Move at91cap9 specific files to at91sam9 directory

AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
common infrastructure can be used. Let this infrastructure be
named after the AT91SAM9 family, and move the existing AT91CAP9
files to the new place.

Signed-off-by: Stelian Pop <stelian@popies.net>

7 files changed, 5 insertions, 8 deletions

diff --git a/cpu/arm926ejs/at91cap9/Makefile b/cpu/arm926ejs/at91sam9/Makefile
index bf15e1e..bf15e1e 100644
--- a/cpu/arm926ejs/at91cap9/Makefile
+++ b/cpu/arm926ejs/at91sam9/Makefile
diff --git a/cpu/arm926ejs/at91cap9/config.mk b/cpu/arm926ejs/at91sam9/config.mk
index ca2cae1..ca2cae1 100644
--- a/cpu/arm926ejs/at91cap9/config.mk
+++ b/cpu/arm926ejs/at91sam9/config.mk
diff --git a/cpu/arm926ejs/at91cap9/ether.c b/cpu/arm926ejs/at91sam9/ether.c
index b7958d5..8de1bb7 100644
--- a/cpu/arm926ejs/at91cap9/ether.c
+++ b/cpu/arm926ejs/at91sam9/ether.c
@@ -23,12 +23,12 @@
  */
 
 #include <common.h>
-#include <asm/arch/AT91CAP9.h>
+#include <asm/arch/hardware.h>
 
 extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
 
 #if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
-void at91cap9_eth_initialize(bd_t *bi)
+void at91sam9_eth_initialize(bd_t *bi)
 {
 	macb_eth_initialize(0, (void *)AT91C_BASE_MACB, 0x00);
 }
diff --git a/cpu/arm926ejs/at91cap9/lowlevel_init.S b/cpu/arm926ejs/at91sam9/lowlevel_init.S
index 24d950c..40a3f6a 100644
--- a/cpu/arm926ejs/at91cap9/lowlevel_init.S
+++ b/cpu/arm926ejs/at91sam9/lowlevel_init.S
@@ -1,5 +1,5 @@
 /*
- * AT91CAP9 setup stuff
+ * AT91CAP9/SAM9 setup stuff
  *
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian.pop <at> leadtechdesign.com>
diff --git a/cpu/arm926ejs/at91cap9/spi.c b/cpu/arm926ejs/at91sam9/spi.c
index 0953820..0953820 100644
--- a/cpu/arm926ejs/at91cap9/spi.c
+++ b/cpu/arm926ejs/at91sam9/spi.c
diff --git a/cpu/arm926ejs/at91cap9/timer.c b/cpu/arm926ejs/at91sam9/timer.c
index c6df5bd..79c135f 100644
--- a/cpu/arm926ejs/at91cap9/timer.c
+++ b/cpu/arm926ejs/at91sam9/timer.c
@@ -26,7 +26,7 @@
 #include <asm/arch/hardware.h>
 
 /*
- * We're using the AT91CAP9 PITC in 32 bit mode, by
+ * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by
  * setting the 20 bit counter period to its maximum (0xfffff).
  */
 #define TIMER_LOAD_VAL	0xfffff
@@ -134,8 +134,7 @@ ulong get_tbclk(void)
 }
 
 /*
- * Reset the cpu by setting up the watchdog timer and let him time out
- * on the AT91CAP9ADK board
+ * Reset the cpu by setting up the watchdog timer and let him time out.
  */
 void reset_cpu(ulong ignored)
 {
diff --git a/cpu/arm926ejs/at91cap9/usb.c b/cpu/arm926ejs/at91sam9/usb.c
index 69da5f3..09292a6 100644
--- a/cpu/arm926ejs/at91cap9/usb.c
+++ b/cpu/arm926ejs/at91sam9/usb.c
@@ -24,7 +24,6 @@
 #include <common.h>
 
 #if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
-#ifdef CONFIG_AT91CAP9
 
 #include <asm/arch/hardware.h>
 
@@ -50,5 +49,4 @@ int usb_cpu_init_fail(void)
 	return usb_cpu_stop();
 }
 
-#endif /* CONFIG_AT91CAP9 */
 #endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */