Merge branch 'master' of /home/stefan/git/u-boot/u-boot

10 files changed, 62 insertions, 62 deletions

diff --git a/cpu/arm926ejs/at91/spi.c b/cpu/arm926ejs/at91/spi.c
index c9fe6d8..3eb252c 100644
--- a/cpu/arm926ejs/at91/spi.c
+++ b/cpu/arm926ejs/at91/spi.c
@@ -48,7 +48,7 @@ void AT91F_SpiInit(void)
 	       ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8),
 	       AT91_BASE_SPI + AT91_SPI_CSR(0));
 
-#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS1
+#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1
 	/* Configure CS1 */
 	writel(AT91_SPI_NCPHA |
 	       (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
@@ -57,7 +57,7 @@ void AT91F_SpiInit(void)
 	       AT91_BASE_SPI + AT91_SPI_CSR(1));
 #endif
 
-#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS3
+#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3
 	/* Configure CS3 */
 	writel(AT91_SPI_NCPHA |
 	       (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
@@ -144,11 +144,11 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
 
 	writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR);
 	while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) &&
-		((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT));
+		((timeout = get_timer_masked()) < CONFIG_SYS_SPI_WRITE_TOUT));
 	writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
 	pDesc->state = IDLE;
 
-	if (timeout >= CFG_SPI_WRITE_TOUT) {
+	if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT) {
 		printf("Error Timeout\n\r");
 		return DATAFLASH_ERROR;
 	}
diff --git a/cpu/arm926ejs/at91/timer.c b/cpu/arm926ejs/at91/timer.c
index c79ec7e..fec545b 100644
--- a/cpu/arm926ejs/at91/timer.c
+++ b/cpu/arm926ejs/at91/timer.c
@@ -130,7 +130,7 @@ ulong get_tbclk(void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
 
diff --git a/cpu/arm926ejs/at91/usb.c b/cpu/arm926ejs/at91/usb.c
index 2a92f73..7cb082d 100644
--- a/cpu/arm926ejs/at91/usb.c
+++ b/cpu/arm926ejs/at91/usb.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 
 #include <asm/arch/hardware.h>
 #include <asm/arch/io.h>
@@ -59,4 +59,4 @@ int usb_cpu_init_fail(void)
 	return usb_cpu_stop();
 }
 
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm926ejs/cpu.c b/cpu/arm926ejs/cpu.c
index 56c6289..48a2c0b 100644
--- a/cpu/arm926ejs/cpu.c
+++ b/cpu/arm926ejs/cpu.c
@@ -95,7 +95,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/arm926ejs/davinci/i2c.c b/cpu/arm926ejs/davinci/i2c.c
index af9dc03..d220a4c 100644
--- a/cpu/arm926ejs/davinci/i2c.c
+++ b/cpu/arm926ejs/davinci/i2c.c
@@ -104,7 +104,7 @@ void i2c_init(int speed, int slaveadd)
 	}
 
 	psc = 2;
-	div = (CFG_HZ_CLOCK / ((psc + 1) * speed)) - 10;	/* SCLL + SCLH */
+	div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10;	/* SCLL + SCLH */
 	REG(I2C_PSC) = psc;			/* 27MHz / (2 + 1) = 9MHz */
 	REG(I2C_SCLL) = (div * 50) / 100;	/* 50% Duty */
 	REG(I2C_SCLH) = div - REG(I2C_SCLL);
diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c
index f7cf0c9..014e2b0 100644
--- a/cpu/arm926ejs/davinci/nand.c
+++ b/cpu/arm926ejs/davinci/nand.c
@@ -44,14 +44,14 @@
 #include <common.h>
 #include <asm/io.h>
 
-#ifdef CFG_USE_NAND
+#ifdef CONFIG_SYS_USE_NAND
 #if !defined(CONFIG_NAND_LEGACY)
 
 #include <nand.h>
 #include <asm/arch/nand_defs.h>
 #include <asm/arch/emif_defs.h>
 
