arm: Move cpu/$CPU to arch/arm/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

5 files changed, 0 insertions, 742 deletions

diff --git a/cpu/arm926ejs/kirkwood/Makefile b/cpu/arm926ejs/kirkwood/Makefile
deleted file mode 100644
index fc2cc03..0000000
--- a/cpu/arm926ejs/kirkwood/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-# (C) Copyright 2009
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-# MA 02110-1301 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).a
-
-COBJS-y	= cpu.o
-COBJS-y	+= dram.o
-COBJS-y	+= mpp.o
-COBJS-y	+= timer.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/arm926ejs/kirkwood/cpu.c b/cpu/arm926ejs/kirkwood/cpu.c
deleted file mode 100644
index 6fc3902..0000000
--- a/cpu/arm926ejs/kirkwood/cpu.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/cache.h>
-#include <u-boot/md5.h>
-#include <asm/arch/kirkwood.h>
-#include <hush.h>
-
-#define BUFLEN	16
-
-void reset_cpu(unsigned long ignored)
-{
-	struct kwcpu_registers *cpureg =
-	    (struct kwcpu_registers *)KW_CPU_REG_BASE;
-
-	writel(readl(&cpureg->rstoutn_mask) | (1 << 2),
-		&cpureg->rstoutn_mask);
-	writel(readl(&cpureg->sys_soft_rst) | 1,
-		&cpureg->sys_soft_rst);
-	while (1) ;
-}
-
-/*
- * Generates Ramdom hex number reading some time varient system registers
- * and using md5 algorithm
- */
-unsigned char get_random_hex(void)
-{
-	int i;
-	u32 inbuf[BUFLEN];
-	u8 outbuf[BUFLEN];
-
-	/*
-	 * in case of 88F6281/88F6192 A0,
-	 * Bit7 need to reset to generate random values in KW_REG_UNDOC_0x1470
-	 * Soc reg offsets KW_REG_UNDOC_0x1470 and KW_REG_UNDOC_0x1478 are reserved regs and
-	 * Does not have names at this moment (no errata available)
-	 */
-	writel(readl(KW_REG_UNDOC_0x1478) & ~(1 << 7), KW_REG_UNDOC_0x1478);
-	for (i = 0; i < BUFLEN; i++) {
-		inbuf[i] = readl(KW_REG_UNDOC_0x1470);
-	}
-	md5((u8 *) inbuf, (BUFLEN * sizeof(u32)), outbuf);
-	return outbuf[outbuf[7] % 0x0f];
-}
-
-/*
- * Window Size
- * Used with the Base register to set the address window size and location.
- * Must be programmed from LSB to MSB as sequence of ones followed by
- * sequence of zeros. The number of ones specifies the size of the window in
- * 64 KByte granularity (e.g., a value of 0x00FF specifies 256 = 16 MByte).
- * NOTE: A value of 0x0 specifies 64-KByte size.
- */
-unsigned int kw_winctrl_calcsize(unsigned int sizeval)
-{
-	int i;
-	unsigned int j = 0;
-	u32 val = sizeval >> 1;
-
-	for (i = 0; val > 0x10000; i++) {
-		j |= (1 << i);
-		val = val >> 1;
-	}
-	return (0x0000ffff & j);
-}
-
-/*
- * kw_config_adr_windows - Configure address Windows
- *
- * There are 8 address windows supported by Kirkwood Soc to addess different
- * devices. Each window can be configured for size, BAR and remap addr
- * Below configuration is standard for most of the cases
- *
- * If remap function not used, remap_lo must be set as base
- *
- * Reference Documentation:
- * Mbus-L to Mbus Bridge Registers Configuration.
