arm: Move cpu/$CPU to arch/arm/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 0 insertions, 783 deletions

diff --git a/cpu/ixp/npe/include/IxTimeSyncAcc.h b/cpu/ixp/npe/include/IxTimeSyncAcc.h
deleted file mode 100644
index 25effed..0000000
--- a/cpu/ixp/npe/include/IxTimeSyncAcc.h
+++ /dev/null
@@ -1,783 +0,0 @@
-/**
- * @file IxTimeSyncAcc.h
- *
- * @author Intel Corporation
- * @date 07 May 2004
- *
- * @brief  Header file for IXP400 Access Layer to IEEE 1588(TM) Precision
- * Clock Synchronisation Protocol Hardware Assist
- *
- * @version 1
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Intel Corporation nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * @par
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxTimeSyncAcc IXP400 Time Sync Access Component API 
- *
- * @brief Public API for IxTimeSyncAcc
- *
- * @{
- */
-#ifndef IXTIMESYNCACC_H
-#define IXTIMESYNCACC_H
-
-#ifdef  __ixp46X
-
-#include "IxOsal.h"
-
-/**
- * Section for enum
- */
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @enum IxTimeSyncAccStatus
- *
- * @brief The status as returned from the API
- */
-typedef enum /**< IxTimeSyncAccStatus */
-{
-    IX_TIMESYNCACC_SUCCESS = IX_SUCCESS,    /**< Requested operation successful */
-    IX_TIMESYNCACC_INVALIDPARAM,            /**< An invalid parameter was passed */
-    IX_TIMESYNCACC_NOTIMESTAMP,             /**< While polling no time stamp available */
-    IX_TIMESYNCACC_INTERRUPTMODEINUSE,      /**< Polling not allowed while operating in interrupt mode */
-    IX_TIMESYNCACC_FAILED                   /**< Internal error occurred */
-}IxTimeSyncAccStatus;
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @enum IxTimeSyncAccAuxMode
- *
- * @brief Master or Slave Auxiliary Time Stamp (Snap Shot)
- */
-typedef enum /**< IxTimeSyncAccAuxMode */
-{
-    IX_TIMESYNCACC_AUXMODE_MASTER,          /**< Auxiliary Master Mode */
-    IX_TIMESYNCACC_AUXMODE_SLAVE,           /**< Auxiliary Slave Mode */
-    IX_TIMESYNCACC_AUXMODE_INVALID          /**< Invalid Auxiliary Mode */
-}IxTimeSyncAccAuxMode;
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @enum IxTimeSyncAcc1588PTPPort
- *
- * @brief IEEE 1588 PTP Communication Port(Channel)
- */
-typedef enum /**< IxTimeSyncAcc1588PTPPort */
-{
-    IX_TIMESYNCACC_NPE_A_1588PTP_PORT,      /**< PTP Communication Port on NPE-A */
-    IX_TIMESYNCACC_NPE_B_1588PTP_PORT,      /**< PTP Communication Port on NPE-B */
-    IX_TIMESYNCACC_NPE_C_1588PTP_PORT,      /**< PTP Communication Port on NPE-C */
-    IX_TIMESYNCACC_NPE_1588PORT_INVALID     /**< Invalid PTP Communication Port */
-} IxTimeSyncAcc1588PTPPort;
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @enum IxTimeSyncAcc1588PTPPortMode
- *
- * @brief Master or Slave mode for IEEE 1588 PTP Communication Port
- */
-typedef enum  /**< IxTimeSyncAcc1588PTPPortMode */
-{
-    IX_TIMESYNCACC_1588PTP_PORT_MASTER,       /**< PTP Communication Port in Master Mode */
-    IX_TIMESYNCACC_1588PTP_PORT_SLAVE,        /**< PTP Communication Port in Slave Mode */
-    IX_TIMESYNCACC_1588PTP_PORT_ANYMODE,      /**< PTP Communication Port in ANY Mode
-                                                  allows time stamping of all messages
-                                                  including non-1588 PTP */
-    IX_TIMESYNCACC_1588PTP_PORT_MODE_INVALID  /**< Invalid PTP Port Mode */
-}IxTimeSyncAcc1588PTPPortMode;
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @enum IxTimeSyncAcc1588PTPMsgType
- *
- * @brief 1588 PTP Messages types that can be detected on communication port
- *
- * Note that client code can determine this based on master/slave mode in which
- * it is already operating in and this information is made available for the sake
- * of convenience only.
- */
-typedef enum  /**< IxTimeSyncAcc1588PTPMsgType */
-{
-    IX_TIMESYNCACC_1588PTP_MSGTYPE_SYNC,     /**< PTP Sync message sent by Master or received by Slave */
-    IX_TIMESYNCACC_1588PTP_MSGTYPE_DELAYREQ, /**< PTP Delay_Req message sent by Slave or received by Master */
-    IX_TIMESYNCACC_1588PTP_MSGTYPE_UNKNOWN   /**< Other PTP and non-PTP message sent or received by both
-                                                Master and/or Slave */
-} IxTimeSyncAcc1588PTPMsgType;
-
-/**
- * Section for struct
- */
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @struct IxTimeSyncAccTimeValue
- *
- * @brief Struct to hold 64 bit SystemTime and TimeStamp values
- */
-typedef struct  /**< IxTimeSyncAccTimeValue */
-{
-    UINT32 timeValueLowWord;               /**< Lower 32 bits of the time value */
-    UINT32 timeValueHighWord;              /**< Upper 32 bits of the time value */  
-} IxTimeSyncAccTimeValue;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @struct IxTimeSyncAccUuid
- *
- * @brief Struct to hold 48 bit UUID values captured in Sync or Delay_Req messages
- */
-typedef struct  /**< IxTimeSyncAccUuid */
-{
-    UINT32 uuidValueLowWord;               /**<The lower 32 bits of the UUID */
-    UINT16 uuidValueHighHalfword;          /**<The upper 16 bits of the UUID */  
-} IxTimeSyncAccUuid;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @struct IxTimeSyncAccPtpMsgData
- *
- * @brief Struct for data from the PTP message returned when TimeStamp available
- */
-typedef struct  /**< IxTimeSyncAccPtpMsgData */
-{
-    IxTimeSyncAcc1588PTPMsgType ptpMsgType; /**< PTP Messages type */
-    IxTimeSyncAccTimeValue ptpTimeStamp;    /**< 64 bit TimeStamp value from PTP Message */
-    IxTimeSyncAccUuid ptpUuid;              /**< 48 bit UUID value from the PTP Message */
-    UINT16 ptpSequenceNumber;               /**< 16 bit Sequence Number from PTP Message */
-} IxTimeSyncAccPtpMsgData;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @struct IxTimeSyncAccStats
- *
- * @brief Statistics for the PTP messages
- */
-typedef struct  /**< IxTimeSyncAccStats */
-{
-    UINT32 rxMsgs; /**< Count of timestamps for received PTP Messages */
-    UINT32 txMsgs; /**< Count of timestamps for transmitted PTP Messages */
-} IxTimeSyncAccStats;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @typedef IxTimeSyncAccTargetTimeCallback
- *
- * @brief Callback for use by target time stamp interrupt
- */
-typedef void (*IxTimeSyncAccTargetTimeCallback)(IxTimeSyncAccTimeValue targetTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @typedef IxTimeSyncAccAuxTimeCallback
- *
- * @brief Callback for use by auxiliary time interrupts
- */
-typedef void (*IxTimeSyncAccAuxTimeCallback)(IxTimeSyncAccAuxMode auxMode,
-             IxTimeSyncAccTimeValue auxTime);
-
-/*
- * Section for prototypes interface functions
- */
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPPortConfigSet(
-                               IxTimeSyncAcc1588PTPPort ptpPort,
-                               IxTimeSyncAcc1588PTPPortMode ptpPortMode)
- *
- * @brief Configures the IEEE 1588 message detect on particular PTP port.
- *
- * @param ptpPort [in] - PTP port to config
- * @param ptpPortMode [in]- Port to operate in Master or Slave mode
- *
- * This API will enable the time stamping on a particular PTP port.
- *          
- * @li Re-entrant   : No
- * @li ISR Callable : No
- * 
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccPTPPortConfigSet(IxTimeSyncAcc1588PTPPort ptpPort,
-       IxTimeSyncAcc1588PTPPortMode ptpPortMode);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPPortConfigGet(
-                               IxTimeSyncAcc1588PTPPort ptpPort,
-                               IxTimeSyncAcc1588PTPPortMode *ptpPortMode)
- *
- * @brief Retrieves IEEE 1588 PTP operation mode on particular PTP port.
- *
- * @param ptpPort [in] - PTP port
- * @param ptpPortMode [in]- Mode of operation of PTP port (Master or Slave)
- *
- * This API will identify the time stamping capability of a PTP port by means
- * of obtaining its mode of operation.
