Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:

Reverting became necessary after it turned out that the patches in
the u-boot-arm repo were modified, and in some cases corrupted.

This reverts the following commits:

	066bebd6353e33af3adefc3404560871699e9961
	7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
	c88ae20580b2b01487b4cdcc8b2a113f551aee36
	a147e56f03871bba4f05058d5e04ce7deb010b04
	d6674e0e2a6a1f033945f78838566210d3f28c95
	8c8463cce44d849e37744749b32d38e1dfb12e50
	c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
	8bf69d81782619187933a605f1a95ee1d069478d
	8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
	a574a73852a527779234e73e17e7597fd8128882
	1377b5583a48021d983e1fd565f7d40c89e84d63
	1704dc20917b4f71e373e2c888497ee666d40380

Signed-off-by: Wolfgang Denk <wd@denx.de>

4 files changed, 0 insertions, 486 deletions

diff --git a/cpu/arm1136/mx31/Makefile b/cpu/arm1136/mx31/Makefile
deleted file mode 100644
index 1fc8eea..0000000
--- a/cpu/arm1136/mx31/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundatio; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).a
-
-COBJS	= interrupts.o serial.o generic.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#######################################################################
-##
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
diff --git a/cpu/arm1136/mx31/generic.c b/cpu/arm1136/mx31/generic.c
deleted file mode 100644
index 297d616..0000000
--- a/cpu/arm1136/mx31/generic.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2007
- * Sascha Hauer, Pengutronix
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/mx31-regs.h>
-
-static u32 mx31_decode_pll(u32 reg, u32 infreq)
-{
-	u32 mfi = (reg >> 10) & 0xf;
-	u32 mfn = reg & 0x3f;
-	u32 mfd = (reg >> 16) & 0x3f;
-	u32 pd =  (reg >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-	mfd += 1;
-	pd += 1;
-
-	return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) /
-		(mfd * pd)) << 10;
-}
-
-u32 mx31_get_mpl_dpdgck_clk(void)
-{
-	u32 infreq;
-
-	if ((__REG(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
-		infreq = CONFIG_MX31_CLK32 * 1024;
-	else
-		infreq = CONFIG_MX31_HCLK_FREQ;
-
-	return mx31_decode_pll(__REG(CCM_MPCTL), infreq); }
-
-u32 mx31_get_mcu_main_clk(void)
-{
-	/* For now we assume mpl_dpdgck_clk == mcu_main_clk
-	 * which should be correct for most boards
-	 */
-	return mx31_get_mpl_dpdgck_clk();
-}
-
-u32 mx31_get_ipg_clk(void)
-{
-	u32 freq = mx31_get_mcu_main_clk();
-	u32 pdr0 = __REG(CCM_PDR0);
-
-	freq /= ((pdr0 >> 3) & 0x7) + 1;
-	freq /= ((pdr0 >> 6) & 0x3) + 1;
-
-	return freq;
-}
-
-void mx31_dump_clocks(void)
-{
-	u32 cpufreq = mx31_get_mcu_main_clk();
-	printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000);
-	printf("ipg clock     : %dHz\n", mx31_get_ipg_clk());
-}
-
-void mx31_gpio_mux(unsigned long mode)
-{
-	unsigned long reg, shift, tmp;
-
-	reg = IOMUXC_BASE + (mode & 0xfc);
-	shift = (~mode & 0x3) * 8;
-
-	tmp = __REG(reg);
-	tmp &= ~(0xff << shift);
-	tmp |= ((mode >> 8) & 0xff) << shift;
-	__REG(reg) = tmp;
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
-	printf("CPU:   Freescale i.MX31 at %d MHz\n",
-		mx31_get_mcu_main_clk() / 1000000);
-	return 0;
-}
-#endif
diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c
deleted file mode 100644
index 189f601..0000000
--- a/cpu/arm1136/mx31/interrupts.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * (C) Copyright 2007
- * Sascha Hauer, Pengutronix
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/mx31-regs.h>
-
-#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
-
-/* General purpose timers registers */
-#define GPTCR   __REG(TIMER_BASE) /* Control register */
-#define GPTPR  __REG(TIMER_BASE + 0x4) /* Prescaler register */
-#define GPTSR   __REG(TIMER_BASE + 0x8) /* Status register */
-#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */
-
-/* General purpose timers bitfields */
-#define GPTCR_SWR       (1<<15) /* Software reset */
-#define GPTCR_FRR       (1<<9)  /* Freerun / restart */
-#define GPTCR_CLKSOURCE_32 (4<<6)  /* Clock source */
-#define GPTCR_TEN       (1)     /* Timer enable */
-
-/*
- * nothing really to do with interrupts, just starts up a counter.
- */
-int interrupt_init(void)
-{
-	int i;
-
-	/* setup GP Timer 1 */
-	GPTCR = GPTCR_SWR;
-	for (i = 0; i < 100; i++) GPTCR = 0; /* We have no udelay by now */
-	GPTPR = 0; /* 32Khz */
-	/* Freerun Mode, PERCLK1 input */
-	GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
-
-	return 0;
-}
-
-void reset_timer_masked(void)
-{
-	GPTCR = 0;
-	/* Freerun Mode, PERCLK1 input*/
-	GPTCR = GPTCR_CLKSOURCE_32 | GPTCR_TEN;
-}
-
-ulong get_timer_masked(void)
-{
-	ulong val = GPTCNT;
-	return val;
-}
-
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-}
-
-/* delay x useconds AND perserve advance timstamp value */
-void udelay(unsigned long usec)
-{
-	ulong tmo, tmp;
-
-	if (usec >= 1000) {
-	/* "big" number, spread normalization to seconds */
-		/* start to normalize for usec to ticks per sec */
-		tmo = usec / 1000;
-		/* find number of "ticks" to wait to achieve target */
-		tmo *= CFG_HZ;
-		tmo /= 1000;	/* finish normalize. */
-	} else {
-		/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
-		tmo /= (1000*1000);
-	}
-
-	tmp = get_timer(0);		/* get current timestamp */
-	if ((tmo + tmp + 1) < tmp)
-		/* setting this forward will roll time stamp */
-		/* reset "advancing" timestamp to 0, set lastinc value */
-		reset_timer_masked();
-	else
-		/* else, set advancing stamp wake up time */
-		tmo	+= tmp;
-	while (get_timer_masked() < tmo)/* loop till event */
-		/*NOP*/;
-}
-
-void reset_cpu(ulong addr)
-{
-	__REG16(WDOG_BASE) = 4;
-}
diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c
deleted file mode 100644
index f7e1b3b..0000000
--- a/cpu/arm1136/mx31/serial.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- */
-
-#include <common.h>
-
-#if defined CONFIG_MX31_UART
-
-#include <asm/arch/mx31.h>
-
-#define __REG(x)     (*((volatile u32 *)(x)))
-
-#ifdef CFG_MX31_UART1
-#define UART_PHYS 0x43f90000
-#elif defined(CFG_MX31_UART2)
-#define UART_PHYS 0x43f94000
-#elif defined(CFG_MX31_UART3)
-#define UART_PHYS 0x5000c000
-#elif defined(CFG_MX31_UART4)
-#define UART_PHYS 0x43fb0000
-#elif defined(CFG_MX31_UART5)
-#define UART_PHYS 0x43fb4000
-#else
-#error "define CFG_MX31_UARTx to use the mx31 UART driver"
-#endif
-
-/* Register definitions */
-#define URXD  0x0  /* Receiver Register */
-#define UTXD  0x40 /* Transmitter Register */
-#define UCR1  0x80 /* Control Register 1 */
-#define UCR2  0x84 /* Control Register 2 */
-#define UCR3  0x88 /* Control Register 3 */
-#define UCR4  0x8c /* Control Register 4 */
-#define UFCR  0x90 /* FIFO Control Register */
-#define USR1  0x94 /* Status Register 1 */
-#define USR2  0x98 /* Status Register 2 */
-#define UESC  0x9c /* Escape Character Register */
-#define UTIM  0xa0 /* Escape Timer Register */
-#define UBIR  0xa4 /* BRM Incremental Register */
-#define UBMR  0xa8 /* BRM Modulator Register */
-#define UBRC  0xac /* Baud Rate Count Register */
-#define UTS   0xb4 /* UART Test Register (mx31) */
-
-/* UART Control Register Bit Fields.*/
-#define  URXD_CHARRDY    (1<<15)
-#define  URXD_ERR        (1<<14)
-#define  URXD_OVRRUN     (1<<13)
-#define  URXD_FRMERR     (1<<12)
-#define  URXD_BRK        (1<<11)
-#define  URXD_PRERR      (1<<10)
-#define  UCR1_ADEN       (1<<15) /* Auto dectect interrupt */
-#define  UCR1_ADBR       (1<<14) /* Auto detect baud rate */
-#define  UCR1_TRDYEN     (1<<13) /* Transmitter ready interrupt enable */
-#define  UCR1_IDEN       (1<<12) /* Idle condition interrupt */
-#define  UCR1_RRDYEN     (1<<9)  /* Recv ready interrupt enable */
-#define  UCR1_RDMAEN     (1<<8)  /* Recv ready DMA enable */
-#define  UCR1_IREN       (1<<7)  /* Infrared interface enable */
-#define  UCR1_TXMPTYEN   (1<<6)  /* Transimitter empty interrupt enable */
-#define  UCR1_RTSDEN     (1<<5)  /* RTS delta interrupt enable */
-#define  UCR1_SNDBRK     (1<<4)  /* Send break */
-#define  UCR1_TDMAEN     (1<<3)  /* Transmitter ready DMA enable */
-#define  UCR1_UARTCLKEN  (1<<2)  /* UART clock enabled */
-#define  UCR1_DOZE       (1<<1)  /* Doze */
-#define  UCR1_UARTEN     (1<<0)  /* UART enabled */
-#define  UCR2_ESCI     	 (1<<15) /* Escape seq interrupt enable */
-#define  UCR2_IRTS  	 (1<<14) /* Ignore RTS pin */
-#define  UCR2_CTSC  	 (1<<13) /* CTS pin control */
-#define  UCR2_CTS        (1<<12) /* Clear to send */
-#define  UCR2_ESCEN      (1<<11) /* Escape enable */
-#define  UCR2_PREN       (1<<8)  /* Parity enable */
-#define  UCR2_PROE       (1<<7)  /* Parity odd/even */
-#define  UCR2_STPB       (1<<6)	 /* Stop */
-#define  UCR2_WS         (1<<5)	 /* Word size */
-#define  UCR2_RTSEN      (1<<4)	 /* Request to send interrupt enable */
-#define  UCR2_TXEN       (1<<2)	 /* Transmitter enabled */
-#define  UCR2_RXEN       (1<<1)	 /* Receiver enabled */
-#define  UCR2_SRST 	 (1<<0)	 /* SW reset */
-#define  UCR3_DTREN 	 (1<<13) /* DTR interrupt enable */
-#define  UCR3_PARERREN   (1<<12) /* Parity enable */
-#define  UCR3_FRAERREN   (1<<11) /* Frame error interrupt enable */
-#define  UCR3_DSR        (1<<10) /* Data set ready */
-#define  UCR3_DCD        (1<<9)  /* Data carrier detect */
-#define  UCR3_RI         (1<<8)  /* Ring indicator */
-#define  UCR3_TIMEOUTEN  (1<<7)  /* Timeout interrupt enable */
-#define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
-#define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
-#define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
-#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz */
-#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz */
-#define  UCR3_INVT  	 (1<<1)  /* Inverted Infrared transmission */
-#define  UCR3_BPEN  	 (1<<0)  /* Preset registers enable */
-#define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
-#define  UCR4_INVR  	 (1<<9)  /* Inverted infrared reception */
-#define  UCR4_ENIRI 	 (1<<8)  /* Serial infrared interrupt enable */
-#define  UCR4_WKEN  	 (1<<7)  /* Wake interrupt enable */
-#define  UCR4_REF16 	 (1<<6)  /* Ref freq 16 MHz */
-#define  UCR4_IRSC  	 (1<<5)  /* IR special case */
-#define  UCR4_TCEN  	 (1<<3)  /* Transmit complete interrupt enable */
-#define  UCR4_BKEN  	 (1<<2)  /* Break condition interrupt enable */
-#define  UCR4_OREN  	 (1<<1)  /* Receiver overrun interrupt enable */
-#define  UCR4_DREN  	 (1<<0)  /* Recv data ready interrupt enable */
-#define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
-#define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
-#define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
-#define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
-#define  USR1_RTSS  	 (1<<14) /* RTS pin status */
-#define  USR1_TRDY  	 (1<<13) /* Transmitter ready interrupt/dma flag */
-#define  USR1_RTSD  	 (1<<12) /* RTS delta */
-#define  USR1_ESCF  	 (1<<11) /* Escape seq interrupt flag */
-#define  USR1_FRAMERR    (1<<10) /* Frame error interrupt flag */
-#define  USR1_RRDY       (1<<9)	 /* Receiver ready interrupt/dma flag */
-#define  USR1_TIMEOUT    (1<<7)	 /* Receive timeout interrupt status */
-#define  USR1_RXDS  	 (1<<6)	 /* Receiver idle interrupt flag */
-#define  USR1_AIRINT	 (1<<5)	 /* Async IR wake interrupt flag */
-#define  USR1_AWAKE 	 (1<<4)	 /* Aysnc wake interrupt flag */
-#define  USR2_ADET  	 (1<<15) /* Auto baud rate detect complete */
-#define  USR2_TXFE  	 (1<<14) /* Transmit buffer FIFO empty */
-#define  USR2_DTRF  	 (1<<13) /* DTR edge interrupt flag */
-#define  USR2_IDLE  	 (1<<12) /* Idle condition */
-#define  USR2_IRINT 	 (1<<8)	 /* Serial infrared interrupt flag */
-#define  USR2_WAKE  	 (1<<7)	 /* Wake */
-#define  USR2_RTSF  	 (1<<4)	 /* RTS edge interrupt flag */
-#define  USR2_TXDC  	 (1<<3)	 /* Transmitter complete */
-#define  USR2_BRCD  	 (1<<2)	 /* Break condition */
-#define  USR2_ORE        (1<<1)	 /* Overrun error */
-#define  USR2_RDR        (1<<0)	 /* Recv data ready */
-#define  UTS_FRCPERR	 (1<<13) /* Force parity error */
-#define  UTS_LOOP        (1<<12) /* Loop tx and rx */
-#define  UTS_TXEMPTY	 (1<<6)	 /* TxFIFO empty */
-#define  UTS_RXEMPTY	 (1<<5)	 /* RxFIFO empty */
-#define  UTS_TXFULL 	 (1<<4)	 /* TxFIFO full */
-#define  UTS_RXFULL 	 (1<<3)	 /* RxFIFO full */
-#define  UTS_SOFTRST	 (1<<0)	 /* Software reset */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void serial_setbrg(void)
-{
-	u32 clk = mx31_get_ipg_clk();
-
-	if (!gd->baudrate)
-		gd->baudrate = CONFIG_BAUDRATE;
-
-	__REG(UART_PHYS + UFCR) = 4 << 7; /* divide input clock by 2 */
-	__REG(UART_PHYS + UBIR) = 0xf;
-	__REG(UART_PHYS + UBMR) = clk / (2 * gd->baudrate);
-
-}
-
-int serial_getc(void)
-{
-	while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
-	return __REG(UART_PHYS + URXD);
-}
-
-void serial_putc(const char c)
-{
-	__REG(UART_PHYS + UTXD) = c;
-
-	/* wait for transmitter to be ready */
-	while (!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY));
-
-	/* If \n, also do \r */
-	if (c == '\n')
-		serial_putc('\r');
-}
-
-/*
- * Test whether a character is in the RX buffer  */
-int serial_tstc(void)
-{
-	/* If receive fifo is empty, return false */
-	if (__REG(UART_PHYS + UTS) & UTS_RXEMPTY)
-		return 0;
-	return 1;
-}
-
-void serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc(*s++);
-	}
-}
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-int serial_init(void)
-{
-	__REG(UART_PHYS + UCR1) = 0x0;
-	__REG(UART_PHYS + UCR2) = 0x0;
-
-	while (!(__REG(UART_PHYS + UCR2) & UCR2_SRST));
-
-	__REG(UART_PHYS + UCR3) = 0x0704;
-	__REG(UART_PHYS + UCR4) = 0x8000;
-	__REG(UART_PHYS + UESC) = 0x002b;
-	__REG(UART_PHYS + UTIM) = 0x0;
-
-	__REG(UART_PHYS + UTS) = 0x0;
-
-	serial_setbrg();
-
-	__REG(UART_PHYS + UCR2) = UCR2_WS | UCR2_IRTS | UCR2_RXEN | \
-					UCR2_TXEN | UCR2_SRST;
-
-	__REG(UART_PHYS + UCR1) = UCR1_UARTEN;
-
-	return 0;
-}
-
-
-#endif /* CONFIG_MX31 */