- * (Sec 25.1 and 25.3 of Datasheet)
- */
-int kw_config_adr_windows(void)
-{
-	struct kwwin_registers *winregs =
-		(struct kwwin_registers *)KW_CPU_WIN_BASE;
-
-	/* Window 0: PCIE MEM address space */
-	writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 256, KWCPU_TARGET_PCIE,
-		KWCPU_ATTR_PCIE_MEM, KWCPU_WIN_ENABLE), &winregs[0].ctrl);
-
-	writel(KW_DEFADR_PCI_MEM, &winregs[0].base);
-	writel(KW_DEFADR_PCI_MEM, &winregs[0].remap_lo);
-	writel(0x0, &winregs[0].remap_hi);
-
-	/* Window 1: PCIE IO address space */
-	writel(KWCPU_WIN_CTRL_DATA(1024 * 64, KWCPU_TARGET_PCIE,
-		KWCPU_ATTR_PCIE_IO, KWCPU_WIN_ENABLE), &winregs[1].ctrl);
-	writel(KW_DEFADR_PCI_IO, &winregs[1].base);
-	writel(KW_DEFADR_PCI_IO_REMAP, &winregs[1].remap_lo);
-	writel(0x0, &winregs[1].remap_hi);
-
-	/* Window 2: NAND Flash address space */
-	writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 128, KWCPU_TARGET_MEMORY,
-		KWCPU_ATTR_NANDFLASH, KWCPU_WIN_ENABLE), &winregs[2].ctrl);
-	writel(KW_DEFADR_NANDF, &winregs[2].base);
-	writel(KW_DEFADR_NANDF, &winregs[2].remap_lo);
-	writel(0x0, &winregs[2].remap_hi);
-
-	/* Window 3: SPI Flash address space */
-	writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 128, KWCPU_TARGET_MEMORY,
-		KWCPU_ATTR_SPIFLASH, KWCPU_WIN_ENABLE), &winregs[3].ctrl);
-	writel(KW_DEFADR_SPIF, &winregs[3].base);
-	writel(KW_DEFADR_SPIF, &winregs[3].remap_lo);
-	writel(0x0, &winregs[3].remap_hi);
-
-	/* Window 4: BOOT Memory address space */
-	writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 128, KWCPU_TARGET_MEMORY,
-		KWCPU_ATTR_BOOTROM, KWCPU_WIN_ENABLE), &winregs[4].ctrl);
-	writel(KW_DEFADR_BOOTROM, &winregs[4].base);
-
-	/* Window 5: Security SRAM address space */
-	writel(KWCPU_WIN_CTRL_DATA(1024 * 64, KWCPU_TARGET_SASRAM,
-		KWCPU_ATTR_SASRAM, KWCPU_WIN_ENABLE), &winregs[5].ctrl);
-	writel(KW_DEFADR_SASRAM, &winregs[5].base);
-
-	/* Window 6-7: Disabled */
-	writel(KWCPU_WIN_DISABLE, &winregs[6].ctrl);
-	writel(KWCPU_WIN_DISABLE, &winregs[7].ctrl);
-
-	return 0;
-}
-
-/*
- * kw_config_gpio - GPIO configuration
- */
-void kw_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val, u32 gpp0_oe, u32 gpp1_oe)
-{
-	struct kwgpio_registers *gpio0reg =
-		(struct kwgpio_registers *)KW_GPIO0_BASE;
-	struct kwgpio_registers *gpio1reg =
-		(struct kwgpio_registers *)KW_GPIO1_BASE;
-
-	/* Init GPIOS to default values as per board requirement */
-	writel(gpp0_oe_val, &gpio0reg->dout);
-	writel(gpp1_oe_val, &gpio1reg->dout);
-	writel(gpp0_oe, &gpio0reg->oe);
-	writel(gpp1_oe, &gpio1reg->oe);
-}
-
-/*
- * kw_config_mpp - Multi-Purpose Pins Functionality configuration
- *
- * Each MPP can be configured to different functionality through
- * MPP control register, ref (sec 6.1 of kirkwood h/w specification)
- *
- * There are maximum 64 Multi-Pourpose Pins on Kirkwood
- * Each MPP functionality can be configuration by a 4bit value
- * of MPP control reg, the value and associated functionality depends
- * upon used SoC varient
- */
-int kw_config_mpp(u32 mpp0_7, u32 mpp8_15, u32 mpp16_23, u32 mpp24_31,
-		u32 mpp32_39, u32 mpp40_47, u32 mpp48_55)
-{
-	u32 *mppreg = (u32 *) KW_MPP_BASE;
-
-	/* program mpp registers */
-	writel(mpp0_7, &mppreg[0]);
-	writel(mpp8_15, &mppreg[1]);
-	writel(mpp16_23, &mppreg[2]);
-	writel(mpp24_31, &mppreg[3]);
-	writel(mpp32_39, &mppreg[4]);
-	writel(mpp40_47, &mppreg[5]);
-	writel(mpp48_55, &mppreg[6]);
-	return 0;
-}
-
-/*
- * SYSRSTn Duration Counter Support
- *
- * Kirkwood SoC implements a hardware-based SYSRSTn duration counter.