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 
 static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
@@ -87,11 +87,11 @@ static void nand_davinci_select_chip(struct mtd_info *mtd, int chip)
 #endif
 }
 
-#ifdef CFG_NAND_HW_ECC
-#ifdef CFG_DAVINCI_BROKEN_ECC
+#ifdef CONFIG_SYS_NAND_HW_ECC
+#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
 /* Linux-compatible ECC uses MTD defaults. */
 /* These layouts are not compatible with Linux or RBL/UBL. */
-#ifdef CFG_NAND_LARGEPAGE
+#ifdef CONFIG_SYS_NAND_LARGEPAGE
 static struct nand_ecclayout davinci_nand_ecclayout = {
 	.eccbytes = 12,
 	.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
@@ -103,7 +103,7 @@ static struct nand_ecclayout davinci_nand_ecclayout = {
 		{.offset = 60, .length = 4}
 	}
 };
-#elif defined(CFG_NAND_SMALLPAGE)
+#elif defined(CONFIG_SYS_NAND_SMALLPAGE)
 static struct nand_ecclayout davinci_nand_ecclayout = {
 	.eccbytes = 3,
 	.eccpos = {0, 1, 2},
@@ -113,9 +113,9 @@ static struct nand_ecclayout davinci_nand_ecclayout = {
 	}
 };
 #else
-#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!"
+#error "Either CONFIG_SYS_NAND_LARGEPAGE or CONFIG_SYS_NAND_SMALLPAGE must be defined!"
 #endif
-#endif /* CFG_DAVINCI_BROKEN_ECC */
+#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
 
 static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
 {
@@ -154,7 +154,7 @@ static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region)
 static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
 {
 	u_int32_t		tmp;
-#ifdef CFG_DAVINCI_BROKEN_ECC
+#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
 	/*
 	 * This is not how you should read ECCs on large page Davinci devices.
 	 * The region parameter gets you ECCs for flash chips on different chip
@@ -191,11 +191,11 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
 	*ecc_code++ = tmp;
 	*ecc_code++ = tmp >>  8;
 	*ecc_code++ = tmp >> 16;
-#endif /* CFG_DAVINCI_BROKEN_ECC */
+#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
 	return(0);
 }
 
-#ifdef CFG_DAVINCI_BROKEN_ECC
+#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
 static void nand_davinci_gen_true_ecc(u_int8_t *ecc_buf)
 {
 	u_int32_t	tmp = ecc_buf[0] | (ecc_buf[1] << 16) | ((ecc_buf[2] & 0xf0) << 20) | ((ecc_buf[2] & 0x0f) << 8);
@@ -312,12 +312,12 @@ static int nand_davinci_compare_ecc(u_int8_t *ecc_nand, u_int8_t *ecc_calc, u_in
 			return(-1);
 	}
 }
-#endif /* CFG_DAVINCI_BROKEN_ECC */
+#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
 
 static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
 {
 	struct nand_chip *this = mtd->priv;
-#ifdef CFG_DAVINCI_BROKEN_ECC
+#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
 	int			block_count = 0, i, rc;
 
 	block_count = (this->ecc.size/512);
@@ -366,10 +366,10 @@ static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *
 			return -1;
 		}
 	}
-#endif /* CFG_DAVINCI_BROKEN_ECC */
+#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
 	return(0);
 }
-#endif /* CFG_NAND_HW_ECC */
+#endif /* CONFIG_SYS_NAND_HW_ECC */
 
