arm: Move cpu/$CPU to arch/arm/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 0 insertions, 608 deletions

diff --git a/cpu/ixp/npe/IxNpeMhConfig.c b/cpu/ixp/npe/IxNpeMhConfig.c
deleted file mode 100644
index 50c8f21..0000000
--- a/cpu/ixp/npe/IxNpeMhConfig.c
+++ /dev/null
@@ -1,608 +0,0 @@
-/**
- * @file IxNpeMhConfig.c
- *
- * @author Intel Corporation
- * @date 18 Jan 2002
- *
- * @brief This file contains the implementation of the private API for the
- * Configuration module.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Intel Corporation nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * @par
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * @par
- * -- End of Copyright Notice --
-*/
-
-/*
- * Put the system defined include files required.
- */
-
-
-/*
- * Put the user defined include files required.
- */
-
-#include "IxOsal.h"
-
-#include "IxNpeMhMacros_p.h"
-
-#include "IxNpeMhConfig_p.h"
-
-/*
- * #defines and macros used in this file.
- */
-#define IX_NPE_MH_MAX_NUM_OF_RETRIES 1000000 /**< Maximum number of
-                                              * retries before
-                                              * timeout
-					                          */  
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/**
- * @struct IxNpeMhConfigStats
- *
- * @brief This structure is used to maintain statistics for the
- * Configuration module.
- */
-
-typedef struct
-{
-    UINT32 outFifoReads;        /**< outFifo reads */
-    UINT32 inFifoWrites;        /**< inFifo writes */
-    UINT32 maxInFifoFullRetries;   /**< max retries if inFIFO full   */
-    UINT32 maxOutFifoEmptyRetries; /**< max retries if outFIFO empty */
-} IxNpeMhConfigStats;
-
-/*
- * Variable declarations global to this file only.  Externs are followed by
- * static variables.
- */
-
-IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES] =
-{
-    {
-        0,
-        IX_NPEMH_NPEA_INT,
-	0,
-        0,
-        0,
-        0,
-        0,
-        NULL,
-        FALSE
-    },
-    {
-        0,
-        IX_NPEMH_NPEB_INT,
-	0,
-	0,
-        0,
-        0,
-        0,
-        NULL,
-        FALSE
-    },
-    {
-        0,
-        IX_NPEMH_NPEC_INT,
-        0,
-        0,
-        0,
-        0,
-        0,
-        NULL,
-        FALSE
-    }
-};
-
-PRIVATE IxNpeMhConfigStats ixNpeMhConfigStats[IX_NPEMH_NUM_NPES];
-
-/*
- * Extern function prototypes.
- */
-
-/*
- * Static function prototypes.
- */
-PRIVATE
-void ixNpeMhConfigIsr (void *parameter);
-
-/*
- * Function definition: ixNpeMhConfigIsr
- */
-
-PRIVATE
-void ixNpeMhConfigIsr (void *parameter)
-{
-    IxNpeMhNpeId npeId = (IxNpeMhNpeId)parameter;
-    UINT32 ofint;
-    volatile UINT32 *statusReg =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhConfigIsr\n");
-
-    /* get the OFINT (OutFifo interrupt) bit of the status register */
-    IX_NPEMH_REGISTER_READ_BITS (statusReg, &ofint, IX_NPEMH_NPE_STAT_OFINT);
-
-    /* if the OFINT status bit is set */
-    if (ofint)
-    {
-        /* if there is an ISR registered for this NPE */
-        if (ixNpeMhConfigNpeInfo[npeId].isr != NULL)
-        {
-            /* invoke the ISR routine */
-            ixNpeMhConfigNpeInfo[npeId].isr (npeId);
-        }
-        else
-        {
-            /* if we don't service the interrupt the NPE will continue */
-            /* to trigger the interrupt indefinitely */
-            IX_NPEMH_ERROR_REPORT ("No ISR registered to service "
-                                   "interrupt\n");
-        }
-    }
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhConfigIsr\n");
-}
-
-/*
- * Function definition: ixNpeMhConfigInitialize
- */
-
-void ixNpeMhConfigInitialize (
-    IxNpeMhNpeInterrupts npeInterrupts)
-{
-    IxNpeMhNpeId npeId;
-    UINT32 virtualAddr[IX_NPEMH_NUM_NPES];
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhConfigInitialize\n");
-
-    /* Request a mapping for the NPE-A config register address space */
-    virtualAddr[IX_NPEMH_NPEID_NPEA] =
-	(UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEA_BASE,
-				     IX_OSAL_IXP400_NPEA_MAP_SIZE);
-    IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEA]);
-
-    /* Request a mapping for the NPE-B config register address space */
-    virtualAddr[IX_NPEMH_NPEID_NPEB] =
-	(UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEB_BASE,
-				     IX_OSAL_IXP400_NPEB_MAP_SIZE);
-    IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEB]);
-    
-    /* Request a mapping for the NPE-C config register address space */
-    virtualAddr[IX_NPEMH_NPEID_NPEC] =
-	(UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEC_BASE,
-				     IX_OSAL_IXP400_NPEC_MAP_SIZE);
-    IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEC]);
-
-    /* for each NPE ... */
-    for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++)
-    {
-        /* declare a convenience pointer */
-        IxNpeMhConfigNpeInfo *npeInfo = &ixNpeMhConfigNpeInfo[npeId];
-	
-	/* store the virtual addresses of the NPE registers for later use */
-	npeInfo->virtualRegisterBase  = virtualAddr[npeId];
-	npeInfo->statusRegister  = virtualAddr[npeId] + IX_NPEMH_NPESTAT_OFFSET;
-	npeInfo->controlRegister = virtualAddr[npeId] + IX_NPEMH_NPECTL_OFFSET;
-	npeInfo->inFifoRegister  = virtualAddr[npeId] + IX_NPEMH_NPEFIFO_OFFSET;
-	npeInfo->outFifoRegister = virtualAddr[npeId] + IX_NPEMH_NPEFIFO_OFFSET;
-
-        /* for test purposes - to verify the register addresses */
-        IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d status register  = "
-                         "0x%08X\n", npeId, npeInfo->statusRegister);
-        IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d control register = "
-                         "0x%08X\n", npeId, npeInfo->controlRegister);
-        IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d inFifo register  = "
-                         "0x%08X\n", npeId, npeInfo->inFifoRegister);
-        IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d outFifo register = "
-                         "0x%08X\n", npeId, npeInfo->outFifoRegister);
-
-        /* connect our ISR to the NPE interrupt */
-        (void) ixOsalIrqBind (
-            npeInfo->interruptId, ixNpeMhConfigIsr, (void *)npeId);
-
-        /* initialise a mutex for this NPE */
-        (void) ixOsalMutexInit (&npeInfo->mutex);
-
-        /* if we should service the NPE's "outFIFO not empty" interrupt */
-        if (npeInterrupts == IX_NPEMH_NPEINTERRUPTS_YES)
-        {
-            /* enable the NPE's "outFIFO not empty" interrupt */
-            ixNpeMhConfigNpeInterruptEnable (npeId);
-        }
-        else
-        {
-            /* disable the NPE's "outFIFO not empty" interrupt */
-            ixNpeMhConfigNpeInterruptDisable (npeId);
-        }
-    }
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhConfigInitialize\n");
-}
-
-/*
- * Function definition: ixNpeMhConfigUninit
- */
-
-void ixNpeMhConfigUninit (void)
-{
-    IxNpeMhNpeId npeId;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhConfigUninit\n");
-
-    /* for each NPE ... */
-    for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++)
-    {
-        /* declare a convenience pointer */
-        IxNpeMhConfigNpeInfo *npeInfo = &ixNpeMhConfigNpeInfo[npeId];
-        
-        /* disconnect ISR */
-        ixOsalIrqUnbind(npeInfo->interruptId);
-
-        /* destroy mutex associated with this NPE */
-        ixOsalMutexDestroy(&npeInfo->mutex);
-	
-	IX_OSAL_MEM_UNMAP (npeInfo->virtualRegisterBase);
-
-	npeInfo->virtualRegisterBase  = 0;
-	npeInfo->statusRegister  = 0;
-	npeInfo->controlRegister = 0;
-	npeInfo->inFifoRegister  = 0;
-	npeInfo->outFifoRegister = 0;
-    }
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhConfigUninit\n");
-}
-
-/*
- * Function definition: ixNpeMhConfigIsrRegister
- */
-
-void ixNpeMhConfigIsrRegister (
-    IxNpeMhNpeId npeId,
-    IxNpeMhConfigIsr isr)
-{
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhConfigIsrRegister\n");
-
-    /* check if there is already an ISR registered for this NPE */
-    if (ixNpeMhConfigNpeInfo[npeId].isr != NULL)
-    {
-        IX_NPEMH_TRACE0 (IX_NPEMH_DEBUG, "Over-writing registered NPE ISR\n");
-    }
-
-    /* save the ISR routine with the NPE info */
-    ixNpeMhConfigNpeInfo[npeId].isr = isr;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhConfigIsrRegister\n");
-}
-
-/*
- * Function definition: ixNpeMhConfigNpeInterruptEnable
- */
-
-BOOL ixNpeMhConfigNpeInterruptEnable (
-    IxNpeMhNpeId npeId)
-{
-    UINT32 ofe;
-    volatile UINT32 *controlReg =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].controlRegister;
-
-    /* get the OFE (OutFifoEnable) bit of the control register */
-    IX_NPEMH_REGISTER_READ_BITS (controlReg, &ofe, IX_NPEMH_NPE_CTL_OFE);
-
-    /* if the interrupt is disabled then we must enable it */
-    if (!ofe)
-    {
-        /* set the OFE (OutFifoEnable) bit of the control register */
-        /* we must set the OFEWE (OutFifoEnableWriteEnable) at the same */
-        /* time for the write to have effect */
-        IX_NPEMH_REGISTER_WRITE_BITS (controlReg,
-                                      (IX_NPEMH_NPE_CTL_OFE |
-                                       IX_NPEMH_NPE_CTL_OFEWE),
-                                      (IX_NPEMH_NPE_CTL_OFE |
-                                       IX_NPEMH_NPE_CTL_OFEWE));
-    }
-
-    /* return the previous state of the interrupt */
-    return (ofe != 0);
-}
-
-/*
- * Function definition: ixNpeMhConfigNpeInterruptDisable
- */
-
-BOOL ixNpeMhConfigNpeInterruptDisable (
-    IxNpeMhNpeId npeId)
-{
-    UINT32 ofe;
-    volatile UINT32 *controlReg =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].controlRegister;
-
-    /* get the OFE (OutFifoEnable) bit of the control register */
-    IX_NPEMH_REGISTER_READ_BITS (controlReg, &ofe, IX_NPEMH_NPE_CTL_OFE);
-
-    /* if the interrupt is enabled then we must disable it */
-    if (ofe)
-    {
-        /* unset the OFE (OutFifoEnable) bit of the control register */
-        /* we must set the OFEWE (OutFifoEnableWriteEnable) at the same */
-        /* time for the write to have effect */
-        IX_NPEMH_REGISTER_WRITE_BITS (controlReg,
-                                      (0                    |
-                                       IX_NPEMH_NPE_CTL_OFEWE),
-                                      (IX_NPEMH_NPE_CTL_OFE |
-                                       IX_NPEMH_NPE_CTL_OFEWE));
-    }
-
-    /* return the previous state of the interrupt */
-    return (ofe != 0);
-}
-
-/*
- * Function definition: ixNpeMhConfigMessageIdGet
- */
-
-IxNpeMhMessageId ixNpeMhConfigMessageIdGet (
-    IxNpeMhMessage message)
-{
-    /* return the most-significant byte of the first word of the */
-    /* message */
-    return ((IxNpeMhMessageId) ((message.data[0] >> 24) & 0xFF));
-}
-
-/*
- * Function definition: ixNpeMhConfigNpeIdIsValid
- */
-
-BOOL ixNpeMhConfigNpeIdIsValid (
-    IxNpeMhNpeId npeId)
-{
-    /* check that the npeId parameter is within the range of valid IDs */
-    return (npeId >= 0 && npeId < IX_NPEMH_NUM_NPES);
-}
-
-/*
- * Function definition: ixNpeMhConfigLockGet
- */
-
-void ixNpeMhConfigLockGet (
-    IxNpeMhNpeId npeId)
-{
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhConfigLockGet\n");
-
-    /* lock the mutex for this NPE */
-    (void) ixOsalMutexLock (&ixNpeMhConfigNpeInfo[npeId].mutex, 
-			    IX_OSAL_WAIT_FOREVER);
-
-    /* disable the NPE's "outFIFO not empty" interrupt */
-    ixNpeMhConfigNpeInfo[npeId].oldInterruptState =
-        ixNpeMhConfigNpeInterruptDisable (npeId);
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhConfigLockGet\n");
-}
-
-/*
- * Function definition: ixNpeMhConfigLockRelease
- */
-
-void ixNpeMhConfigLockRelease (
-    IxNpeMhNpeId npeId)
-{
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhConfigLockRelease\n");
-
-    /* if the interrupt was previously enabled */
-    if (ixNpeMhConfigNpeInfo[npeId].oldInterruptState)
-    {
-        /* enable the NPE's "outFIFO not empty" interrupt */
-        ixNpeMhConfigNpeInfo[npeId].oldInterruptState =
-            ixNpeMhConfigNpeInterruptEnable (npeId);
-    }
-
-    /* unlock the mutex for this NPE */
-    (void) ixOsalMutexUnlock (&ixNpeMhConfigNpeInfo[npeId].mutex);
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhConfigLockRelease\n");
-}
-
-/*
- * Function definition: ixNpeMhConfigInFifoWrite
- */
-
-IX_STATUS ixNpeMhConfigInFifoWrite (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage message)
-{
-    volatile UINT32 *npeInFifo =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].inFifoRegister;
-    UINT32 retriesCount = 0;
-
-    /* write the first word of the message to the NPE's inFIFO */
-    IX_NPEMH_REGISTER_WRITE (npeInFifo, message.data[0]);
-
-    /* need to wait for room to write second word - see SCR #493,
-       poll for maximum number of retries, if exceed maximum
-       retries, exit from while loop */
-    while ((IX_NPE_MH_MAX_NUM_OF_RETRIES > retriesCount)
-        && ixNpeMhConfigInFifoIsFull (npeId))
-    {
-        retriesCount++;
-    }
-
-    /* Return TIMEOUT status to caller, indicate that NPE Hang / Halt */
-    if (IX_NPE_MH_MAX_NUM_OF_RETRIES == retriesCount)
-    {
-        return IX_NPEMH_CRITICAL_NPE_ERR;   
-    }    
-    
-    /* write the second word of the message to the NPE's inFIFO */
-    IX_NPEMH_REGISTER_WRITE (npeInFifo, message.data[1]);
-
-    /* record in the stats the maximum number of retries needed */
-    if (ixNpeMhConfigStats[npeId].maxInFifoFullRetries < retriesCount)
-    {
-	ixNpeMhConfigStats[npeId].maxInFifoFullRetries = retriesCount;
-    }
-
-    /* update statistical info */
-    ixNpeMhConfigStats[npeId].inFifoWrites++;
-    
-    return IX_SUCCESS;
-}
-
-/*
- * Function definition: ixNpeMhConfigOutFifoRead
- */
-
-IX_STATUS ixNpeMhConfigOutFifoRead (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage *message)
-{
-    volatile UINT32 *npeOutFifo =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].outFifoRegister;
-    UINT32 retriesCount = 0;
-
-    /* read the first word of the message from the NPE's outFIFO */
-    IX_NPEMH_REGISTER_READ (npeOutFifo, &message->data[0]);
-
-    /* need to wait for NPE to write second word - see SCR #493 
-       poll for maximum number of retries, if exceed maximum
-       retries, exit from while loop */
-    while ((IX_NPE_MH_MAX_NUM_OF_RETRIES > retriesCount)
-        && ixNpeMhConfigOutFifoIsEmpty (npeId))
-    {
-        retriesCount++;
-    }
-
-    /* Return TIMEOUT status to caller, indicate that NPE Hang / Halt */
-    if (IX_NPE_MH_MAX_NUM_OF_RETRIES == retriesCount)
-    {
-        return IX_NPEMH_CRITICAL_NPE_ERR;   
-    } 
-    
-    /* read the second word of the message from the NPE's outFIFO */
-    IX_NPEMH_REGISTER_READ (npeOutFifo, &message->data[1]);
-
-    /* record in the stats the maximum number of retries needed */
-    if (ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries < retriesCount)
-    {
-	ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries = retriesCount;
-    }
-
-    /* update statistical info */
-    ixNpeMhConfigStats[npeId].outFifoReads++;
-    
-    return IX_SUCCESS;
-}
-
-/*
- * Function definition: ixNpeMhConfigShow
- */
-
-void ixNpeMhConfigShow (
-    IxNpeMhNpeId npeId)
-{
-    /* show the message fifo read counter */
-    IX_NPEMH_SHOW ("Message FIFO reads",
-                   ixNpeMhConfigStats[npeId].outFifoReads);
-
-    /* show the message fifo write counter */
-    IX_NPEMH_SHOW ("Message FIFO writes",
-                   ixNpeMhConfigStats[npeId].inFifoWrites);
-
-    /* show the max retries performed when inFIFO full */
-    IX_NPEMH_SHOW ("Max inFIFO Full retries",
-		   ixNpeMhConfigStats[npeId].maxInFifoFullRetries);
-
-    /* show the max retries performed when outFIFO empty */
-    IX_NPEMH_SHOW ("Max outFIFO Empty retries",
-		   ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries);
-
-    /* show the current status of the inFifo */
-    ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT,
-	       "InFifo is %s and %s\n",
-	       (ixNpeMhConfigInFifoIsEmpty (npeId) ? 
-		(int) "EMPTY" : (int) "NOT EMPTY"),
-	       (ixNpeMhConfigInFifoIsFull (npeId) ? 
-		(int) "FULL" : (int) "NOT FULL"),
-	       0, 0, 0, 0);
-
-    /* show the current status of the outFifo */
-    ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT,
-	       "OutFifo is %s and %s\n",
-	       (ixNpeMhConfigOutFifoIsEmpty (npeId) ? 
-		(int) "EMPTY" : (int) "NOT EMPTY"),
-	       (ixNpeMhConfigOutFifoIsFull (npeId) ? 
-		(int) "FULL" : (int) "NOT FULL"),
-	       0, 0, 0, 0);
-}
-
-/*
- * Function definition: ixNpeMhConfigShowReset
- */
-
-void ixNpeMhConfigShowReset (
-    IxNpeMhNpeId npeId)
-{
-    /* reset the message fifo read counter */
-    ixNpeMhConfigStats[npeId].outFifoReads = 0;
-
-    /* reset the message fifo write counter */
-    ixNpeMhConfigStats[npeId].inFifoWrites = 0;
-
-    /* reset the max inFIFO Full retries counter */
-    ixNpeMhConfigStats[npeId].maxInFifoFullRetries = 0;
-
-    /* reset the max outFIFO empty retries counter */
-    ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries = 0;
-}
-
-