* Code cleanup

* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)

1 files changed, 0 insertions, 178 deletions

diff --git a/cpu/arm920t/serial.c b/cpu/arm920t/serial.c
deleted file mode 100644
index 1749e82..0000000
--- a/cpu/arm920t/serial.c
+++ /dev/null
@@ -1,178 +0,0 @@
-	/*
-	 * (C) Copyright 2002
-	 * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-	 *
-	 * This program is free software; you can redistribute it and/or modify
-	 * it under the terms of the GNU General Public License as published by
-	 * the Free Software Foundation; either version 2 of the License, or
-	 * (at your option) any later version.
-	 *
-	 * This program is distributed in the hope that it will be useful,
-	 * but WITHOUT ANY WARRANTY; without even the implied warranty of
-	 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	 * GNU General Public License for more details.
-	 *
-	 * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <common.h>
-#if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB)
-#include <s3c2400.h>
-#elif defined(CONFIG_S3C2410)
-#include <s3c2410.h>
-#endif
-
-#ifdef CONFIG_SERIAL1
-#define UART_NR	S3C24X0_UART0
-
-#elif defined(CONFIG_SERIAL2)
-# if defined(CONFIG_TRAB)
-#  error "TRAB supports only CONFIG_SERIAL1"
-# endif
-#define UART_NR	S3C24X0_UART1
-
-#elif defined(CONFIG_SERIAL3)
-# if defined(CONFIG_TRAB)
-#  #error "TRAB supports only CONFIG_SERIAL1"
-# endif
-#define UART_NR	S3C24X0_UART2
-
-#else
-#error "Bad: you didn't configure serial ..."
-#endif
-
-void serial_setbrg (void)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
-	int i;
-	unsigned int reg = 0;
-
-	/* value is calculated so : (int)(PCLK/16./baudrate) -1 */
-	reg = get_PCLK() / (16 * gd->baudrate) - 1;
-
-	/* FIFO enable, Tx/Rx FIFO clear */
-	uart->UFCON = 0x07;
-	uart->UMCON = 0x0;
-	/* Normal,No parity,1 stop,8 bit */
-	uart->ULCON = 0x3;
-	/*
-	 * tx=level,rx=edge,disable timeout int.,enable rx error int.,
-	 * normal,interrupt or polling
-	 */
-	uart->UCON = 0x245;
-	uart->UBRDIV = reg;
-
-#ifdef CONFIG_HWFLOW
-	uart->UMCON = 0x1; /* RTS up */
-#endif
-	for (i = 0; i < 100; i++);
-}
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-int serial_init (void)
-{
-	serial_setbrg ();
-
-	return (0);
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-int serial_getc (void)
-{
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
-
-	/* wait for character to arrive */
-	while (!(uart->UTRSTAT & 0x1));
-
-	return uart->URXH & 0xff;
-}
-
-#ifdef CONFIG_HWFLOW
-static int hwflow = 0; /* turned off by default */
-int hwflow_onoff(int on)
-{
-	switch(on) {
-	case 0:
-	default:
-		break; /* return current */
-	case 1:
-		hwflow = 1; /* turn on */
-		break;
-	case -1:
-		hwflow = 0; /* turn off */
-		break;
-	}
-	return hwflow;
-}
-#endif
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int be_quiet = 0;
-void disable_putc(void)
-{
-	be_quiet = 1;
-}
-
-void enable_putc(void)
-{
-	be_quiet = 0;
-}
-#endif
-
-
-/*
- * Output a single byte to the serial port.
- */
-void serial_putc (const char c)
-{
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
-#ifdef CONFIG_MODEM_SUPPORT
-	if (be_quiet)
-		return;
-#endif
-
-	/* wait for room in the tx FIFO */
-	while (!(uart->UTRSTAT & 0x2));
-
-#ifdef CONFIG_HWFLOW
-	/* Wait for CTS up */
-	while(hwflow && !(uart->UMSTAT & 0x1))
-		;
-#endif
-
-	uart->UTXH = c;
-
-	/* If \n, also do \r */
-	if (c == '\n')
-		serial_putc ('\r');
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-int serial_tstc (void)
-{
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
-
-	return uart->UTRSTAT & 0x1;
-}
-
-void
-serial_puts (const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}