 static int nand_davinci_dev_ready(struct mtd_info *mtd)
 {
@@ -431,32 +431,32 @@ int board_nand_init(struct nand_chip *nand)
 	nand->IO_ADDR_W   = (void  __iomem *)NAND_CE0DATA;
 	nand->chip_delay  = 0;
 	nand->select_chip = nand_davinci_select_chip;
-#ifdef CFG_NAND_USE_FLASH_BBT
+#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
 	nand->options	  = NAND_USE_FLASH_BBT;
 #endif
-#ifdef CFG_NAND_HW_ECC
+#ifdef CONFIG_SYS_NAND_HW_ECC
 	nand->ecc.mode = NAND_ECC_HW;
-#ifdef CFG_DAVINCI_BROKEN_ECC
+#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
 	nand->ecc.layout  = &davinci_nand_ecclayout;
-#ifdef CFG_NAND_LARGEPAGE
+#ifdef CONFIG_SYS_NAND_LARGEPAGE
 	nand->ecc.size = 2048;
 	nand->ecc.bytes = 12;
-#elif defined(CFG_NAND_SMALLPAGE)
+#elif defined(CONFIG_SYS_NAND_SMALLPAGE)
 	nand->ecc.size = 512;
 	nand->ecc.bytes = 3;
 #else
-#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!"
+#error "Either CONFIG_SYS_NAND_LARGEPAGE or CONFIG_SYS_NAND_SMALLPAGE must be defined!"
 #endif
 #else
 	nand->ecc.size = 512;
 	nand->ecc.bytes = 3;
-#endif /* CFG_DAVINCI_BROKEN_ECC */
+#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
 	nand->ecc.calculate = nand_davinci_calculate_ecc;
 	nand->ecc.correct  = nand_davinci_correct_data;
 	nand->ecc.hwctl  = nand_davinci_enable_hwecc;
 #else
 	nand->ecc.mode = NAND_ECC_SOFT;
-#endif /* CFG_NAND_HW_ECC */
+#endif /* CONFIG_SYS_NAND_HW_ECC */
 
 	/* Set address of hardware control function */
 	nand->cmd_ctrl = nand_davinci_hwcontrol;
@@ -472,4 +472,4 @@ int board_nand_init(struct nand_chip *nand)
 #else
 #error "U-Boot legacy NAND support not available for DaVinci chips"
 #endif
-#endif	/* CFG_USE_NAND */
+#endif	/* CONFIG_SYS_USE_NAND */
diff --git a/cpu/arm926ejs/davinci/timer.c b/cpu/arm926ejs/davinci/timer.c
index 6c670f0..773735a 100644
--- a/cpu/arm926ejs/davinci/timer.c
+++ b/cpu/arm926ejs/davinci/timer.c
@@ -54,9 +54,9 @@ typedef volatile struct {
 	u_int32_t	wdtcr;
 } davinci_timer;
 
-davinci_timer		*timer = (davinci_timer *)CFG_TIMERBASE;
+davinci_timer		*timer = (davinci_timer *)CONFIG_SYS_TIMERBASE;
 
-#define TIMER_LOAD_VAL	(CFG_HZ_CLOCK / CFG_HZ)
+#define TIMER_LOAD_VAL	(CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)
 #define TIM_CLK_DIV	16
 
 static ulong timestamp;
@@ -117,7 +117,7 @@ void udelay(unsigned long usec)
 	ulong endtime;
 	signed long diff;
 
-	tmo = CFG_HZ_CLOCK / 1000;
+	tmo = CONFIG_SYS_HZ_CLOCK / 1000;
 	tmo *= usec;
 	tmo /= (1000 * TIM_CLK_DIV);
 
@@ -144,5 +144,5 @@ unsigned long long get_ticks(void)
  */
 ulong get_tbclk(void)
 {
-	return CFG_HZ;
+	return CONFIG_SYS_HZ;
 }
diff --git a/cpu/arm926ejs/omap/timer.c b/cpu/arm926ejs/omap/timer.c
index a2a9133..49e74ab 100644
--- a/cpu/arm926ejs/omap/timer.c
+++ b/cpu/arm926ejs/omap/timer.c
@@ -41,7 +41,7 @@
 #define TIMER_LOAD_VAL 0xffffffff
 
 /* macro to read the 32 bit timer */
-#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+8))
+#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+8))
 
 static ulong timestamp;
 static ulong lastdec;
@@ -51,9 +51,9 @@ int timer_init (void)
 	int32_t val;
 
 	/* Start the decrementer ticking down from 0xffffffff */
-	*((int32_t *) (CFG_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
-	val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CFG_PVT << MPUTIM_PTV_BIT);
-	*((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val;
+	*((int32_t *) (CONFIG_SYS_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
+	val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CONFIG_SYS_PVT << MPUTIM_PTV_BIT);
+	*((int32_t *) (CONFIG_SYS_TIMERBASE + CNTL_TIMER)) = val;
 
 	/* init the timestamp and lastdec value */
 	reset_timer_masked();
@@ -87,10 +87,10 @@ void udelay (unsigned long usec)
 
 	if(usec >= 1000){		/* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;		/* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;		/* finish normalize. */
 	}else{				/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -140,10 +140,10 @@ void udelay_masked (unsigned long usec)
 
 	if (usec >= 1000) {		/* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;		/* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;		/* finish normalize. */
 	} else {			/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -172,6 +172,6 @@ ulong get_tbclk (void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S
index a61fa18..ed4932a 100644
--- a/cpu/arm926ejs/start.S
+++ b/cpu/arm926ejs/start.S
@@ -165,8 +165,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -276,8 +276,8 @@ cpu_init_crit:
 	stmia	sp, {r0 - r12}	@ Save user registers (now in svc mode) r0-r12
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 	@ get values for "aborted" pc and cpsr (into parm regs)
 	ldmia	r2, {r2 - r3}
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
@@ -310,8 +310,8 @@ cpu_init_crit:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]	@ save caller lr in position 0 of saved stack
 	mrs	lr, spsr	@ get the spsr
diff --git a/cpu/arm926ejs/versatile/timer.c b/cpu/arm926ejs/versatile/timer.c
index f01f318..9ac867e 100755
--- a/cpu/arm926ejs/versatile/timer.c
+++ b/cpu/arm926ejs/versatile/timer.c
@@ -41,7 +41,7 @@
 #define TIMER_LOAD_VAL 0xffffffff
 
 /* macro to read the 32 bit timer */
-#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+4))
+#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4))
 
 static ulong timestamp;
 static ulong lastdec;
@@ -62,9 +62,9 @@ int timer_init (void)
 	ulong	tmr_ctrl_val;
 
 	/* 1st disable the Timer */
-	tmr_ctrl_val = *(volatile ulong *)(CFG_TIMERBASE + 8);
+	tmr_ctrl_val = *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8);
 	tmr_ctrl_val &= ~TIMER_ENABLE;
-	*(volatile ulong *)(CFG_TIMERBASE + 8) = tmr_ctrl_val;
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = tmr_ctrl_val;
 
 	/*
 	 * The Timer Control Register has one Undefined/Shouldn't Use Bit
@@ -78,11 +78,11 @@ int timer_init (void)
 	 * Tmr Siz : 16 Bit Counter
 	 * Tmr in Wrapping Mode
 	 */
-	tmr_ctrl_val = *(volatile ulong *)(CFG_TIMERBASE + 8);
+	tmr_ctrl_val = *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8);
 	tmr_ctrl_val &= ~(TIMER_MODE_MSK | TIMER_INT_EN | TIMER_PRS_MSK | TIMER_SIZE_MSK | TIMER_ONE_SHT );
 	tmr_ctrl_val |= (TIMER_ENABLE | TIMER_PRS_8S);
 
-	*(volatile ulong *)(CFG_TIMERBASE + 8) = tmr_ctrl_val;
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = tmr_ctrl_val;
 
 	/* init the timestamp and lastdec value */
 	reset_timer_masked();
@@ -116,10 +116,10 @@ void udelay (unsigned long usec)
 
 	if(usec >= 1000){		/* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;		/* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;		/* finish normalize. */
 	}else{				/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -169,10 +169,10 @@ void udelay_masked (unsigned long usec)
 
 	if (usec >= 1000) {		/* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;		/* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;		/* finish normalize. */
 	} else {			/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -201,6 +201,6 @@ ulong get_tbclk (void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }