_t *)MMAP_PLL;
+
+	/* Exit Limp mode */
+	ccm->misccr &= ~CCM_MISCCR_LIMP;
+
+	/* Wait for the PLL to lock */
+	while (!(pll->psr & PLL_PSR_LOCK)) ;
+}
+
+/*
+ * get_clocks() fills in gd->cpu_clock and gd->bus_clk
+ */
+int get_clocks(void)
+{
+	volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM;
+	volatile pll_t *pll = (volatile pll_t *)MMAP_PLL;
+	volatile u8 *cpld = (volatile u8 *)(CFG_CS2_BASE + 3);
+	volatile u8 *fpga = (volatile u8 *)(CFG_CS3_BASE + 14);
+	int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 };
+	int pllmult_pci[] = { 12, 6, 16, 8 };
+	int vco, bPci, temp, fbtemp, pcrvalue;
+	int *pPllmult = NULL;
+	u16 fbpll_mask;
+	u8 cpldmode;
+
+	/* To determine PCI is present or not */
+	if (((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x00e0) ||
+	    ((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) {
+		pPllmult = &pllmult_pci[0];
+		fbpll_mask = 3;
+		bPci = 1;
+	} else {
+		pPllmult = &pllmult_nopci[0];
+		fbpll_mask = 7;
+#ifdef CONFIG_PCI
+		gd->pci_clk = 0;
+#endif
+		bPci = 0;
+	}
+
+#ifdef CONFIG_M54455EVB
+	/* Temporary place here, belongs in board/freescale/... */
+	/* Temporary read from CCR- fixed fb issue, must be the same clock
+	   as pci or input clock, causing cpld/fpga read inconsistancy */
+	fbtemp = pPllmult[ccm->ccr & fbpll_mask];
+
+	/* Break down into small pieces, code still in flex bus */
+	pcrvalue = pll->pcr & 0xFFFFF0FF;
+	temp = fbtemp - 1;
+	pcrvalue |= PLL_PCR_OUTDIV3(temp);
+
+	pll->pcr = pcrvalue;
+
+	cpldmode = *cpld & 0x03;
+	if (cpldmode == 0) {
+		/* RCON mode */
+		vco = pPllmult[ccm->rcon & fbpll_mask] * CFG_INPUT_CLKSRC;
+
+		if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) {
+			/* invaild range, re-set in PCR */
+			int temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1;
+			int i, j, bus;
+
+			j = (pll->pcr & 0xFF000000) >> 24;
+			for (i = j; i < 0xFF; i++) {
+				vco = i * CFG_INPUT_CLKSRC;
+				if (vco >= CLOCK_PLL_FVCO_MIN) {
+					bus = vco / temp;
+					if (bus <= CLOCK_PLL_FSYS_MIN - MHZ)
+						continue;
+					else
+						break;
+				}
+			}
+			pcrvalue = pll->pcr & 0x00FF00FF;
+			fbtemp = ((i - 1) << 8) | ((i - 1) << 12);
+			pcrvalue |= ((i << 24) | fbtemp);
+
+			pll->pcr = pcrvalue;
+		}
+		gd->vco_clk = vco;	/* Vco clock */
+	} else if (cpldmode == 2) {
+		/* Normal mode */
+		vco = pPllmult[ccm->ccr & fbpll_mask] * CFG_INPUT_CLKSRC;
+		gd->vco_clk = vco;	/* Vco clock */
+	} else if (cpldmode == 3) {
+		/* serial mode */
+	}
+#endif				/* CONFIG_M54455EVB */
+
+	if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
+		/* Limp mode */
+	} else {
+		gd->inp_clk = CFG_INPUT_CLKSRC;	/* Input clock */
+
+		temp = (pll->pcr & PLL_PCR_OUTDIV1_MASK) + 1;
+		gd->cpu_clk = vco / temp;	/* cpu clock */
+
+		temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1;
+		gd->bus_clk = vco / temp;	/* bus clock */
+
+		temp = ((pll->pcr & PLL_PCR_OUTDIV3_MASK) >> 8) + 1;
+		gd->flb_clk = vco / temp;	/* FlexBus clock */
+
+#ifdef CONFIG_PCI
+		if (bPci) {
+			temp = ((pll->pcr & PLL_PCR_OUTDIV4_MASK) >> 12) + 1;
+			gd->pci_clk = vco / temp;	/* PCI clock */
+		}
+#endif
+	}
+
+	return (0);
+}