- *          
- * @li Re-entrant   : No
- * @li ISR Callable : No
- * 
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccPTPPortConfigGet(IxTimeSyncAcc1588PTPPort ptpPort,
-    IxTimeSyncAcc1588PTPPortMode *ptpPortMode);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPRxPoll(
-                               IxTimeSyncAcc1588PTPPort ptpPort,
-                               IxTimeSyncAccPtpMsgData  *ptpMsgData)
- *
- * @brief Polls the IEEE 1588 message/time stamp detect status on a particular 
- * PTP Port on the Receive side.
- *
- * @param ptpPort [in] - PTP port to poll
- * @param ptpMsgData [out] - Current TimeStamp and other Data
- *
- * This API will poll for the availability of a time stamp on the received Sync 
- * (Slave) or Delay_Req (Master) messages.
- * The client application will provide the buffer.
- *              
- * @li Re-entrant   : No
- * @li ISR Callable : No
- * 
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_NOTIMESTAMP - No time stamp available
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccPTPRxPoll(IxTimeSyncAcc1588PTPPort ptpPort,
-    IxTimeSyncAccPtpMsgData  *ptpMsgData);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPTxPoll(
-                               IxTimeSyncAcc1588PTPPort ptpPort,
-                               IxTimeSyncAccPtpMsgData  *ptpMsgData)
- *
- *
- * @brief Polls the IEEE 1588 message/time stamp detect status on a particular 
- * PTP Port on the Transmit side.
- *
- * @param ptpPort [in] - PTP port to poll
- * @param ptpMsgData [out] - Current TimeStamp and other Data
- *                        
- * This API will poll for the availability of a time stamp on the transmitted
- * Sync (Master) or Delay_Req (Slave) messages.
- * The client application will provide the buffer.
- *              
- * @li Re-entrant   : No
- * @li ISR Callable : No
- * 
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_NOTIMESTAMP - No time stamp available
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccPTPTxPoll(IxTimeSyncAcc1588PTPPort ptpPort,
-    IxTimeSyncAccPtpMsgData  *ptpMsgData);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccSystemTimeSet(
-                               IxTimeSyncAccTimeValue systemTime)
- *
- * @brief Sets the System Time in the IEEE 1588 hardware assist block
- *
- * @param systemTime [in] - Value to set System Time
- *                        
- * This API will set the SystemTime to given value.
- *              
- * @li Re-entrant   : yes
- * @li ISR Callable : no
- * 
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccSystemTimeSet(IxTimeSyncAccTimeValue systemTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccSystemTimeGet(
-                               IxTimeSyncAccTimeValue *systemTime)
- *
- * @brief Gets the System Time from the IEEE 1588 hardware assist block
- *
- * @param systemTime [out] - Copy the current System Time into the client 
- * application provided buffer
- *
- * This API will get the SystemTime from IEEE1588 block and return to client
- *      
- * @li Re-entrant   : no
- * @li ISR Callable : no
- * 
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccSystemTimeGet(IxTimeSyncAccTimeValue *systemTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTickRateSet(
-                               UINT32 tickRate)
- *
- * @brief Sets the Tick Rate (Frequency Scaling Value) in the IEEE 1588
- * hardware assist block
- *
- * @param tickRate [in] - Value to set Tick Rate
- *                        
- * This API will set the Tick Rate (Frequency Scaling Value) in the IEEE
- * 1588 block to the given value. The Accumulator register (not client 
- * visible) is incremented by this TickRate value every clock cycle. When 
- * the Accumulator overflows, the SystemTime is incremented by one. This
- * TickValue can therefore be used to adjust the system timer.
- *           
- * @li Re-entrant   : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTickRateSet(UINT32 tickRate);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTickRateGet(
-                               UINT32 *tickRate)
- *
- * @brief Gets the Tick Rate (Frequency Scaling Value) from the IEEE 1588
- * hardware assist block
- *
- * @param tickRate [out] - Current Tick Rate value in the IEEE 1588 block
- *
- * This API will get the TickRate on IEE15588 block. Refer to @ref 
- * ixTimeSyncAccTickRateSet for notes on usage of this value.
- *         
- * @li   Reentrant    : yes
- * @li   ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTickRateGet(UINT32 *tickRate);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeInterruptEnable(
-                               IxTimeSyncAccTargetTimeCallback targetTimeCallback)
- *
- * @brief Enables the interrupt to verify the condition where the System Time 
- * greater or equal to the Target Time in the IEEE 1588 hardware assist block. 
- * If the condition is true an interrupt will be sent to XScale.
- *
- * @param targetTimeCallback [in] - Callback to be invoked when interrupt fires
- *
- * This API will enable the Target Time reached/hit condition interrupt.
- *
- * NOTE: The client application needs to ensure that the APIs 
- * @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and
- * @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive 
- * manner with respect to each other.
- *
- * @li Re-entrant   : no
- * @li ISR Callable : yes
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for callback
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimeInterruptEnable(IxTimeSyncAccTargetTimeCallback targetTimeCallback);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeInterruptDisable(
-                               void)
- *
- * @brief Disables the interrupt for the condition explained in the function
- * description of @ref ixTimeSyncAccTargetTimeInterruptEnable.
- *
- * This API will disable the Target Time interrupt.
- *
- * NOTE: The client application needs to ensure that the APIs 
- * @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and
- * @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive 
- * manner with respect to each other.
- *              
- * @li Re-entrant   : no
- * @li ISR Callable : yes
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimeInterruptDisable(void);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimePoll(
-                               BOOL *ttmPollFlag,
-                               IxTimeSyncAccTimeValue *targetTime)
- *
- * @brief Poll to verify the condition where the System Time greater or equal to
- * the Target Time in the IEEE 1588 hardware assist block. If the condition is
- * true an event flag is set in the hardware.
- *
- * @param ttmPollFlag [out] - TRUE  if the target time reached/hit condition event set
- *                            FALSE if the target time reached/hit condition event is 
-                                    not set
- * @param targetTime [out] - Capture current targetTime into client provided buffer
- *
- * Poll the target time reached/hit condition status. Return true and the current
- * target time value, if the condition is true else return false.
- *
- * NOTE: The client application will need to clear the event flag that will be set
- * as long as the condition that the System Time greater or equal to the Target Time is
- * valid, in one of the following ways:
- *     1) Invoke the API to change the target time
- *     2) Change the system timer value 
- *              
- * @li Re-entrant   : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- *         @li IX_TIMESYNCACC_INTERRUPTMODEINUSE - Interrupt mode in use
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimePoll(BOOL *ttmPollFlag,
-    IxTimeSyncAccTimeValue *targetTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeSet(
-                               IxTimeSyncAccTimeValue targetTime)
- *
- * @brief Sets the Target Time in the IEEE 1588 hardware assist block
- *
- * @param targetTime [in] - Value to set Target Time
- *                        
- * This API will set the Target Time to a given value.
- *
- * NOTE: The client application needs to ensure that the APIs 
- * @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and
- * @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive 
- * manner with respect to each other.
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : yes
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimeSet(IxTimeSyncAccTimeValue targetTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeGet(
-                               IxTimeSyncAccTimeValue *targetTime)
- *
- * @brief Gets the Target Time in the IEEE 1588 hardware assist block
- *
- * @param targetTime [out] - Copy current time to client provided buffer
- *                                                 
- * This API will get the Target Time from IEEE 1588 block and return to the 
- * client application
- *            
- * @li Re-entrant   : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimeGet(IxTimeSyncAccTimeValue *targetTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimeInterruptEnable(
-                               IxTimeSyncAccAuxMode auxMode, 
-                               IxTimeSyncAccAuxTimeCallback auxTimeCallback)
- *
- * @brief Enables the interrupt notification for the given mode of Auxiliary Time 
- * Stamp in the IEEE 1588 hardware assist block
- * 
- * @param auxMode [in] - Auxiliary time stamp register (slave or master) to use
- * @param auxTimeCallback [in] - Callback to be invoked when interrupt fires 
- *                                                              
- * This API will enable the Auxiliary Master/Slave Time stamp Interrupt.
- *
- * <pre>
- * NOTE: 1) An individual callback is to be registered for each Slave and Master 
- * Auxiliary Time Stamp registers. Thus to register for both Master and Slave time
- * stamp interrupts either the same callback or two separate callbacks the API has
- * to be invoked twice.
- *       2) On the IXDP465 Development Platform, the Auxiliary Timestamp signal for 
- * slave mode is tied to GPIO 8 pin. This signal is software routed by default to 
- * PCI for backwards compatibility with the IXDP425 Development Platform. This
- * routing must be disabled for the auxiliary slave time stamp register to work 
- * properly. The following commands may be used to accomplish this. However, refer
- * to the IXDP465 Development Platform Users Guide or the BSP/LSP documentation for
- * more specific information.
