Merge with git://www.denx.de/git/u-boot.git

1 files changed, 174 insertions, 0 deletions

diff --git a/cpu/bf537/init_sdram.S b/cpu/bf537/init_sdram.S
new file mode 100644
index 0000000..897a589
--- /dev/null
+++ b/cpu/bf537/init_sdram.S
@@ -0,0 +1,174 @@
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/mem_init.h>
+.global init_sdram;
+
+#if (BFIN_BOOT_MODE != BF537_UART_BOOT)
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV   CONFIG_CCLK_DIV_not_defined_properly
+#endif
+#endif
+
+init_sdram:
+	[--SP] = ASTAT;
+	[--SP] = RETS;
+	[--SP] = (R7:0);
+	[--SP] = (P5:0);
+
+#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+	p0.h = hi(SIC_IWR);
+	p0.l = lo(SIC_IWR);
+	r0.l = 0x1;
+	w[p0] = r0.l;
+	SSYNC;
+
+	p0.h = hi(SPI_BAUD);
+	p0.l = lo(SPI_BAUD);
+	r0.l = CONFIG_SPI_BAUD;
+	w[p0] = r0.l;
+	SSYNC;
+#endif
+
+#if (BFIN_BOOT_MODE != BF537_UART_BOOT)
+
+#ifdef CONFIG_BF537
+	/* Enable PHY CLK buffer output */
+	p0.h = hi(VR_CTL);
+	p0.l = lo(VR_CTL);
+	r0.l = w[p0];
+	bitset(r0, 14);
+	w[p0] = r0.l;
+	ssync;
+#endif
+	/*
+	 * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable
+	 */
+	p0.h = hi(PLL_LOCKCNT);
+	p0.l = lo(PLL_LOCKCNT);
+	r0 = 0x300(Z);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * Put SDRAM in self-refresh, incase anything is running
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITSET (R0, 24);
+	[P2] = R0;
+	SSYNC;
+
+	/*
+	 *  Set PLL_CTL with the value that we calculate in R0
+	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
+	 *   - [7]     = output delay (add 200ps of delay to mem signals)
+	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
+	 *   - [5]     = PDWN      : 1=All Clocks off
+	 *   - [3]     = STOPCK    : 1=Core Clock off
+	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
+	 *   - [0]     = DF	: 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+	 *   all other bits set to zero
+	 */
+
+	r0 = CONFIG_VCO_MULT & 63;	/* Load the VCO multiplier */
+	r0 = r0 << 9;			/* Shift it over */
+	r1 = CONFIG_CLKIN_HALF;		/* Do we need to divide CLKIN by 2?*/
+	r0 = r1 | r0;
+	r1 = CONFIG_PLL_BYPASS;		/* Bypass the PLL? */
+	r1 = r1 << 8;			/* Shift it over */
+	r0 = r1 | r0;			/* add them all together */
+
+	p0.h = hi(PLL_CTL);
+	p0.l = lo(PLL_CTL);		/* Load the address */
+	cli r2;				/* Disable interrupts */
+	ssync;
+	w[p0] = r0.l;			/* Set the value */
+	idle;				/* Wait for the PLL to stablize */
+	sti r2;				/* Enable interrupts */
+
+check_again:
+	p0.h = hi(PLL_STAT);
+	p0.l = lo(PLL_STAT);
+	R0 = W[P0](Z);
+	CC = BITTST(R0,5);
+	if ! CC jump check_again;
+
+	/* Configure SCLK & CCLK Dividers */
+	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+	p0.h = hi(PLL_DIV);
+	p0.l = lo(PLL_DIV);
+	w[p0] = r0.l;
+	ssync;
+#endif
+
+	/*
+	 * Now, Initialize the SDRAM,
+	 * start with the SDRAM Refresh Rate Control Register
+	 */
+	p0.l = lo(EBIU_SDRRC);
+	p0.h = hi(EBIU_SDRRC);
+	r0 = mem_SDRRC;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Memory Bank Control Register - bank specific parameters
+	 */
+	p0.l = (EBIU_SDBCTL & 0xFFFF);
+	p0.h = (EBIU_SDBCTL >> 16);
+	r0 = mem_SDBCTL;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Global Control Register - global programmable parameters
+	 * Disable self-refresh
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITCLR (R0, 24);
+
+	/*
+	 * Check if SDRAM is already powered up, if it is, enable self-refresh
+	 */
+	p0.h = hi(EBIU_SDSTAT);
+	p0.l = lo(EBIU_SDSTAT);
+	r2.l = w[p0];
+	cc = bittst(r2,3);
+	if !cc jump skip;
+	NOP;
+	BITSET (R0, 23);
+skip:
+	[P2] = R0;
+	SSYNC;
+
+	/* Write in the new value in the register */
+	R0.L = lo(mem_SDGCTL);
+	R0.H = hi(mem_SDGCTL);
+	[P2] = R0;
+	SSYNC;
+	nop;
+
+	(P5:0) = [SP++];
+	(R7:0) = [SP++];
+	RETS   = [SP++];
+	ASTAT  = [SP++];
+	RTS;