summaryrefslogtreecommitdiff
path: root/cpu/bf533/cplbmgr.S
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.denx.de>2006-03-12 02:12:27 +0100
committerWolfgang Denk <wd@pollux.denx.de>2006-03-12 02:12:27 +0100
commit6cb142fa3b732a2cea257ca39ef4a7dbe81a32e1 (patch)
tree78e2970c2f95744a0b776b968c24eaca950305c8 /cpu/bf533/cplbmgr.S
parent0afe519a433184fb1270ff0823971130353a807f (diff)
downloadu-boot-imx-6cb142fa3b732a2cea257ca39ef4a7dbe81a32e1.zip
u-boot-imx-6cb142fa3b732a2cea257ca39ef4a7dbe81a32e1.tar.gz
u-boot-imx-6cb142fa3b732a2cea257ca39ef4a7dbe81a32e1.tar.bz2
Add missing Blackfin files.
Diffstat (limited to 'cpu/bf533/cplbmgr.S')
-rw-r--r--cpu/bf533/cplbmgr.S601
1 files changed, 601 insertions, 0 deletions
diff --git a/cpu/bf533/cplbmgr.S b/cpu/bf533/cplbmgr.S
new file mode 100644
index 0000000..fc3e3a8
--- /dev/null
+++ b/cpu/bf533/cplbmgr.S
@@ -0,0 +1,601 @@
+/*This file is subject to the terms and conditions of the GNU General Public
+ * License.
+ *
+ * Blackfin BF533/2.6 support : LG Soft India
+ * Modification: Dec 07 2004
+ * 1. Correction in icheck_lock. Valid lock entries were
+ * geting victimized, for instruction cplb replacement.
+ * 2. Setup loop's are modified as now toolchain support's P Indexed
+ * addressing
+ * :LG Soft India
+ *
+ */
+
+/* Usage: int _cplb_mgr(is_data_miss,int enable_cache)
+ * is_data_miss==2 => Mark as Dirty, write to the clean data page
+ * is_data_miss==1 => Replace a data CPLB.
+ * is_data_miss==0 => Replace an instruction CPLB.
+ *
+ * Returns:
+ * CPLB_RELOADED => Successfully updated CPLB table.
+ * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted.This indicates
+ * that the CPLBs in the configuration tablei are badly
+ * configured, as this should never occur.
+ * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the exception,
+ * is not covered by any of the CPLBs in the configuration
+ * table. The application isi presumably misbehaving.
+ * CPLB_PROT_VIOL => The address being accessed, that triggered thei exception,
+ * was not a first-write to a clean Write Back Data page,
+ * and so presumably is a genuine violation of the page's
+ * protection attributes. The application is misbehaving.
+ */
+#define ASSEMBLY
+
+#include <asm-blackfin/linkage.h>
+#include <asm-blackfin/blackfin.h>
+#include <asm-blackfin/cplbtab.h>
+#include <asm-blackfin/cplb.h>
+
+.text
+
+.align 2;
+ENTRY(_cplb_mgr)
+
+ [--SP]=( R7:0,P5:0 );
+
+ CC = R0 == 2;
+ IF CC JUMP dcplb_write;
+
+ CC = R0 == 0;
+ IF !CC JUMP dcplb_miss_compare;
+
+ /* ICPLB Miss Exception. We need to choose one of the
+ * currently-installed CPLBs, and replace it with one
+ * from the configuration table.
+ */
+
+ P4.L = (ICPLB_FAULT_ADDR & 0xFFFF);
+ P4.H = (ICPLB_FAULT_ADDR >> 16);
+
+ P1 = 16;
+ P5.L = page_size_table;
+ P5.H = page_size_table;
+
+ P0.L = (ICPLB_DATA0 & 0xFFFF);
+ P0.H = (ICPLB_DATA0 >> 16);
+ R4 = [P4]; /* Get faulting address*/
+ R6 = 64; /* Advance past the fault address, which*/
+ R6 = R6 + R4; /* we'll use if we find a match*/
+ R3 = ((16 << 8) | 2); /* Extract mask, bits 16 and 17.*/
+
+ R5 = 0;
+isearch:
+
+ R1 = [P0-0x100]; /* Address for this CPLB */
+
+ R0 = [P0++]; /* Info for this CPLB*/
+ CC = BITTST(R0,0); /* Is the CPLB valid?*/
+ IF !CC JUMP nomatch; /* Skip it, if not.*/
+ CC = R4 < R1(IU); /* If fault address less than page start*/
+ IF CC JUMP nomatch; /* then skip this one.*/
+ R2 = EXTRACT(R0,R3.L) (Z); /* Get page size*/
+ P1 = R2;
+ P1 = P5 + (P1<<2); /* index into page-size table*/
+ R2 = [P1]; /* Get the page size*/
+ R1 = R1 + R2; /* and add to page start, to get page end*/
+ CC = R4 < R1(IU); /* and see whether fault addr is in page.*/
+ IF !CC R4 = R6; /* If so, advance the address and finish loop.*/
+ IF !CC JUMP isearch_done;
+nomatch:
+ /* Go around again*/
+ R5 += 1;
+ CC = BITTST(R5, 4); /* i.e CC = R5 >= 16*/
+ IF !CC JUMP isearch;
+
+isearch_done:
+ I0 = R4; /* Fault address we'll search for*/
+
+ /* set up pointers */
+ P0.L = (ICPLB_DATA0 & 0xFFFF);
+ P0.H = (ICPLB_DATA0 >> 16);
+
+ /* The replacement procedure for ICPLBs */
+
+ P4.L = (IMEM_CONTROL & 0xFFFF);
+ P4.H = (IMEM_CONTROL >> 16);
+
+ /* disable cplbs */
+ R5 = [P4]; /* Control Register*/
+ BITCLR(R5,ENICPLB_P);
+ CLI R1;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R1;
+
+ R1 = -1; /* end point comparison */
+ R3 = 16; /* counter */
+
+ /* Search through CPLBs for first non-locked entry */
+ /* Overwrite it by moving everyone else up by 1 */
+icheck_lock:
+ R0 = [P0++];
+ R3 = R3 + R1;
+ CC = R3 == R1;
+ IF CC JUMP all_locked;
+ CC = BITTST(R0, 0); /* an invalid entry is good */
+ IF !CC JUMP ifound_victim;
+ CC = BITTST(R0,1); /* but a locked entry isn't */
+ IF CC JUMP icheck_lock;
+
+ifound_victim:
+#ifdef CONFIG_CPLB_INFO
+ R7 = [P0 - 0x104];
+ P2.L = ipdt_table;
+ P2.H = ipdt_table;
+ P3.L = ipdt_swapcount_table;
+ P3.H = ipdt_swapcount_table;
+ P3 += -4;
+icount:
+ R2 = [P2]; /* address from config table */
+ P2 += 8;
+ P3 += 8;
+ CC = R2==-1;
+ IF CC JUMP icount_done;
+ CC = R7==R2;
+ IF !CC JUMP icount;
+ R7 = [P3];
+ R7 += 1;
+ [P3] = R7;
+ CSYNC;
+icount_done:
+#endif
+ LC0=R3;
+ LSETUP(is_move,ie_move) LC0;
+is_move:
+ R0 = [P0];
+ [P0 - 4] = R0;
+ R0 = [P0 - 0x100];
+ [P0-0x104] = R0;
+ie_move:P0+=4;
+
+ /* We've made space in the ICPLB table, so that ICPLB15
+ * is now free to be overwritten. Next, we have to determine
+ * which CPLB we need to install, from the configuration
+ * table. This is a matter of getting the start-of-page
+ * addresses and page-lengths from the config table, and
+ * determining whether the fault address falls within that
+ * range.
+ */
+
+ P2.L = ipdt_table;
+ P2.H = ipdt_table;
+#ifdef CONFIG_CPLB_INFO
+ P3.L = ipdt_swapcount_table;
+ P3.H = ipdt_swapcount_table;
+ P3 += -8;
+#endif
+ P0.L = page_size_table;
+ P0.H = page_size_table;
+
+ /* Retrieve our fault address (which may have been advanced
+ * because the faulting instruction crossed a page boundary).
+ */
+
+ R0 = I0;
+
+ /* An extraction pattern, to get the page-size bits from
+ * the CPLB data entry. Bits 16-17, so two bits at posn 16.
+ */
+
+ R1 = ((16<<8)|2);
+inext: R4 = [P2++]; /* address from config table */
+ R2 = [P2++]; /* data from config table */
+#ifdef CONFIG_CPLB_INFO
+ P3 += 8;
+#endif
+
+ CC = R4 == -1; /* End of config table*/
+ IF CC JUMP no_page_in_table;
+
+ /* See if failed address > start address */
+ CC = R4 <= R0(IU);
+ IF !CC JUMP inext;
+
+ /* extract page size (17:16)*/
+ R3 = EXTRACT(R2, R1.L) (Z);
+
+ /* add page size to addr to get range */
+
+ P5 = R3;
+ P5 = P0 + (P5 << 2); /* scaled, for int access*/
+ R3 = [P5];
+ R3 = R3 + R4;
+
+ /* See if failed address < (start address + page size) */
+ CC = R0 < R3(IU);
+ IF !CC JUMP inext;
+
+ /* We've found a CPLB in the config table that covers
+ * the faulting address, so install this CPLB into the
+ * last entry of the table.
+ */
+
+ P1.L = (ICPLB_DATA15 & 0xFFFF); /*ICPLB_DATA15*/
+ P1.H = (ICPLB_DATA15 >> 16);
+ [P1] = R2;
+ [P1-0x100] = R4;
+#ifdef CONFIG_CPLB_INFO
+ R3 = [P3];
+ R3 += 1;
+ [P3] = R3;
+#endif
+
+ /* P4 points to IMEM_CONTROL, and R5 contains its old
+ * value, after we disabled ICPLBS. Re-enable them.
+ */
+
+ BITSET(R5,ENICPLB_P);
+ CLI R2;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R2;
+
+ ( R7:0,P5:0 ) = [SP++];
+ R0 = CPLB_RELOADED;
+ RTS;
+
+/* FAILED CASES*/
+no_page_in_table:
+ ( R7:0,P5:0 ) = [SP++];
+ R0 = CPLB_NO_ADDR_MATCH;
+ RTS;
+all_locked:
+ ( R7:0,P5:0 ) = [SP++];
+ R0 = CPLB_NO_UNLOCKED;
+ RTS;
+prot_violation:
+ ( R7:0,P5:0 ) = [SP++];
+ R0 = CPLB_PROT_VIOL;
+ RTS;
+
+dcplb_write:
+
+ /* if a DCPLB is marked as write-back (CPLB_WT==0), and
+ * it is clean (CPLB_DIRTY==0), then a write to the
+ * CPLB's page triggers a protection violation. We have to
+ * mark the CPLB as dirty, to indicate that there are
+ * pending writes associated with the CPLB.
+ */
+
+ P4.L = (DCPLB_STATUS & 0xFFFF);
+ P4.H = (DCPLB_STATUS >> 16);
+ P3.L = (DCPLB_DATA0 & 0xFFFF);
+ P3.H = (DCPLB_DATA0 >> 16);
+ R5 = [P4];
+
+ /* A protection violation can be caused by more than just writes
+ * to a clean WB page, so we have to ensure that:
+ * - It's a write
+ * - to a clean WB page
+ * - and is allowed in the mode the access occurred.
+ */
+
+ CC = BITTST(R5, 16); /* ensure it was a write*/
+ IF !CC JUMP prot_violation;
+
+ /* to check the rest, we have to retrieve the DCPLB.*/
+
+ /* The low half of DCPLB_STATUS is a bit mask*/
+
+ R2 = R5.L (Z); /* indicating which CPLB triggered the event.*/
+ R3 = 30; /* so we can use this to determine the offset*/
+ R2.L = SIGNBITS R2;
+ R2 = R2.L (Z); /* into the DCPLB table.*/
+ R3 = R3 - R2;
+ P4 = R3;
+ P3 = P3 + (P4<<2);
+ R3 = [P3]; /* Retrieve the CPLB*/
+
+ /* Now we can check whether it's a clean WB page*/
+
+ CC = BITTST(R3, 14); /* 0==WB, 1==WT*/
+ IF CC JUMP prot_violation;
+ CC = BITTST(R3, 7); /* 0 == clean, 1 == dirty*/
+ IF CC JUMP prot_violation;
+
+ /* Check whether the write is allowed in the mode that was active.*/
+
+ R2 = 1<<3; /* checking write in user mode*/
+ CC = BITTST(R5, 17); /* 0==was user, 1==was super*/
+ R5 = CC;
+ R2 <<= R5; /* if was super, check write in super mode*/
+ R2 = R3 & R2;
+ CC = R2 == 0;
+ IF CC JUMP prot_violation;
+
+ /* It's a genuine write-to-clean-page.*/
+
+ BITSET(R3, 7); /* mark as dirty*/
+ [P3] = R3; /* and write back.*/
+ CSYNC;
+ ( R7:0,P5:0 ) = [SP++];
+ R0 = CPLB_RELOADED;
+ RTS;
+
+dcplb_miss_compare:
+
+ /* Data CPLB Miss event. We need to choose a CPLB to
+ * evict, and then locate a new CPLB to install from the
+ * config table, that covers the faulting address.
+ */
+
+ P1.L = (DCPLB_DATA15 & 0xFFFF);
+ P1.H = (DCPLB_DATA15 >> 16);
+
+ P4.L = (DCPLB_FAULT_ADDR & 0xFFFF);
+ P4.H = (DCPLB_FAULT_ADDR >> 16);
+ R4 = [P4];
+ I0 = R4;
+
+ /* The replacement procedure for DCPLBs*/
+
+ R6 = R1; /* Save for later*/
+
+ /* Turn off CPLBs while we work.*/
+ P4.L = (DMEM_CONTROL & 0xFFFF);
+ P4.H = (DMEM_CONTROL >> 16);
+ R5 = [P4];
+ BITCLR(R5,ENDCPLB_P);
+ CLI R0;
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R0;
+
+ /* Start looking for a CPLB to evict. Our order of preference
+ * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs
+ * are no good.
+ */
+
+ I1.L = (DCPLB_DATA0 & 0xFFFF);
+ I1.H = (DCPLB_DATA0 >> 16);
+ P1 = 3;
+ P2 = 16;
+ I2.L = dcplb_preference;
+ I2.H = dcplb_preference;
+ LSETUP(sdsearch1, edsearch1) LC0 = P1;
+sdsearch1:
+ R0 = [I2++]; /* Get the bits we're interested in*/
+ P0 = I1; /* Go back to start of table*/
+ LSETUP (sdsearch2, edsearch2) LC1 = P2;
+sdsearch2:
+ R1 = [P0++]; /* Fetch each installed CPLB in turn*/
+ R2 = R1 & R0; /* and test for interesting bits.*/
+ CC = R2 == 0; /* If none are set, it'll do.*/
+ IF !CC JUMP skip_stack_check;
+
+ R2 = [P0 - 0x104]; /* R2 - PageStart */
+ P3.L = page_size_table; /* retrive end address */
+ P3.H = page_size_table; /* retrive end address */
+ R3 = 0x2; /* 0th - position, 2 bits -length */
+ nop; /*Anamoly 05000209*/
+ R7 = EXTRACT(R1,R3.l);
+ R7 = R7 << 2; /* Page size index offset */
+ P5 = R7;
+ P3 = P3 + P5;
+ R7 = [P3]; /* page size in 1K bytes */
+
+ R7 = R7 << 0xA; /* in bytes * 1024*/
+ R7 = R2 + R7; /* R7 - PageEnd */
+ R4 = SP; /* Test SP is in range */
+
+ CC = R7 < R4; /* if PageEnd < SP */
+ IF CC JUMP dfound_victim;
+ R3 = 0x284; /* stack length from start of trap till the point */
+ /* 20 stack locations for future modifications */
+ R4 = R4 + R3;
+ CC = R4 < R2; /* if SP + stacklen < PageStart */
+ IF CC JUMP dfound_victim;
+skip_stack_check:
+
+edsearch2: NOP;
+edsearch1: NOP;
+
+ /* If we got here, we didn't find a DCPLB we considered
+ * replacable, which means all of them were locked.
+ */
+
+ JUMP all_locked;
+dfound_victim:
+
+#ifdef CONFIG_CPLB_INFO
+ R1 = [P0 - 0x104];
+ P2.L = dpdt_table;
+ P2.H = dpdt_table;
+ P3.L = dpdt_swapcount_table;
+ P3.H = dpdt_swapcount_table;
+ P3 += -4;
+dicount:
+ R2 = [P2];
+ P2 += 8;
+ P3 += 8;
+ CC = R2==-1;
+ IF CC JUMP dicount_done;
+ CC = R1==R2;
+ IF !CC JUMP dicount;
+ R1 = [P3];
+ R1 += 1;
+ [P3] = R1;
+ CSYNC;
+dicount_done:
+#endif
+
+ /* Clean down the hardware loops*/
+ R2 = 0;
+ LC1 = R2;
+ LC0 = R2;
+
+ /* There's a suitable victim in [P0-4] (because we've
+ * advanced already). If it's a valid dirty write-back
+ * CPLB, we need to flush the pending writes first.
+ */
+
+ CC = BITTST(R1, 0); /* Is it valid?*/
+ IF !CC JUMP Ddoverwrite;/* nope.*/
+ CC = BITTST(R1, 7); /* Is it dirty?*/
+ IF !CC JUMP Ddoverwrite (BP); /* Nope.*/
+ CC = BITTST(R1, 14); /* Is it Write-Through?*/
+ IF CC JUMP Ddoverwrite; /* Yep*/
+
+ /* This is a dirty page, so we need to flush all writes
+ * that are pending on the page.
+ */
+
+ /* Retrieve the page start address*/
+ R0 = [P0 - 0x104];
+ [--sp] = rets;
+ CALL dcplb_flush; /* R0==CPLB addr, R1==CPLB data*/
+ rets = [sp++];
+Ddoverwrite:
+
+ /* [P0-4] is a suitable victim CPLB, so we want to
+ * overwrite it by moving all the following CPLBs
+ * one space closer to the start.
+ */
+
+ R1.L = ((DCPLB_DATA15+4) & 0xFFFF); /*DCPLB_DATA15+4*/
+ R1.H = ((DCPLB_DATA15+4) >> 16);
+ R0 = P0;
+
+ /* If the victim happens to be in DCPLB15,
+ * we don't need to move anything.
+ */
+
+ CC = R1 == R0;
+ IF CC JUMP de_moved;
+ R1 = R1 - R0;
+ R1 >>= 2;
+ P1 = R1;
+ LSETUP(ds_move, de_move) LC0=P1;
+ds_move:
+ R0 = [P0++]; /* move data */
+ [P0 - 8] = R0;
+ R0 = [P0-0x104] /* move address */
+de_move: [P0-0x108] = R0;
+
+ /* We've now made space in DCPLB15 for the new CPLB to be
+ * installed. The next stage is to locate a CPLB in the
+ * config table that covers the faulting address.
+ */
+
+de_moved:NOP;
+ R0 = I0; /* Our faulting address */
+
+ P2.L = dpdt_table;
+ P2.H = dpdt_table;
+#ifdef CONFIG_CPLB_INFO
+ P3.L = dpdt_swapcount_table;
+ P3.H = dpdt_swapcount_table;
+ P3 += -8;
+#endif
+
+ P1.L = page_size_table;
+ P1.H = page_size_table;
+
+ /* An extraction pattern, to retrieve bits 17:16.*/
+
+ R1 = (16<<8)|2;
+dnext: R4 = [P2++]; /* address */
+ R2 = [P2++]; /* data */
+#ifdef CONFIG_CPLB_INFO
+ P3 += 8;
+#endif
+
+ CC = R4 == -1;
+ IF CC JUMP no_page_in_table;
+
+ /* See if failed address > start address */
+ CC = R4 <= R0(IU);
+ IF !CC JUMP dnext;
+
+ /* extract page size (17:16)*/
+ R3 = EXTRACT(R2, R1.L) (Z);
+
+ /* add page size to addr to get range */
+
+ P5 = R3;
+ P5 = P1 + (P5 << 2);
+ R3 = [P5];
+ R3 = R3 + R4;
+
+ /* See if failed address < (start address + page size) */
+ CC = R0 < R3(IU);
+ IF !CC JUMP dnext;
+
+ /* We've found the CPLB that should be installed, so
+ * write it into CPLB15, masking off any caching bits
+ * if necessary.
+ */
+
+ P1.L = (DCPLB_DATA15 & 0xFFFF);
+ P1.H = (DCPLB_DATA15 >> 16);
+
+ /* If the DCPLB has cache bits set, but caching hasn't
+ * been enabled, then we want to mask off the cache-in-L1
+ * bit before installing. Moreover, if caching is off, we
+ * also want to ensure that the DCPLB has WT mode set, rather
+ * than WB, since WB pages still trigger first-write exceptions
+ * even when not caching is off, and the page isn't marked as
+ * cachable. Finally, we could mark the page as clean, not dirty,
+ * but we choose to leave that decision to the user; if the user
+ * chooses to have a CPLB pre-defined as dirty, then they always
+ * pay the cost of flushing during eviction, but don't pay the
+ * cost of first-write exceptions to mark the page as dirty.
+ */
+
+#ifdef CONFIG_BLKFIN_WT
+ BITSET(R6, 14); /* Set WT*/
+#endif
+
+ [P1] = R2;
+ [P1-0x100] = R4;
+#ifdef CONFIG_CPLB_INFO
+ R3 = [P3];
+ R3 += 1;
+ [P3] = R3;
+#endif
+
+ /* We've installed the CPLB, so re-enable CPLBs. P4
+ * points to DMEM_CONTROL, and R5 is the value we
+ * last wrote to it, when we were disabling CPLBs.
+ */
+
+ BITSET(R5,ENDCPLB_P);
+ CLI R2;
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R2;
+
+ ( R7:0,P5:0 ) = [SP++];
+ R0 = CPLB_RELOADED;
+ RTS;
+
+.data
+.align 4;
+page_size_table:
+.byte4 0x00000400; /* 1K */
+.byte4 0x00001000; /* 4K */
+.byte4 0x00100000; /* 1M */
+.byte4 0x00400000; /* 4M */
+
+.align 4;
+dcplb_preference:
+.byte4 0x00000001; /* valid bit */
+.byte4 0x00000082; /* dirty+lock bits */
+.byte4 0x00000002; /* lock bit */