* Patch by Marc Singer, 29 May 2003:

  Fixed rarp boot method for IA32 and other little-endian CPUs.

* Patch by Marc Singer, 28 May 2003:
  Added port I/O commands.

* Patch by Matthew McClintock, 28 May 2003
  - cpu/mpc824x/start.S: fix relocation code when booting from RAM
  - minor patches for utx8245

* Patch by Daniel Engström, 28 May 2003:
  x86 update

* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
  add nand flash support to SXNI855T configuration
  fix/extend nand flash support:
  - fix 'nand erase' command so does not erase bad blocks
  - fix 'nand write' command so does not write to bad blocks
  - fix nand_probe() so handles no flash detected properly
  - add doc/README.nand
  - add .jffs2 and .oob options to nand read/write
  - add 'nand bad' command to list bad blocks
  - add 'clean' option to 'nand erase' to write JFFS2 clean markers
  - make NAND read/write faster

* Patch by Rune Torgersen, 23 May 2003:
  Update for MPC8266ADS board

1 files changed, 536 insertions, 0 deletions

diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S
new file mode 100644
index 0000000..7a957c7
--- /dev/null
+++ b/cpu/i386/sc520_asm.S
@@ -0,0 +1,536 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This file is largely based on code obtned from AMD. AMD's original
+ * copyright is included below 
+ */
+
+/*
+ *  =============================================================================
+ *                                                                              
+ *   Copyright 1999 Advanced Micro Devices, Inc.                                
+ *                                                                              
+ *  This software is the property of Advanced Micro Devices, Inc  (AMD)  which 
+ *  specifically grants the user the right to modify, use and distribute this 
+ *  software provided this COPYRIGHT NOTICE is not removed or altered.  All 
+ *  other rights are reserved by AMD.                                                       
+ *                                                                             
+ *  THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY 
+ *  OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF 
+ *  THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE.
+ *  IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER
+ *  (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS
+ *  INTERRUPTION, LOSS OF INFORMAITON) ARISING OUT OF THE USE OF OR INABILITY
+ *  TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF
+ *  SUCH DAMAGES.  BECAUSE SOME JURSIDICTIONS PROHIBIT THE EXCLUSION OR
+ *  LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
+ *  LIMITATION MAY NOT APPLY TO YOU.
+ * 
+ *  AMD does not assume any responsibility for any errors that may appear in
+ *  the Materials nor any responsibility to support or update the Materials.
+ *  AMD retains the right to make changes to its test specifications at any
+ *  time, without notice.
+ * 
+ *  So that all may benefit from your experience, please report  any  problems 
+ *  or suggestions about this software back to AMD.  Please include your name, 
+ *  company,  telephone number,  AMD product requiring support and question or 
+ *  problem encountered.                                                       
+ *                                                                             
+ *  Advanced Micro Devices, Inc.         Worldwide support and contact           
+ *  Embedded Processor Division            information available at:               
+ *  Systems Engineering                       epd.support@amd.com
+ *  5204 E. Ben White Blvd.                          -or-
+ *  Austin, TX 78741                http://www.amd.com/html/support/techsup.html
+ *  ============================================================================
+ */
+
+
+/*******************************************************************************
+ *	 AUTHOR      : Buddy Fey - Original. 
+ *******************************************************************************
+ */
+
+
+/*******************************************************************************
+ *       FUNCTIONAL DESCRIPTION:
+ * This routine is called to autodetect the geometry of the DRAM.
+ *
+ * This routine is called to determine the number of column bits for the DRAM
+ * devices in this external bank. This routine assumes that the external bank
+ * has been configured for an 11-bit column and for 4 internal banks. This gives
+ * us the maximum address reach in memory. By writing a test value to the max
+ * address and locating where it aliases to, we can determine the number of valid
+ * column bits.
+ *
+ * This routine is called to determine the number of internal banks each DRAM
+ * device has. The external bank (under test) is configured for maximum reach
+ * with 11-bit columns and 4 internal banks. This routine will write to a max
+ * address (BA1 and BA0 = 1) and then read from an address with BA1=0 to see if
+ * that column is a "don't care". If BA1 does not affect write/read of data,
+ * then this device has only 2 internal banks.
+ *
+ * This routine is called to determine the ending address for this external
+ * bank of SDRAM. We write to a max address with a data value and then disable
+ * row address bits looking for "don't care" locations. Each "don't care" bit
+ * represents a dividing of the maximum density (128M) by 2. By dividing the
+ * maximum of 32 4M chunks in an external bank down by all the "don't care" bits
+ * determined during sizing, we set the proper density.
+ *
+ * WARNINGS.
+ * bp must be preserved because it is used for return linkage.
+ *
+ * EXIT
+ * nothing returned - but the memory subsystem is enabled
+ *******************************************************************************
+ */
+
+#include <config.h>
+#ifdef CONFIG_SC520
+
+.section .text
+.equ            DRCCTL,     0x0fffef010   /* DRAM control register */
+.equ            DRCTMCTL,   0x0fffef012   /* DRAM timing control register */
+.equ            DRCCFG,     0x0fffef014   /* DRAM bank configuration register */
+.equ            DRCBENDADR, 0x0fffef018   /* DRAM bank ending address register */
+.equ            ECCCTL,     0x0fffef020   /* DRAM ECC control register */
+.equ            DBCTL,      0x0fffef040   /* DRAM buffer control register */
+
+.equ            CACHELINESZ, 0x00000010   /* size of our cache line (read buffer) */
+.equ            COL11_ADR,  0x0e001e00    /* 11 col addrs */
+.equ            COL10_ADR,  0x0e000e00    /* 10 col addrs */
+.equ            COL09_ADR,  0x0e000600    /*  9 col addrs */
+.equ            COL08_ADR,  0x0e000200    /*  8 col addrs */
+.equ            ROW14_ADR,  0x0f000000    /* 14 row addrs */
+.equ            ROW13_ADR,  0x07000000    /* 13 row addrs */
+.equ            ROW12_ADR,  0x03000000    /* 12 row addrs */
+.equ            ROW11_ADR,  0x01000000    /* 11 row addrs/also bank switch */
+.equ            ROW10_ADR,  0x00000000    /* 10 row addrs/also bank switch */
+.equ            COL11_DATA, 0x0b0b0b0b    /* 11 col addrs */
+.equ            COL10_DATA, 0x0a0a0a0a    /* 10 col data */
+.equ            COL09_DATA, 0x09090909    /*  9 col data */
+.equ            COL08_DATA, 0x08080808    /*  8 col data */
+.equ            ROW14_DATA, 0x3f3f3f3f    /* 14 row data (MASK) */
+.equ            ROW13_DATA, 0x1f1f1f1f    /* 13 row data (MASK) */
+.equ            ROW12_DATA, 0x0f0f0f0f    /* 12 row data (MASK) */
+.equ            ROW11_DATA, 0x07070707    /* 11 row data/also bank switch (MASK) */
+.equ            ROW10_DATA, 0xaaaaaaaa    /* 10 row data/also bank switch (MASK) */
+
+
+ /*
+  * initialize dram controller registers
+  */
+.globl mem_init
+mem_init: 
+        xorw    %ax,%ax
+        movl    $DBCTL, %edi             
+	movb     %al, (%edi)             /* disable write buffer */
+
+        movl    $ECCCTL, %edi            
+	movb     %al, (%edi)             /* disable ECC */
+
+        movl    $DRCTMCTL, %edi           
+        movb    $0x1E,%al                /* Set SDRAM timing for slowest */
+	movb     %al, (%edi)
+
+ /*
+  * setup loop to do 4 external banks starting with bank 3
+  */
+        movl    $0xff000000,%eax         /* enable last bank and setup */
+        movl    $DRCBENDADR, %edi        /* ending address register */
+	movl     %eax, (%edi)
+
+        movl    $DRCCFG, %edi            /* setup */
+        movw    $0xbbbb,%ax              /* dram config register for  */
+	movw    %ax, (%edi)
+
+ /*
+  * issue a NOP to all DRAMs
+  */
+        movl    $DRCCTL, %edi            /* setup DRAM control register with */
+        movb    $0x1,%al                 /* Disable refresh,disable write buffer */ 
+	movb     %al, (%edi)
+        movl    $CACHELINESZ, %esi       /* just a dummy address to write for */ 
+	movw     %ax, (%esi)
+ /*
+  * delay for 100 usec? 200?
