Blackfin: use new bfin read/write mmr helper funcs

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

4 files changed, 90 insertions, 79 deletions

diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c
index ed43f85..5f80ad6 100644
--- a/cpu/blackfin/initcode.c
+++ b/cpu/blackfin/initcode.c
@@ -34,7 +34,7 @@ static inline void serial_init(void)
 		size_t i;
 
 		/* force RTS rather than relying on auto RTS */
-		bfin_write_UART1_MCR(bfin_read_UART1_MCR() | FCPOL);
+		bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) | FCPOL);
 
 		/* Wait for the line to clear up.  We cannot rely on UART
 		 * registers as none of them reflect the status of the RSR.
@@ -64,7 +64,7 @@ static inline void serial_init(void)
 #endif
 
 	if (BFIN_DEBUG_EARLY_SERIAL) {
-		int ucen = *pUART_GCTL & UCEN;
+		int ucen = bfin_read16(&pUART->gctl) & UCEN;
 		serial_early_init();
 
 		/* If the UART is off, that means we need to program
@@ -81,7 +81,7 @@ static inline void serial_deinit(void)
 #ifdef __ADSPBF54x__
 	if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
 		/* clear forced RTS rather than relying on auto RTS */
-		bfin_write_UART1_MCR(bfin_read_UART1_MCR() & ~FCPOL);
+		bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) & ~FCPOL);
 	}
 #endif
 }
@@ -95,9 +95,9 @@ static inline void serial_putc(char c)
 	if (c == '\n')
 		serial_putc('\r');
 
-	*pUART_THR = c;
+	bfin_write16(&pUART->thr, c);
 
-	while (!(*pUART_LSR & TEMT))
+	while (!(bfin_read16(&pUART->lsr) & TEMT))
 		continue;
 }
 
diff --git a/cpu/blackfin/interrupts.c b/cpu/blackfin/interrupts.c
index 921bfe0..54a67b4 100644
--- a/cpu/blackfin/interrupts.c
+++ b/cpu/blackfin/interrupts.c
@@ -97,12 +97,12 @@ void __udelay(unsigned long usec)
 #define MAX_TIM_LOAD	0xFFFFFFFF
 int timer_init(void)
 {
-	*pTCNTL = 0x1;
+	bfin_write_TCNTL(0x1);
 	CSYNC();
-	*pTSCALE = 0x0;
-	*pTCOUNT = MAX_TIM_LOAD;
-	*pTPERIOD = MAX_TIM_LOAD;
-	*pTCNTL = 0x7;
+	bfin_write_TSCALE(0x0);
+	bfin_write_TCOUNT(MAX_TIM_LOAD);
+	bfin_write_TPERIOD(MAX_TIM_LOAD);
+	bfin_write_TCNTL(0x7);
 	CSYNC();
 
 	timestamp = 0;
@@ -130,7 +130,7 @@ ulong get_timer(ulong base)
 	ulong milisec;
 
 	/* Number of clocks elapsed */
-	ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT));
+	ulong clocks = (MAX_TIM_LOAD - bfin_read_TCOUNT());
 
 	/*
 	 * Find if the TCOUNT is reset
diff --git a/cpu/blackfin/serial.c b/cpu/blackfin/serial.c
index 2abda18..901cb97 100644
--- a/cpu/blackfin/serial.c
+++ b/cpu/blackfin/serial.c
@@ -44,10 +44,6 @@
 
 #ifdef CONFIG_UART_CONSOLE
 
-#if defined(UART_LSR) && (CONFIG_UART_CONSOLE != 0)
-# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART
-#endif
-
 #include "serial.h"
 
 #ifdef CONFIG_DEBUG_SERIAL
@@ -63,7 +59,7 @@ size_t cache_count;
 static uint16_t uart_lsr_save;
 static uint16_t uart_lsr_read(void)
 {
-	uint16_t lsr = *pUART_LSR;
+	uint16_t lsr = bfin_read16(&pUART->lsr);
 	uart_lsr_save |= (lsr & (OE|PE|FE|BI));
 	return lsr | uart_lsr_save;
 }
@@ -71,15 +67,21 @@ static uint16_t uart_lsr_read(void)
 static void uart_lsr_clear(void)
 {
 	uart_lsr_save = 0;
-	*pUART_LSR |= -1;
+	bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1);
 }
 #else
 /* When debugging is disabled, we only care about the DR bit, so if other
  * bits get set/cleared, we don't really care since we don't read them
  * anyways (and thus anomaly 05000099 is irrelevant).
  */
-static inline uint16_t uart_lsr_read(void) { return *pUART_LSR; }
-static inline void uart_lsr_clear(void) { *pUART_LSR = -1; }
+static uint16_t uart_lsr_read(void)
+{
+	return bfin_read16(&pUART->lsr);
+}
+static void uart_lsr_clear(void)
+{
+	bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1);
+}
 #endif
 
