Blackfin: unify cpu and boot modes

All of the duplicated code for Blackfin processors and boot modes have been
unified.  After all, the core is the same for all processors, just the
peripheral set differs (which gets handled in the drivers).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 0 insertions, 303 deletions

diff --git a/cpu/bf561/start.S b/cpu/bf561/start.S
deleted file mode 100644
index 6565de8..0000000
--- a/cpu/bf561/start.S
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * U-boot - start.S Startup file of u-boot for BF533/BF561
- *
- * Copyright (c) 2005-2007 Analog Devices Inc.
- *
- * This file is based on head.S
- * Copyright (c) 2003  Metrowerks/Motorola
- * Copyright (C) 1998  D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
- *		       Kenneth Albanowski <kjahds@kjahds.com>,
- *		       The Silver Hammer Group, Ltd.
- * (c) 1995, Dionne & Associates
- * (c) 1995, DKG Display Tech.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/*
- * Note: A change in this file subsequently requires a change in
- *       board/$(board_name)/config.mk for a valid u-boot.bin
- */
-
-#define ASSEMBLY
-
-#include <linux/config.h>
-#include <config.h>
-#include <asm/blackfin.h>
-
-#include <asm/mach-common/bits/core.h>
-#include <asm/mach-common/bits/dma.h>
-#include <asm/mach-common/bits/pll.h>
-
-.global _stext;
-.global __bss_start;
-.global start;
-.global _start;
-.global edata;
-.global _exit;
-.global init_sdram;
-
-.text
-_start:
-start:
-_stext:
-
-	R0 = 0x32;
-	SYSCFG = R0;
-	SSYNC;
-
-	/*
-	 * As per HW reference manual DAG registers,
-	 * DATA and Address resgister shall be zero'd
-	 * in initialization, after a reset state
-	 */
-	r1 = 0;	/* Data registers zero'd */
-	r2 = 0;
-	r3 = 0;
-	r4 = 0;
-	r5 = 0;
-	r6 = 0;
-	r7 = 0;
-
-	p0 = 0; /* Address registers zero'd */
-	p1 = 0;
-	p2 = 0;
-	p3 = 0;
-	p4 = 0;
-	p5 = 0;
-
-	i0 = 0; /* DAG Registers zero'd */
-	i1 = 0;
-	i2 = 0;
-	i3 = 0;
-	m0 = 0;
-	m1 = 0;
-	m3 = 0;
-	m3 = 0;
-	l0 = 0;
-	l1 = 0;
-	l2 = 0;
-	l3 = 0;
-	b0 = 0;
-	b1 = 0;
-	b2 = 0;
-	b3 = 0;
-
-	/*
-	 * Set loop counters to zero, to make sure that
-	 * hw loops are disabled.
-	 */
-	r0  = 0;
-	lc0 = r0;
-	lc1 = r0;
-
-	SSYNC;
-
-	/* Check soft reset status */
-	p0.h = SWRST >> 16;
-	p0.l = SWRST & 0xFFFF;
-	r0.l = w[p0];
-
-	cc = bittst(r0, 15);
-	if !cc jump no_soft_reset;
-
-	/* Clear Soft reset */
-	r0 = 0x0000;
-	w[p0] = r0;
-	ssync;
-
-no_soft_reset:
-	nop;
-
-	/* Clear EVT registers */
-	p0.h = (EVT0 >> 16);
-	p0.l = (EVT0 & 0xFFFF);
-	p0 += 8;
-	p1 = 14;
-	r1 = 0;
-	LSETUP(4,4) lc0 = p1;
-	[ p0 ++ ] = r1;
-
-	p0.h = hi(SICA_IWR0);
-	p0.l = lo(SICA_IWR0);
-	r0.l = 0x1;
-	w[p0] = r0.l;
-	SSYNC;
-
-	sp.l = (0xffb01000 & 0xFFFF);
-	sp.h = (0xffb01000 >> 16);
-
-	/*
-	 * Check if the code is in SDRAM
-	 * If the code is in SDRAM, skip SDRAM initializaiton
-	 */
-	call get_pc;
-	r3.l = 0x0;
-	r3.h = 0x2000;
-	cc = r0 < r3 (iu);
-	if cc jump sdram_initialized;
-	call init_sdram;
-	/* relocate into to RAM */
-sdram_initialized:
-	call get_pc;
-offset:
-	r2.l = offset;
-	r2.h = offset;
-	r3.l = start;
-	r3.h = start;
-	r1 = r2 - r3;
-
-	r0 = r0 - r1;
-	p1 = r0;
-
-	p2.l = (CFG_MONITOR_BASE & 0xffff);
-	p2.h = (CFG_MONITOR_BASE >> 16);
-
-	p3 = 0x04;
-	p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff);
-	p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16);
-loop1:
-	r1 = [p1 ++ p3];
-	[p2 ++ p3] = r1;
-	cc=p2==p4;
-	if !cc jump loop1;
-	/*
-	 * configure STACK
-	 */
-	r0.h = (CONFIG_STACKBASE >> 16);
-	r0.l = (CONFIG_STACKBASE & 0xFFFF);
-	sp = r0;
-	fp = sp;
-
-	/*
-	 * This next section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* To keep ourselves in the supervisor mode */
-	p0.l = (EVT15 & 0xFFFF);
-	p0.h = (EVT15 >> 16);
-
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-
-	p0.l = (IMASK & 0xFFFF);
-	p0.h = (IMASK >> 16);
-	r0.l = LO(EVT_IVG15);
-	r0.h = HI(EVT_IVG15);
-	[p0] = r0;
-	raise 15;
-	p0.l = WAIT_HERE;
-	p0.h = WAIT_HERE;
-	reti = p0;
-	rti;
-
-WAIT_HERE:
-	jump WAIT_HERE;
-
-.global _real_start;
-_real_start:
-	[ -- sp ] = reti;
-
-	/* DMA reset code to Hi of L1 SRAM */
-copy:
-	P1.H = hi(SYSMMR_BASE);	/* P1 Points to the beginning of SYSTEM MMR Space */
-	P1.L = lo(SYSMMR_BASE);
-
-	R0.H = reset_start;	/* Source Address (high) */
-	R0.L = reset_start;	/* Source Address (low) */
-	R1.H = reset_end;
-	R1.L = reset_end;
-	R2 = R1 - R0;		/* Count */
-	R1.H = hi(L1_INST_SRAM);	/* Destination Address (high) */
-	R1.L = lo(L1_INST_SRAM);	/* Destination Address (low) */
-	R3.L = DMAEN;		/* Source DMAConfig Value (8-bit words) */
-	R4.L = (DI_EN | WNR | DMAEN);	/* Destination DMAConfig Value (8-bit words) */
-
-DMA:
-	R6 = 0x1 (Z);
-	W[P1+OFFSET_(IMDMA_S0_X_MODIFY)] = R6;	/* Source Modify = 1 */
-	W[P1+OFFSET_(IMDMA_D0_X_MODIFY)] = R6;	/* Destination Modify = 1 */
-
-	[P1+OFFSET_(IMDMA_S0_START_ADDR)] = R0;	/* Set Source Base Address */
-	W[P1+OFFSET_(IMDMA_S0_X_COUNT)] = R2;	/* Set Source Count */
-	/* Set Source  DMAConfig = DMA Enable,
-	Memory Read,  8-Bit Transfers, 1-D DMA, Flow - Stop */
-	W[P1+OFFSET_(IMDMA_S0_CONFIG)] = R3;
-
-	[P1+OFFSET_(IMDMA_D0_START_ADDR)] = R1;	/* Set Destination Base Address */
-	W[P1+OFFSET_(IMDMA_D0_X_COUNT)] = R2;	/* Set Destination Count */
-	/* Set Destination DMAConfig = DMA Enable,
-	Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
-	W[P1+OFFSET_(IMDMA_D0_CONFIG)] = R4;
-
-WAIT_DMA_DONE:
-	p0.h = hi(IMDMA_D0_IRQ_STATUS);
-	p0.l = lo(IMDMA_D0_IRQ_STATUS);
-	R0 = W[P0](Z);
-	CC = BITTST(R0, 0);
-	if ! CC jump WAIT_DMA_DONE
-
-	R0 = 0x1;
-	W[P1+OFFSET_(IMDMA_D0_IRQ_STATUS)] = R0;	/* Write 1 to clear DMA interrupt */
-
-	/* Initialize BSS Section with 0 s */
-	p1.l = __bss_start;
-	p1.h = __bss_start;
-	p2.l = _end;
-	p2.h = _end;
-	r1 = p1;
-	r2 = p2;
-	r3 = r2 - r1;
-	r3 = r3 >> 2;
-	p3 = r3;
-	lsetup (_clear_bss, _clear_bss_end ) lc1 = p3;
-	CC = p2<=p1;
-	if CC jump _clear_bss_skip;
-	r0 = 0;
-_clear_bss:
-_clear_bss_end:
-	[p1++] = r0;
-_clear_bss_skip:
-
-	p0.l = _start1;
-	p0.h = _start1;
-	jump (p0);
-
-reset_start:
-	p0.h = WDOG_CNT >> 16;
-	p0.l = WDOG_CNT & 0xffff;
-	r0 = 0x0010;
-	w[p0] = r0;
-	p0.h = WDOG_CTL >> 16;
-	p0.l = WDOG_CTL & 0xffff;
-	r0 = 0x0000;
-	w[p0] = r0;
-reset_wait:
-	jump reset_wait;
-
-reset_end: nop;
-
-_exit:
-	jump.s	_exit;
-get_pc:
-	r0 = rets;
-	rts;