- * When SYSRSTn is asserted low, a SYSRSTn duration counter is running.
- * The SYSRSTn duration counter is useful for implementing a manufacturer
- * or factory reset. Upon a long reset assertion that is greater than a
- * pre-configured environment variable value for sysrstdelay,
- * The counter value is stored in the SYSRSTn Length Counter Register
- * The counter is based on the 25-MHz reference clock (40ns)
- * It is a 29-bit counter, yielding a maximum counting duration of
- * 2^29/25 MHz (21.4 seconds). When the counter reach its maximum value,
- * it remains at this value until counter reset is triggered by setting
- * bit 31 of KW_REG_SYSRST_CNT
- */
-static void kw_sysrst_action(void)
-{
-	int ret;
-	char *s = getenv("sysrstcmd");
-
-	if (!s) {
-		debug("Error.. %s failed, check sysrstcmd\n",
-			__FUNCTION__);
-		return;
-	}
-
-	debug("Starting %s process...\n", __FUNCTION__);
-#if !defined(CONFIG_SYS_HUSH_PARSER)
-	ret = run_command (s, 0);
-#else
-	ret = parse_string_outer(s, FLAG_PARSE_SEMICOLON
-				  | FLAG_EXIT_FROM_LOOP);
-#endif
-	if (ret < 0)
-		debug("Error.. %s failed\n", __FUNCTION__);
-	else
-		debug("%s process finished\n", __FUNCTION__);
-}
-
-static void kw_sysrst_check(void)
-{
-	u32 sysrst_cnt, sysrst_dly;
-	char *s;
-
-	/*
-	 * no action if sysrstdelay environment variable is not defined
-	 */
-	s = getenv("sysrstdelay");
-	if (s == NULL)
-		return;
-
-	/* read sysrstdelay value */
-	sysrst_dly = (u32) simple_strtoul(s, NULL, 10);
-
-	/* read SysRst Length counter register (bits 28:0) */
-	sysrst_cnt = (0x1fffffff & readl(KW_REG_SYSRST_CNT));
-	debug("H/w Rst hold time: %d.%d secs\n",
-		sysrst_cnt / SYSRST_CNT_1SEC_VAL,
-		sysrst_cnt % SYSRST_CNT_1SEC_VAL);
-
-	/* clear the counter for next valid read*/
-	writel(1 << 31, KW_REG_SYSRST_CNT);
-
-	/*
-	 * sysrst_action:
-	 * if H/w Reset key is pressed and hold for time
-	 * more than sysrst_dly in seconds
-	 */
-	if (sysrst_cnt >= SYSRST_CNT_1SEC_VAL * sysrst_dly)
-		kw_sysrst_action();
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
-	char *name = "Unknown";
-
-	switch (readl(KW_REG_DEVICE_ID) & 0x03) {
-	case 1:
-		name = "88F6192_A0";
-		break;
-	case 2:
-		name = "88F6281_A0";
-		break;
-	default:
-		printf("SoC:   Unsupported Kirkwood\n");
-		return -1;
-	}
-	printf("SoC:   Kirkwood %s\n", name);
-	return 0;
-}
-#endif /* CONFIG_DISPLAY_CPUINFO */
-
-#ifdef CONFIG_ARCH_CPU_INIT
-int arch_cpu_init(void)
-{
-	u32 reg;
-	struct kwcpu_registers *cpureg =
-		(struct kwcpu_registers *)KW_CPU_REG_BASE;
-
-	/* Linux expects` the internal registers to be at 0xf1000000 */
-	writel(KW_REGS_PHY_BASE, KW_OFFSET_REG);
-
-	/* Enable and invalidate L2 cache in write through mode */
-	writel(readl(&cpureg->l2_cfg) | 0x18, &cpureg->l2_cfg);
-	invalidate_l2_cache();
-
-	kw_config_adr_windows();
-
-#ifdef CONFIG_KIRKWOOD_RGMII_PAD_1V8
-	/*
