summaryrefslogtreecommitdiff
path: root/cpu/blackfin/initcode.c
diff options
context:
space:
mode:
authorMike Frysinger <vapier@gentoo.org>2009-04-24 23:39:41 -0400
committerMike Frysinger <vapier@gentoo.org>2009-05-06 08:47:21 -0400
commit02778f2f1b4b1a28b492367477db27c58d45ae35 (patch)
treef7f5b18e011460da48e86b93d808052e945c7433 /cpu/blackfin/initcode.c
parentaf2c37378f203857d5e6c957e77a14c2da5b59d2 (diff)
downloadu-boot-imx-02778f2f1b4b1a28b492367477db27c58d45ae35.zip
u-boot-imx-02778f2f1b4b1a28b492367477db27c58d45ae35.tar.gz
u-boot-imx-02778f2f1b4b1a28b492367477db27c58d45ae35.tar.bz2
Blackfin: fix booting with older bootroms (no EVT1)
When dropping jump block support, the assumption was that all bootroms supported entry point redirection via the EVT1 register. Unfortunately, this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2 and older and BF561). No one really noticed earlier because these parts usually are booted by bypassing the bootrom entirely, and older BF533 parts are not supported at all (too many anomalies). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Diffstat (limited to 'cpu/blackfin/initcode.c')
-rw-r--r--cpu/blackfin/initcode.c2
1 files changed, 2 insertions, 0 deletions
diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c
index c0fe2c6..a039cbb 100644
--- a/cpu/blackfin/initcode.c
+++ b/cpu/blackfin/initcode.c
@@ -543,9 +543,11 @@ void initcode(ADI_BOOT_DATA *bootstruct)
serial_putc('T');
+#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
/* tell the bootrom where our entry point is */
if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS)
bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE);
+#endif
serial_putc('>');
serial_putc('\n');