* Update Intel IXP4xx support

- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006

[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
 sufferes from licensing issues. Blame Intel.]

1 files changed, 504 insertions, 0 deletions

diff --git a/cpu/ixp/npe/include/IxAtmSch.h b/cpu/ixp/npe/include/IxAtmSch.h
new file mode 100644
index 0000000..73c3be2
--- /dev/null
+++ b/cpu/ixp/npe/include/IxAtmSch.h
@@ -0,0 +1,504 @@
+/**
+ * @file    IxAtmSch.h
+ *
+ * @date    23-NOV-2001
+ *
+ * @brief   Header file for the IXP400 ATM Traffic Shaper
+ *
+ * This component demonstrates an ATM Traffic Shaper implementation. It
+ * will perform shaping on upto 12 ports and total of 44 VCs accross all ports,
+ * 32 are intended for AAL0/5 and 12 for OAM (1 per port).
+ * The supported traffic types are;1 rt-VBR VC where PCR = SCR.
+ * (Effectively CBR) and Up-to 44 VBR VCs.
+ *
+ * This component models the ATM ports and VCs and is capable of producing
+ * a schedule of ATM cells per port which can be supplied to IxAtmdAcc
+ * for execution on the data path.
+ * 
+ * @par
+ * IXP400 SW Release version 2.0
+ * 
+ * -- Copyright Notice --
+ * 
+ * @par
+ * Copyright 2001-2005, Intel Corporation.
+ * All rights reserved.
+ * 
+ * @par
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Intel Corporation nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * 
+ * @par
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * @par
+ * -- End of Copyright Notice --
+ *
+ * @sa IxAtmm.h
+ *
+ */
+
+/**
+ * @defgroup IxAtmSch IXP400 ATM Transmit Scheduler (IxAtmSch) API
+ *
+ * @brief IXP400 ATM scheduler component Public API
+ *
+ * @{
+ */
+
+#ifndef IXATMSCH_H
+#define IXATMSCH_H
+
+#include "IxOsalTypes.h"
+#include "IxAtmTypes.h"
+
+/*
+ * #defines and macros used in this file.
+ */
+
+/* Return codes */
+
+/** 
+ * @ingroup IxAtmSch
+ *
+ * @def IX_ATMSCH_RET_NOT_ADMITTED
+ * @brief Indicates that CAC function has rejected VC registration due
+ *         to insufficient line capacity.
+*/
+#define IX_ATMSCH_RET_NOT_ADMITTED 2
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ * @def IX_ATMSCH_RET_QUEUE_FULL
+ *  @brief Indicates that the VC queue is full, no more demand can be
+ *         queued at this time.
+ */
+#define IX_ATMSCH_RET_QUEUE_FULL 3
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ *  @def IX_ATMSCH_RET_QUEUE_EMPTY
+ *  @brief Indicates that all VC queues on this port are empty and
+ *         therefore there are no cells to be scheduled at this time.
+ */
+#define IX_ATMSCH_RET_QUEUE_EMPTY 4
+
+/*
+ * Function declarations
+ */
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ * @fn ixAtmSchInit(void)
+ *
+ *  @brief This function is used to initialize the ixAtmSch component. It
+ *         should be called before any other IxAtmSch API function.
+ *
+ * @param None
+ *
+ * @return
+ * - <b>IX_SUCCESS :</b> indicates that
+ *          -# The ATM scheduler component has been successfully initialized.
+ *          -# The scheduler is ready to accept Port modelling requests.
+ * - <b>IX_FAIL :</b> Some internal error has prevented the scheduler component
+ *          from initialising.
+ */
+PUBLIC IX_STATUS
+ixAtmSchInit(void);
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ * @fn ixAtmSchPortModelInitialize( IxAtmLogicalPort port,
+                                       unsigned int portRate,
+                                       unsigned int minCellsToSchedule)
+ *
+ * @brief This function shall be called first to initialize an ATM port before
+ *         any other ixAtmSch API calls may be made for that port.
+ *
+ * @param port @ref IxAtmLogicalPort [in] - The specific port to initialize.  Valid
+ *          values range from 0 to IX_UTOPIA_MAX_PORTS - 1, representing a 
+ *          maximum of IX_UTOPIA_MAX_PORTS possible ports.
+ *
+ * @param portRate unsigned int [in] - Value indicating the upstream capacity
+ *          of the indicated port.  The value should be supplied in
+ *          units of ATM (53 bytes) cells per second.
+ *          A port rate of 800Kbits/s is the equivalent 
+ *          of 1886 cells per second
+ *
+ * @param minCellsToSchedule unsigned int [in] - This parameter specifies the minimum
+ *          number of cells which the scheduler will put in a schedule
+ *          table for this port. This value sets the worst case CDVT for VCs
+ *          on this port i.e. CDVT = 1*minCellsToSchedule/portRate.
+ * @return
+ *    - <b>IX_SUCCESS :</b> indicates that
+ *          -# The ATM scheduler has been successfully initialized.
+ *          -# The requested port model has been established.
+ *          -# The scheduler is ready to accept VC modelling requests
+ *            on the ATM port.
+ *    - <b>IX_FAIL :</b> indicates the requested port could not be
+ * initialized.  */
+PUBLIC IX_STATUS
+ixAtmSchPortModelInitialize( IxAtmLogicalPort port,
+                                       unsigned int portRate,
+                                       unsigned int minCellsToSchedule);
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ * @fn ixAtmSchPortRateModify( IxAtmLogicalPort port,
+                        unsigned int portRate)
+ *
+ *  @brief This function is called to modify the portRate on a
+ *         previously initialized port, typically in the event that
+ *         the line condition of the port changes.
+ *
+ * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port which is to be
+ *          modified.
+ *
+ * @param portRate unsigned int [in] - Value indicating the new upstream
+ *          capacity for this port in cells/second.
+ *          A port rate of 800Kbits/s is the equivalent 
+ *          of 1886 cells per second
+ *
+ * @return
+ * - <b>IX_SUCCESS :</b> The port rate has been successfully modified.<br>
+ * - <b>IX_FAIL :</b> The port rate could not be modified, either
+ *      because the input data was invalid, or the new port rate is
+ *      insufficient to support established ATM VC contracts on this
+ *      port.
+ *
+ * @warning The IxAtmSch component will validate the supplied port
+ *          rate is sufficient to support all established VC
+ *          contracts on the port.  If the new port rate is
+ *          insufficient to support all established contracts then
+ *          the request to modify the port rate will be rejected.
+ *          In this event, the user is expected to remove
+ *          established contracts using the ixAtmSchVcModelRemove
+ *          interface and then retry this interface.
+ *
+ * @sa ixAtmSchVcModelRemove() */
+PUBLIC IX_STATUS
+ixAtmSchPortRateModify( IxAtmLogicalPort port,
+                        unsigned int portRate);
+
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ * @fn ixAtmSchVcModelSetup( IxAtmLogicalPort port,
+                      IxAtmTrafficDescriptor *trafficDesc,
+                      IxAtmSchedulerVcId *vcId)
+ *
+ *  @brief A client calls this interface to set up an upstream
+ *         (transmitting) virtual connection model (VC) on the
+ *         specified ATM port.  This function also provides the
+ *         virtual * connection admission control (CAC) service to the
+ *         client.
+ *
+ * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the upstream
+ *          VC is to be established.
+ *
+ * @param *trafficDesc @ref IxAtmTrafficDescriptor [in] - Pointer to a structure
+ *          describing the requested traffic contract of the VC to be
+ *          established.  This structure contains the typical ATM
+ *          traffic descriptor values (e.g. PCR, SCR, MBS, CDVT, etc.)
+ *          defined by the ATM standard.
+ *
+ * @param *vcId @ref IxAtmSchedulerVcId [out] - This value will be filled with the
+ *              port-unique identifier for this virtual connection.  A
+ *              valid identification is a non-negative number.
+ *
+ * @return
+ * - <b>IX_SUCCESS :</b> The VC has been successfully established on
+ *      this port.  The client may begin to submit demand on this VC.
+ * - <b>IX_ATMSCH_RET_NOT_ADMITTED :</b> The VC cannot be established
+ *      on this port because there is insufficient upstream capacity
+ *      available to support the requested traffic contract descriptor
+ * - <b>IX_FAIL :</b>Input data are invalid.  VC has not been
+ *      established.
+ */
+PUBLIC IX_STATUS
+ixAtmSchVcModelSetup( IxAtmLogicalPort port,
+                      IxAtmTrafficDescriptor *trafficDesc,
+                      IxAtmSchedulerVcId *vcId);
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ * @fn ixAtmSchVcConnIdSet( IxAtmLogicalPort port,
+                     IxAtmSchedulerVcId vcId,
+                     IxAtmConnId vcUserConnId)
+ *
+ *  @brief A client calls this interface to set the vcUserConnId for a VC on
+ *         the specified ATM port. This vcUserConnId will default to
+ *         IX_ATM_IDLE_CELLS_CONNID if this function is not called for a VC.
+ *         Hence if the client does not call this function for a VC then only idle
+ *         cells will be scheduled for this VC.
+ *
+ * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the upstream
+ *        VC is has been established.
+ *
+ * @param vcId @ref IxAtmSchedulerVcId [in] - This is the unique identifier for this virtual
+ *        connection. A valid identification is a non-negative number and is
+ *        all ports.
+ *
+ * @param vcUserConnId @ref IxAtmConnId [in] - The connId is used to refer to a VC in schedule
+ *        table entries. It is treated as the Id by which the scheduler client
+ *        knows the VC. It is used in any communicatations from the Scheduler
+ *        to the scheduler user e.g. schedule table entries.
+ *
+ * @return
+ * - <b>IX_SUCCESS :</b> The id has successfully been set.
+ * - <b>IX_FAIL :</b>Input data are invalid. connId id is not established.
+ */
+PUBLIC IX_STATUS
+ixAtmSchVcConnIdSet( IxAtmLogicalPort port,
+                     IxAtmSchedulerVcId vcId,
+                     IxAtmConnId vcUserConnId);
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ * @fn ixAtmSchVcModelRemove( IxAtmLogicalPort port,
+                       IxAtmSchedulerVcId vcId)
+ *
+ *  @brief Interface called by the client to remove a previously
+ *         established VC on a particular port.
+ *
+ * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be
+ *          removed is established.
+ *
+ * @param vcId @ref IxAtmSchedulerVcId [in] - Identifies the VC to be removed.  This is the
+ *          value returned by the @ref ixAtmSchVcModelSetup call which
+ *          established the relevant VC.
+ *
+ * @return
+ * - <b>IX_SUCCESS :</b> The VC has been successfully removed from
+ *      this port. It is no longer modelled on this port.
+ * - <b>IX_FAIL :</b>Input data are invalid. The VC is still being modeled
+ *      by the traffic shaper.
+ *
+ * @sa ixAtmSchVcModelSetup() 
+ */
+PUBLIC IX_STATUS
+ixAtmSchVcModelRemove( IxAtmLogicalPort port,
+                       IxAtmSchedulerVcId vcId);
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ * @fn ixAtmSchVcQueueUpdate( IxAtmLogicalPort port,
+                       IxAtmSchedulerVcId vcId,
+                       unsigned int numberOfCells)
+ *
+ *  @brief The client calls this function to notify IxAtmSch that the
+ *         user of a VC has submitted cells for transmission.
+ *
+ *  This information is stored, aggregated from a number of calls to
+ *  ixAtmSchVcQueueUpdate and eventually used in the call to
+ *  ixAtmSchTableUpdate.
+ *
+ *  Normally IxAtmSch will update the VC queue by adding the number of
+ *  cells to the current queue length.  However, if IxAtmSch
+ *  determines that the user has over-submitted for the VC and
+ *  exceeded its transmission quota the queue request can be rejected.
+ *  The user should resubmit the request later when the queue has been
+ *  depleted.
+ *
+ *  This implementation of ixAtmSchVcQueueUpdate uses no operating
+ *  system or external facilities, either directly or indirectly.
+ *  This allows clients to call this function form within an interrupt handler.
+ *
+ *  This interface is structurally compatible with the
+ *  IxAtmdAccSchQueueUpdate callback type definition required for
+ *  IXP400 ATM scheduler interoperability.
+ *
+ * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be
+ *          updated is established.
+ *
+ * @param vcId @ref IxAtmSchedulerVcId [in] - Identifies the VC to be updated.  This is the
+ *          value returned by the @ref ixAtmSchVcModelSetup call which
+ *          established the relevant VC.
+ *
+ * @param numberOfCells unsigned int [in] - Indicates how many ATM cells should
+ *          be added to the queue for this VC.
+ *
+ * @return
+ *  - <b>IX_SUCCESS :</b> The VC queue has been successfully updated.
+ *  - <b>IX_ATMSCH_RET_QUEUE_FULL :</b> The VC queue has reached a
+ *       preset limit.  This indicates the client has over-submitted
+ *       and exceeded its transmission quota.  The request is
+ *       rejected.  The VC queue is not updated.  The VC user is
+ *       advised to resubmit the request later.
+ *  - <b>IX_FAIL :</b> The input are invalid.  No VC queue is updated.
+ *
+ * @warning IxAtmSch assumes that the calling software ensures that
+ *          calls to ixAtmSchVcQueueUpdate, ixAtmSchVcQueueClear and
+ *          ixAtmSchTableUpdate are both self and mutually exclusive
+ *          for the same port.
+ *
+ * @sa ixAtmSchVcQueueUpdate(), ixAtmSchVcQueueClear(), ixAtmSchTableUpdate().  */
+PUBLIC IX_STATUS
+ixAtmSchVcQueueUpdate( IxAtmLogicalPort port,
+                       IxAtmSchedulerVcId vcId,
+                       unsigned int numberOfCells);
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ * @fn ixAtmSchVcQueueClear( IxAtmLogicalPort port,
+                      IxAtmSchedulerVcId vcId)
+ *
+ *  @brief The client calls this function to remove all currently
+ *         queued cells from a registered VC.  The pending cell count
+ *         for the specified VC is reset to zero.
+ *
+ *  This interface is structurally compatible with the
+ *  IxAtmdAccSchQueueClear callback type definition required for
+ *  IXP400 ATM scheduler interoperability.
+ *
+ * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be
+ *          cleared is established.
+ *
+ * @param vcId @ref IxAtmSchedulerVcId [in] - Identifies the VC to be cleared.  This is the
+ *          value returned by the @ref ixAtmSchVcModelSetup call which
+ *          established the relevant VC.
+ *
+ * @return
+ *  - <b>IX_SUCCESS :</b> The VC queue has been successfully cleared.
+ *  - <b>IX_FAIL :</b> The input are invalid.  No VC queue is modified.
+ *
+ * @warning IxAtmSch assumes that the calling software ensures that
+ *          calls to ixAtmSchVcQueueUpdate, ixAtmSchVcQueueClear and
+ *          ixAtmSchTableUpdate are both self and mutually exclusive
+ *          for the same port.
+ *
+ * @sa ixAtmSchVcQueueUpdate(), ixAtmSchVcQueueClear(), ixAtmSchTableUpdate().  */
+PUBLIC IX_STATUS
+ixAtmSchVcQueueClear( IxAtmLogicalPort port,
+                      IxAtmSchedulerVcId vcId);
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ * @fn ixAtmSchTableUpdate( IxAtmLogicalPort port,
+                     unsigned int maxCells,
+                     IxAtmScheduleTable **rettable)
+ *
+ *  @brief The client calls this function to request an update of the
+ *         schedule table for a particular ATM port.
+ *
+ *  This is called when the client decides it needs a new sequence of
+ *  cells to send (probably because the transmit queue is near to
+ *  empty for this ATM port).  The scheduler will use its stored
+ *  information on the cells submitted for transmit (i.e. data
+ *  supplied via @ref ixAtmSchVcQueueUpdate function) with the traffic
+ *  descriptor information of all established VCs on the ATM port to
+ *  decide the sequence of cells to be sent and fill the schedule
+ *  table for a period of time into the future.
+ *
+ *  IxAtmSch will guarantee a minimum of minCellsToSchedule if there
+ *  is at least one cell ready to send. If there are no cells then
+ *  IX_ATMSCH_RET_QUEUE_EMPTY is returned.
+ *
+ *  This implementation of ixAtmSchTableUpdate uses no operating
+ *  system or external facilities, either directly or indirectly.
+ *  This allows clients to call this function form within an FIQ
+ *  interrupt handler.
+ *
+ * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port for which requested
+ *          schedule table is to be generated.
+ *
+ * @param maxCells unsigned [in] - Specifies the maximum number of cells
+ *          that must be scheduled in the supplied table during any
+ *          call to the interface.
+ *
+ * @param **table @ref IxAtmScheduleTable [out] - A pointer to an area of
+ *              storage is returned which contains the generated
+ *              schedule table.  The client should not modify the
+ *              contents of this table.
+ *
+ * @return
+ *  - <b>IX_SUCCESS :</b> The schedule table has been published.
+ *       Currently there is at least one VC queue that is nonempty.
+ *  - <b>IX_ATMSCH_RET_QUEUE_EMPTY :</b> Currently all VC queues on
+ *       this port are empty.  The schedule table returned is set to
+ *       NULL.  The client is not expected to invoke this function
+ *       again until more cells have been submitted on this port
+ *       through the @ref ixAtmSchVcQueueUpdate function.
+ *  - <b>IX_FAIL :</b> The input are invalid.  No action is taken.
+ *
+ * @warning IxAtmSch assumes that the calling software ensures that
+ *          calls to ixAtmSchVcQueueUpdate, ixAtmSchVcQueueClear and
+ *          ixAtmSchTableUpdate are both self and mutually exclusive
+ *          for the same port.
+ *
+ * @warning Subsequent calls to this function for the same port will
+ *          overwrite the contents of previously supplied schedule
+ *          tables.  The client must be completely finished with the
+ *          previously supplied schedule table before calling this
+ *          function again for the same port.
+ *
+ * @sa ixAtmSchVcQueueUpdate(), ixAtmSchVcQueueClear(), ixAtmSchTableUpdate().  */
+PUBLIC IX_STATUS
+ixAtmSchTableUpdate( IxAtmLogicalPort port,
+                     unsigned int maxCells,
+                     IxAtmScheduleTable **rettable);
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ * @fn ixAtmSchShow(void)
+ *
+ *  @brief Utility function which will print statistics on the current
+ *         and accumulated state of VCs and traffic in the ATM
+ *         scheduler component.  Output is sent to the default output
+ *         device.
+ *
+ * @param none
+ * @return none
+ */
+PUBLIC void
+ixAtmSchShow(void);
+
+/**  
+ * @ingroup IxAtmSch
+ *
+ * @fn ixAtmSchStatsClear(void)
+ *
+ *  @brief Utility function which will reset all counter statistics in
+ *         the ATM scheduler to zero.
+ *
+ * @param none
+ * @return none
+ */
+PUBLIC void
+ixAtmSchStatsClear(void);
+
+#endif
+/* IXATMSCH_H */
+
+/** @} */