-	 * Configures the I/O voltage of the pads connected to Egigabit
-	 * Ethernet interface to 1.8V
-	 * By defult it is set to 3.3V
-	 */
-	reg = readl(KW_REG_MPP_OUT_DRV_REG);
-	reg |= (1 << 7);
-	writel(reg, KW_REG_MPP_OUT_DRV_REG);
-#endif
-#ifdef CONFIG_KIRKWOOD_EGIGA_INIT
-	/*
-	 * Set egiga port0/1 in normal functional mode
-	 * This is required becasue on kirkwood by default ports are in reset mode
-	 * OS egiga driver may not have provision to set them in normal mode
-	 * and if u-boot is build without network support, network may fail at OS level
-	 */
-	reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(0));
-	reg &= ~(1 << 4);	/* Clear PortReset Bit */
-	writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(0)));
-	reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(1));
-	reg &= ~(1 << 4);	/* Clear PortReset Bit */
-	writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(1)));
-#endif
-#ifdef CONFIG_KIRKWOOD_PCIE_INIT
-	/*
-	 * Enable PCI Express Port0
-	 */
-	reg = readl(&cpureg->ctrl_stat);
-	reg |= (1 << 0);	/* Set PEX0En Bit */
-	writel(reg, &cpureg->ctrl_stat);
-#endif
-	return 0;
-}
-#endif /* CONFIG_ARCH_CPU_INIT */
-
-/*
- * SOC specific misc init
- */
-#if defined(CONFIG_ARCH_MISC_INIT)
-int arch_misc_init(void)
-{
-	volatile u32 temp;
-
-	/*CPU streaming & write allocate */
-	temp = readfr_extra_feature_reg();
-	temp &= ~(1 << 28);	/* disable wr alloc */
-	writefr_extra_feature_reg(temp);
-
-	temp = readfr_extra_feature_reg();
-	temp &= ~(1 << 29);	/* streaming disabled */
-	writefr_extra_feature_reg(temp);
-
-	/* L2Cache settings */
-	temp = readfr_extra_feature_reg();
-	/* Disable L2C pre fetch - Set bit 24 */
-	temp |= (1 << 24);
-	/* enable L2C - Set bit 22 */
-	temp |= (1 << 22);
-	writefr_extra_feature_reg(temp);
-
-	icache_enable();
-	/* Change reset vector to address 0x0 */
-	temp = get_cr();
-	set_cr(temp & ~CR_V);
-
-	/* checks and execute resset to factory event */
-	kw_sysrst_check();
-
-	return 0;
-}
-#endif /* CONFIG_ARCH_MISC_INIT */
-
-#ifdef CONFIG_KIRKWOOD_EGIGA
-int cpu_eth_init(bd_t *bis)
-{
-	kirkwood_egiga_initialize(bis);
-	return 0;
-}
-#endif
diff --git a/cpu/arm926ejs/kirkwood/dram.c b/cpu/arm926ejs/kirkwood/dram.c
deleted file mode 100644
index 8f2a18a..0000000
--- a/cpu/arm926ejs/kirkwood/dram.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <config.h>
-#include <asm/arch/kirkwood.h>
-
-#define KW_REG_CPUCS_WIN_BAR(x)		(KW_REGISTER(0x1500) + (x * 0x08))
-#define KW_REG_CPUCS_WIN_SZ(x)		(KW_REGISTER(0x1504) + (x * 0x08))
-/*
- * kw_sdram_bar - reads SDRAM Base Address Register
- */
-u32 kw_sdram_bar(enum memory_bank bank)
-{
-	u32 result = 0;
-	u32 enable = 0x01 & readl(KW_REG_CPUCS_WIN_SZ(bank));
-
-	if ((!enable) || (bank > BANK3))
-		return 0;
-
-	result = readl(KW_REG_CPUCS_WIN_BAR(bank));
-	return result;
-}
-
-/*
- * kw_sdram_bs - reads SDRAM Bank size
- */
-u32 kw_sdram_bs(enum memory_bank bank)
-{
-	u32 result = 0;
-	u32 enable = 0x01 & readl(KW_REG_CPUCS_WIN_SZ(bank));
-
-	if ((!enable) || (bank > BANK3))
-		return 0;
-	result = 0xff000000 & readl(KW_REG_CPUCS_WIN_SZ(bank));
-	result += 0x01000000;
-	return result;
-}
diff --git a/cpu/arm926ejs/kirkwood/mpp.c b/cpu/arm926ejs/kirkwood/mpp.c
deleted file mode 100644
index b2f0ad5..0000000
--- a/cpu/arm926ejs/kirkwood/mpp.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/mpp.c
- *
- * MPP functions for Marvell Kirkwood SoCs
- * Referenced from Linux kernel source
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <common.h>
-#include <asm/arch/kirkwood.h>
-#include <asm/arch/mpp.h>
-
-static u32 kirkwood_variant(void)
-{
-	switch (readl(KW_REG_DEVICE_ID) & 0x03) {
-	case 1:
-		return MPP_F6192_MASK;
-	case 2:
-		return MPP_F6281_MASK;
-	default:
-		debug("MPP setup: unknown kirkwood variant\n");
-		return 0;
-	}
-}
-
-#define MPP_CTRL(i)	(KW_MPP_BASE + (i* 4))
-#define MPP_NR_REGS	(1 + MPP_MAX/8)
-
-void kirkwood_mpp_conf(u32 *mpp_list)
-{
-	u32 mpp_ctrl[MPP_NR_REGS];
-	unsigned int variant_mask;
-	int i;
-
-	variant_mask = kirkwood_variant();
-	if (!variant_mask)
-		return;
-
-	debug( "initial MPP regs:");
-	for (i = 0; i < MPP_NR_REGS; i++) {
-		mpp_ctrl[i] = readl(MPP_CTRL(i));
-		debug(" %08x", mpp_ctrl[i]);
-	}
-	debug("\n");
-
-
-	while (*mpp_list) {
-		unsigned int num = MPP_NUM(*mpp_list);
-		unsigned int sel = MPP_SEL(*mpp_list);
-		int shift;
-
-		if (num > MPP_MAX) {
-			debug("kirkwood_mpp_conf: invalid MPP "
-					"number (%u)\n", num);
-			continue;
-		}
-		if (!(*mpp_list & variant_mask)) {
-			debug("kirkwood_mpp_conf: requested MPP%u config "
-				"unavailable on this hardware\n", num);
-			continue;
-		}
-
-		shift = (num & 7) << 2;
-		mpp_ctrl[num / 8] &= ~(0xf << shift);
-		mpp_ctrl[num / 8] |= sel << shift;
-
-		mpp_list++;
-	}
-
-	debug("  final MPP regs:");
-	for (i = 0; i < MPP_NR_REGS; i++) {
-		writel(mpp_ctrl[i], MPP_CTRL(i));
-		debug(" %08x", mpp_ctrl[i]);
-	}
-	debug("\n");
-
-}
diff --git a/cpu/arm926ejs/kirkwood/timer.c b/cpu/arm926ejs/kirkwood/timer.c
deleted file mode 100644
index 2ec6a93..0000000
--- a/cpu/arm926ejs/kirkwood/timer.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) Marvell International Ltd. and its affiliates
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <common.h>
-#include <asm/arch/kirkwood.h>
-
-#define UBOOT_CNTR	0	/* counter to use for uboot timer */
-
-/* Timer reload and current value registers */
-struct kwtmr_val {
-	u32 reload;	/* Timer reload reg */
-	u32 val;	/* Timer value reg */
-};
-
-/* Timer registers */
-struct kwtmr_registers {
-	u32 ctrl;	/* Timer control reg */
-	u32 pad[3];
-	struct kwtmr_val tmr[2];
-	u32 wdt_reload;
-	u32 wdt_val;
-};
-
-struct kwtmr_registers *kwtmr_regs = (struct kwtmr_registers *)KW_TIMER_BASE;
-
