summaryrefslogtreecommitdiff
path: root/cpu/arm926ejs/davinci
diff options
context:
space:
mode:
authorWilliam Juul <william.juul@datarespons.no>2007-10-31 13:53:06 +0100
committerScott Wood <scottwood@freescale.com>2008-08-12 11:31:15 -0500
commitcfa460adfdefcc30d104e1a9ee44994ee349bb7b (patch)
tree59400f96629aec9c968b0e3251628302824f5d35 /cpu/arm926ejs/davinci
parentcd82919e6c8a73b363a26f34b734923844e52d1c (diff)
downloadu-boot-imx-cfa460adfdefcc30d104e1a9ee44994ee349bb7b.zip
u-boot-imx-cfa460adfdefcc30d104e1a9ee44994ee349bb7b.tar.gz
u-boot-imx-cfa460adfdefcc30d104e1a9ee44994ee349bb7b.tar.bz2
Update MTD to that of Linux 2.6.22.1
A lot changed in the Linux MTD code, since it was last ported from Linux to U-Boot. This patch takes U-Boot NAND support to the level of Linux 2.6.22.1 and will enable support for very large NAND devices (4KB pages) and ease the compatibility between U-Boot and Linux filesystems. This patch is tested on two custom boards with PPC and ARM processors running YAFFS in U-Boot and Linux using gcc-4.1.2 cross compilers. MAKEALL ppc/arm has some issues: * DOC/OneNand/nand_spl is not building (I have not tried porting these parts, and since I do not have any HW and I am not familiar with this code/HW I think its best left to someone else.) Except for the issues mentioned above, I have ported all drivers necessary to run MAKEALL ppc/arm without errors and warnings. Many drivers were trivial to port, but some were not so trivial. The following drivers must be examined carefully and maybe rewritten to some degree: cpu/ppc4xx/ndfc.c cpu/arm926ejs/davinci/nand.c board/delta/nand.c board/zylonite/nand.c Signed-off-by: William Juul <william.juul@tandberg.com> Signed-off-by: Stig Olsen <stig.olsen@tandberg.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
Diffstat (limited to 'cpu/arm926ejs/davinci')
-rw-r--r--cpu/arm926ejs/davinci/nand.c41
1 files changed, 23 insertions, 18 deletions
diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c
index 36468e6..43041b6 100644
--- a/cpu/arm926ejs/davinci/nand.c
+++ b/cpu/arm926ejs/davinci/nand.c
@@ -42,6 +42,7 @@
*/
#include <common.h>
+#include <asm/io.h>
#ifdef CFG_USE_NAND
#if !defined(CFG_NAND_LEGACY)
@@ -52,23 +53,23 @@
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
-static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd)
+static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
u_int32_t IO_ADDR_W = (u_int32_t)this->IO_ADDR_W;
IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
- switch (cmd) {
- case NAND_CTL_SETCLE:
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_CLE )
IO_ADDR_W |= MASK_CLE;
- break;
- case NAND_CTL_SETALE:
+ if ( ctrl & NAND_ALE )
IO_ADDR_W |= MASK_ALE;
- break;
+ this->IO_ADDR_W = (void __iomem *) IO_ADDR_W;
}
- this->IO_ADDR_W = (void *)IO_ADDR_W;
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
/* Set WP on deselect, write enable on select */
@@ -145,7 +146,7 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
int region, n;
struct nand_chip *this = mtd->priv;
- n = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1;
+ n = (this->ecc.size/512);
region = 1;
while (n--) {
@@ -281,7 +282,7 @@ static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *
int block_count = 0, i, rc;
this = mtd->priv;
- block_count = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1;
+ block_count = (this->ecc.size/512);
for (i = 0; i < block_count; i++) {
if (memcmp(read_ecc, calc_ecc, 3) != 0) {
rc = nand_davinci_compare_ecc(read_ecc, calc_ecc, dat);
@@ -306,7 +307,7 @@ static int nand_davinci_dev_ready(struct mtd_info *mtd)
return(emif_addr->NANDFSR & 0x1);
}
-static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state)
+static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
{
while(!nand_davinci_dev_ready(mtd)) {;}
*NAND_CE0CLE = NAND_STATUS;
@@ -362,22 +363,26 @@ int board_nand_init(struct nand_chip *nand)
#endif
#ifdef CFG_NAND_HW_ECC
#ifdef CFG_NAND_LARGEPAGE
- nand->eccmode = NAND_ECC_HW12_2048;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.size = 2048;
+ nand->ecc.bytes = 12;
#elif defined(CFG_NAND_SMALLPAGE)
- nand->eccmode = NAND_ECC_HW3_512;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 3;
#else
#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!"
#endif
- nand->autooob = &davinci_nand_oobinfo;
- nand->calculate_ecc = nand_davinci_calculate_ecc;
- nand->correct_data = nand_davinci_correct_data;
- nand->enable_hwecc = nand_davinci_enable_hwecc;
+// nand->autooob = &davinci_nand_oobinfo;
+ nand->ecc.calculate = nand_davinci_calculate_ecc;
+ nand->ecc.correct = nand_davinci_correct_data;
+ nand->ecc.hwctl = nand_davinci_enable_hwecc;
#else
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
#endif
/* Set address of hardware control function */
- nand->hwcontrol = nand_davinci_hwcontrol;
+ nand->cmd_ctrl = nand_davinci_hwcontrol;
nand->dev_ready = nand_davinci_dev_ready;
nand->waitfunc = nand_davinci_waitfunc;