summaryrefslogtreecommitdiff
path: root/cpu/blackfin
diff options
context:
space:
mode:
authorMike Frysinger <vapier@gentoo.org>2009-11-09 19:38:23 -0500
committerMike Frysinger <vapier@gentoo.org>2010-01-17 09:17:26 -0500
commit7527feef06b13e9fd5b6d10a4bfc81b59ee56f27 (patch)
tree59b7eb57888f4c26f68e9430346650de19f002d7 /cpu/blackfin
parentdbda2c65e5fec92d0791367b53042983746ce95b (diff)
downloadu-boot-imx-7527feef06b13e9fd5b6d10a4bfc81b59ee56f27.zip
u-boot-imx-7527feef06b13e9fd5b6d10a4bfc81b59ee56f27.tar.gz
u-boot-imx-7527feef06b13e9fd5b6d10a4bfc81b59ee56f27.tar.bz2
Blackfin: support boards with no external memory
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Diffstat (limited to 'cpu/blackfin')
-rw-r--r--cpu/blackfin/initcode.c16
-rw-r--r--cpu/blackfin/start.S6
2 files changed, 21 insertions, 1 deletions
diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c
index bb58898..ed43f85 100644
--- a/cpu/blackfin/initcode.c
+++ b/cpu/blackfin/initcode.c
@@ -538,10 +538,18 @@ program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs)
* self-refresh. So we have to pull it out before programming.
*/
#ifdef EBIU_RSTCTL
+# ifdef CONFIG_EBIU_RSTCTL_VAL
bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL);
+# endif
+# ifdef CONFIG_EBIU_DDRCTL0_VAL
bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL);
+# endif
+# ifdef CONFIG_EBIU_DDRCTL1_VAL
bfin_write_EBIU_DDRCTL1(CONFIG_EBIU_DDRCTL1_VAL);
+# endif
+# ifdef CONFIG_EBIU_DDRCTL2_VAL
bfin_write_EBIU_DDRCTL2(CONFIG_EBIU_DDRCTL2_VAL);
+# endif
# ifdef CONFIG_EBIU_DDRCTL3_VAL
/* default is disable, so don't need to force this */
bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL);
@@ -611,11 +619,17 @@ program_async_controller(ADI_BOOT_DATA *bs)
serial_putc('b');
-#ifdef EBIU_MODE
/* Not all parts have these additional MMRs. */
+#ifdef EBIU_MODE
+# ifdef CONFIG_EBIU_MBSCTL_VAL
bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL);
+# endif
+# ifdef CONFIG_EBIU_MODE_VAL
bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL);
+# endif
+# ifdef CONFIG_EBIU_FCTL_VAL
bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL);
+# endif
#endif
serial_putc('c');
diff --git a/cpu/blackfin/start.S b/cpu/blackfin/start.S
index 44e2725..7a3abba 100644
--- a/cpu/blackfin/start.S
+++ b/cpu/blackfin/start.S
@@ -95,6 +95,7 @@ ENTRY(_start)
/* Save RETX so we can pass it while booting Linux */
r7 = RETX;
+#if CONFIG_MEM_SIZE
/* Figure out where we are currently executing so that we can decide
* how to best reprogram and relocate things. We'll pass below:
* R4: load address of _start
@@ -131,6 +132,9 @@ ENTRY(_start)
r3.h = 0x2000;
cc = r5 < r3 (iu);
if cc jump .Ldma_and_reprogram;
+#else
+ r6 = 1 (x); /* fake loaded_from_ldr = 1 */
+#endif
r0 = 0 (x); /* set bootstruct to NULL */
call _initcode;
jump .Lprogrammed;
@@ -154,6 +158,7 @@ ENTRY(_start)
.Lprogrammed:
serial_early_set_baud
+#if CONFIG_MEM_SIZE
/* Relocate from wherever we are (FLASH/RAM/etc...) to the hardcoded
* monitor location in the end of RAM. We know that memcpy() only
* uses registers, so it is safe to call here. Note that this only
@@ -166,6 +171,7 @@ ENTRY(_start)
r2.l = LO(CONFIG_SYS_MONITOR_LEN);
r2.h = HI(CONFIG_SYS_MONITOR_LEN);
call _memcpy_ASM;
+#endif
/* Initialize BSS section ... we know that memset() does not
* use the BSS, so it is safe to call here. The bootrom LDR