Merge with /home/hs/U-Boot/u-boot-dev

1 files changed, 51 insertions, 22 deletions

diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c
index 1011788..8be09e3 100644
--- a/cpu/mcf52x2/serial.c
+++ b/cpu/mcf52x2/serial.c
@@ -55,45 +55,75 @@ void rs_serial_setbaudrate(int port,int baudrate)
 {
 #if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5271)
 	volatile unsigned char	*uartp;
-#ifndef CONFIG_M5271
+# ifndef CONFIG_M5271
 	double fraction;
-#endif
+# endif
 	double clock;
 
 	if (port == 0)
-	  uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
 	else
-	  uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
 
-	clock = DoubleClock(baudrate);      /* Set baud above */
+	clock = DoubleClock(baudrate);	/* Set baud above */
 
-	uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff);  /* set msb baud */
-	uartp[MCFUART_UBG2] = ((int)clock & 0xff);  /* set lsb baud */
+	uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff);	/* set msb baud */
+	uartp[MCFUART_UBG2] = ((int)clock & 0xff);		/* set lsb baud */
 
-#ifndef CONFIG_M5271
+# ifndef CONFIG_M5271
 	fraction = ((clock - (int)clock) * 16.0) + 0.5;
-	uartp[MCFUART_UFPD] = ((int)fraction & 0xf);  /* set baud fraction adjust */
+	uartp[MCFUART_UFPD] = ((int)fraction & 0xf);	/* set baud fraction adjust */
+# endif
 #endif
+
+#if  defined(CONFIG_M5282)
+	volatile unsigned char	*uartp;
+	long clock;
+
+	switch (port) {
+	case 1:
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
+		break;
+	case 2:
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3);
+		break;
+	default:
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+	}
+
+	clock = (long) CFG_CLK / ((long) 32 * baudrate);	/* Set baud above */
+
+	uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff);	/* set msb baud */
+	uartp[MCFUART_UBG2] = ((int) clock & 0xff);		/* set lsb baud */
+
 #endif
 };
 
-void rs_serial_init(int port,int baudrate)
+void rs_serial_init (int port, int baudrate)
 {
-	volatile unsigned char	*uartp;
+	volatile unsigned char *uartp;
 
 	/*
-	 *	Reset UART, get it into known state...
+	 *      Reset UART, get it into known state...
 	 */
-	if (port == 0)
-		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
-	else
+	switch (port) {
+	case 1:
 		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
+		break;
+#if  defined(CONFIG_M5282)
+	case 2:
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3);
+		break;
+#endif
+	default:
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+	}
 
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX;  /* reset TX */
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;  /* reset RX */
+	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX;	/* reset TX */
+	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;	/* reset RX */
 
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR;  /* reset MR pointer */
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR;  /* reset Error pointer */
+	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR;	/* reset MR pointer */
+	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR;	/* reset Error pointer */
 
 	/*
 	 * Set port for CONSOLE_BAUD_RATE, 8 data bits, 1 stop bit, no parity.
@@ -107,7 +137,7 @@ void rs_serial_init(int port,int baudrate)
 	/* Set clock Select Register: Tx/Rx clock is timer */
 	uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
 
-	rs_serial_setbaudrate(port,baudrate);
+	rs_serial_setbaudrate (port, baudrate);
 
 	/* Enable Tx/Rx */
 	uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
@@ -169,9 +199,8 @@ void serial_putc(const char c) {
 }
 
 void serial_puts (const char *s) {
-	while (*s) {
+	while (*s)
 		serial_putc(*s++);
-	}
 }
 
 int serial_getc(void) {