- *
- * For Linux (at the Redboot prompt i.e., before loading zImage):
- *     mfill -b 0x54100000 -1 -l 1 -p 8
- *     mfill -b 0x54100001 -1 -l 1 -p 0x7f
- * For vxWorks, at the prompt:
- *     intDisable(25)
- *     ixdp400FpgaIODetach(8)
- * </pre>
- *              
- * @li Re-entrant   : no
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for callback or
-                                            invalid auxiliary snapshot mode
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccAuxTimeInterruptEnable(IxTimeSyncAccAuxMode auxMode,
-    IxTimeSyncAccAuxTimeCallback auxTimeCallback);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimeInterruptDisable(
-                               IxTimeSyncAccAuxMode auxMode)
- *
- * @brief Disables the interrupt for the indicated mode of Auxiliary Time Stamp
- * in the IEEE 1588 hardware assist block
- *
- * @param auxMode [in] - Auxiliary time stamp mode (slave or master) using which
- * the interrupt will be disabled.
- *                        
- * This API will disable the Auxiliary Time Stamp Interrupt (Master or Slave)
- *              
- * @li Re-entrant   : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccAuxTimeInterruptDisable(IxTimeSyncAccAuxMode auxMode);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimePoll(
-                               IxTimeSyncAccAuxMode auxMode,
-                               BOOL *auxPollFlag,
-                               IxTimeSyncAccTimeValue *auxTime)
- *
- * @brief Poll for the Auxiliary Time Stamp captured for the mode indicated 
- * (Master or Slave)
- *
- * @param auxMode [in] - Auxiliary Snapshot Register (Slave or Master) to be checked
- * @param auxPollFlag [out] - TRUE if the time stamp captured in auxiliary 
-                                   snapshot register
- *                            FALSE if the time stamp not captured in 
-                                   auxiliary snapshot register
- * @param auxTime [out] - Copy the current Auxiliary Snapshot Register value into the
- * client provided buffer
- *
- * Polls for the Time stamp in the appropriate Auxiliary Snapshot Registers based 
- * on the mode specified. Return true and the contents of the Auxiliary snapshot,
- * if it is available else return false.
- * 
- * Please refer to the note #2 of the API @ref ixTimeSyncAccAuxTimeInterruptEnable
- * for more information for Auxiliary Slave mode.
- *
- * @li Re-entrant   : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for auxPollFlag,
-                   callback or invalid auxiliary snapshot mode
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- *         @li IX_TIMESYNCACC_INTERRUPTMODEINUSE - Interrupt mode in use
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccAuxTimePoll(IxTimeSyncAccAuxMode auxMode,
-    BOOL *auxPollFlag,
-    IxTimeSyncAccTimeValue *auxTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccReset(void)
- *
- * @brief Resets the IEEE 1588 hardware assist block
- *
- * Sets the reset bit in the IEEE1588 silicon which fully resets the silicon block
- *            
- * @li Reentrant    : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_FAILED  - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccReset(void);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccStatsGet(IxTimeSyncAccStats
-                               *timeSyncStats)
- *
- * @brief Returns the IxTimeSyncAcc Statistics in the client supplied buffer
- *
- * @param timeSyncStats [out] - TimeSync statistics counter values
- *
- * This API will return the statistics of the received or transmitted messages.
- * 
- * NOTE: 1) These counters are updated only when the client polls for the time 
- * stamps or interrupt are enabled. This is because the IxTimeSyncAcc module 
- * does not either transmit or receive messages and does only run the code 
- * when explicit requests received by client application.
- *
- *       2) These statistics reflect the number of valid PTP messages exchanged
- * in Master and Slave modes but includes all the messages (including valid 
- * non-PTP messages) while operating in the Any mode.
- *              
- * @li Reentrant    : no
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - NULL parameter passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccStatsGet(IxTimeSyncAccStats *timeSyncStats);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn void ixTimeSyncAccStatsReset(void)
- *
- * @brief Reset Time Sync statistics
- *
- * This API will reset the statistics counters of the TimeSync access layer.
- *             
- * @li Reentrant    : yes
- * @li ISR Callable:  no
- *
- * @return @li None
- */
-PUBLIC void
-ixTimeSyncAccStatsReset(void);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccShow(void)
- *
- * @brief Displays the Time Sync current status
- *
- * This API will display status on the current configuration of the IEEE
- * 1588 hardware assist block, contents of the various time stamp registers,
- * outstanding interrupts and/or events.
- *
- * Note that this is intended for debug only, and in contrast to the other
- * functions, it does not clear the any of the status bits associated with
- * active timestamps and so is passive in its nature.
- *            
- * @li Reentrant    : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccShow(void);
-
-#endif /* __ixp46X */
-#endif /* IXTIMESYNCACC_H */
-
-/**
- * @} defgroup IxTimeSyncAcc
- */
-