+  * ******this is a cludge for now *************
+  */
+        movw    $100,%cx
+sizdelay: 
+        loop    sizdelay                 /* we need 100 usec here */
+ /***********************************************/
+
+ /*
+  * issue all banks precharge
+  */
+        movb    $0x2,%al                 /* All banks precharge */
+	movb     %al, (%edi)
+	movw     %ax, (%esi)
+
+ /*
+  * issue 2 auto refreshes to all banks 
+  */
+        movb    $0x4,%al                 /* Auto refresh cmd */
+	movb     %al, (%edi)
+        movw    $2,%cx
+refresh1: 
+	movw     %ax, (%esi)
+        loop    refresh1
+
+ /*
+  * issue LOAD MODE REGISTER command
+  */
+        movb    $0x3,%al                 /* Load mode register cmd */
+	movb     %al, (%edi)
+	movw     %ax, (%esi)
+
+ /*
+  * issue 8 more auto refreshes to all banks 
+  */ 
+        movb    $0x4,%al                 /* Auto refresh cmd */
+	movb     %al, (%edi)
+        movw    $8,%cx
+refresh2: 
+	movw     %ax, (%esi)
+        loop    refresh2
+
+ /*
+  * set control register to NORMAL mode 
+  */
+        movb    $0x0,%al                 /* Normal mode value */
+	movb     %al, (%edi)
+
+ /*
+  * size dram starting with external bank 3 moving to external bank 0
+  */
+        movl    $0x3,%ecx                /* start with external bank 3 */
+
+nextbank: 
+
+ /*
+  * write col 11 wrap adr
+  */
+        movl    $COL11_ADR, %esi         /* set address to max col (11) wrap addr */
+        movl    $COL11_DATA, %eax        /* pattern for max supported columns(11) */
+	movl    %eax, (%esi)             /* write max col pattern at max col adr */
+	movl    (%esi), %ebx             /* optional read */
+        cmpl    %ebx,%eax                /* to verify write */
+        jnz     bad_ram                  /* this ram is bad */
+ /*
+  * write col 10 wrap adr
+  */
+
+        movl    $COL10_ADR, %esi         /* set address to 10 col wrap address */
+        movl    $COL10_DATA, %eax        /* pattern for 10 col wrap */
+	movl    %eax, (%esi)             /* write 10 col pattern @ 10 col wrap adr */
+	movl    (%esi), %ebx             /* optional read */
+        cmpl    %ebx,%eax                /* to verify write */
+        jnz     bad_ram                  /* this ram is bad */
+ /*
+  * write col 9 wrap adr
+  */
+        movl    $COL09_ADR, %esi         /* set address to 9 col wrap address */
+        movl    $COL09_DATA, %eax        /* pattern for 9 col wrap */
+	movl    %eax, (%esi)             /* write 9 col pattern @ 9 col wrap adr */
+	movl    (%esi), %ebx             /* optional read */
+        cmpl    %ebx,%eax                /* to verify write */
+        jnz     bad_ram                  /* this ram is bad */
+ /*
+  * write col 8 wrap adr
+  */
+        movl    $COL08_ADR, %esi         /* set address to min(8) col wrap address */
+        movl    $COL08_DATA, %eax        /* pattern for min (8) col wrap */
+	movl    %eax, (%esi)             /* write min col pattern @ min col adr */
+	movl    (%esi), %ebx             /* optional read */
+        cmpl    %ebx,%eax                /* to verify write */
+        jnz     bad_ram                  /* this ram is bad */
+ /*
+  * write row 14 wrap adr
+  */
+        movl    $ROW14_ADR, %esi         /* set address to max row (14) wrap addr */
+        movl    $ROW14_DATA, %eax        /* pattern for max supported rows(14) */
+	movl    %eax, (%esi)             /* write max row pattern at max row adr */
+	movl    (%esi), %ebx             /* optional read */
+        cmpl    %ebx,%eax                /* to verify write */
+        jnz     bad_ram                  /* this ram is bad */
+ /*
+  * write row 13 wrap adr
+  */
+        movl    $ROW13_ADR, %esi         /* set address to 13 row wrap address */
+        movl    $ROW13_DATA, %eax        /* pattern for 13 row wrap */
+	movl    %eax, (%esi)             /* write 13 row pattern @ 13 row wrap adr */
+	movl    (%esi), %ebx             /* optional read */
+        cmpl    %ebx,%eax                /* to verify write */
+        jnz     bad_ram                  /* this ram is bad */
+ /*
+  * write row 12 wrap adr
+  */
+        movl    $ROW12_ADR, %esi         /* set address to 12 row wrap address */
+        movl    $ROW12_DATA, %eax        /* pattern for 12 row wrap */
+	movl    %eax, (%esi)             /* write 12 row pattern @ 12 row wrap adr */
+	movl    (%esi), %ebx             /* optional read */
+        cmpl    %ebx,%eax                /* to verify write */
+        jnz     bad_ram                  /* this ram is bad */
+ /*
+  * write row 11 wrap adr
+  */
+        movl    $ROW11_ADR, %edi         /* set address to 11 row wrap address */
+        movl    $ROW11_DATA, %eax        /* pattern for 11 row wrap */
+	movl    %eax, (%edi)             /* write 11 row pattern @ 11 row wrap adr */
+	movl    (%edi), %ebx             /* optional read */
+        cmpl    %ebx,%eax                /* to verify write */
+        jnz     bad_ram                  /* this ram is bad */
+ /*
+  * write row 10 wrap adr --- this write is really to determine number of banks
+  */
+        movl    $ROW10_ADR, %edi         /* set address to 10 row wrap address */
+        movl    $ROW10_DATA, %eax        /* pattern for 10 row wrap (AA) */
+	movl    %eax, (%edi)             /* write 10 row pattern @ 10 row wrap adr */
+	movl    (%edi), %ebx             /* optional read */
+        cmpl    %ebx,%eax                /* to verify write */
+        jnz     bad_ram                  /* this ram is bad */
+ /*
+  * read data @ row 12 wrap adr to determine  * banks, 
+  * and read data @ row 14 wrap adr to determine  * rows.
+  * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
+  * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4 
+  * if data @ row 12 wrap == 11 or 12, we have 4 banks,
+  */
+        xorw    %di,%di                  /* value for 2 banks in DI */
+	movl    (%esi), %ebx             /* read from 12 row wrap to check banks 
+                                          * (esi is setup from the write to row 12 wrap) */
+        cmpl    %ebx,%eax                /* check for AA pattern  (eax holds the aa pattern) */
+        jz      only2                    /* if pattern == AA, we only have 2 banks */
+
+	/* 4 banks */
+	
+        movw    $8,%di                   /* value for 4 banks in DI (BNK_CNT bit) */
+        cmpl    $ROW11_DATA, %ebx        /* only other legitimate values are 11 */
+        jz      only2
+        cmpl    $ROW12_DATA, %ebx        /* and 12 */
+        jnz     bad_ram                  /* its bad if not 11 or 12! */
+	
+	/* fall through */
+only2: 
+ /*
+  * validate row mask
+  */
+        movl    $ROW14_ADR, %esi         /* set address back to max row wrap addr */
+	movl    (%esi), %eax             /* read actual number of rows @ row14 adr */
+
+        cmpl    $ROW11_DATA, %eax        /* row must be greater than 11 pattern */
+        jb      bad_ram
+
+        cmpl    $ROW14_DATA, %eax        /* and row must be less than 14 pattern */
+        ja      bad_ram
+
+        cmpb    %ah,%al                  /* verify all 4 bytes of dword same */
+        jnz     bad_ram
+        movl    %eax,%ebx
+        shrl    $16,%ebx
+        cmpw    %bx,%ax
+        jnz     bad_ram
+ /*
+  * read col 11 wrap adr for real column data value
+  */
+        movl    $COL11_ADR, %esi         /* set address to max col (11) wrap addr */
+	movl    (%esi), %eax             /* read real col number at max col adr */
+ /*
+  * validate column data
+  */
+        cmpl    $COL08_DATA, %eax        /* col must be greater than 8 pattern */
+        jb      bad_ram
+
+        cmpl    $COL11_DATA, %eax        /* and row must be less than 11 pattern */
+        ja      bad_ram
+
+        subl    $COL08_DATA, %eax        /* normalize column data to zero */
+        jc      bad_ram
+        cmpb    %ah,%al                  /* verify all 4 bytes of dword equal */
+        jnz     bad_ram
+        movl    %eax,%edx
+        shrl    $16,%edx
+        cmpw    %dx,%ax
+        jnz     bad_ram
+ /*
+  * merge bank and col data together
+  */
+        addw    %di,%dx                  /* merge of bank and col info in dl */
+ /*
+  * fix ending addr mask based upon col info
+  */
+        movb    $3,%al
+        subb    %dh,%al                  /* dh contains the overflow from the bank/col merge  */
+        movb    %bl,%dh                  /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */
+        xchgw   %cx,%ax                  /* cx = ax = 3 or 2 depending on 2 or 4 bank device */
+        shrb    %cl,%dh	                 /*  */
+        incb    %dh                      /* ending addr is 1 greater than real end */
+        xchgw   %cx,%ax                  /* cx is bank number again */
+ /*
+  * issue all banks precharge
+  */
+bad_reint: 
+        movl    $DRCCTL, %esi            /* setup DRAM control register with */
+        movb    $0x2,%al                 /* All banks precharge */
+	movb     %al, (%esi)
