Merge branch 'master' of http://www.denx.de/git/u-boot

1 files changed, 806 insertions, 0 deletions

diff --git a/cpu/ixp/npe/IxNpeDlNpeMgrUtils.c b/cpu/ixp/npe/IxNpeDlNpeMgrUtils.c
new file mode 100644
index 0000000..9dcf3c1
--- /dev/null
+++ b/cpu/ixp/npe/IxNpeDlNpeMgrUtils.c
@@ -0,0 +1,806 @@
+/**
+ * @file IxNpeDlNpeMgrUtils.c
+ *
+ * @author Intel Corporation
+ * @date 18 February 2002
+ *
+ * @brief This file contains the implementation of the private API for the 
+ *        IXP425 NPE Downloader NpeMgr Utils module
+ *
+ * 
+ * @par
+ * IXP400 SW Release version 2.0
+ * 
+ * -- Copyright Notice --
+ * 
+ * @par
+ * Copyright 2001-2005, Intel Corporation.
+ * All rights reserved.
+ * 
+ * @par
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Intel Corporation nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * 
+ * @par
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * @par
+ * -- End of Copyright Notice --
+*/
+
+
+/*
+ * Put the system defined include files required.
+ */
+#define IX_NPE_DL_MAX_NUM_OF_RETRIES 1000000 /**< Maximum number of
+                                              * retries before
+                                              * timeout
+					                          */  
+
+/*
+ * Put the user defined include files required.
+ */
+#include "IxOsal.h"
+#include "IxNpeDl.h"
+#include "IxNpeDlNpeMgrUtils_p.h"
+#include "IxNpeDlNpeMgrEcRegisters_p.h"
+#include "IxNpeDlMacros_p.h"
+
+/*
+ * #defines and macros used in this file.
+ */
+
+/* used to bit-mask a number of bytes */
+#define IX_NPEDL_MASK_LOWER_BYTE_OF_WORD  0x000000FF
+#define IX_NPEDL_MASK_LOWER_SHORT_OF_WORD 0x0000FFFF
+#define IX_NPEDL_MASK_FULL_WORD           0xFFFFFFFF
+
+#define IX_NPEDL_BYTES_PER_WORD           4
+#define IX_NPEDL_BYTES_PER_SHORT          2
+
+#define IX_NPEDL_REG_SIZE_BYTE            8
+#define IX_NPEDL_REG_SIZE_SHORT           16
+#define IX_NPEDL_REG_SIZE_WORD            32
+
+/*
+ * Introduce extra read cycles after issuing read command to NPE
+ * so that we read the register after the NPE has updated it
+ * This is to overcome race condition between XScale and NPE
+ */
+#define IX_NPEDL_DELAY_READ_CYCLES        2
+/*
+ * To mask top three MSBs of 32bit word to download into NPE IMEM
+ */
+#define IX_NPEDL_MASK_UNUSED_IMEM_BITS    0x1FFFFFFF;
+
+
+/*
+ * typedefs
+ */
+typedef struct
+{
+    UINT32 regAddress;
+    UINT32 regSize;
+} IxNpeDlCtxtRegAccessInfo;
+
+/* module statistics counters */
+typedef struct
+{
+    UINT32 insMemWrites;
+    UINT32 insMemWriteFails;
+    UINT32 dataMemWrites;
+    UINT32 dataMemWriteFails;
+    UINT32 ecsRegWrites;
+    UINT32 ecsRegReads;
+    UINT32 dbgInstructionExecs;
+    UINT32 contextRegWrites;
+    UINT32 physicalRegWrites;
+    UINT32 nextPcWrites;
+} IxNpeDlNpeMgrUtilsStats;
+
+
+/*
+ * Variable declarations global to this file only.  Externs are followed by
+ * static variables.
+ */
+
+/* 
+ * contains useful address and function pointers to read/write Context Regs, 
+ * eliminating some switch or if-else statements in places
+ */
+static IxNpeDlCtxtRegAccessInfo ixNpeDlCtxtRegAccInfo[IX_NPEDL_CTXT_REG_MAX] =
+{
+    {
+	IX_NPEDL_CTXT_REG_ADDR_STEVT,
+	IX_NPEDL_REG_SIZE_BYTE
+    },
+    {
+	IX_NPEDL_CTXT_REG_ADDR_STARTPC,
+	IX_NPEDL_REG_SIZE_SHORT
+    },
+    {
+	IX_NPEDL_CTXT_REG_ADDR_REGMAP,
+	IX_NPEDL_REG_SIZE_SHORT
+    },
+    {
+	IX_NPEDL_CTXT_REG_ADDR_CINDEX,
+	IX_NPEDL_REG_SIZE_BYTE
+    }
+};
+
+static UINT32 ixNpeDlSavedExecCount = 0;
+static UINT32 ixNpeDlSavedEcsDbgCtxtReg2 = 0;
+
+static IxNpeDlNpeMgrUtilsStats ixNpeDlNpeMgrUtilsStats;
+
+
+/*
+ * static function prototypes.
+ */
+PRIVATE __inline__ void
+ixNpeDlNpeMgrWriteCommandIssue (UINT32 npeBaseAddress, UINT32 cmd,
+				UINT32 addr, UINT32 data);
+
+PRIVATE __inline__ UINT32
+ixNpeDlNpeMgrReadCommandIssue (UINT32 npeBaseAddress, UINT32 cmd, UINT32 addr);
+
+PRIVATE IX_STATUS
+ixNpeDlNpeMgrLogicalRegRead (UINT32 npeBaseAddress, UINT32 regAddr,
+			     UINT32 regSize, UINT32 ctxtNum, UINT32 *regVal);
+
+PRIVATE IX_STATUS
+ixNpeDlNpeMgrLogicalRegWrite (UINT32 npeBaseAddress, UINT32 regAddr,
+			      UINT32 regVal, UINT32 regSize,
+			      UINT32 ctxtNum, BOOL verify);
+
+/*
+ * Function definition: ixNpeDlNpeMgrWriteCommandIssue
+ */
+PRIVATE __inline__ void
+ixNpeDlNpeMgrWriteCommandIssue (
+    UINT32 npeBaseAddress,
+    UINT32 cmd,
+    UINT32 addr,
+    UINT32 data)
+{
+    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, data);
+    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXAD, addr);
+    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrReadCommandIssue
+ */
+PRIVATE __inline__ UINT32
+ixNpeDlNpeMgrReadCommandIssue (
+    UINT32 npeBaseAddress,
+    UINT32 cmd,
+    UINT32 addr)
+{
+    UINT32 data = 0;
+    int i;
+
+    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXAD, addr);
+    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
+    for (i = 0; i <= IX_NPEDL_DELAY_READ_CYCLES; i++)
+    {
+	IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, &data);
+    }
+
+    return data;
+}
+
+/*
+ * Function definition: ixNpeDlNpeMgrInsMemWrite
+ */
+IX_STATUS
+ixNpeDlNpeMgrInsMemWrite (
+    UINT32 npeBaseAddress,
+    UINT32 insMemAddress,
+    UINT32 insMemData,
+    BOOL verify)
+{
+    UINT32 insMemDataRtn;
+
+    ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress,
+				    IX_NPEDL_EXCTL_CMD_WR_INS_MEM,
+				    insMemAddress, insMemData);
+    if (verify)
+    {
+        /* write invalid data to this reg, so we can see if we're reading 
+	   the EXDATA register too early */
+	IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA,
+			    ~insMemData);
+
+        /*Disabled since top 3 MSB are not used for Azusa hardware Refer WR:IXA00053900*/
+        insMemData&=IX_NPEDL_MASK_UNUSED_IMEM_BITS;
+
+        insMemDataRtn=ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress,
+                                           IX_NPEDL_EXCTL_CMD_RD_INS_MEM,
+                                           insMemAddress);
+
+        insMemDataRtn&=IX_NPEDL_MASK_UNUSED_IMEM_BITS;
+
+	if (insMemData != insMemDataRtn)
+	{
+	    ixNpeDlNpeMgrUtilsStats.insMemWriteFails++;
+	    return IX_FAIL;
+	}
+    }
+
+    ixNpeDlNpeMgrUtilsStats.insMemWrites++;
+    return IX_SUCCESS;
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrDataMemWrite
+ */
+IX_STATUS
+ixNpeDlNpeMgrDataMemWrite (
+    UINT32 npeBaseAddress,
+    UINT32 dataMemAddress,
+    UINT32 dataMemData,
+    BOOL verify)
+{
+    ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress,
+				    IX_NPEDL_EXCTL_CMD_WR_DATA_MEM,
+				    dataMemAddress, dataMemData);
+    if (verify)
+    {
+        /* write invalid data to this reg, so we can see if we're reading 
+	   the EXDATA register too early */
+	IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, ~dataMemData);
+
+	if (dataMemData !=
+	    ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress,
+					   IX_NPEDL_EXCTL_CMD_RD_DATA_MEM,
+					   dataMemAddress))
+	{
+	    ixNpeDlNpeMgrUtilsStats.dataMemWriteFails++;
+	    return IX_FAIL;
+	}
+    }
+
+    ixNpeDlNpeMgrUtilsStats.dataMemWrites++;
+    return IX_SUCCESS;
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrExecAccRegWrite
+ */
+void
+ixNpeDlNpeMgrExecAccRegWrite (
+    UINT32 npeBaseAddress,
+    UINT32 regAddress,
+    UINT32 regData)
+{
+    ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress,
+				    IX_NPEDL_EXCTL_CMD_WR_ECS_REG,
+				    regAddress, regData);
+    ixNpeDlNpeMgrUtilsStats.ecsRegWrites++;
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrExecAccRegRead
+ */
+UINT32
+ixNpeDlNpeMgrExecAccRegRead (
+    UINT32 npeBaseAddress,
+    UINT32 regAddress)
+{
+    ixNpeDlNpeMgrUtilsStats.ecsRegReads++;
+    return ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress,
+					  IX_NPEDL_EXCTL_CMD_RD_ECS_REG,
+					  regAddress);
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrCommandIssue
+ */
+void
+ixNpeDlNpeMgrCommandIssue (
+    UINT32 npeBaseAddress,
+    UINT32 command)     
+{
+    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
+		     "Entering ixNpeDlNpeMgrCommandIssue\n");
+
+    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, command);
+
+    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
+		     "Exiting ixNpeDlNpeMgrCommandIssue\n");
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrDebugInstructionPreExec
+ */
+void
+ixNpeDlNpeMgrDebugInstructionPreExec(
+    UINT32 npeBaseAddress)
+{
+    /* turn off the halt bit by clearing Execution Count register. */
+    /* save reg contents 1st and restore later */
+    IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT,
+		       &ixNpeDlSavedExecCount);
+    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT, 0);
+
+    /* ensure that IF and IE are on (temporarily), so that we don't end up
+     * stepping forever */
+    ixNpeDlSavedEcsDbgCtxtReg2 = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress,
+				                   IX_NPEDL_ECS_DBG_CTXT_REG_2);
+
+    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_2,
+				  (ixNpeDlSavedEcsDbgCtxtReg2 |
+				   IX_NPEDL_MASK_ECS_DBG_REG_2_IF |
+				   IX_NPEDL_MASK_ECS_DBG_REG_2_IE));
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrDebugInstructionExec
+ */
+IX_STATUS
+ixNpeDlNpeMgrDebugInstructionExec(
+    UINT32 npeBaseAddress,
+    UINT32 npeInstruction,
+    UINT32 ctxtNum,
+    UINT32 ldur)
+{
+    UINT32 ecsDbgRegVal;
+    UINT32 oldWatchcount, newWatchcount;
+    UINT32 retriesCount = 0;
+    IX_STATUS status = IX_SUCCESS;
+
+    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
+		     "Entering ixNpeDlNpeMgrDebugInstructionExec\n");
+
+    /* set the Active bit, and the LDUR, in the debug level */
+    ecsDbgRegVal = IX_NPEDL_MASK_ECS_REG_0_ACTIVE |
+	(ldur << IX_NPEDL_OFFSET_ECS_REG_0_LDUR);
+
+    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0,
+				  ecsDbgRegVal);
+
+    /*
+     * set CCTXT at ECS DEBUG L3 to specify in which context to execute the
+     * instruction, and set SELCTXT at ECS DEBUG Level to specify which context
+     * store to access.
+     * Debug ECS Level Reg 1 has form  0x000n000n, where n = context number
+     */
+    ecsDbgRegVal = (ctxtNum << IX_NPEDL_OFFSET_ECS_REG_1_CCTXT) |
+	(ctxtNum << IX_NPEDL_OFFSET_ECS_REG_1_SELCTXT);
+
+    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_1,
+				  ecsDbgRegVal);
+
+    /* clear the pipeline */
+    ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
+
+    /* load NPE instruction into the instruction register */
+    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_INSTRUCT_REG,
+				  npeInstruction);
+
+    /* we need this value later to wait for completion of NPE execution step */
+    IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, &oldWatchcount);
+
+    /* issue a Step One command via the Execution Control register */
+    ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_STEP);
+
+	/* Watch Count register increments when NPE completes an instruction */
+	IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC,
+        &newWatchcount);
+        
+    /*
+     * force the XScale to wait until the NPE has finished execution step
+     * NOTE that this delay will be very small, just long enough to allow a
+     * single NPE instruction to complete execution; if instruction execution
+     * is not completed before timeout retries, exit the while loop
+     */
+    while ((IX_NPE_DL_MAX_NUM_OF_RETRIES > retriesCount) 
+        && (newWatchcount == oldWatchcount))
+    {
+	    /* Watch Count register increments when NPE completes an instruction */
+	    IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC,
+		    &newWatchcount);
+			   
+        retriesCount++;
+    }    
+
+    if (IX_NPE_DL_MAX_NUM_OF_RETRIES > retriesCount)
+    {
+        ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs++;
+    }
+    else
+    {
+        /* Return timeout status as the instruction has not been executed
+         * after maximum retries */
+        status = IX_NPEDL_CRITICAL_NPE_ERR;
+    }
+    
+    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
+		     "Exiting ixNpeDlNpeMgrDebugInstructionExec\n");
+		     
+    return status;
+}    
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrDebugInstructionPostExec
+ */
+void
+ixNpeDlNpeMgrDebugInstructionPostExec(
+    UINT32 npeBaseAddress)
+{
+    /* clear active bit in debug level */
+    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0,
+				  0);
+
+    /* clear the pipeline */
+    ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
+    
+    /* restore Execution Count register contents. */
+    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT,
+			ixNpeDlSavedExecCount);
+
+    /* restore IF and IE bits to original values */
+    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_2,
+				  ixNpeDlSavedEcsDbgCtxtReg2);
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrLogicalRegRead
+ */
+PRIVATE IX_STATUS
+ixNpeDlNpeMgrLogicalRegRead (
+    UINT32 npeBaseAddress, 
+    UINT32 regAddr,
+    UINT32 regSize,
+    UINT32 ctxtNum,
+    UINT32 *regVal)
+{
+    IX_STATUS status = IX_SUCCESS;
+    UINT32 npeInstruction = 0;
+    UINT32 mask = 0;
+
+    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
+		     "Entering ixNpeDlNpeMgrLogicalRegRead\n");
+
+    switch (regSize)
+    {
+    case IX_NPEDL_REG_SIZE_BYTE:
+      npeInstruction = IX_NPEDL_INSTR_RD_REG_BYTE;
+      mask = IX_NPEDL_MASK_LOWER_BYTE_OF_WORD;  break;
+    case IX_NPEDL_REG_SIZE_SHORT:
+      npeInstruction = IX_NPEDL_INSTR_RD_REG_SHORT;
+      mask = IX_NPEDL_MASK_LOWER_SHORT_OF_WORD;  break;
+    case IX_NPEDL_REG_SIZE_WORD:
+      npeInstruction = IX_NPEDL_INSTR_RD_REG_WORD;
+      mask = IX_NPEDL_MASK_FULL_WORD;  break;
+    }
+
+    /* make regAddr be the SRC and DEST operands (e.g. movX d0, d0) */
+    npeInstruction |= (regAddr << IX_NPEDL_OFFSET_INSTR_SRC) |
+	(regAddr << IX_NPEDL_OFFSET_INSTR_DEST);
+
+    /* step execution of NPE intruction using Debug Executing Context stack */
+    status = ixNpeDlNpeMgrDebugInstructionExec (npeBaseAddress, npeInstruction,
+				       ctxtNum, IX_NPEDL_RD_INSTR_LDUR);
+
+    if (IX_SUCCESS != status)
+    {
+        return status;
+    }
+    
+    /* read value of register from Execution Data register */
+    IX_NPEDL_REG_READ (npeBaseAddress,	IX_NPEDL_REG_OFFSET_EXDATA, regVal);
+
+   /* align value from left to right */
+    *regVal = (*regVal >> (IX_NPEDL_REG_SIZE_WORD - regSize)) & mask;
+
+    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
+		     "Exiting ixNpeDlNpeMgrLogicalRegRead\n");
+    
+    return IX_SUCCESS;
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrLogicalRegWrite
+ */
+PRIVATE IX_STATUS
+ixNpeDlNpeMgrLogicalRegWrite (
+    UINT32 npeBaseAddress, 
+    UINT32 regAddr,
+    UINT32 regVal,
+    UINT32 regSize,
+    UINT32 ctxtNum,
+    BOOL verify)
+{
+    UINT32 npeInstruction = 0;
+    UINT32 mask = 0;
+    IX_STATUS status = IX_SUCCESS;
+    UINT32 retRegVal;
+
+    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
+		     "Entering ixNpeDlNpeMgrLogicalRegWrite\n");
+
+    if (regSize == IX_NPEDL_REG_SIZE_WORD)
+    {
+	/* NPE register addressing is left-to-right: e.g. |d0|d1|d2|d3| */
+	/* Write upper half-word (short) to |d0|d1| */
+	status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, regAddr,
+				      regVal >> IX_NPEDL_REG_SIZE_SHORT,
+				      IX_NPEDL_REG_SIZE_SHORT,
+				      ctxtNum, verify);
+				      
+	if (IX_SUCCESS != status)
+	{
+	    return status;
+	}
+	
+	/* Write lower half-word (short) to |d2|d3| */
+	status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress,
+				      regAddr + IX_NPEDL_BYTES_PER_SHORT,
+                                    regVal & IX_NPEDL_MASK_LOWER_SHORT_OF_WORD,
+				      IX_NPEDL_REG_SIZE_SHORT,
+				      ctxtNum, verify);
+    
+    if (IX_SUCCESS != status)
+	{
+	    return status;
+	}
+	}
+    else
+    {
+        switch (regSize)
+	{ 
+	case IX_NPEDL_REG_SIZE_BYTE:
+	    npeInstruction = IX_NPEDL_INSTR_WR_REG_BYTE;
+	    mask = IX_NPEDL_MASK_LOWER_BYTE_OF_WORD;  break;
+	case IX_NPEDL_REG_SIZE_SHORT:
+            npeInstruction = IX_NPEDL_INSTR_WR_REG_SHORT;
+	    mask = IX_NPEDL_MASK_LOWER_SHORT_OF_WORD;  break;
+	}
+	/* mask out any redundant bits, so verify will work later */
+	regVal &= mask;
+
+	/* fill dest operand field of  instruction with destination reg addr */
+	npeInstruction |= (regAddr << IX_NPEDL_OFFSET_INSTR_DEST);
+
+	/* fill src operand field of instruction with least-sig 5 bits of val*/
+	npeInstruction |= ((regVal & IX_NPEDL_MASK_IMMED_INSTR_SRC_DATA) <<
+			   IX_NPEDL_OFFSET_INSTR_SRC);
+
+	/* fill coprocessor field of instruction with most-sig 11 bits of val*/
+	npeInstruction |= ((regVal & IX_NPEDL_MASK_IMMED_INSTR_COPROC_DATA) <<
+			   IX_NPEDL_DISPLACE_IMMED_INSTR_COPROC_DATA);
+
+	/* step execution of NPE intruction using Debug ECS */
+	status = ixNpeDlNpeMgrDebugInstructionExec(npeBaseAddress, npeInstruction,
+					  ctxtNum, IX_NPEDL_WR_INSTR_LDUR);
+					  
+	if (IX_SUCCESS != status)
+	{
+	    return status;  
+	} 
+    }/* condition: if reg to be written is 8-bit or 16-bit (not 32-bit) */
+
+    if (verify)
+    {
+    	status = ixNpeDlNpeMgrLogicalRegRead (npeBaseAddress, regAddr,
+    						   regSize, ctxtNum, &retRegVal);
+    						   
+        if (IX_SUCCESS == status)
+        {
+            if (regVal != retRegVal)
+            {
+                status = IX_FAIL;
+            }
+        }        
+    }
+
+    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
+		     "Exiting ixNpeDlNpeMgrLogicalRegWrite : status = %d\n",
+		     status);
+    
+    return status;
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrPhysicalRegWrite
+ */
+IX_STATUS
+ixNpeDlNpeMgrPhysicalRegWrite (
+    UINT32 npeBaseAddress,
+    UINT32 regAddr,
+    UINT32 regValue,
+    BOOL verify)
+{
+    IX_STATUS status;
+
+    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
+		     "Entering ixNpeDlNpeMgrPhysicalRegWrite\n");
+
+/*
+ * There are 32 physical registers used in an NPE.  These are
+ * treated as 16 pairs of 32-bit registers.  To write one of the pair,
+ * write the pair number (0-16) to the REGMAP for Context 0.  Then write
+ * the value to register  0 or 4 in the regfile, depending on which
+ * register of the pair is to be written
+ */
+
+    /*
+     * set REGMAP for context 0 to (regAddr >> 1) to choose which pair (0-16)
+     * of physical registers to write 
+     */
+    status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress,
+					   IX_NPEDL_CTXT_REG_ADDR_REGMAP,
+					   (regAddr >>
+					  IX_NPEDL_OFFSET_PHYS_REG_ADDR_REGMAP),
+					   IX_NPEDL_REG_SIZE_SHORT, 0, verify);
+    if (status == IX_SUCCESS)
+    {
+	/* regAddr = 0 or 4  */
+	regAddr = (regAddr & IX_NPEDL_MASK_PHYS_REG_ADDR_LOGICAL_ADDR) *
+	    IX_NPEDL_BYTES_PER_WORD;
+    
+    status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, regAddr, regValue, 
+					   IX_NPEDL_REG_SIZE_WORD, 0, verify);
+    }
+    
+    if (status != IX_SUCCESS)
+    {
+	IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrPhysicalRegWrite: "
+			       "error writing to physical register\n");
+    }
+
+    ixNpeDlNpeMgrUtilsStats.physicalRegWrites++;
+
+    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
+		     "Exiting ixNpeDlNpeMgrPhysicalRegWrite : status = %d\n",
+		     status);
+    return status;
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrCtxtRegWrite
+ */
+IX_STATUS
+ixNpeDlNpeMgrCtxtRegWrite (
+    UINT32 npeBaseAddress,
+    UINT32 ctxtNum,
+    IxNpeDlCtxtRegNum ctxtReg,
+    UINT32 ctxtRegVal,
+    BOOL verify)
+{
+    UINT32 tempRegVal;
+    UINT32 ctxtRegAddr;
+    UINT32 ctxtRegSize;
+    IX_STATUS status = IX_SUCCESS;
+
+    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, 
+		     "Entering ixNpeDlNpeMgrCtxtRegWrite\n");
+
+    /*
+     * Context 0 has no STARTPC. Instead, this value is used to set
+     * NextPC for Background ECS, to set where NPE starts executing code
+     */
+    if ((ctxtNum == 0) && (ctxtReg == IX_NPEDL_CTXT_REG_STARTPC))
+    {
+	/* read BG_CTXT_REG_0, update NEXTPC bits, and write back to reg */
+	tempRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress,
+						  IX_NPEDL_ECS_BG_CTXT_REG_0);
+	tempRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_NEXTPC;
+	tempRegVal |= (ctxtRegVal << IX_NPEDL_OFFSET_ECS_REG_0_NEXTPC) &
+	    IX_NPEDL_MASK_ECS_REG_0_NEXTPC;
+	
+	ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress,
+				      IX_NPEDL_ECS_BG_CTXT_REG_0, tempRegVal);
+
+	ixNpeDlNpeMgrUtilsStats.nextPcWrites++;
+    }
+    else
+    {
+	ctxtRegAddr = ixNpeDlCtxtRegAccInfo[ctxtReg].regAddress;
+	ctxtRegSize = ixNpeDlCtxtRegAccInfo[ctxtReg].regSize;
+	status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, ctxtRegAddr,
+					       ctxtRegVal, ctxtRegSize,
+					       ctxtNum, verify);
+	if (status != IX_SUCCESS)
+	{
+	    IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrCtxtRegWrite: "
+				   "error writing to context store register\n");
+	}
+	
+	ixNpeDlNpeMgrUtilsStats.contextRegWrites++;
+    }
+
+    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, 
+		     "Exiting ixNpeDlNpeMgrCtxtRegWrite : status = %d\n",
+		     status);
+
+    return status;
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrUtilsStatsShow
+ */
+void
+ixNpeDlNpeMgrUtilsStatsShow (void)
+{
+    ixOsalLog (IX_OSAL_LOG_LVL_USER,
+               IX_OSAL_LOG_DEV_STDOUT,
+               "\nixNpeDlNpeMgrUtilsStatsShow:\n"
+               "\tInstruction Memory writes: %u\n"
+               "\tInstruction Memory writes failed: %u\n"
+               "\tData Memory writes: %u\n"
+               "\tData Memory writes failed: %u\n",
+               ixNpeDlNpeMgrUtilsStats.insMemWrites,
+               ixNpeDlNpeMgrUtilsStats.insMemWriteFails,
+               ixNpeDlNpeMgrUtilsStats.dataMemWrites,
+               ixNpeDlNpeMgrUtilsStats.dataMemWriteFails,
+               0,0);
+
+    ixOsalLog (IX_OSAL_LOG_LVL_USER,
+               IX_OSAL_LOG_DEV_STDOUT,
+               "\tExecuting Context Stack Register writes: %u\n"
+               "\tExecuting Context Stack Register reads: %u\n"
+               "\tPhysical Register writes: %u\n"
+               "\tContext Store Register writes: %u\n"
+               "\tExecution Backgound Context NextPC writes: %u\n"
+               "\tDebug Instructions Executed: %u\n\n",
+               ixNpeDlNpeMgrUtilsStats.ecsRegWrites,
+               ixNpeDlNpeMgrUtilsStats.ecsRegReads,
+               ixNpeDlNpeMgrUtilsStats.physicalRegWrites,
+               ixNpeDlNpeMgrUtilsStats.contextRegWrites,
+               ixNpeDlNpeMgrUtilsStats.nextPcWrites,
+               ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs);
+}
+
+
+/*
+ * Function definition: ixNpeDlNpeMgrUtilsStatsReset
+ */
+void
+ixNpeDlNpeMgrUtilsStatsReset (void)
+{
+    ixNpeDlNpeMgrUtilsStats.insMemWrites = 0;
+    ixNpeDlNpeMgrUtilsStats.insMemWriteFails = 0;
+    ixNpeDlNpeMgrUtilsStats.dataMemWrites = 0;
+    ixNpeDlNpeMgrUtilsStats.dataMemWriteFails = 0;
+    ixNpeDlNpeMgrUtilsStats.ecsRegWrites = 0;
+    ixNpeDlNpeMgrUtilsStats.ecsRegReads = 0;
+    ixNpeDlNpeMgrUtilsStats.physicalRegWrites = 0;
+    ixNpeDlNpeMgrUtilsStats.contextRegWrites = 0;
+    ixNpeDlNpeMgrUtilsStats.nextPcWrites = 0;
+    ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs = 0;
+}