davinci: display correct clock info

Move the clock-rate dumping code into the cpu/.../davinci area
where it should have been, enabled by CONFIG_DISPLAY_CPUINFO,
updating the format and showing the DSP clock (where relevant).

Switch boards to use the cpuinfo() hook for this stuff.

Remove a few now-obsolete PLL #defines.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

1 files changed, 131 insertions, 0 deletions

diff --git a/cpu/arm926ejs/davinci/cpu.c b/cpu/arm926ejs/davinci/cpu.c
new file mode 100644
index 0000000..29aead6
--- /dev/null
+++ b/cpu/arm926ejs/davinci/cpu.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2004 Texas Instruments.
+ * Copyright (C) 2009 David Brownell
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+
+/* offsets from PLL controller base */
+#define PLLC_PLLCTL	0x100
+#define PLLC_PLLM	0x110
+#define PLLC_PREDIV	0x114
+#define PLLC_PLLDIV1	0x118
+#define PLLC_PLLDIV2	0x11c
+#define PLLC_PLLDIV3	0x120
+#define PLLC_POSTDIV	0x128
+#define PLLC_BPDIV	0x12c
+#define PLLC_PLLDIV4	0x160
+#define PLLC_PLLDIV5	0x164
+#define PLLC_PLLDIV6	0x168
+#define PLLC_PLLDIV8	0x170
+#define PLLC_PLLDIV9	0x174
+
+#define BIT(x)		(1 << (x))
+
+/* SOC-specific pll info */
+#ifdef CONFIG_SOC_DM355
+#define ARM_PLLDIV	PLLC_PLLDIV1
+#define DDR_PLLDIV	PLLC_PLLDIV1
+#endif
+
+#ifdef CONFIG_SOC_DM644X
+#define ARM_PLLDIV	PLLC_PLLDIV2
+#define DSP_PLLDIV	PLLC_PLLDIV1
+#define DDR_PLLDIV	PLLC_PLLDIV2
+#endif
+
+#ifdef CONFIG_SOC_DM6447
+#define ARM_PLLDIV	PLLC_PLLDIV2
+#define DSP_PLLDIV	PLLC_PLLDIV1
+#define DDR_PLLDIV	PLLC_PLLDIV1
+#endif
+
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+
+static unsigned pll_div(volatile void *pllbase, unsigned offset)
+{
+	u32	div;
+
+	div = REG(pllbase + offset);
+	return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1;
+}
+
+static inline unsigned pll_prediv(volatile void *pllbase)
+{
+#ifdef CONFIG_SOC_DM355
+	/* this register read seems to fail on pll0 */
+	if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
+		return 8;
+	else
+		return pll_div(pllbase, PLLC_PREDIV);
+#endif
+	return 1;
+}
+
+static inline unsigned pll_postdiv(volatile void *pllbase)
+{
+#ifdef CONFIG_SOC_DM355
+	return pll_div(pllbase, PLLC_POSTDIV);
+#elif defined(CONFIG_SOC_DM6446)
+	if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
+		return pll_div(pllbase, PLLC_POSTDIV);
+#endif
+	return 1;
+}
+
+static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div)
+{
+	volatile void	*pllbase = (volatile void *) pll_addr;
+	unsigned	base = CONFIG_SYS_HZ_CLOCK / 1000;
+
+	/* the PLL might be bypassed */
+	if (REG(pllbase + PLLC_PLLCTL) & BIT(0)) {
+		base /= pll_prediv(pllbase);
+		base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff);
+		base /= pll_postdiv(pllbase);
+	}
+	return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div));
+}
+
+int print_cpuinfo(void)
+{
+	/* REVISIT fetch and display CPU ID and revision information
+	 * too ... that will matter as more revisions appear.
+	 */
+	printf("Cores: ARM %d MHz",
+			pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV));
+
+#ifdef DSP_PLLDIV
+	printf(", DSP %d MHz",
+			pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV));
+#endif
+
+	printf("\nDDR:   %d MHz\n",
+			/* DDR PHY uses an x2 input clock */
+			pll_sysclk_mhz(DAVINCI_PLL_CNTRL1_BASE, DDR_PLLDIV)
+				/ 2);
+	return 0;
+}
+
+#endif
+