Merge git://www.denx.de/git/u-boot

Conflicts:

	CREDITS

1 files changed, 91 insertions, 2 deletions

diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 346f0d0..b9c364b 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -27,7 +27,9 @@
 
 #include <config.h>
 #include <version.h>
-
+#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
+#include	<led.h>
+#endif
 
 /*
  *************************************************************************
@@ -116,6 +118,69 @@ reset:
 	orr	r0,r0,#0xd3
 	msr	cpsr,r0
 
+#if	CONFIG_AT91RM9200
+#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
+	bl LED_init
+	bl red_LED_on
+#endif
+
+#ifdef CONFIG_BOOTBINFUNC
+/* code based on entry.S from ATMEL */
+#define AT91C_BASE_CKGR 0xFFFFFC20
+#define CKGR_MOR 0
+	/* Get the CKGR Base Address */
+	ldr     r1, =AT91C_BASE_CKGR
+
+/* Main oscillator Enable register	APMC_MOR : Enable main oscillator , OSCOUNT = 0xFF */
+/*	ldr 	r0, = AT91C_CKGR_MOSCEN:OR:AT91C_CKGR_OSCOUNT */
+	ldr 	r0, =0x0000FF01
+	str     r0, [r1, #CKGR_MOR]
+	/* Add loop to compensate Main Oscillator startup time */
+	ldr 	r0, =0x00000010
+LoopOsc:
+	subs    r0, r0, #1
+	bhi     LoopOsc
+	/* scratch stack */
+	ldr 	r1, =0x00204000
+	/* Insure word alignment */
+	bic     r1, r1, #3
+	/* Init stack SYS	 */
+	mov     sp, r1
+	/*
+	 * This does a lot more than just set up the memory, which
+	 * is why it's called lowlevelinit
+	 */
+	bl	lowlevelinit /* in memsetup.S */
+	bl	icache_enable;
+	/* ------------------------------------
+	 * Read/modify/write CP15 control register
+	 * -------------------------------------
+	 * read cp15 control register (cp15 r1) in r0
+	 * ------------------------------------
+	 */
+	mrc     p15, 0, r0, c1, c0, 0
+	/* Reset bit :Little Endian end fast bus mode */
+	ldr     r3, =0xC0000080
+	/* Set bit :Asynchronous clock mode, Not Fast Bus */
+	ldr     r4, =0xC0000000
+	bic     r0, r0, r3
+	orr     r0, r0, r4
+	/* write r0 in cp15 control register (cp15 r1) */
+	mcr     p15, 0, r0, c1, c0, 0
+#endif /* CONFIG_BOOTBINFUNC */
+	/*
+	 * relocate exeception table
+	 */
+	ldr	r0, =_start
+	ldr	r1, =0x0
+	mov	r2, #16
+copyex:
+	subs	r2, r2, #1
+	ldr	r3, [r0], #4
+	str	r3, [r1], #4
+	bne	copyex
+#endif
+
 /* turn off the watchdog */
 #if defined(CONFIG_S3C2400)
 # define pWTCON		0x15300000
@@ -160,6 +225,26 @@ reset:
 	bl	cpu_init_crit
 #endif
 
+#ifdef	CONFIG_AT91RM9200
+#ifdef CONFIG_BOOTBINFUNC
+relocate:				/* relocate U-Boot to RAM	    */
+	adr	r0, _start		/* r0 <- current position of code   */
+	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
+	cmp     r0, r1                  /* don't reloc during debug         */
+	beq     stack_setup
+
+	ldr	r2, _armboot_start
+	ldr	r3, _bss_start
+	sub	r2, r3, r2		/* r2 <- size of armboot            */
+	add	r2, r0, r2		/* r2 <- source end address         */
+
+copy_loop:
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
+	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
+	cmp	r0, r2			/* until source end addreee [r2]    */
+	ble	copy_loop
+#endif /* CONFIG_BOOTBINFUNC */
+#else
 #ifndef CONFIG_SKIP_RELOCATE_UBOOT
 relocate:				/* relocate U-Boot to RAM	    */
 	adr	r0, _start		/* r0 <- current position of code   */
@@ -178,7 +263,7 @@ copy_loop:
 	cmp	r0, r2			/* until source end addreee [r2]    */
 	ble	copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
+#endif
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
@@ -262,7 +347,11 @@ cpu_init_crit:
 	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip, lr
+#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
+
+#else
 	bl	lowlevel_init
+#endif
 	mov	lr, ip
 	mov	pc, lr
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */