ks8695: move serial driver to drivers/serial

add CONFIG_KS8695_SERIAL to activate the driver

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

2 files changed, 1 insertions, 118 deletions

diff --git a/cpu/arm920t/ks8695/Makefile b/cpu/arm920t/ks8695/Makefile
index 7db9473..f6b0063 100644
--- a/cpu/arm920t/ks8695/Makefile
+++ b/cpu/arm920t/ks8695/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).a
 
-COBJS	= interrupts.o serial.o
+COBJS	= interrupts.o
 SOBJS	= lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/arm920t/ks8695/serial.c b/cpu/arm920t/ks8695/serial.c
deleted file mode 100644
index aacd1be..0000000
--- a/cpu/arm920t/ks8695/serial.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * serial.c -- KS8695 serial driver
- *
- * (C) Copyright 2004, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-
-#ifndef CONFIG_SERIAL1
-#error "Bad: you didn't configure serial ..."
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- *	Define the UART hardware register access structure.
- */
-struct ks8695uart {
-	unsigned int	RX;		/* 0x00	- Receive data (r) */
-	unsigned int	TX;		/* 0x04	- Transmit data (w) */
-	unsigned int	FCR;		/* 0x08	- Fifo Control (r/w) */
-	unsigned int	LCR;		/* 0x0c	- Line Control (r/w) */
-	unsigned int	MCR;		/* 0x10	- Modem Control (r/w) */
-	unsigned int	LSR;		/* 0x14	- Line Status (r/w) */
-	unsigned int	MSR;		/* 0x18	- Modem Status (r/w) */
-	unsigned int	BD;		/* 0x1c	- Baud Rate (r/w) */
-	unsigned int	SR;		/* 0x20	- Status (r/w) */
-};
-
-#define	KS8695_UART_ADDR	((void *) (KS8695_IO_BASE + KS8695_UART_RX_BUFFER))
-#define	KS8695_UART_CLK		25000000
-
-
-/*
- * Under some circumstances we want to be "quiet" and not issue any
- * serial output - though we want u-boot to otherwise work and behave
- * the same. By default be noisy.
- */
-int serial_console = 1;
-
-
-void serial_setbrg(void)
-{
-	volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
-
-	/* Set to global baud rate and 8 data bits, no parity, 1 stop bit*/
-	uartp->BD = KS8695_UART_CLK / gd->baudrate;
-	uartp->LCR = KS8695_UART_LINEC_WLEN8;
-}
-
-int serial_init(void)
-{
-	serial_console = 1;
-	serial_setbrg();
-	return 0;
-}
-
-void serial_raw_putc(const char c)
-{
-	volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
-	int i;
-
-	for (i = 0; (i < 0x100000); i++) {
-		if (uartp->LSR & KS8695_UART_LINES_TXFE)
-			break;
-	}
-
-	uartp->TX = c;
-}
-
-void serial_putc(const char c)
-{
-	if (serial_console) {
-		serial_raw_putc(c);
-		if (c == '\n')
-			serial_raw_putc('\r');
-	}
-}
-
-int serial_tstc(void)
-{
-	volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
-	if (serial_console)
-		return ((uartp->LSR & KS8695_UART_LINES_RXFE) ? 1 : 0);
-	return 0;
-}
-
-void serial_puts(const char *s)
-{
-	char c;
-	while ((c = *s++) != 0)
-		serial_putc(c);
-}
-
-int serial_getc(void)
-{
-	volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
-
-	while ((uartp->LSR & KS8695_UART_LINES_RXFE) == 0)
-		;
-	return (uartp->RX);
-}