summaryrefslogtreecommitdiff
path: root/cpu/arm920t/start.S
diff options
context:
space:
mode:
authorHaavard Skinnemoen <hskinnemoen@atmel.com>2007-10-02 19:05:53 +0200
committerHaavard Skinnemoen <hskinnemoen@atmel.com>2007-10-02 19:05:53 +0200
commitb90296fc39a33f84bb2b0aa79bf997be495ba791 (patch)
tree4ea0d61df25d10fe7552aedf781fd167f4c670fe /cpu/arm920t/start.S
parente80e585b00fbbab7ad1bf71619741f2c5b029ab7 (diff)
parent527c80f012030fa0b51f8594847ec56c9317e9b1 (diff)
downloadu-boot-imx-b90296fc39a33f84bb2b0aa79bf997be495ba791.zip
u-boot-imx-b90296fc39a33f84bb2b0aa79bf997be495ba791.tar.gz
u-boot-imx-b90296fc39a33f84bb2b0aa79bf997be495ba791.tar.bz2
Merge commit 'origin/master'
Diffstat (limited to 'cpu/arm920t/start.S')
-rw-r--r--cpu/arm920t/start.S93
1 files changed, 91 insertions, 2 deletions
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 346f0d0..b9c364b 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -27,7 +27,9 @@
#include <config.h>
#include <version.h>
-
+#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
+#include <led.h>
+#endif
/*
*************************************************************************
@@ -116,6 +118,69 @@ reset:
orr r0,r0,#0xd3
msr cpsr,r0
+#if CONFIG_AT91RM9200
+#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
+ bl LED_init
+ bl red_LED_on
+#endif
+
+#ifdef CONFIG_BOOTBINFUNC
+/* code based on entry.S from ATMEL */
+#define AT91C_BASE_CKGR 0xFFFFFC20
+#define CKGR_MOR 0
+ /* Get the CKGR Base Address */
+ ldr r1, =AT91C_BASE_CKGR
+
+/* Main oscillator Enable register APMC_MOR : Enable main oscillator , OSCOUNT = 0xFF */
+/* ldr r0, = AT91C_CKGR_MOSCEN:OR:AT91C_CKGR_OSCOUNT */
+ ldr r0, =0x0000FF01
+ str r0, [r1, #CKGR_MOR]
+ /* Add loop to compensate Main Oscillator startup time */
+ ldr r0, =0x00000010
+LoopOsc:
+ subs r0, r0, #1
+ bhi LoopOsc
+ /* scratch stack */
+ ldr r1, =0x00204000
+ /* Insure word alignment */
+ bic r1, r1, #3
+ /* Init stack SYS */
+ mov sp, r1
+ /*
+ * This does a lot more than just set up the memory, which
+ * is why it's called lowlevelinit
+ */
+ bl lowlevelinit /* in memsetup.S */
+ bl icache_enable;
+ /* ------------------------------------
+ * Read/modify/write CP15 control register
+ * -------------------------------------
+ * read cp15 control register (cp15 r1) in r0
+ * ------------------------------------
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ /* Reset bit :Little Endian end fast bus mode */
+ ldr r3, =0xC0000080
+ /* Set bit :Asynchronous clock mode, Not Fast Bus */
+ ldr r4, =0xC0000000
+ bic r0, r0, r3
+ orr r0, r0, r4
+ /* write r0 in cp15 control register (cp15 r1) */
+ mcr p15, 0, r0, c1, c0, 0
+#endif /* CONFIG_BOOTBINFUNC */
+ /*
+ * relocate exeception table
+ */
+ ldr r0, =_start
+ ldr r1, =0x0
+ mov r2, #16
+copyex:
+ subs r2, r2, #1
+ ldr r3, [r0], #4
+ str r3, [r1], #4
+ bne copyex
+#endif
+
/* turn off the watchdog */
#if defined(CONFIG_S3C2400)
# define pWTCON 0x15300000
@@ -160,6 +225,26 @@ reset:
bl cpu_init_crit
#endif
+#ifdef CONFIG_AT91RM9200
+#ifdef CONFIG_BOOTBINFUNC
+relocate: /* relocate U-Boot to RAM */
+ adr r0, _start /* r0 <- current position of code */
+ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
+ cmp r0, r1 /* don't reloc during debug */
+ beq stack_setup
+
+ ldr r2, _armboot_start
+ ldr r3, _bss_start
+ sub r2, r3, r2 /* r2 <- size of armboot */
+ add r2, r0, r2 /* r2 <- source end address */
+
+copy_loop:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
+ ble copy_loop
+#endif /* CONFIG_BOOTBINFUNC */
+#else
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
relocate: /* relocate U-Boot to RAM */
adr r0, _start /* r0 <- current position of code */
@@ -178,7 +263,7 @@ copy_loop:
cmp r0, r2 /* until source end addreee [r2] */
ble copy_loop
#endif /* CONFIG_SKIP_RELOCATE_UBOOT */
-
+#endif
/* Set up the stack */
stack_setup:
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
@@ -262,7 +347,11 @@ cpu_init_crit:
* find a lowlevel_init.S in your board directory.
*/
mov ip, lr
+#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
+
+#else
bl lowlevel_init
+#endif
mov lr, ip
mov pc, lr
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */