arm: Move cpu/$CPU to arch/arm/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 0 insertions, 2641 deletions

diff --git a/cpu/ixp/npe/IxEthAccMac.c b/cpu/ixp/npe/IxEthAccMac.c
deleted file mode 100644
index 369ee91..0000000
--- a/cpu/ixp/npe/IxEthAccMac.c
+++ /dev/null
@@ -1,2641 +0,0 @@
-/**
- * @file IxEthAccMac.c
- *
- * @author Intel Corporation
- * @date
- *
- * @brief  MAC control functions
- *
- * Design Notes:
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Intel Corporation nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxOsal.h"
-#include "IxNpeMh.h"
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-#include "IxEthDB.h"
-#endif
-#include "IxEthDBPortDefs.h"
-#include "IxEthNpe.h"
-#include "IxEthAcc.h"
-#include "IxEthAccDataPlane_p.h"
-#include "IxEthAcc_p.h"
-#include "IxEthAccMac_p.h"
-
-/* Maximum number of retries during ixEthAccPortDisable, which
- * is approximately 10 seconds
-*/
-#define IX_ETH_ACC_MAX_RETRY 500
-
-/* Maximum number of retries during ixEthAccPortDisable when expecting
- * timeout
- */
-#define IX_ETH_ACC_MAX_RETRY_TIMEOUT 5
-
-#define IX_ETH_ACC_VALIDATE_PORT_ID(portId) \
-    do                                                           \
-    {                                                            \
-        if(!IX_ETH_ACC_IS_PORT_VALID(portId))   \
-        {                                                        \
-	    return IX_ETH_ACC_INVALID_PORT;                      \
-        }                                                        \
-    } while(0)
-
-PUBLIC IxEthAccMacState ixEthAccMacState[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-PRIVATE UINT32 ixEthAccMacBase[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-/*Forward function declarations*/
-PRIVATE void
-ixEthAccPortDisableRx (IxEthAccPortId portId,
-		       IX_OSAL_MBUF * mBufPtr,
-		       BOOL useMultiBufferCallback);
-
-PRIVATE void
-ixEthAccPortDisableRxAndReplenish (IxEthAccPortId portId,
-				   IX_OSAL_MBUF * mBufPtr,
-				   BOOL useMultiBufferCallback);
-
-PRIVATE void
-ixEthAccPortDisableTxDone (UINT32 cbTag,
-			   IX_OSAL_MBUF *mbuf);
-
-PRIVATE void
-ixEthAccPortDisableTxDoneAndSubmit (UINT32 cbTag,
-				    IX_OSAL_MBUF *mbuf);
-
-PRIVATE void
-ixEthAccPortDisableRxCallback (UINT32 cbTag,
-			       IX_OSAL_MBUF * mBufPtr,
-			       UINT32 learnedPortId);
-
-PRIVATE void
-ixEthAccPortDisableMultiBufferRxCallback (UINT32 cbTag,
-					  IX_OSAL_MBUF **mBufPtr);
-
-PRIVATE IxEthAccStatus
-ixEthAccPortDisableTryTransmit(UINT32 portId);
-
-PRIVATE IxEthAccStatus
-ixEthAccPortDisableTryReplenish(UINT32 portId);
-
-PRIVATE IxEthAccStatus
-ixEthAccPortMulticastMacAddressGet (IxEthAccPortId portId,
-				    IxEthAccMacAddr *macAddr);
-
-PRIVATE IxEthAccStatus
-ixEthAccPortMulticastMacFilterGet (IxEthAccPortId portId,
-				   IxEthAccMacAddr *macAddr);
-
-PRIVATE void
-ixEthAccMacNpeStatsMessageCallback (IxNpeMhNpeId npeId,
-				    IxNpeMhMessage msg);
-
-PRIVATE void
-ixEthAccMacNpeStatsResetMessageCallback (IxNpeMhNpeId npeId,
-					 IxNpeMhMessage msg);
-
-PRIVATE void
-ixEthAccNpeLoopbackMessageCallback (IxNpeMhNpeId npeId,
-				    IxNpeMhMessage msg);
-
-PRIVATE void
-ixEthAccMulticastAddressSet(IxEthAccPortId portId);
-
-PRIVATE BOOL
-ixEthAccMacEqual(IxEthAccMacAddr *macAddr1,
-		 IxEthAccMacAddr *macAddr2);
-
-PRIVATE void
-ixEthAccMacPrint(IxEthAccMacAddr *m);
-
-PRIVATE void
-ixEthAccMacStateUpdate(IxEthAccPortId portId);
-
-IxEthAccStatus
-ixEthAccMacMemInit(void)
-{
-    ixEthAccMacBase[IX_ETH_PORT_1] =
-	(UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_0_BASE,
-				 IX_OSAL_IXP400_ETHA_MAP_SIZE);
-    ixEthAccMacBase[IX_ETH_PORT_2] =
-	(UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_1_BASE,
-				 IX_OSAL_IXP400_ETHB_MAP_SIZE);
-#ifdef __ixp46X
-    ixEthAccMacBase[IX_ETH_PORT_3] =
-	(UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_2_BASE,
-				 IX_OSAL_IXP400_ETH_NPEA_MAP_SIZE);
-    if (ixEthAccMacBase[IX_ETH_PORT_3] == 0)
-    {
-	ixOsalLog(IX_OSAL_LOG_LVL_FATAL,
-		  IX_OSAL_LOG_DEV_STDOUT,
-		  "EthAcc: Could not map MAC I/O memory\n",
-		  0, 0, 0, 0, 0 ,0);
-
-	return IX_ETH_ACC_FAIL;
-    }
-#endif
-
-    if (ixEthAccMacBase[IX_ETH_PORT_1] == 0
-	|| ixEthAccMacBase[IX_ETH_PORT_2] == 0)
-    {
-	ixOsalLog(IX_OSAL_LOG_LVL_FATAL,
-		  IX_OSAL_LOG_DEV_STDOUT,
-		  "EthAcc: Could not map MAC I/O memory\n",
-		  0, 0, 0, 0, 0 ,0);
-
-	return IX_ETH_ACC_FAIL;
-    }
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-void
-ixEthAccMacUnload(void)
-{
-    IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_1]);
-    IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_2]);
-#ifdef __ixp46X
-    IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_3]);
-    ixEthAccMacBase[IX_ETH_PORT_3] = 0;
-#endif
-    ixEthAccMacBase[IX_ETH_PORT_2] = 0;
-    ixEthAccMacBase[IX_ETH_PORT_1] = 0;
-}
-
-IxEthAccStatus
-ixEthAccPortEnablePriv(IxEthAccPortId portId)
-{
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable port.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-        printf("EthAcc: (Mac) cannot enable port %d, port not initialized\n", portId);
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    if (ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn == NULL)
-    {
-        /* TxDone callback not registered */
-        printf("EthAcc: (Mac) cannot enable port %d, TxDone callback not registered\n", portId);
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    if ((ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn == NULL)
-	&& (ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn == NULL))
-    {
-        /* Receive callback not registered */
-        printf("EthAcc: (Mac) cannot enable port %d, Rx callback not registered\n", portId);
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    if(!ixEthAccMacState[portId].initDone)
-    {
-        printf("EthAcc: (Mac) cannot enable port %d, MAC address not set\n", portId);
-	return (IX_ETH_ACC_MAC_UNINITIALIZED);
-    }
-
-    /* if the state is being set to what it is already at, do nothing*/
-    if (ixEthAccMacState[portId].enabled)
-    {
-        return IX_ETH_ACC_SUCCESS;
-    }
-
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-    /* enable ethernet database for this port */
-    if (ixEthDBPortEnable(portId) != IX_ETH_DB_SUCCESS)
-    {
-        printf("EthAcc: (Mac) cannot enable port %d, EthDB failure\n", portId);
-        return IX_ETH_ACC_FAIL;
-    }
-#endif
-
-    /* set the MAC core registers */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL2,
-	      IX_ETH_ACC_TX_CNTRL2_RETRIES_MASK);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RANDOM_SEED,
-	      IX_ETH_ACC_RANDOM_SEED_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_THRESH_P_EMPTY,
-	      IX_ETH_ACC_MAC_THRESH_P_EMPTY_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_THRESH_P_FULL,
-	      IX_ETH_ACC_MAC_THRESH_P_FULL_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_DEFER,
-	      IX_ETH_ACC_MAC_TX_DEFER_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_TWO_DEFER_1,
-	      IX_ETH_ACC_MAC_TX_TWO_DEFER_1_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_TWO_DEFER_2,
-	      IX_ETH_ACC_MAC_TX_TWO_DEFER_2_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_SLOT_TIME,
-	      IX_ETH_ACC_MAC_SLOT_TIME_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH,
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_BUF_SIZE_TX,
-	      IX_ETH_ACC_MAC_BUF_SIZE_TX_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      IX_ETH_ACC_TX_CNTRL1_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      IX_ETH_ACC_RX_CNTRL1_DEFAULT);
-
-    /* set the global state */
-    ixEthAccMacState[portId].portDisableState = ACTIVE;
-    ixEthAccMacState[portId].enabled = TRUE;
-
-    /* rewrite the setup (including mac filtering) depending
-     * on current options
-     */
-    ixEthAccMacStateUpdate(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-/*
- * PortDisable local variables. They contain the intermediate steps
- * while the port is being disabled and the buffers being drained out
- * of the NPE.
- */
-typedef void (*IxEthAccPortDisableRx)(IxEthAccPortId portId,
-				      IX_OSAL_MBUF * mBufPtr,
-				      BOOL useMultiBufferCallback);
-static IxEthAccPortRxCallback
-ixEthAccPortDisableFn[IX_ETH_ACC_NUMBER_OF_PORTS];
-static IxEthAccPortMultiBufferRxCallback
-ixEthAccPortDisableMultiBufferFn[IX_ETH_ACC_NUMBER_OF_PORTS];
-static IxEthAccPortDisableRx
-ixEthAccPortDisableRxTable[IX_ETH_ACC_NUMBER_OF_PORTS];
-static UINT32
-ixEthAccPortDisableCbTag[IX_ETH_ACC_NUMBER_OF_PORTS];
-static UINT32
-ixEthAccPortDisableMultiBufferCbTag[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-static IxEthAccPortTxDoneCallback
-ixEthAccPortDisableTxDoneFn[IX_ETH_ACC_NUMBER_OF_PORTS];
-static UINT32
-ixEthAccPortDisableTxDoneCbTag[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-static UINT32
-ixEthAccPortDisableUserBufferCount[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-/*
- * PortDisable private callbacks functions. They handle the user
- * traffic, and the special buffers (one for tx, one for rx) used
- * in portDisable.
- */
-PRIVATE void
-ixEthAccPortDisableTxDone(UINT32 cbTag,
-			  IX_OSAL_MBUF *mbuf)
-{
-    IxEthAccPortId portId = (IxEthAccPortId)cbTag;
-    volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState;
-
-    /* check for the special mbuf used in portDisable */
-    if (mbuf == ixEthAccMacState[portId].portDisableTxMbufPtr)
-    {
-        *txState = TRANSMIT_DONE;
-    }
-    else
-    {
-	/* increment the count of user traffic during portDisable */
-	ixEthAccPortDisableUserBufferCount[portId]++;
-
-       /* call client TxDone function */
-        ixEthAccPortDisableTxDoneFn[portId](ixEthAccPortDisableTxDoneCbTag[portId], mbuf);
-    }
-}
-
-PRIVATE IxEthAccStatus
-ixEthAccPortDisableTryTransmit(UINT32 portId)
-{
-    int key;
-    IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
-    volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState;
-    /* transmit the special buffer again if it is transmitted
-     * and update the txState
-     * This section is protected because the portDisable context
-     * run an identical code, so the system keeps transmitting at the
-     * maximum rate.
-     */
-    key = ixOsalIrqLock();
-    if (*txState == TRANSMIT_DONE)
-    {
-	IX_OSAL_MBUF *mbufTxPtr = ixEthAccMacState[portId].portDisableTxMbufPtr;
-	*txState = TRANSMIT;
-	status = ixEthAccPortTxFrameSubmit(portId,
-					   mbufTxPtr,
-					   IX_ETH_ACC_TX_DEFAULT_PRIORITY);
-    }
-    ixOsalIrqUnlock(key);
-
-    return status;
-}
-
-PRIVATE void
-ixEthAccPortDisableTxDoneAndSubmit(UINT32 cbTag,
-				   IX_OSAL_MBUF *mbuf)
-{
-    IxEthAccPortId portId = (IxEthAccPortId)cbTag;
-
-    /* call the callback which forwards the traffic to the client */
-    ixEthAccPortDisableTxDone(cbTag, mbuf);
-
-    /* try to transmit the buffer used in portDisable
-     * if seen in TxDone
-     */
-    ixEthAccPortDisableTryTransmit(portId);
-}
-
-PRIVATE void
-ixEthAccPortDisableRx (IxEthAccPortId portId,
-		       IX_OSAL_MBUF * mBufPtr,
-		       BOOL useMultiBufferCallback)
-{
-    volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState;
-    IX_OSAL_MBUF *mNextPtr;
-
-    while (mBufPtr)
-    {
-	mNextPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mBufPtr);
-	IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mBufPtr) = NULL;
-
-	/* check for the special mbuf used in portDisable */
-	if (mBufPtr == ixEthAccMacState[portId].portDisableRxMbufPtr)
-	{
-            *rxState = RECEIVE;
-	}
-	else
-	{
-	    /* increment the count of user traffic during portDisable */
-	    ixEthAccPortDisableUserBufferCount[portId]++;
-
-	    /* reset the received payload length during portDisable */
-	    IX_OSAL_MBUF_MLEN(mBufPtr)    = 0;
-	    IX_OSAL_MBUF_PKT_LEN(mBufPtr) = 0;
-
-	    if (useMultiBufferCallback)
-	    {
-		/* call the user callback with one unchained
-		 * buffer, without payload. A small array is built
-		 * to be used as a parameter (the user callback expects
-		 * to receive an array ended by a NULL pointer.
-		 */
-		IX_OSAL_MBUF *mBufPtrArray[2];
-
-		mBufPtrArray[0] = mBufPtr;
-		mBufPtrArray[1] = NULL;
-		ixEthAccPortDisableMultiBufferFn[portId](
-			 ixEthAccPortDisableMultiBufferCbTag[portId],
-			 mBufPtrArray);
-	    }
-	    else
-	    {
-		/* call the user callback with a unchained
-		 * buffer, without payload and the destination port is
-		 * unknown.
-		 */
-		ixEthAccPortDisableFn[portId](
-		      ixEthAccPortDisableCbTag[portId],
-		      mBufPtr,
-		      IX_ETH_DB_UNKNOWN_PORT /* port not found */);
-	    }
-        }
-
-        mBufPtr = mNextPtr;
-    }
-}
-
-PRIVATE IxEthAccStatus
-ixEthAccPortDisableTryReplenish(UINT32 portId)
-{
-    int key;
-    IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
-    volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState;
-    /* replenish with the special buffer again if it is received
-     * and update the rxState
-     * This section is protected because the portDisable context
-     * run an identical code, so the system keeps replenishing at the
-     * maximum rate.
-     */
-    key = ixOsalIrqLock();
-    if (*rxState == RECEIVE)
-    {
-	IX_OSAL_MBUF *mbufRxPtr = ixEthAccMacState[portId].portDisableRxMbufPtr;
-	*rxState = REPLENISH;
-	IX_OSAL_MBUF_MLEN(mbufRxPtr) = IX_ETHACC_RX_MBUF_MIN_SIZE;
-	status = ixEthAccPortRxFreeReplenish(portId, mbufRxPtr);
-    }
-    ixOsalIrqUnlock(key);
-
-    return status;
-}
-
-PRIVATE void
-ixEthAccPortDisableRxAndReplenish (IxEthAccPortId portId,
-				   IX_OSAL_MBUF * mBufPtr,
-				   BOOL useMultiBufferCallback)
-{
-    /* call the callback which forwards the traffic to the client */
-    ixEthAccPortDisableRx(portId, mBufPtr, useMultiBufferCallback);
-
-    /* try to replenish with the buffer used in portDisable
-     * if seen in Rx
-     */
-    ixEthAccPortDisableTryReplenish(portId);
-}
-
-PRIVATE void
-ixEthAccPortDisableRxCallback (UINT32 cbTag,
-			       IX_OSAL_MBUF * mBufPtr,
-			       UINT32 learnedPortId)
-{
-    IxEthAccPortId portId = (IxEthAccPortId)cbTag;
-
-    /* call the portDisable receive callback */
-   (ixEthAccPortDisableRxTable[portId])(portId, mBufPtr, FALSE);
-}
-
-PRIVATE void
-ixEthAccPortDisableMultiBufferRxCallback (UINT32 cbTag,
-					  IX_OSAL_MBUF **mBufPtr)
-{
-    IxEthAccPortId portId = (IxEthAccPortId)cbTag;
-
-    while (*mBufPtr)
-    {
-	/* call the portDisable receive callback with one buffer at a time */
-	(ixEthAccPortDisableRxTable[portId])(portId, *mBufPtr++, TRUE);
-    }
-}
-
-IxEthAccStatus
-ixEthAccPortDisablePriv(IxEthAccPortId portId)
-{
-    IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
-    int key;
-    int retry, retryTimeout;
-    volatile IxEthAccPortDisableState *state = &ixEthAccMacState[portId].portDisableState;
-    volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState;
-    volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable port.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* if the state is being set to what it is already at, do nothing */
-    if (!ixEthAccMacState[portId].enabled)
-    {
-        return IX_ETH_ACC_SUCCESS;
-    }
-
-    *state = DISABLED;
-
-    /* disable MAC receive first */
-    ixEthAccPortRxDisablePriv(portId);
-
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-    /* disable ethernet database for this port - It is done now to avoid
-     * issuing ELT maintenance after requesting 'port disable' in an NPE
-     */
-    if (ixEthDBPortDisable(portId) != IX_ETH_DB_SUCCESS)
-    {
-	status = IX_ETH_ACC_FAIL;
-        IX_ETH_ACC_FATAL_LOG("ixEthAccPortDisable: failed to disable EthDB for this port\n", 0, 0, 0, 0, 0, 0);
-    }
-#endif
-
-    /* enter the critical section */
-    key = ixOsalIrqLock();
-
-    /* swap the Rx and TxDone callbacks */
-    ixEthAccPortDisableFn[portId]            = ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn;
-    ixEthAccPortDisableMultiBufferFn[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn;
-    ixEthAccPortDisableCbTag[portId]         = ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag;
-    ixEthAccPortDisableMultiBufferCbTag[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag;
-    ixEthAccPortDisableTxDoneFn[portId]      = ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn;
-    ixEthAccPortDisableTxDoneCbTag[portId]   = ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag;
-    ixEthAccPortDisableRxTable[portId]       =  ixEthAccPortDisableRx;
-
-    /* register temporary callbacks */
-    ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn            = ixEthAccPortDisableRxCallback;
-    ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag           = portId;
-
-    ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = ixEthAccPortDisableMultiBufferRxCallback;
-    ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = portId;
-
-    ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn  = ixEthAccPortDisableTxDone;
-    ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag           = portId;
-
-    /* initialise the Rx state and Tx states */
-    *txState = TRANSMIT_DONE;
-    *rxState = RECEIVE;
-
-    /* exit the critical section */
-    ixOsalIrqUnlock(key);
-
-    /* enable a NPE loopback */
-    if (ixEthAccNpeLoopbackEnablePriv(portId) != IX_ETH_ACC_SUCCESS)
-    {
-	status = IX_ETH_ACC_FAIL;
-    }
-
-    if (status == IX_ETH_ACC_SUCCESS)
-    {
-	retry = 0;
-
-	/* Step 1 : Drain Tx traffic and TxDone queues :
-	 *
-	 * Transmit and replenish at least once with the
-	 * special buffers until both of them are seen
-	 * in the callback hook
-	 *
-	 * (the receive callback keeps replenishing, so once we see
-	 * the special Tx buffer, we can be sure that Tx drain is complete)
-	 */
-	ixEthAccPortDisableRxTable[portId]
-	    =  ixEthAccPortDisableRxAndReplenish;
-	ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn
-	    = ixEthAccPortDisableTxDone;
-
-	do
-	{
-	    /* keep replenishing */
-	    status = ixEthAccPortDisableTryReplenish(portId);
-	    if (status == IX_ETH_ACC_SUCCESS)
-	    {
-		/* keep transmitting */
-		status = ixEthAccPortDisableTryTransmit(portId);
-	    }
-	    if (status == IX_ETH_ACC_SUCCESS)
-	    {
-		/* wait for some traffic being processed */
-		ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS);
-	    }
-	}
-	while ((status == IX_ETH_ACC_SUCCESS)
-	       && (retry++ < IX_ETH_ACC_MAX_RETRY)
-	       && (*txState == TRANSMIT));
-
-	/* Step 2 : Drain Rx traffic, RxFree and Rx queues :
-	 *
-	 * Transmit and replenish at least once with the
-	 * special buffers until both of them are seen
-	 * in the callback hook
-	 * (the transmit callback keeps transmitting, and when we see
-	 * the special Rx buffer, we can be sure that rxFree drain
-	 * is complete)
-	 *
-	 * The nested loop helps to retry if the user was keeping
-	 * replenishing or transmitting during portDisable.
-	 *
-	 * The 2 nested loops ensure more retries if user traffic is
-	 * seen during portDisable : the user should not replenish
-	 * or transmit while portDisable is running. However, because of
-	 * the queueing possibilities in ethAcc dataplane, it is possible
-	 * that a lot of traffic is left in the queues (e.g. when
-	 * transmitting over a low speed link) and therefore, more
-	 * retries are allowed to help flushing the buffers out.
-	 */
-	ixEthAccPortDisableRxTable[portId]
-	    =  ixEthAccPortDisableRx;
-	ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn
-	    = ixEthAccPortDisableTxDoneAndSubmit;
-
-	do
-	{
-	    do
-	    {
-		ixEthAccPortDisableUserBufferCount[portId] = 0;
-
-		/* keep replenishing */
-		status = ixEthAccPortDisableTryReplenish(portId);
-		if (status == IX_ETH_ACC_SUCCESS)
-		{
-		    /* keep transmitting */
-		    status = ixEthAccPortDisableTryTransmit(portId);
-		}
-		if (status == IX_ETH_ACC_SUCCESS)
-		{
-		    /* wait for some traffic being processed */
-		    ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS);
-		}
-	    }
-	    while ((status == IX_ETH_ACC_SUCCESS)
-		   && (retry++ < IX_ETH_ACC_MAX_RETRY)
-		   && ((ixEthAccPortDisableUserBufferCount[portId] != 0)
-		       || (*rxState == REPLENISH)));
-
-	    /* After the first iteration, change the receive callbacks,
-	     * to process only 1 buffer at a time
-	     */
-	    ixEthAccPortDisableRxTable[portId]
-		= ixEthAccPortDisableRx;
-	    ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn
-		= ixEthAccPortDisableTxDone;
-
-	    /* repeat the whole process while user traffic is seen in TxDone
-	     *
-	     * The conditions to stop the loop are
-	     * - Xscale has both Rx and Tx special buffers
-	     *   (txState = transmit, rxState = receive)
-	     * - any error in txSubmit or rxReplenish
-	     * - no user traffic seen
-	     * - an excessive amount of retries
-	     */
-	}
-	while ((status == IX_ETH_ACC_SUCCESS)
-	       && (retry < IX_ETH_ACC_MAX_RETRY)
-	       && (*txState == TRANSMIT));
-
-	/* check the loop exit conditions. The NPE should not hold
-	 * the special buffers.
-	 */
-	if ((*rxState == REPLENISH) || (*txState == TRANSMIT))
-	{
-	    status = IX_ETH_ACC_FAIL;
-	}
-
-	if (status == IX_ETH_ACC_SUCCESS)
-	{
-	    /* Step 3 : Replenish without transmitting until a timeout
-	     * occurs, in order to drain the internal NPE fifos
-	     *
-	     * we can expect a few frames srill held
-	     * in the NPE.
-	     *
-	     * The 2 nested loops take care about the NPE dropping traffic
-	     * (including loopback traffic) when the Rx queue is full.
-	     *
-	     * The timeout value is very conservative
-	     * since the loopback used keeps replenishhing.
-	     *
-	     */
-	    do
-	    {
-		ixEthAccPortDisableRxTable[portId] = ixEthAccPortDisableRxAndReplenish;
-		ixEthAccPortDisableUserBufferCount[portId] = 0;
-		retryTimeout = 0;
-		do
-		{
-		    /* keep replenishing */
-		    status = ixEthAccPortDisableTryReplenish(portId);
-		    if (status == IX_ETH_ACC_SUCCESS)
-		    {
-			/* wait for some traffic being processed */
-			ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS);
-		    }
-		}
-		while ((status == IX_ETH_ACC_SUCCESS)
-		       && (retryTimeout++ < IX_ETH_ACC_MAX_RETRY_TIMEOUT));
-
-		/* Step 4 : Transmit once. Stop replenish
-		 *
-		 * After the Rx timeout, we are sure that the NPE does not
-		 * hold any frame in its internal NPE fifos.
-		 *
-		 * At this point, the NPE still holds the last rxFree buffer.
-		 * By transmitting a single frame, this should unblock the
-		 * last rxFree buffer. This code just transmit once and
-		 * wait for both frames seen in TxDone and in rxFree.
-		 *
-		 */
-		ixEthAccPortDisableRxTable[portId] =  ixEthAccPortDisableRx;
-		status = ixEthAccPortDisableTryTransmit(portId);
-
-		/* the NPE should immediatelyt release
-		 * the last Rx buffer and the last transmitted buffer
-		 * unless the last Tx frame was dropped (rx queue full)
-		 */
-		if (status == IX_ETH_ACC_SUCCESS)
-		{
-		    retryTimeout = 0;
-		    do
-		    {
-			ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS);
-		    }
-		    while ((*rxState == REPLENISH)
-			   && (retryTimeout++ < IX_ETH_ACC_MAX_RETRY_TIMEOUT));
-		}
-
-		/* the NPE may have dropped the traffic because of Rx
-		 * queue being full. This code ensures that the last
-		 * Tx and Rx frames are both received.
-		 */
-	    }
-	    while ((status == IX_ETH_ACC_SUCCESS)
-		   && (retry++ < IX_ETH_ACC_MAX_RETRY)
-		   && ((*txState == TRANSMIT)
-		       || (*rxState == REPLENISH)
-		       || (ixEthAccPortDisableUserBufferCount[portId] != 0)));
-
-	    /* Step 5 : check the final states : the NPE has
-	     * no buffer left, nor in Tx , nor in Rx directions.
-	     */
-	    if ((*rxState == REPLENISH) || (*txState == TRANSMIT))
-	    {
-		status = IX_ETH_ACC_FAIL;
-	    }
-	}
-
-        /* now all the buffers are drained, disable NPE loopback
-	 * This is done regardless of the logic to drain the queues and
-	 * the internal buffers held by the NPE.
-	 */
-	if (ixEthAccNpeLoopbackDisablePriv(portId) != IX_ETH_ACC_SUCCESS)
-	{
-	    status = IX_ETH_ACC_FAIL;
-	}
-    }
-
-    /* disable MAC Tx and Rx services */
-    ixEthAccMacState[portId].enabled = FALSE;
-    ixEthAccMacStateUpdate(portId);
-
-    /* restore the Rx and TxDone callbacks (within a critical section) */
-    key = ixOsalIrqLock();
-
-    ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn            = ixEthAccPortDisableFn[portId];
-    ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag           = ixEthAccPortDisableCbTag[portId];
-    ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = ixEthAccPortDisableMultiBufferFn[portId];
-    ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = ixEthAccPortDisableMultiBufferCbTag[portId];
-    ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn  = ixEthAccPortDisableTxDoneFn[portId];
-    ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag           = ixEthAccPortDisableTxDoneCbTag[portId];
-
-    ixOsalIrqUnlock(key);
-
-    /* the MAC core rx/tx disable may left the MAC hardware in an
-     * unpredictable state. A hw reset is executed before resetting
-     * all the MAC parameters to a known value.
-     */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_CORE_CNTRL,
-	      IX_ETH_ACC_CORE_RESET);
-
-    ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY);
-
-    /* rewrite all parameters to their current value */
-    ixEthAccMacStateUpdate(portId);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH,
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_CORE_CNTRL,
-	      IX_ETH_ACC_CORE_MDC_EN);
-
-    return status;
-}
-
-IxEthAccStatus
-ixEthAccPortEnabledQueryPriv(IxEthAccPortId portId, BOOL *enabled)
-{
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable port.\n",(INT32)portId,0,0,0,0,0);
-
-        /* Since Eth NPE is not available, port must be disabled */
-        *enabled = FALSE ;
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-        /* Since Eth NPE is not available, port must be disabled */
-        *enabled = FALSE ;
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    *enabled = ixEthAccMacState[portId].enabled;
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortMacResetPriv(IxEthAccPortId portId)
-{
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot reset Ethernet coprocessor.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_CORE_CNTRL,
-	      IX_ETH_ACC_CORE_RESET);
-
-    ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY);
-
-    /* rewrite all parameters to their current value */
-    ixEthAccMacStateUpdate(portId);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH,
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_CORE_CNTRL,
-	      IX_ETH_ACC_CORE_MDC_EN);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortLoopbackEnable(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable loopback.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* read register */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    /* update register */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      regval | IX_ETH_ACC_RX_CNTRL1_LOOP_EN);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-PRIVATE void
-ixEthAccNpeLoopbackMessageCallback (IxNpeMhNpeId npeId,
-				    IxNpeMhMessage msg)
-{
-    IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId);
-
-#ifndef NDEBUG
-    /* Prudent to at least check the port is within range */
-    if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS)
-    {
-	IX_ETH_ACC_FATAL_LOG("IXETHACC:ixEthAccPortDisableMessageCallback: Illegal port: %u\n",
-            (UINT32) portId, 0, 0, 0, 0, 0);
-
-	return;
-    }
-#endif
-
-    /* unlock message reception mutex */
-    ixOsalMutexUnlock(&ixEthAccMacState[portId].npeLoopbackMessageLock);
-}
-
-IxEthAccStatus
-ixEthAccNpeLoopbackEnablePriv(IxEthAccPortId portId)
-{
-    IX_STATUS npeMhStatus;
-    IxNpeMhMessage message;
-    IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable NPE loopback.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* enable NPE loopback (lsb of the message contains the value 1) */
-    message.data[0] = (IX_ETHNPE_SETLOOPBACK_MODE << IX_ETH_ACC_MAC_MSGID_SHL)
-	| 0x01;
-    message.data[1] = 0;
-
-    npeMhStatus = ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId),
-		message,
-		IX_ETHNPE_SETLOOPBACK_MODE_ACK,
-		ixEthAccNpeLoopbackMessageCallback,
-		IX_NPEMH_SEND_RETRIES_DEFAULT);
-
-    if (npeMhStatus != IX_SUCCESS)
-    {
-        status = IX_ETH_ACC_FAIL;
-    }
-    else
-    {
-	/* wait for NPE loopbackEnable response */
-        if (ixOsalMutexLock(&ixEthAccMacState[portId]. npeLoopbackMessageLock,
-			    IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS)
-	    != IX_SUCCESS)
-        {
-            status = IX_ETH_ACC_FAIL;
-        }
-    }
-
-    return status;
-}
-
-IxEthAccStatus
-ixEthAccPortTxEnablePriv(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable TX.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* read register */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    /* update register */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      regval | IX_ETH_ACC_TX_CNTRL1_TX_EN);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortRxEnablePriv(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable RX.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* read register */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    /* update register */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      regval | IX_ETH_ACC_RX_CNTRL1_RX_EN);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortLoopbackDisable(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable loopback.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /*disable MAC loopabck */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      (regval & ~IX_ETH_ACC_RX_CNTRL1_LOOP_EN));
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccNpeLoopbackDisablePriv(IxEthAccPortId portId)
-{
-    IX_STATUS npeMhStatus;
-    IxNpeMhMessage message;
-    IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable NPE loopback.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* disable NPE loopback (lsb of the message contains the value 0) */
-    message.data[0] = (IX_ETHNPE_SETLOOPBACK_MODE << IX_ETH_ACC_MAC_MSGID_SHL);
-    message.data[1] = 0;
-
-    npeMhStatus = ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId),
-		message,
-		IX_ETHNPE_SETLOOPBACK_MODE_ACK,
-		ixEthAccNpeLoopbackMessageCallback,
-		IX_NPEMH_SEND_RETRIES_DEFAULT);
-
-    if (npeMhStatus != IX_SUCCESS)
-    {
-        status = IX_ETH_ACC_FAIL;
-    }
-    else
-    {
-	/* wait for NPE loopbackEnable response */
-        if (ixOsalMutexLock(&ixEthAccMacState[portId].npeLoopbackMessageLock,
-			    IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS)
-	    != IX_SUCCESS)
-        {
-            status = IX_ETH_ACC_FAIL;
-        }
-    }
-
-    return status;
-}
-
-IxEthAccStatus
-ixEthAccPortTxDisablePriv(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable TX.\n", (INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* read register */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    /* update register */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      (regval & ~IX_ETH_ACC_TX_CNTRL1_TX_EN));
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortRxDisablePriv(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable RX.\n", (INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* read register */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    /* update register */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      (regval & ~IX_ETH_ACC_RX_CNTRL1_RX_EN));
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortPromiscuousModeClearPriv(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot clear promiscuous mode.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /*set bit 5 of Rx control 1 - enable address filtering*/
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN);
-
-    ixEthAccMacState[portId].promiscuous = FALSE;
-
-    ixEthAccMulticastAddressSet(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortPromiscuousModeSetPriv(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set promiscuous mode.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /*
-     * Set bit 5 of Rx control 1 - We enable address filtering even in
-     * promiscuous mode because we want the MAC to set the appropriate
-     * bits in m_flags which doesn't happen if we turn off filtering.
-     */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN);
-
-    ixEthAccMacState[portId].promiscuous = TRUE;
-
-    ixEthAccMulticastAddressSet(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortUnicastMacAddressSetPriv (IxEthAccPortId portId,
-				  IxEthAccMacAddr *macAddr)
-{
-    UINT32 i;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set Unicast Mac Address.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-
-    if (macAddr == NULL)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    if ( macAddr->macAddress[0] & IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT )
-    {
-	/* This is a multicast/broadcast address cant set it ! */
-	return IX_ETH_ACC_FAIL;
-    }
-
-    if ( macAddr->macAddress[0] == 0 &&
-	 macAddr->macAddress[1] == 0 &&
-	 macAddr->macAddress[2] == 0 &&
-	 macAddr->macAddress[3] == 0 &&
-	 macAddr->macAddress[4] == 0 &&
-	 macAddr->macAddress[5] == 0  )
-    {
-	/* This is an invalid mac address cant set it ! */
-	return IX_ETH_ACC_FAIL;
-    }
-
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-    /* update the MAC address in the ethernet database */
-    if (ixEthDBPortAddressSet(portId, (IxEthDBMacAddr *) macAddr) != IX_ETH_DB_SUCCESS)
-    {
-        return IX_ETH_ACC_FAIL;
-    }
-#endif
-
-    /*Set the Unicast MAC to the specified value*/
-    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-    {
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_UNI_ADDR_1 + i*sizeof(UINT32),
-		  macAddr->macAddress[i]);
-    }
-    ixEthAccMacState[portId].initDone = TRUE;
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortUnicastMacAddressGetPriv (IxEthAccPortId portId,
-				  IxEthAccMacAddr *macAddr)
-{
-    /*Return the current value of the Unicast MAC from h/w
-      for the specified port*/
-    UINT32 i;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get Unicast Mac Address.\n",(INT32)portId,0,0,0,0,0);
-        /* Since Eth Npe is unavailable, return invalid MAC Address = 00:00:00:00:00:00 */
-        for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-        {
-	    macAddr->macAddress[i] = 0;
-        }
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if(!ixEthAccMacState[portId].initDone)
-    {
-	return (IX_ETH_ACC_MAC_UNINITIALIZED);
-    }
-
-    if (macAddr == NULL)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-
-    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-    {
-	REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_UNI_ADDR_1 + i*sizeof(UINT32),
-		 macAddr->macAddress[i]);
-    }
-    return IX_ETH_ACC_SUCCESS;
-}
-
-PRIVATE IxEthAccStatus
-ixEthAccPortMulticastMacAddressGet (IxEthAccPortId portId,
-				    IxEthAccMacAddr *macAddr)
-{
-    /*Return the current value of the Multicast MAC from h/w
-      for the specified port*/
-    UINT32 i;
-
-    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-    {
-
-	REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_ADDR_1 + i*sizeof(UINT32),
-		 macAddr->macAddress[i]);
-    }
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-PRIVATE IxEthAccStatus
-ixEthAccPortMulticastMacFilterGet (IxEthAccPortId portId,
-				   IxEthAccMacAddr *macAddr)
-{
-    /*Return the current value of the Multicast MAC from h/w
-      for the specified port*/
-    UINT32 i;
-
-    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-    {
-
-	REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_ADDR_MASK_1 + i*sizeof(UINT32),
-		 macAddr->macAddress[i]);
-    }
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortMulticastAddressJoinPriv (IxEthAccPortId portId,
-				  IxEthAccMacAddr *macAddr)
-{
-    UINT32 i;
-    IxEthAccMacAddr broadcastAddr = {{0xff,0xff,0xff,0xff,0xff,0xff}};
-
-    /*Check that the port parameter is valid*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot join Multicast Mac Address.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /*Check that the mac address is valid*/
-    if(macAddr == NULL)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /* Check that this is a multicast address */
-    if (!(macAddr->macAddress[0] & IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT))
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /* We don't add the Broadcast address */
-    if(ixEthAccMacEqual(&broadcastAddr, macAddr))
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    for (i = 0;
-	 i<ixEthAccMacState[portId].mcastAddrIndex;
-	 i++)
-    {
-	/*Check if the current entry already match an existing matches*/
-	if(ixEthAccMacEqual(&ixEthAccMacState[portId].mcastAddrsTable[i], macAddr))
-	{
-	    /* Address found in the list and already configured,
-	     * return a success status
-	     */
-	    return IX_ETH_ACC_SUCCESS;
-	}
-    }
-
-    /* check for availability at the end of the current table */
-    if(ixEthAccMacState[portId].mcastAddrIndex >= IX_ETH_ACC_MAX_MULTICAST_ADDRESSES)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /*First add the address to the multicast table for the
-      specified port*/
-    i=ixEthAccMacState[portId].mcastAddrIndex;
-
-    memcpy(&ixEthAccMacState[portId].mcastAddrsTable[i],
-	   &macAddr->macAddress,
-	   IX_IEEE803_MAC_ADDRESS_SIZE);
-
-    /*Increment the index into the table, this must be done here
-     as MulticastAddressSet below needs to know about the latest
-     entry.
-    */
-    ixEthAccMacState[portId].mcastAddrIndex++;
-
-    /*Then calculate the new value to be written to the address and
-      address mask registers*/
-    ixEthAccMulticastAddressSet(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-IxEthAccStatus
-ixEthAccPortMulticastAddressJoinAllPriv (IxEthAccPortId portId)
-{
-    IxEthAccMacAddr mcastMacAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}};
-
-    /*Check that the port parameter is valid*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot join all Multicast Address.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* remove all entries from the database and
-    *  insert a multicast entry
-    */
-    memcpy(&ixEthAccMacState[portId].mcastAddrsTable[0],
-	   &mcastMacAddr.macAddress,
-	   IX_IEEE803_MAC_ADDRESS_SIZE);
-
-    ixEthAccMacState[portId].mcastAddrIndex = 1;
-    ixEthAccMacState[portId].joinAll = TRUE;
-
-    ixEthAccMulticastAddressSet(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortMulticastAddressLeavePriv (IxEthAccPortId portId,
-				   IxEthAccMacAddr *macAddr)
-{
-    UINT32 i;
-    IxEthAccMacAddr mcastMacAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}};
-
-    /*Check that the port parameter is valid*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot leave Multicast Address.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /*Check that the mac address is valid*/
-    if(macAddr == NULL)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-    /* Remove this mac address from the mask for the specified port
-     * we copy down all entries above the blanked entry, and
-     * decrement the index
-     */
-    i=0;
-
-    while(i<ixEthAccMacState[portId].mcastAddrIndex)
-    {
-	/*Check if the current entry matches*/
-	if(ixEthAccMacEqual(&ixEthAccMacState[portId].mcastAddrsTable[i],
-			    macAddr))
-	{
-	    if(ixEthAccMacEqual(macAddr, &mcastMacAddr))
-	    {
-		ixEthAccMacState[portId].joinAll = FALSE;
-	    }
-	    /*Decrement the index into the multicast address table
-	      for the current port*/
-	    ixEthAccMacState[portId].mcastAddrIndex--;
-
-	    /*Copy down all entries above the current entry*/
-	    while(i<ixEthAccMacState[portId].mcastAddrIndex)
-	    {
-		memcpy(&ixEthAccMacState[portId].mcastAddrsTable[i],
-		       &ixEthAccMacState[portId].mcastAddrsTable[i+1],
-		       IX_IEEE803_MAC_ADDRESS_SIZE);
-                i++;
-	    }
-	    /*recalculate the mask and write it to the MAC*/
-	    ixEthAccMulticastAddressSet(portId);
-
-	    return IX_ETH_ACC_SUCCESS;
-	}
-	/* search the next entry */
-	i++;
-    }
-    /* no matching entry found */
-    return IX_ETH_ACC_NO_SUCH_ADDR;
-}
-
-IxEthAccStatus
-ixEthAccPortMulticastAddressLeaveAllPriv (IxEthAccPortId portId)
-{
-    /*Check that the port parameter is valid*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot leave all Multicast Address.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    ixEthAccMacState[portId].mcastAddrIndex = 0;
