summaryrefslogtreecommitdiff
path: root/cpu/arm920t/s3c24x0
diff options
context:
space:
mode:
authorJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>2009-03-30 18:58:40 +0200
committerJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>2009-03-30 18:58:40 +0200
commitd3b635774194404bcd424f6b376419bce22076ad (patch)
treebe7c5057940c3e430cbd2852db5e520a9733b3e9 /cpu/arm920t/s3c24x0
parent300f99f4539dd5caf7e19af5e4ea5eb259445913 (diff)
downloadu-boot-imx-d3b635774194404bcd424f6b376419bce22076ad.zip
u-boot-imx-d3b635774194404bcd424f6b376419bce22076ad.tar.gz
u-boot-imx-d3b635774194404bcd424f6b376419bce22076ad.tar.bz2
s3c24x0: move i2c driver to drivers/i2c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Diffstat (limited to 'cpu/arm920t/s3c24x0')
-rw-r--r--cpu/arm920t/s3c24x0/Makefile2
-rw-r--r--cpu/arm920t/s3c24x0/i2c.c447
2 files changed, 1 insertions, 448 deletions
diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile
index 8fd525e..fd13e53 100644
--- a/cpu/arm920t/s3c24x0/Makefile
+++ b/cpu/arm920t/s3c24x0/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
-COBJS = i2c.o interrupts.o speed.o usb.o usb_ohci.o nand.o
+COBJS = interrupts.o speed.o usb.o usb_ohci.o nand.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/arm920t/s3c24x0/i2c.c b/cpu/arm920t/s3c24x0/i2c.c
deleted file mode 100644
index fba5cd1..0000000
--- a/cpu/arm920t/s3c24x0/i2c.c
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* This code should work for both the S3C2400 and the S3C2410
- * as they seem to have the same I2C controller inside.
- * The different address mapping is handled by the s3c24xx.h files below.
- */
-
-#include <common.h>
-
-#ifdef CONFIG_DRIVER_S3C24X0_I2C
-
-#if defined(CONFIG_S3C2400)
-#include <s3c2400.h>
-#elif defined(CONFIG_S3C2410)
-#include <s3c2410.h>
-#endif
-#include <i2c.h>
-
-#ifdef CONFIG_HARD_I2C
-
-#define I2C_WRITE 0
-#define I2C_READ 1
-
-#define I2C_OK 0
-#define I2C_NOK 1
-#define I2C_NACK 2
-#define I2C_NOK_LA 3 /* Lost arbitration */
-#define I2C_NOK_TOUT 4 /* time out */
-
-#define I2CSTAT_BSY 0x20 /* Busy bit */
-#define I2CSTAT_NACK 0x01 /* Nack bit */
-#define I2CCON_IRPND 0x10 /* Interrupt pending bit */
-#define I2C_MODE_MT 0xC0 /* Master Transmit Mode */
-#define I2C_MODE_MR 0x80 /* Master Receive Mode */
-#define I2C_START_STOP 0x20 /* START / STOP */
-#define I2C_TXRX_ENA 0x10 /* I2C Tx/Rx enable */
-
-#define I2C_TIMEOUT 1 /* 1 second */
-
-
-static int GetI2CSDA(void)
-{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-
-#ifdef CONFIG_S3C2410
- return (gpio->GPEDAT & 0x8000) >> 15;
-#endif
-#ifdef CONFIG_S3C2400
- return (gpio->PGDAT & 0x0020) >> 5;
-#endif
-}
-
-#if 0
-static void SetI2CSDA(int x)
-{
- rGPEDAT = (rGPEDAT & ~0x8000) | (x&1) << 15;
-}
-#endif
-
-static void SetI2CSCL(int x)
-{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-
-#ifdef CONFIG_S3C2410
- gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14;
-#endif
-#ifdef CONFIG_S3C2400
- gpio->PGDAT = (gpio->PGDAT & ~0x0040) | (x&1) << 6;
-#endif
-}
-
-
-static int WaitForXfer (void)
-{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
- int i, status;
-
- i = I2C_TIMEOUT * 10000;
- status = i2c->IICCON;
- while ((i > 0) && !(status & I2CCON_IRPND)) {
- udelay (100);
- status = i2c->IICCON;
- i--;
- }
-
- return (status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
-}
-
-static int IsACK (void)
-{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
-
- return (!(i2c->IICSTAT & I2CSTAT_NACK));
-}
-
-static void ReadWriteByte (void)
-{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
-
- i2c->IICCON &= ~I2CCON_IRPND;
-}
-
-void i2c_init (int speed, int slaveadd)
-{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
- S3C24X0_GPIO *const gpio = S3C24X0_GetBase_GPIO ();
- ulong freq, pres = 16, div;
- int i, status;
-
- /* wait for some time to give previous transfer a chance to finish */
-
- i = I2C_TIMEOUT * 1000;
- status = i2c->IICSTAT;
- while ((i > 0) && (status & I2CSTAT_BSY)) {
- udelay (1000);
- status = i2c->IICSTAT;
- i--;
- }
-
- if ((status & I2CSTAT_BSY) || GetI2CSDA () == 0) {
-#ifdef CONFIG_S3C2410
- ulong old_gpecon = gpio->GPECON;
-#endif
-#ifdef CONFIG_S3C2400
- ulong old_gpecon = gpio->PGCON;
-#endif
- /* bus still busy probably by (most) previously interrupted transfer */
-
-#ifdef CONFIG_S3C2410
- /* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
- gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;
-#endif
-#ifdef CONFIG_S3C2400
- /* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
- gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00001000;
-#endif
-
- /* toggle I2CSCL until bus idle */
- SetI2CSCL (0);
- udelay (1000);
- i = 10;
- while ((i > 0) && (GetI2CSDA () != 1)) {
- SetI2CSCL (1);
- udelay (1000);
- SetI2CSCL (0);
- udelay (1000);
- i--;
- }
- SetI2CSCL (1);
- udelay (1000);
-
- /* restore pin functions */
-#ifdef CONFIG_S3C2410
- gpio->GPECON = old_gpecon;
-#endif
-#ifdef CONFIG_S3C2400
- gpio->PGCON = old_gpecon;
-#endif
- }
-
- /* calculate prescaler and divisor values */
- freq = get_PCLK ();
- if ((freq / pres / (16 + 1)) > speed)
- /* set prescaler to 512 */
- pres = 512;
-
- div = 0;
- while ((freq / pres / (div + 1)) > speed)
- div++;
-
- /* set prescaler, divisor according to freq, also set
- * ACKGEN, IRQ */
- i2c->IICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0);
-
- /* init to SLAVE REVEIVE and set slaveaddr */
- i2c->IICSTAT = 0;
- i2c->IICADD = slaveadd;
- /* program Master Transmit (and implicit STOP) */
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
-
-}
-
-/*
- * cmd_type is 0 for write, 1 for read.
- *
- * addr_len can take any value from 0-255, it is only limited
- * by the char, we could make it larger if needed. If it is
- * 0 we skip the address write cycle.
- */
-static
-int i2c_transfer (unsigned char cmd_type,
- unsigned char chip,
- unsigned char addr[],
- unsigned char addr_len,
- unsigned char data[], unsigned short data_len)
-{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
- int i, status, result;
-
- if (data == 0 || data_len == 0) {
- /*Don't support data transfer of no length or to address 0 */
- printf ("i2c_transfer: bad call\n");
- return I2C_NOK;
- }
-
- /* Check I2C bus idle */
- i = I2C_TIMEOUT * 1000;
- status = i2c->IICSTAT;
- while ((i > 0) && (status & I2CSTAT_BSY)) {
- udelay (1000);
- status = i2c->IICSTAT;
- i--;
- }
-
- if (status & I2CSTAT_BSY)
- return I2C_NOK_TOUT;
-
- i2c->IICCON |= 0x80;
- result = I2C_OK;
-
- switch (cmd_type) {
- case I2C_WRITE:
- if (addr && addr_len) {
- i2c->IICDS = chip;
- /* send START */
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
- i = 0;
- while ((i < addr_len) && (result == I2C_OK)) {
- result = WaitForXfer ();
- i2c->IICDS = addr[i];
- ReadWriteByte ();
- i++;
- }
- i = 0;
- while ((i < data_len) && (result == I2C_OK)) {
- result = WaitForXfer ();
- i2c->IICDS = data[i];
- ReadWriteByte ();
- i++;
- }
- } else {
- i2c->IICDS = chip;
- /* send START */
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
- i = 0;
- while ((i < data_len) && (result = I2C_OK)) {
- result = WaitForXfer ();
- i2c->IICDS = data[i];
- ReadWriteByte ();
- i++;
- }
- }
-
- if (result == I2C_OK)
- result = WaitForXfer ();
-
- /* send STOP */
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
- ReadWriteByte ();
- break;
-
- case I2C_READ:
- if (addr && addr_len) {
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
- i2c->IICDS = chip;
- /* send START */
- i2c->IICSTAT |= I2C_START_STOP;
- result = WaitForXfer ();
- if (IsACK ()) {
- i = 0;
- while ((i < addr_len) && (result == I2C_OK)) {
- i2c->IICDS = addr[i];
- ReadWriteByte ();
- result = WaitForXfer ();
- i++;
- }
-
- i2c->IICDS = chip;
- /* resend START */
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA |
- I2C_START_STOP;
- ReadWriteByte ();
- result = WaitForXfer ();
- i = 0;
- while ((i < data_len) && (result == I2C_OK)) {
- /* disable ACK for final READ */
- if (i == data_len - 1)
- i2c->IICCON &= ~0x80;
- ReadWriteByte ();
- result = WaitForXfer ();
- data[i] = i2c->IICDS;
- i++;
- }
- } else {
- result = I2C_NACK;
- }
-
- } else {
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
- i2c->IICDS = chip;
- /* send START */
- i2c->IICSTAT |= I2C_START_STOP;
- result = WaitForXfer ();
-
- if (IsACK ()) {
- i = 0;
- while ((i < data_len) && (result == I2C_OK)) {
- /* disable ACK for final READ */
- if (i == data_len - 1)
- i2c->IICCON &= ~0x80;
- ReadWriteByte ();
- result = WaitForXfer ();
- data[i] = i2c->IICDS;
- i++;
- }
- } else {
- result = I2C_NACK;
- }
- }
-
- /* send STOP */
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
- ReadWriteByte ();
- break;
-
- default:
- printf ("i2c_transfer: bad call\n");
- result = I2C_NOK;
- break;
- }
-
- return (result);
-}
-
-int i2c_probe (uchar chip)
-{
- uchar buf[1];
-
- buf[0] = 0;
-
- /*
- * What is needed is to send the chip address and verify that the
- * address was <ACK>ed (i.e. there was a chip at that address which
- * drove the data line low).
- */
- return (i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK);
-}
-
-int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
- uchar xaddr[4];
- int ret;
-
- if (alen > 4) {
- printf ("I2C read: addr len %d not supported\n", alen);
- return 1;
- }
-
- if (alen > 0) {
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
- }
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones
- * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
- * address and the extra bits end up in the "chip address"
- * bit slots. This makes a 24WC08 (1Kbyte) chip look like
- * four 256 byte chips.
- *
- * Note that we consider the length of the address field to
- * still be one byte because the extra address bits are
- * hidden in the chip address.
- */
- if (alen > 0)
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
- if ((ret =
- i2c_transfer (I2C_READ, chip << 1, &xaddr[4 - alen], alen,
- buffer, len)) != 0) {
- printf ("I2c read: failed %d\n", ret);
- return 1;
- }
- return 0;
-}
-
-int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
- uchar xaddr[4];
-
- if (alen > 4) {
- printf ("I2C write: addr len %d not supported\n", alen);
- return 1;
- }
-
- if (alen > 0) {
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
- }
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones
- * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
- * address and the extra bits end up in the "chip address"
- * bit slots. This makes a 24WC08 (1Kbyte) chip look like
- * four 256 byte chips.
- *
- * Note that we consider the length of the address field to
- * still be one byte because the extra address bits are
- * hidden in the chip address.
- */
- if (alen > 0)
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
- return (i2c_transfer
- (I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
- len) != 0);
-}
-#endif /* CONFIG_HARD_I2C */
-
-#endif /* CONFIG_DRIVER_S3C24X0_I2C */