 /* Symbol for our assembly to call. */
@@ -130,7 +132,7 @@ void serial_putc(const char c)
 		continue;
 
 	/* queue the character for transmission */
-	*pUART_THR = c;
+	bfin_write16(&pUART->thr, c);
 	SSYNC();
 
 	WATCHDOG_RESET();
@@ -151,7 +153,7 @@ int serial_getc(void)
 		continue;
 
 	/* grab the new byte */
-	uart_rbr_val = *pUART_RBR;
+	uart_rbr_val = bfin_read16(&pUART->rbr);
 
 #ifdef CONFIG_DEBUG_SERIAL
 	/* grab & clear the LSR */
@@ -165,8 +167,8 @@ int serial_getc(void)
 		uint16_t dll, dlh;
 		printf("\n[SERIAL ERROR]\n");
 		ACCESS_LATCH();
-		dll = *pUART_DLL;
-		dlh = *pUART_DLH;
+		dll = bfin_read16(&pUART->dll);
+		dlh = bfin_read16(&pUART->dlh);
 		ACCESS_PORT_IER();
 		printf("\tDLL=0x%x DLH=0x%x\n", dll, dlh);
 		do {
diff --git a/cpu/blackfin/serial.h b/cpu/blackfin/serial.h
index 6cbc564..5f9be86 100644
--- a/cpu/blackfin/serial.h
+++ b/cpu/blackfin/serial.h
@@ -24,71 +24,80 @@
 # define BFIN_DEBUG_EARLY_SERIAL 0
 #endif
 
+#ifndef __ASSEMBLY__
+
 #define LOB(x) ((x) & 0xFF)
 #define HIB(x) (((x) >> 8) & 0xFF)
 
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+struct bfin_mmr_serial {
+#ifdef __ADSPBF54x__
+	__BFP(dll);
+	__BFP(dlh);
+	__BFP(gctl);
+	__BFP(lcr);
+	__BFP(mcr);
+	__BFP(lsr);
+	__BFP(msr);
+	__BFP(scr);
+	__BFP(ier_set);
+	__BFP(ier_clear);
+	__BFP(thr);
+	__BFP(rbr);
+#else
+	union {
+		u16 dll;
+		u16 thr;
+		const u16 rbr;
+	};
+	const u16 __spad0;
+	union {
+		u16 dlh;
+		u16 ier;
+	};
+	const u16 __spad1;
+	const __BFP(iir);
+	__BFP(lcr);
+	__BFP(mcr);
+	__BFP(lsr);
+	__BFP(msr);
+	__BFP(scr);
+	const u32 __spad2;
+	__BFP(gctl);
+#endif
+};
+#undef __BFP
+
 #ifndef UART_LSR
 # if (CONFIG_UART_CONSOLE == 3)
-#  define pUART_DLH  pUART3_DLH
-#  define pUART_DLL  pUART3_DLL
-#  define pUART_GCTL pUART3_GCTL
-#  define pUART_IER  pUART3_IER
-#  define pUART_IERC pUART3_IER_CLEAR
-#  define pUART_LCR  pUART3_LCR
-#  define pUART_LSR  pUART3_LSR
-#  define pUART_RBR  pUART3_RBR
-#  define pUART_THR  pUART3_THR
-#  define  UART_THR   UART3_THR
-#  define  UART_LSR   UART3_LSR
+#  define UART_BASE UART3_DLL
 # elif (CONFIG_UART_CONSOLE == 2)
-#  define pUART_DLH  pUART2_DLH
-#  define pUART_DLL  pUART2_DLL
-#  define pUART_GCTL pUART2_GCTL
-#  define pUART_IER  pUART2_IER
-#  define pUART_IERC pUART2_IER_CLEAR
-#  define pUART_LCR  pUART2_LCR
-#  define pUART_LSR  pUART2_LSR
-#  define pUART_RBR  pUART2_RBR
-#  define pUART_THR  pUART2_THR
-#  define  UART_THR   UART2_THR
-#  define  UART_LSR   UART2_LSR
+#  define UART_BASE UART2_DLL
 # elif (CONFIG_UART_CONSOLE == 1)
-#  define pUART_DLH  pUART1_DLH
-#  define pUART_DLL  pUART1_DLL
-#  define pUART_GCTL pUART1_GCTL
-#  define pUART_IER  pUART1_IER
-#  define pUART_IERC pUART1_IER_CLEAR
-#  define pUART_LCR  pUART1_LCR
-#  define pUART_LSR  pUART1_LSR
-#  define pUART_RBR  pUART1_RBR
-#  define pUART_THR  pUART1_THR
-#  define  UART_THR   UART1_THR
-#  define  UART_LSR   UART1_LSR
+#  define UART_BASE UART1_DLL
 # elif (CONFIG_UART_CONSOLE == 0)
-#  define pUART_DLH  pUART0_DLH
-#  define pUART_DLL  pUART0_DLL
-#  define pUART_GCTL pUART0_GCTL
-#  define pUART_IER  pUART0_IER
-#  define pUART_IERC pUART0_IER_CLEAR
-#  define pUART_LCR  pUART0_LCR
-#  define pUART_LSR  pUART0_LSR
-#  define pUART_RBR  pUART0_RBR
-#  define pUART_THR  pUART0_THR
-#  define  UART_THR   UART0_THR
-#  define  UART_LSR   UART0_LSR
+#  define UART_BASE UART0_DLL
+# endif
+#else
+# if CONFIG_UART_CONSOLE != 0
+#  error CONFIG_UART_CONSOLE must be 0 on parts with only one UART
 # endif
+# define UART_BASE UART_DLL
 #endif
-
-#ifndef __ASSEMBLY__
+#define pUART ((volatile struct bfin_mmr_serial *)UART_BASE)
 
 #ifdef __ADSPBF54x__
 # define ACCESS_LATCH()
 # define ACCESS_PORT_IER()
-# define CLEAR_IER()       (*pUART_IERC = 0)
 #else
-# define ACCESS_LATCH()    (*pUART_LCR |= DLAB)
-# define ACCESS_PORT_IER() (*pUART_LCR &= ~DLAB)
-# define CLEAR_IER()       (*pUART_IER = 0)
+# define ACCESS_LATCH() \
+	bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) | DLAB)
+# define ACCESS_PORT_IER() \
+	bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) & ~DLAB)
 #endif
 
 __attribute__((always_inline))
@@ -142,10 +151,10 @@ static inline void serial_early_init(void)
 	serial_do_portmux();
 
 	/* always enable UART -- avoids anomalies 05000309 and 05000350 */
-	*pUART_GCTL = UCEN;
+	bfin_write16(&pUART->gctl, UCEN);
 
 	/* Set LCR to Word Lengh 8-bit word select */
-	*pUART_LCR = WLS_8;
+	bfin_write16(&pUART->lcr, WLS_8);
 
 	SSYNC();
 }
@@ -158,8 +167,8 @@ static inline void serial_early_put_div(uint16_t divisor)
 	SSYNC();
 
 	/* Program the divisor to get the baud rate we want */
-	*pUART_DLL = LOB(divisor);
-	*pUART_DLH = HIB(divisor);
+	bfin_write16(&pUART->dll, LOB(divisor));
+	bfin_write16(&pUART->dlh, HIB(divisor));
 	SSYNC();
 
 	/* Clear DLAB in LCR to Access THR RBR IER */
@@ -174,8 +183,8 @@ static inline uint16_t serial_early_get_div(void)
 	ACCESS_LATCH();
 	SSYNC();
 
-	uint8_t dll = *pUART_DLL;
-	uint8_t dlh = *pUART_DLH;
+	uint8_t dll = bfin_read16(&pUART->dll);
+	uint8_t dlh = bfin_read16(&pUART->dlh);
 	uint16_t divisor = (dlh << 8) | dll;
 
 	/* Clear DLAB in LCR to Access THR RBR IER */