+        movl    $CACHELINESZ, %esi       /* address to init read buffer */
+	movw     %ax, (%esi)
+
+ /*
+  * update ENDING ADDRESS REGISTER
+  */
+        movl    $DRCBENDADR, %edi        /* DRAM ending address register */
+        movl    %ecx,%ebx
+	addl	%ebx, %edi
+	movb    %dh, (%edi)
+ /*
+  * update CONFIG REGISTER
+  */
+        xorb    %dh,%dh
+        movw    $0x00f,%bx
+        movw    %cx,%ax
+        shlw    $2,%ax
+        xchgw   %cx,%ax
+        shlw    %cl,%dx
+        shlw    %cl,%bx
+        notw    %bx
+        xchgw   %cx,%ax
+        movl    $DRCCFG, %edi
+	mov     (%edi), %ax
+        andw    %bx,%ax
+        orw     %dx,%ax
+	movw    %ax, (%edi)
+        jcxz    cleanup
+
+        decw    %cx
+        movl    %ecx,%ebx
+        movl    $DRCBENDADR, %edi        /* DRAM ending address register */
+        movb    $0xff,%al
+	addl	%ebx, %edi
+	movb    %al, (%edi)
+ /*
+  * set control register to NORMAL mode 
+  */
+        movl    $DRCCTL, %esi            /* setup DRAM control register with */
+        movb    $0x0,%al                 /* Normal mode value */
+	movb    %al, (%esi)
+        movl    $CACHELINESZ, %esi       /* address to init read buffer */
+	movw    %ax, (%esi)
+        jmp     nextbank
+
+cleanup: 
+        movl    $DRCBENDADR, %edi        /* DRAM ending address register  */
+        movw    $4,%cx
+        xorw    %ax,%ax
+cleanuplp: 
+	movb   (%edi), %al
+        orb     %al,%al
+        jz      emptybank
+
+        addb    %ah,%al
+        jns     nottoomuch
+
+        movb    $0x7f,%al
+nottoomuch: 
+        movb    %al,%ah
+        orb     $0x80,%al
+	movb    %al, (%edi)
+emptybank: 
+        incl    %edi
+        loop    cleanuplp
+
+#if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T)
+	/* set the CAS latency now since it is hard to do
+	 * when we run from the RAM */
+	movl    $DRCTMCTL, %edi          /* DRAM timing register */
+	movb    (%edi), %al	
+#ifdef CFG_SDRAM_CAS_LATENCY_2T
+	andb    $0xef, %al
+#endif
+#ifdef CFG_SDRAM_CAS_LATENCY_3T
+	orb     $0x10, %al
+#endif	 
+	movb    %al, (%edi)
+#endif
+        movl    $DRCCTL, %edi            /* DRAM Control register */
+        movb    $0x3,%al                 /* Load mode register cmd */
+	movb     %al, (%edi)
+	movw     %ax, (%esi)
+
+
+        movl    $DRCCTL, %edi            /* DRAM Control register */
+        movb    $0x18,%al                /*  Enable refresh and NORMAL mode */
+	movb    %al, (%edi)
+
+        jmp     dram_done
+
+bad_ram: 
+        xorl    %edx,%edx
+        xorl    %edi,%edi
+        jmp     bad_reint
+
+dram_done: 
+	
+	/* readback DRCBENDADR and return the number
+	 * of available ram bytes in %eax */ 
+
+        movl    $DRCBENDADR, %edi        /* DRAM ending address register  */
+	
+	movl	(%edi), %eax
+	movl	%eax, %ecx
+	andl	$0x80000000, %ecx
+	jz	bank2
+	andl	$0x7f000000, %eax
+	shrl	$2, %eax 
+	movl	%eax, %ebx
+
+bank2: 	movl	(%edi), %eax
+	movl	%eax, %ecx
+	andl	$0x00800000, %ecx
+	jz	bank1
+	andl	$0x007f0000, %eax
+	shll	$6, %eax 
+	movl	%eax, %ebx
+
+bank1: 	movl	(%edi), %eax
+	movl	%eax, %ecx
+	andl	$0x00008000, %ecx
+	jz	bank0
+	andl	$0x00007f00, %eax
+	shll	$14, %eax 
+	movl	%eax, %ebx
+
+bank0: 	movl	(%edi), %eax
+	movl	%eax, %ecx
+	andl	$0x00000080, %ecx
+	jz	done
+	andl	$0x0000007f, %eax
+	shll	$22, %eax 
+	movl	%eax, %ebx
+
+done:	movl	%ebx, %eax
+
+	jmp	*%ebp
+
+
+#endif /* CONFIG_SC520 */