-    ixEthAccMacState[portId].joinAll = FALSE;
-
-    ixEthAccMulticastAddressSet(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-IxEthAccStatus
-ixEthAccPortUnicastAddressShowPriv (IxEthAccPortId portId)
-{
-    IxEthAccMacAddr macAddr;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot show Unicast Address.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /*Get the MAC (UINICAST) address from hardware*/
-    if(ixEthAccPortUnicastMacAddressGetPriv(portId, &macAddr) != IX_ETH_ACC_SUCCESS)
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: MAC address uninitialised port %u\n",
-			       (INT32)portId,0,0,0,0,0);
-	return IX_ETH_ACC_MAC_UNINITIALIZED;
-    }
-
-    /*print it out*/
-    ixEthAccMacPrint(&macAddr);
-    printf("\n");
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-
-void
-ixEthAccPortMulticastAddressShowPriv(IxEthAccPortId portId)
-{
-    IxEthAccMacAddr macAddr;
-    UINT32 i;
-
-    if(!IX_ETH_ACC_IS_PORT_VALID(portId))
-    {
-        return;
-    }
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot show Multicast Address.\n",(INT32)portId,0,0,0,0,0);
-        return ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return;
-    }
-
-    printf("Multicast MAC: ");
-    /*Get the MAC (MULTICAST) address from hardware*/
-    ixEthAccPortMulticastMacAddressGet(portId, &macAddr);
-    /*print it out*/
-    ixEthAccMacPrint(&macAddr);
-    /*Get the MAC (MULTICAST) filter from hardware*/
-    ixEthAccPortMulticastMacFilterGet(portId, &macAddr);
-    /*print it out*/
-    printf(" ( ");
-    ixEthAccMacPrint(&macAddr);
-    printf(" )\n");
-    printf("Constituent Addresses:\n");
-    for(i=0;i<ixEthAccMacState[portId].mcastAddrIndex;i++)
-    {
-	ixEthAccMacPrint(&ixEthAccMacState[portId].mcastAddrsTable[i]);
-	printf("\n");
-    }
-    return;
-}
-
-/*Set the duplex mode*/
-IxEthAccStatus
-ixEthAccPortDuplexModeSetPriv (IxEthAccPortId portId,
-			   IxEthAccDuplexMode mode)
-{
-    UINT32 txregval;
-    UINT32 rxregval;
-
-    /*This is bit 1 of the transmit control reg, set to 1 for half
-      duplex, 0 for full duplex*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set Duplex Mode.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     txregval);
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     rxregval);
-
-    if (mode ==  IX_ETH_ACC_FULL_DUPLEX)
-    {
-	/*Clear half duplex bit in TX*/
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_TX_CNTRL1,
-		  txregval & ~IX_ETH_ACC_TX_CNTRL1_DUPLEX);
-
-	/*We must set the pause enable in the receive logic when in
-	  full duplex mode*/
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_RX_CNTRL1,
-		  rxregval | IX_ETH_ACC_RX_CNTRL1_PAUSE_EN);
-	ixEthAccMacState[portId].fullDuplex = TRUE;
-
-    }
-    else if (mode ==  IX_ETH_ACC_HALF_DUPLEX)
-    {
-	/*Set half duplex bit in TX*/
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_TX_CNTRL1,
-		  txregval | IX_ETH_ACC_TX_CNTRL1_DUPLEX);
-
-	/*We must clear pause enable in the receive logic when in
-	  half duplex mode*/
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_RX_CNTRL1,
-		  rxregval & ~IX_ETH_ACC_RX_CNTRL1_PAUSE_EN);
-
-	ixEthAccMacState[portId].fullDuplex = FALSE;
-    }
-    else
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-
-    return IX_ETH_ACC_SUCCESS;
-
-}
-
-
-
-IxEthAccStatus
-ixEthAccPortDuplexModeGetPriv (IxEthAccPortId portId,
-			   IxEthAccDuplexMode *mode)
-{
-    /*Return the duplex mode for the specified port*/
-    UINT32 regval;
-
-    /*This is bit 1 of the transmit control reg, set to 1 for half
-      duplex, 0 for full duplex*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get Duplex Mode.\n",(INT32)portId,0,0,0,0,0);
-        /* return hald duplex */
-        *mode = IX_ETH_ACC_HALF_DUPLEX ;
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    if (mode == NULL)
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    if( regval & IX_ETH_ACC_TX_CNTRL1_DUPLEX)
-    {
-	*mode = IX_ETH_ACC_HALF_DUPLEX;
-    }
-    else
-    {
-	*mode = IX_ETH_ACC_FULL_DUPLEX;
-    }
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-
-IxEthAccStatus
-ixEthAccPortTxFrameAppendPaddingEnablePriv (IxEthAccPortId portId)
-{
-    UINT32 regval;
-    /*Enable FCS computation by the MAC and appending to the
-      frame*/
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable Tx Frame Append Padding.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      regval |
-	      IX_ETH_ACC_TX_CNTRL1_PAD_EN);
-
-    ixEthAccMacState[portId].txPADAppend = TRUE;
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortTxFrameAppendPaddingDisablePriv (IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /*disable FCS computation and appending*/
-    /*Set bit 4 of Tx control register one to zero*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disble Tx Frame Append Padding.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      regval & ~IX_ETH_ACC_TX_CNTRL1_PAD_EN);
-
-    ixEthAccMacState[portId].txPADAppend = FALSE;
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortTxFrameAppendFCSEnablePriv (IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /*Enable FCS computation by the MAC and appending to the
-      frame*/
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable Tx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      regval | IX_ETH_ACC_TX_CNTRL1_FCS_EN);
-
-    ixEthAccMacState[portId].txFCSAppend = TRUE;
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortTxFrameAppendFCSDisablePriv (IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /*disable FCS computation and appending*/
-    /*Set bit 4 of Tx control register one to zero*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable Tx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      regval & ~IX_ETH_ACC_TX_CNTRL1_FCS_EN);
-
-    ixEthAccMacState[portId].txFCSAppend = FALSE;
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortRxFrameAppendFCSEnablePriv (IxEthAccPortId portId)
-{
-    /*Set bit 2 of Rx control 1*/
-    UINT32 regval;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable Rx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      regval | IX_ETH_ACC_RX_CNTRL1_CRC_EN);
-
-    ixEthAccMacState[portId].rxFCSAppend = TRUE;
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortRxFrameAppendFCSDisablePriv (IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /*Clear bit 2 of Rx control 1*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable Rx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      regval & ~IX_ETH_ACC_RX_CNTRL1_CRC_EN);
-
-    ixEthAccMacState[portId].rxFCSAppend = FALSE;
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-
-PRIVATE void
-ixEthAccMacNpeStatsMessageCallback (IxNpeMhNpeId npeId,
-				    IxNpeMhMessage msg)
-{
-    IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId);
-
-#ifndef NDEBUG
-    /* Prudent to at least check the port is within range */
-    if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS)
-    {
-	IX_ETH_ACC_FATAL_LOG(
-     "IXETHACC:ixEthAccMacNpeStatsMessageCallback: Illegal port: %u\n",
-     (UINT32)portId, 0, 0, 0, 0, 0);
-	return;
-    }
-#endif
-
-    /*Unblock Stats Get call*/
-    ixOsalMutexUnlock(&ixEthAccMacState[portId].ackMIBStatsLock);
-
-}
-
-PRIVATE void
-ixEthAccMibIIStatsEndianConvert (IxEthEthObjStats *retStats)
-{
-    /* endianness conversion */
-
-    /* Rx stats */
-    retStats->dot3StatsAlignmentErrors =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsAlignmentErrors);
-    retStats->dot3StatsFCSErrors =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsFCSErrors);
-    retStats->dot3StatsInternalMacReceiveErrors =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsInternalMacReceiveErrors);
-    retStats->RxOverrunDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxOverrunDiscards);
-    retStats->RxLearnedEntryDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxLearnedEntryDiscards);
-    retStats->RxLargeFramesDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxLargeFramesDiscards);
-    retStats->RxSTPBlockedDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxSTPBlockedDiscards);
-    retStats->RxVLANTypeFilterDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxVLANTypeFilterDiscards);
-    retStats->RxVLANIdFilterDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxVLANIdFilterDiscards);
-    retStats->RxInvalidSourceDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxInvalidSourceDiscards);
-    retStats->RxBlackListDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxBlackListDiscards);
-    retStats->RxWhiteListDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxWhiteListDiscards);
-    retStats->RxUnderflowEntryDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxUnderflowEntryDiscards);
-
-    /* Tx stats */
-    retStats->dot3StatsSingleCollisionFrames =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsSingleCollisionFrames);
-    retStats->dot3StatsMultipleCollisionFrames =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsMultipleCollisionFrames);
-    retStats->dot3StatsDeferredTransmissions =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsDeferredTransmissions);
-    retStats->dot3StatsLateCollisions =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsLateCollisions);
-    retStats->dot3StatsExcessiveCollsions =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsExcessiveCollsions);
-    retStats->dot3StatsInternalMacTransmitErrors =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsInternalMacTransmitErrors);
-    retStats->dot3StatsCarrierSenseErrors =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsCarrierSenseErrors);
-    retStats->TxLargeFrameDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->TxLargeFrameDiscards);
-    retStats->TxVLANIdFilterDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->TxVLANIdFilterDiscards);
-}
-
-IxEthAccStatus
-ixEthAccMibIIStatsGet (IxEthAccPortId portId,
-		       IxEthEthObjStats *retStats )
-{
-    IxNpeMhMessage message;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGet (Mac) EthAcc service is not initialized\n");
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (retStats == NULL)
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGet (Mac) NULL argument\n");
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGet (Mac) NPE for port %d is not available\n", portId);
-
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get MIB II Stats.\n",(INT32)portId,0,0,0,0,0);
-
-        /* Return all zero stats */
-        IX_ETH_ACC_MEMSET(retStats, 0, sizeof(IxEthEthObjStats));
-
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGet (Mac) port %d is not initialized\n", portId);
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    IX_OSAL_CACHE_INVALIDATE(retStats, sizeof(IxEthEthObjStats));
-
-    message.data[0] = IX_ETHNPE_GETSTATS << IX_ETH_ACC_MAC_MSGID_SHL;
-    message.data[1] = (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS(retStats);
-
-    /* Permit only one task to request MIB statistics Get operation
-       at a time */
-    ixOsalMutexLock(&ixEthAccMacState[portId].MIBStatsGetAccessLock, IX_OSAL_WAIT_FOREVER);
-
-    if(ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId),
-				      message,
-				      IX_ETHNPE_GETSTATS,
-				      ixEthAccMacNpeStatsMessageCallback,
-				      IX_NPEMH_SEND_RETRIES_DEFAULT)
-       != IX_SUCCESS)
-    {
-	ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetAccessLock);
-
-        printf("EthAcc: (Mac) StatsGet failed to send NPE message\n");
-
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /* Wait for callback invocation indicating response to
-       this request - we need this mutex in order to ensure
-       that the return from this function is synchronous */
-    ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsLock, IX_ETH_ACC_MIB_STATS_DELAY_MSECS);
-
-    /* Permit other tasks to perform MIB statistics Get operation */
-    ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetAccessLock);
-
-    ixEthAccMibIIStatsEndianConvert (retStats);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-PRIVATE void
-ixEthAccMacNpeStatsResetMessageCallback (IxNpeMhNpeId npeId,
-					 IxNpeMhMessage msg)
-{
-    IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId);
-
-#ifndef NDEBUG
-    /* Prudent to at least check the port is within range */
-    if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS)
-    {
-	IX_ETH_ACC_FATAL_LOG(
-     "IXETHACC:ixEthAccMacNpeStatsResetMessageCallback: Illegal port: %u\n",
-     (UINT32)portId, 0, 0, 0, 0, 0);
-	return;
-    }
-#endif
-
-    /*Unblock Stats Get & reset call*/
-    ixOsalMutexUnlock(&ixEthAccMacState[portId].ackMIBStatsResetLock);
-
-}
-
-
-
-IxEthAccStatus
-ixEthAccMibIIStatsGetClear (IxEthAccPortId portId,
-			    IxEthEthObjStats *retStats)
-{
-    IxNpeMhMessage message;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) EthAcc service is not initialized\n");
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (retStats == NULL)
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) NULL argument\n");
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) NPE for port %d is not available\n", portId);
-
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get and clear MIB II Stats.\n", (INT32)portId, 0, 0, 0, 0, 0);
-
-        /* Return all zero stats */
-        IX_ETH_ACC_MEMSET(retStats, 0, sizeof(IxEthEthObjStats));
-
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) port %d is not initialized\n", portId);
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    IX_OSAL_CACHE_INVALIDATE(retStats, sizeof(IxEthEthObjStats));
-
-    message.data[0] = IX_ETHNPE_RESETSTATS << IX_ETH_ACC_MAC_MSGID_SHL;
-    message.data[1] = (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS(retStats);
-
-    /* Permit only one task to request MIB statistics Get-Reset operation at a time */
-    ixOsalMutexLock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock, IX_OSAL_WAIT_FOREVER);
-
-    if(ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId),
-				      message,
-				      IX_ETHNPE_RESETSTATS,
-				      ixEthAccMacNpeStatsResetMessageCallback,
-				      IX_NPEMH_SEND_RETRIES_DEFAULT)
-       != IX_SUCCESS)
-    {
-	ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock);
-
-        printf("EthAcc: (Mac) ixEthAccMibIIStatsGetClear failed to send NPE message\n");
-
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /* Wait for callback invocation indicating response to this request */
-    ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsResetLock, IX_ETH_ACC_MIB_STATS_DELAY_MSECS);
-
-    /* permit other tasks to get and reset MIB stats*/
-    ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock);
-
-    ixEthAccMibIIStatsEndianConvert(retStats);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccMibIIStatsClear (IxEthAccPortId portId)
-{
-    static IxEthEthObjStats retStats;
-    IxEthAccStatus status;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot clear MIB II Stats.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    /* there is no reset operation without a corresponding Get */
-    status = ixEthAccMibIIStatsGetClear(portId, &retStats);
-
-    return status;
-}
-
-/* Initialize the ethernet MAC settings */
-IxEthAccStatus
-ixEthAccMacInit(IxEthAccPortId portId)
-{
-    IX_OSAL_MBUF_POOL* portDisablePool;
-    UINT8 *data;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot initialize Mac.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if(ixEthAccMacState[portId].macInitialised == FALSE)
-    {
-	ixEthAccMacState[portId].fullDuplex  = TRUE;
-	ixEthAccMacState[portId].rxFCSAppend = TRUE;
-	ixEthAccMacState[portId].txFCSAppend = TRUE;
-	ixEthAccMacState[portId].txPADAppend = TRUE;
-	ixEthAccMacState[portId].enabled     = FALSE;
-	ixEthAccMacState[portId].promiscuous = TRUE;
-	ixEthAccMacState[portId].joinAll     = FALSE;
-	ixEthAccMacState[portId].initDone    = FALSE;
-	ixEthAccMacState[portId].macInitialised = TRUE;
-
-        /* initialize MIB stats mutexes */
-        ixOsalMutexInit(&ixEthAccMacState[portId].ackMIBStatsLock);
-        ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsLock, IX_OSAL_WAIT_FOREVER);
-
-        ixOsalMutexInit(&ixEthAccMacState[portId].ackMIBStatsResetLock);
-        ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsResetLock, IX_OSAL_WAIT_FOREVER);
-
-        ixOsalMutexInit(&ixEthAccMacState[portId].MIBStatsGetAccessLock);
-
-        ixOsalMutexInit(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock);
-
-        ixOsalMutexInit(&ixEthAccMacState[portId].npeLoopbackMessageLock);
-
-	ixEthAccMacState[portId].portDisableRxMbufPtr = NULL;
-        ixEthAccMacState[portId].portDisableTxMbufPtr = NULL;
-
-	portDisablePool = IX_OSAL_MBUF_POOL_INIT(2,
-			  IX_ETHACC_RX_MBUF_MIN_SIZE,
-			  "portDisable Pool");
-
-        IX_OSAL_ENSURE(portDisablePool != NULL, "Failed to initialize PortDisable pool");
-
-	ixEthAccMacState[portId].portDisableRxMbufPtr = IX_OSAL_MBUF_POOL_GET(portDisablePool);
-        ixEthAccMacState[portId].portDisableTxMbufPtr = IX_OSAL_MBUF_POOL_GET(portDisablePool);
-
-	IX_OSAL_ENSURE(ixEthAccMacState[portId].portDisableRxMbufPtr != NULL,
-		  "Pool allocation failed");
-        IX_OSAL_ENSURE(ixEthAccMacState[portId].portDisableTxMbufPtr != NULL,
-		  "Pool allocation failed");
-	/* fill the payload of the Rx mbuf used in portDisable */
-        IX_OSAL_MBUF_MLEN(ixEthAccMacState[portId].portDisableRxMbufPtr) = IX_ETHACC_RX_MBUF_MIN_SIZE;
-
-        memset(IX_OSAL_MBUF_MDATA(ixEthAccMacState[portId].portDisableRxMbufPtr),
-	       0xAA,
-	       IX_ETHACC_RX_MBUF_MIN_SIZE);
-
-	/* fill the payload of the Tx mbuf used in portDisable (64 bytes) */
-        IX_OSAL_MBUF_MLEN(ixEthAccMacState[portId].portDisableTxMbufPtr) = 64;
-        IX_OSAL_MBUF_PKT_LEN(ixEthAccMacState[portId].portDisableTxMbufPtr) = 64;
-
-        data = (UINT8 *) IX_OSAL_MBUF_MDATA(ixEthAccMacState[portId].portDisableTxMbufPtr);
-        memset(data, 0xBB, 64);
-        data[0] = 0x00; /* unicast destination MAC address */
-        data[6] = 0x00; /* unicast source MAC address */
-        data[12] = 0x08; /* typelength : IP frame */
-        data[13] = 0x00; /* typelength : IP frame */
-
-	IX_OSAL_CACHE_FLUSH(data, 64);
-    }
-
-    IX_OSAL_ASSERT (ixEthAccMacBase[portId] != 0);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_CORE_CNTRL,
-	      IX_ETH_ACC_CORE_RESET);
-
-    ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_CORE_CNTRL,
-	      IX_ETH_ACC_CORE_MDC_EN);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH,
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT);
-
-    ixEthAccMacStateUpdate(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-/* PRIVATE Functions*/
-
-PRIVATE void
-ixEthAccMacStateUpdate(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    if ( ixEthAccMacState[portId].enabled == FALSE )
-    {
-	/*  Just disable both the transmitter and reciver in the MAC.  */
-        REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_RX_CNTRL1,
-		 regval);
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_RX_CNTRL1,
-		  regval & ~IX_ETH_ACC_RX_CNTRL1_RX_EN);
-
-        REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_TX_CNTRL1,
-		 regval);
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_TX_CNTRL1,
-		  regval & ~IX_ETH_ACC_TX_CNTRL1_TX_EN);
-    }
-
-    if(ixEthAccMacState[portId].fullDuplex)
-    {
-	ixEthAccPortDuplexModeSetPriv (portId, IX_ETH_ACC_FULL_DUPLEX);
-    }
-    else
-    {
-	ixEthAccPortDuplexModeSetPriv (portId, IX_ETH_ACC_HALF_DUPLEX);
-    }
-
-    if(ixEthAccMacState[portId].rxFCSAppend)
-    {
-	ixEthAccPortRxFrameAppendFCSEnablePriv (portId);
-    }
-    else
-    {
-	ixEthAccPortRxFrameAppendFCSDisablePriv (portId);
-    }
-
-    if(ixEthAccMacState[portId].txFCSAppend)
-    {
-	ixEthAccPortTxFrameAppendFCSEnablePriv (portId);
-    }
-    else
-    {
-	ixEthAccPortTxFrameAppendFCSDisablePriv (portId);
-    }
-
-    if(ixEthAccMacState[portId].txPADAppend)
-    {
-	ixEthAccPortTxFrameAppendPaddingEnablePriv (portId);
-    }
-    else
-    {
-	ixEthAccPortTxFrameAppendPaddingDisablePriv (portId);
-    }
-
-    if(ixEthAccMacState[portId].promiscuous)
-    {
-	ixEthAccPortPromiscuousModeSetPriv(portId);
-    }
-    else
-    {
-	ixEthAccPortPromiscuousModeClearPriv(portId);
-    }
-
-    if ( ixEthAccMacState[portId].enabled == TRUE )
-    {
-        /*   Enable both the transmitter and reciver in the MAC.  */
-        REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_RX_CNTRL1,
-		 regval);
-        REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_RX_CNTRL1,
-		  regval | IX_ETH_ACC_RX_CNTRL1_RX_EN);
-
-        REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_TX_CNTRL1,
-		 regval);
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_TX_CNTRL1,
-		  regval | IX_ETH_ACC_TX_CNTRL1_TX_EN);
-    }
-}
-
-
-PRIVATE BOOL
-ixEthAccMacEqual(IxEthAccMacAddr *macAddr1,
-		 IxEthAccMacAddr *macAddr2)
-{
-    UINT32 i;
-    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE; i++)
-    {
-	if(macAddr1->macAddress[i] != macAddr2->macAddress[i])
-	{
-	    return FALSE;
-	}
-    }
-    return TRUE;
-}
-
-PRIVATE void
-ixEthAccMacPrint(IxEthAccMacAddr *m)
-{
-    printf("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x",
-	   m->macAddress[0], m->macAddress[1],
-	   m->macAddress[2], m->macAddress[3],
-	   m->macAddress[4], m->macAddress[5]);
-}
-
-/* Set the multicast address and address mask registers
- *
- * A bit in the address mask register must be set if
- * all multicast addresses always have that bit set, or if
- * all multicast addresses always have that bit cleared.
- *
- * A bit in the address register must be set if all multicast
- * addresses have that bit set, otherwise, it should be cleared
- */
-
-PRIVATE void
-ixEthAccMulticastAddressSet(IxEthAccPortId portId)
-{
-    UINT32 i;
-    UINT32 j;
-    IxEthAccMacAddr addressMask;
-    IxEthAccMacAddr address;
-    IxEthAccMacAddr alwaysClearBits;
-    IxEthAccMacAddr alwaysSetBits;
-
-    /* calculate alwaysClearBits and alwaysSetBits:
-     * alwaysClearBits is calculated by ORing all
-     * multicast addresses, those bits that are always
-     * clear are clear in the result
-     *
-     * alwaysSetBits is calculated by ANDing all
-     * multicast addresses, those bits that are always set
-     * are set in the result
-     */
-
-    if (ixEthAccMacState[portId].promiscuous == TRUE)
-    {
-	/* Promiscuous Mode is set, and filtering
-	 * allow all packets, and enable the mcast and
-	 * bcast detection.
-	 */
-	memset(&addressMask.macAddress,
-	       0,
-	       IX_IEEE803_MAC_ADDRESS_SIZE);
-	memset(&address.macAddress,
-	       0,
-	       IX_IEEE803_MAC_ADDRESS_SIZE);
-    }
-    else
-    {
-	if(ixEthAccMacState[portId].joinAll == TRUE)
-	{
-	    /* Join all is set. The mask and address are
-	     * the multicast settings.
-	     */
-	    IxEthAccMacAddr macAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}};
-
-	    memcpy(addressMask.macAddress,
-		   macAddr.macAddress,
-		   IX_IEEE803_MAC_ADDRESS_SIZE);
-	    memcpy(address.macAddress,
-		   macAddr.macAddress,
-		   IX_IEEE803_MAC_ADDRESS_SIZE);
-	}
-	else if(ixEthAccMacState[portId].mcastAddrIndex == 0)
-	{
-	    /* No entry in the filtering database,
-	     * Promiscuous Mode is cleared, Broadcast filtering
-	     * is configured.
-	     */
-	    memset(addressMask.macAddress,
-		   IX_ETH_ACC_MAC_ALL_BITS_SET,
-		   IX_IEEE803_MAC_ADDRESS_SIZE);
-	    memset(address.macAddress,
-		   IX_ETH_ACC_MAC_ALL_BITS_SET,
-		   IX_IEEE803_MAC_ADDRESS_SIZE);
-	}
-	else
-	{
-	    /* build a mask and an address which mix all entreis
-	     * from the list of multicast addresses
-	     */
-	    memset(alwaysClearBits.macAddress,
-		   0,
-		   IX_IEEE803_MAC_ADDRESS_SIZE);
-	    memset(alwaysSetBits.macAddress,
-		   IX_ETH_ACC_MAC_ALL_BITS_SET,
-		   IX_IEEE803_MAC_ADDRESS_SIZE);
-
-	    for(i=0;i<ixEthAccMacState[portId].mcastAddrIndex;i++)
-	    {
-		for(j=0;j<IX_IEEE803_MAC_ADDRESS_SIZE;j++)
-		{
-		    alwaysClearBits.macAddress[j] |=
-			ixEthAccMacState[portId].mcastAddrsTable[i].macAddress[j];
-		    alwaysSetBits.macAddress[j] &=
-			ixEthAccMacState[portId].mcastAddrsTable[i].macAddress[j];
-		}
-	    }
-
-	    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-	    {
-		addressMask.macAddress[i] = alwaysSetBits.macAddress[i]
-		    | ~alwaysClearBits.macAddress[i];
-		address.macAddress[i] = alwaysSetBits.macAddress[i];
-	    }
-	}
-    }
-
-    /*write the new addr filtering to h/w*/
-    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-    {
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_ADDR_MASK_1+i*sizeof(UINT32),
-		  addressMask.macAddress[i]);
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_ADDR_1+i*sizeof(UINT32),
-		  address.macAddress[i]);
-    }
-}