-/*
- * ARM Timers Registers Map
- */
-#define CNTMR_CTRL_REG			&kwtmr_regs->ctrl
-#define CNTMR_RELOAD_REG(tmrnum)	&kwtmr_regs->tmr[tmrnum].reload
-#define CNTMR_VAL_REG(tmrnum)		&kwtmr_regs->tmr[tmrnum].val
-
-/*
- * ARM Timers Control Register
- * CPU_TIMERS_CTRL_REG (CTCR)
- */
-#define CTCR_ARM_TIMER_EN_OFFS(cntr)	(cntr * 2)
-#define CTCR_ARM_TIMER_EN_MASK(cntr)	(1 << CTCR_ARM_TIMER_EN_OFFS)
-#define CTCR_ARM_TIMER_EN(cntr)		(1 << CTCR_ARM_TIMER_EN_OFFS(cntr))
-#define CTCR_ARM_TIMER_DIS(cntr)	(0 << CTCR_ARM_TIMER_EN_OFFS(cntr))
-
-#define CTCR_ARM_TIMER_AUTO_OFFS(cntr)	((cntr * 2) + 1)
-#define CTCR_ARM_TIMER_AUTO_MASK(cntr)	(1 << 1)
-#define CTCR_ARM_TIMER_AUTO_EN(cntr)	(1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
-#define CTCR_ARM_TIMER_AUTO_DIS(cntr)	(0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
-
-/*
- * ARM Timer\Watchdog Reload Register
- * CNTMR_RELOAD_REG (TRR)
- */
-#define TRG_ARM_TIMER_REL_OFFS		0
-#define TRG_ARM_TIMER_REL_MASK		0xffffffff
-
-/*
- * ARM Timer\Watchdog Register
- * CNTMR_VAL_REG (TVRG)
- */
-#define TVR_ARM_TIMER_OFFS		0
-#define TVR_ARM_TIMER_MASK		0xffffffff
-#define TVR_ARM_TIMER_MAX		0xffffffff
-#define TIMER_LOAD_VAL 			0xffffffff
-
-#define READ_TIMER			(readl(CNTMR_VAL_REG(UBOOT_CNTR)) /	\
-					 (CONFIG_SYS_TCLK / 1000))
-
-static ulong timestamp;
-static ulong lastdec;
-
-void reset_timer_masked(void)
-{
-	/* reset time */
-	lastdec = READ_TIMER;
-	timestamp = 0;
-}
-
-ulong get_timer_masked(void)
-{
-	ulong now = READ_TIMER;
-
-	if (lastdec >= now) {
-		/* normal mode */
-		timestamp += lastdec - now;
-	} else {
-		/* we have an overflow ... */
-		timestamp += lastdec +
-			(TIMER_LOAD_VAL / (CONFIG_SYS_TCLK / 1000)) - now;
-	}
-	lastdec = now;
-
-	return timestamp;
-}
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-	timestamp = t;
-}
-
-void __udelay(unsigned long usec)
-{
-	uint current;
-	ulong delayticks;
-
-	current = readl(CNTMR_VAL_REG(UBOOT_CNTR));
-	delayticks = (usec * (CONFIG_SYS_TCLK / 1000000));
-
-	if (current < delayticks) {
-		delayticks -= current;
-		while (readl(CNTMR_VAL_REG(UBOOT_CNTR)) < current) ;
-		while ((TIMER_LOAD_VAL - delayticks) <
-			readl(CNTMR_VAL_REG(UBOOT_CNTR))) ;
-	} else {
-		while (readl(CNTMR_VAL_REG(UBOOT_CNTR)) >
-			(current - delayticks)) ;
-	}
-}
-
-/*
- * init the counter
- */
-int timer_init(void)
-{
-	unsigned int cntmrctrl;
-
-	/* load value into timer */
-	writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR));
-	writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR));
-
-	/* enable timer in auto reload mode */
-	cntmrctrl = readl(CNTMR_CTRL_REG);
-	cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR);
-	cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR);
-	writel(cntmrctrl, CNTMR_CTRL_REG);
-
-	/* init the timestamp and lastdec value */
-	reset_timer_masked();
-
-	return 0;
-}