Blackfin: unify cpu and boot modes

All of the duplicated code for Blackfin processors and boot modes have been
unified.  After all, the core is the same for all processors, just the
peripheral set differs (which gets handled in the drivers).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 0 insertions, 77 deletions

diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h
deleted file mode 100644
index 9970b72..0000000
--- a/cpu/bf533/bf533_serial.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * U-boot - bf533_serial.h Serial Driver defines
- *
- * Copyright (c) 2005-2007 Analog Devices Inc.
- *
- * This file is based on
- * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
- * Copyright (C) 2003	Bas Vermeulen <bas@buyways.nl>
- * 			BuyWays B.V. (www.buyways.nl)
- *
- * Based heavily on:
- * blkfinserial.h: Definitions for the BlackFin DSP serial driver.
- *
- * Copyright (C) 2001	Tony Z. Kou	tonyko@arcturusnetworks.com
- * Copyright (C) 2001   Arcturus Networks Inc. <www.arcturusnetworks.com>
- *
- * Based on code from 68328serial.c which was:
- * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
- * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
- * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#ifndef _Bf533_SERIAL_H
-#define _Bf533_SERIAL_H
-
-#include <linux/config.h>
-#include <asm/blackfin.h>
-
-#define SYNC_ALL	__asm__ __volatile__ ("ssync;\n")
-#define ACCESS_LATCH	*pUART_LCR |= DLAB;
-#define ACCESS_PORT_IER	*pUART_LCR &= (~DLAB);
-
-void serial_setbrg(void);
-static void local_put_char(char ch);
-void calc_baud(void);
-void serial_setbrg(void);
-int serial_init(void);
-void serial_putc(const char c);
-int serial_tstc(void);
-int serial_getc(void);
-void serial_puts(const char *s);
-static void local_put_char(char ch);
-
-int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 };
-
-struct {
-	unsigned char dl_high;
-	unsigned char dl_low;
-} hw_baud_table[5];
-
-#ifdef CONFIG_STAMP
-extern unsigned long pll_div_fact;
-#endif
-
-#endif