Merge branch 'ext4'

Update Makefile change for LIBS -> LIBS-y change.

Conflicts:
	Makefile

Signed-off-by: Tom Rini <trini@ti.com>

4 files changed, 519 insertions, 202 deletions

diff --git a/common/Makefile b/common/Makefile
index 57da76f..22e8a6f 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -86,7 +86,13 @@ COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o
 COBJS-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o
 COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
 COBJS-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o
+COBJS-$(CONFIG_CMD_EXT4) += cmd_ext4.o
 COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
+ifdef CONFIG_CMD_EXT4
+COBJS-y	+= cmd_ext_common.o
+else
+COBJS-$(CONFIG_CMD_EXT2) += cmd_ext_common.o
+endif
 COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
 COBJS-$(CONFIG_CMD_FDC)$(CONFIG_CMD_FDOS) += cmd_fdc.o
 COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o
diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c
index 79b1e2f..c27d9c7 100644
--- a/common/cmd_ext2.c
+++ b/common/cmd_ext2.c
@@ -1,4 +1,9 @@
 /*
+ * (C) Copyright 2011 - 2012 Samsung Electronics
+ * EXT4 filesystem implementation in Uboot by
+ * Uma Shankar <uma.shankar@samsung.com>
+ * Manjunatha C Achar <a.manjunatha@samsung.com>
+
  * (C) Copyright 2004
  * esd gmbh <www.esd-electronics.com>
  * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
@@ -33,225 +38,35 @@
  * Ext2fs support
  */
 #include <common.h>
-#include <part.h>
-#include <config.h>
-#include <command.h>
-#include <image.h>
-#include <linux/ctype.h>
-#include <asm/byteorder.h>
-#include <ext2fs.h>
-#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
-#include <usb.h>
-#endif
-
-#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
-#error DOS or EFI partition support must be selected
-#endif
-
-/* #define	EXT2_DEBUG */
-
-#ifdef	EXT2_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
+#include <ext_common.h>
 
 int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	char *filename = "/";
-	int dev=0;
-	int part=1;
-	char *ep;
-	block_dev_desc_t *dev_desc=NULL;
-	int part_length;
-
-	if (argc < 3)
-		return CMD_RET_USAGE;
-
-	dev = (int)simple_strtoul (argv[2], &ep, 16);
-	dev_desc = get_dev(argv[1],dev);
-
-	if (dev_desc == NULL) {
-		printf ("\n** Block device %s %d not supported\n", argv[1], dev);
-		return 1;
-	}
-
-	if (*ep) {
-		if (*ep != ':') {
-			puts ("\n** Invalid boot device, use `dev[:part]' **\n");
-			return 1;
-		}
-		part = (int)simple_strtoul(++ep, NULL, 16);
-	}
-
-	if (argc == 4)
-		filename = argv[3];
-
-	PRINTF("Using device %s %d:%d, directory: %s\n", argv[1], dev, part, filename);
-
-	if ((part_length = ext2fs_set_blk_dev(dev_desc, part)) == 0) {
-		printf ("** Bad partition - %s %d:%d **\n",  argv[1], dev, part);
-		ext2fs_close();
-		return 1;
-	}
-
-	if (!ext2fs_mount(part_length)) {
-		printf ("** Bad ext2 partition or disk - %s %d:%d **\n",  argv[1], dev, part);
-		ext2fs_close();
-		return 1;
-	}
-
-	if (ext2fs_ls (filename)) {
-		printf ("** Error ext2fs_ls() **\n");
-		ext2fs_close();
-		return 1;
-	};
-
-	ext2fs_close();
+	if (do_ext_ls(cmdtp, flag, argc, argv))
+		return -1;
 
 	return 0;
 }
 
-U_BOOT_CMD(
-	ext2ls,	4,	1,	do_ext2ls,
-	"list files in a directory (default /)",
-	"<interface> <dev[:part]> [directory]\n"
-	"    - list files from 'dev' on 'interface' in a 'directory'"
-);
-
 /******************************************************************************
  * Ext2fs boot command intepreter. Derived from diskboot
  */
 int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	char *filename = NULL;
-	char *ep;
-	int dev, part = 1;
-	ulong addr = 0, part_length;
-	int filelen;
-	disk_partition_t info;
-	block_dev_desc_t *dev_desc = NULL;
-	char buf [12];
-	unsigned long count;
-	char *addr_str;
-
-	switch (argc) {
-	case 3:
-		addr_str = getenv("loadaddr");
-		if (addr_str != NULL)
-			addr = simple_strtoul (addr_str, NULL, 16);
-		else
-			addr = CONFIG_SYS_LOAD_ADDR;
-
-		filename = getenv ("bootfile");
-		count = 0;
-		break;
-	case 4:
-		addr = simple_strtoul (argv[3], NULL, 16);
-		filename = getenv ("bootfile");
-		count = 0;
-		break;
-	case 5:
-		addr = simple_strtoul (argv[3], NULL, 16);
-		filename = argv[4];
-		count = 0;
-		break;
-	case 6:
-		addr = simple_strtoul (argv[3], NULL, 16);
-		filename = argv[4];
-		count = simple_strtoul (argv[5], NULL, 16);
-		break;
-
-	default:
-		return CMD_RET_USAGE;
-	}
-
-	if (!filename) {
-		puts ("** No boot file defined **\n");
-		return 1;
-	}
-
-	dev = (int)simple_strtoul (argv[2], &ep, 16);
-	dev_desc = get_dev(argv[1],dev);
-	if (dev_desc==NULL) {
-		printf ("** Block device %s %d not supported\n", argv[1], dev);
-		return 1;
-	}
-	if (*ep) {
-		if (*ep != ':') {
-			puts ("** Invalid boot device, use `dev[:part]' **\n");
-			return 1;
-		}
-		part = (int)simple_strtoul(++ep, NULL, 16);
-	}
-
-	PRINTF("Using device %s%d, partition %d\n", argv[1], dev, part);
-
-	if (part != 0) {
-		if (get_partition_info (dev_desc, part, &info)) {
-			printf ("** Bad partition %d **\n", part);
-			return 1;
-		}
-
-		if (strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) {
-			printf ("** Invalid partition type \"%.32s\""
-				" (expect \"" BOOT_PART_TYPE "\")\n",
-				info.type);
-			return 1;
-		}
-		printf ("Loading file \"%s\" "
-			"from %s device %d:%d (%.32s)\n",
-			filename,
-			argv[1], dev, part, info.name);
-	} else {
-		printf ("Loading file \"%s\" from %s device %d\n",
-			filename, argv[1], dev);
-	}
-
-
-	if ((part_length = ext2fs_set_blk_dev(dev_desc, part)) == 0) {
-		printf ("** Bad partition - %s %d:%d **\n",  argv[1], dev, part);
-		ext2fs_close();
-		return 1;
-	}
-
-	if (!ext2fs_mount(part_length)) {
-		printf ("** Bad ext2 partition or disk - %s %d:%d **\n",
-			argv[1], dev, part);
-		ext2fs_close();
-		return 1;
-	}
-
-	filelen = ext2fs_open(filename);
-	if (filelen < 0) {
-		printf("** File not found %s\n", filename);
-		ext2fs_close();
-		return 1;
-	}
-	if ((count < filelen) && (count != 0)) {
-	    filelen = count;
-	}
-
-	if (ext2fs_read((char *)addr, filelen) != filelen) {
-		printf("** Unable to read \"%s\" from %s %d:%d **\n",
-			filename, argv[1], dev, part);
-		ext2fs_close();
-		return 1;
-	}
-
-	ext2fs_close();
-
-	/* Loading ok, update default load address */
-	load_addr = addr;
-
-	printf ("%d bytes read\n", filelen);
-	sprintf(buf, "%X", filelen);
-	setenv("filesize", buf);
+	if (do_ext_load(cmdtp, flag, argc, argv))
+		return -1;
 
 	return 0;
 }
 
 U_BOOT_CMD(
+	ext2ls,	4,	1,	do_ext2ls,
+	"list files in a directory (default /)",
+	"<interface> <dev[:part]> [directory]\n"
+	"    - list files from 'dev' on 'interface' in a 'directory'"
+);
+
+U_BOOT_CMD(
 	ext2load,	6,	0,	do_ext2load,
 	"load binary file from a Ext2 filesystem",
 	"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
diff --git a/common/cmd_ext4.c b/common/cmd_ext4.c
new file mode 100644
index 0000000..77094c4
--- /dev/null
+++ b/common/cmd_ext4.c
@@ -0,0 +1,237 @@
+/*
+ * (C) Copyright 2011 - 2012 Samsung Electronics
+ * EXT4 filesystem implementation in Uboot by
+ * Uma Shankar <uma.shankar@samsung.com>
+ * Manjunatha C Achar <a.manjunatha@samsung.com>
+ *
+ * Ext4fs support
+ * made from existing cmd_ext2.c file of Uboot
+ *
+ * (C) Copyright 2004
+ * esd gmbh <www.esd-electronics.com>
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * made from cmd_reiserfs by
+ *
+ * (C) Copyright 2003 - 2004
+ * Sysgo Real-Time Solutions, AG <www.elinos.com>
+ * Pavel Bartusek <pba@sysgo.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * Changelog:
+ *	0.1 - Newly created file for ext4fs support. Taken from cmd_ext2.c
+ *	        file in uboot. Added ext4fs ls load and write support.
+ */
+
+#include <common.h>
+#include <part.h>
+#include <config.h>
+#include <command.h>
+#include <image.h>
+#include <linux/ctype.h>
+#include <asm/byteorder.h>
+#include <ext_common.h>
+#include <ext4fs.h>
+#include <linux/stat.h>
+#include <malloc.h>
+
+#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
+#include <usb.h>
+#endif
+
+#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
+#error DOS or EFI partition support must be selected
+#endif
+
+uint64_t total_sector;
+uint64_t part_offset;
+#if defined(CONFIG_CMD_EXT4_WRITE)
+static uint64_t part_size;
+static uint16_t cur_part = 1;
+#endif
+
+#define DOS_PART_MAGIC_OFFSET		0x1fe
+#define DOS_FS_TYPE_OFFSET		0x36
+#define DOS_FS32_TYPE_OFFSET		0x52
+
+int do_ext4_load(cmd_tbl_t *cmdtp, int flag, int argc,
+						char *const argv[])
+{
+	if (do_ext_load(cmdtp, flag, argc, argv))
+		return -1;
+
+	return 0;
+}
+
+int do_ext4_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	if (do_ext_ls(cmdtp, flag, argc, argv))
+		return -1;
+
+	return 0;
+}
+
+#if defined(CONFIG_CMD_EXT4_WRITE)
+static int ext4_register_device(block_dev_desc_t *dev_desc, int part_no)
+{
+	unsigned char buffer[SECTOR_SIZE];
+	disk_partition_t info;
+
+	if (!dev_desc->block_read)
+		return -1;
+
+	/* check if we have a MBR (on floppies we have only a PBR) */
+	if (dev_desc->block_read(dev_desc->dev, 0, 1, (ulong *) buffer) != 1) {
+		printf("** Can't read from device %d **\n", dev_desc->dev);
+		return -1;
+	}
+	if (buffer[DOS_PART_MAGIC_OFFSET] != 0x55 ||
+	    buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) {
+		/* no signature found */
+		return -1;
+	}
+
+	/* First we assume there is a MBR */
+	if (!get_partition_info(dev_desc, part_no, &info)) {
+		part_offset = info.start;
+		cur_part = part_no;
+		part_size = info.size;
+	} else if ((strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],
+			    "FAT", 3) == 0) || (strncmp((char *)&buffer
+							[DOS_FS32_TYPE_OFFSET],
+							"FAT32", 5) == 0)) {
+		/* ok, we assume we are on a PBR only */
+		cur_part = 1;
+		part_offset = 0;
+	} else {
+		printf("** Partition %d not valid on device %d **\n",
+		       part_no, dev_desc->dev);
+		return -1;
+	}
+
+	return 0;
+}
+
+int do_ext4_write(cmd_tbl_t *cmdtp, int flag, int argc,
+				char *const argv[])
+{
+	const char *filename = "/";
+	int part_length;
+	unsigned long part = 1;
+	int dev;
+	char *ep;
+	unsigned long ram_address;
+	unsigned long file_size;
+	disk_partition_t info;
+	struct ext_filesystem *fs;
+
+	if (argc < 6)
+		return cmd_usage(cmdtp);
+
+	dev = (int)simple_strtoul(argv[2], &ep, 16);
+	ext4_dev_desc = get_dev(argv[1], dev);
+	if (ext4_dev_desc == NULL) {
+		printf("Block device %s %d not supported\n", argv[1], dev);
+		return 1;
+	}
+	if (init_fs(ext4_dev_desc))
+		return 1;
+
+	fs = get_fs();
+	if (*ep) {
+		if (*ep != ':') {
+			puts("Invalid boot device, use `dev[:part]'\n");
+			goto fail;
+		}
+		part = simple_strtoul(++ep, NULL, 16);
+	}
+
+	/* get the filename */
+	filename = argv[3];
+
+	/* get the address in hexadecimal format (string to int) */
+	ram_address = simple_strtoul(argv[4], NULL, 16);
+
+	/* get the filesize in base 10 format */
+	file_size = simple_strtoul(argv[5], NULL, 10);
+
+	/* set the device as block device */
+	part_length = ext4fs_set_blk_dev(fs->dev_desc, part);
+	if (part_length == 0) {
+		printf("Bad partition - %s %d:%lu\n", argv[1], dev, part);
+		goto fail;
+	}
+
+	/* register the device and partition */
+	if (ext4_register_device(fs->dev_desc, part) != 0) {
+		printf("Unable to use %s %d:%lu for fattable\n",
+		       argv[1], dev, part);
+		goto fail;
+	}
+
+	/* get the partition information */
+	if (!get_partition_info(fs->dev_desc, part, &info)) {
+		total_sector = (info.size * info.blksz) / SECTOR_SIZE;
+		fs->total_sect = total_sector;
+	} else {
+		printf("error : get partition info\n");
+		goto fail;
+	}
+
+	/* mount the filesystem */
+	if (!ext4fs_mount(part_length)) {
+		printf("Bad ext4 partition %s %d:%lu\n", argv[1], dev, part);
+		goto fail;
+	}
+
+	/* start write */
+	if (ext4fs_write(filename, (unsigned char *)ram_address, file_size)) {
+		printf("** Error ext4fs_write() **\n");
+		goto fail;
+	}
+	ext4fs_close();
+	deinit_fs(fs->dev_desc);
+
+	return 0;
+
+fail:
+	ext4fs_close();
+	deinit_fs(fs->dev_desc);
+
+	return 1;
+}
+
+U_BOOT_CMD(ext4write, 6, 1, do_ext4_write,
+	"create a file in the root directory",
+	"<interface> <dev[:part]> [Absolute filename path] [Address] [sizebytes]\n"
+	"	  - create a file in / directory");
+
+#endif
+
+U_BOOT_CMD(ext4ls, 4, 1, do_ext4_ls,
+	   "list files in a directory (default /)",
+	   "<interface> <dev[:part]> [directory]\n"
+	   "	  - list files from 'dev' on 'interface' in a 'directory'");
+
+U_BOOT_CMD(ext4load, 6, 0, do_ext4_load,
+	   "load binary file from a Ext4 filesystem",
+	   "<interface> <dev[:part]> [addr] [filename] [bytes]\n"
+	   "	  - load binary file 'filename' from 'dev' on 'interface'\n"
+	   "		 to address 'addr' from ext4 filesystem");
diff --git a/common/cmd_ext_common.c b/common/cmd_ext_common.c
new file mode 100644
index 0000000..56ee9a5
--- /dev/null
+++ b/common/cmd_ext_common.c
@@ -0,0 +1,259 @@
+/*
+ * (C) Copyright 2011 - 2012 Samsung Electronics
+ * EXT2/4 filesystem implementation in Uboot by
+ * Uma Shankar <uma.shankar@samsung.com>
+ * Manjunatha C Achar <a.manjunatha@samsung.com>
+ *
+ * Ext4fs support
+ * made from existing cmd_ext2.c file of Uboot
+ *
+ * (C) Copyright 2004
+ * esd gmbh <www.esd-electronics.com>
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * made from cmd_reiserfs by
+ *
+ * (C) Copyright 2003 - 2004
+ * Sysgo Real-Time Solutions, AG <www.elinos.com>
+ * Pavel Bartusek <pba@sysgo.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * Changelog:
+ *	0.1 - Newly created file for ext4fs support. Taken from cmd_ext2.c
+ *	        file in uboot. Added ext4fs ls load and write support.
+ */
+
+#include <common.h>
+#include <part.h>
+#include <config.h>
+#include <command.h>
+#include <image.h>
+#include <linux/ctype.h>
+#include <asm/byteorder.h>
+#include <ext_common.h>
+#include <ext4fs.h>
+#include <linux/stat.h>
+#include <malloc.h>
+
+#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
+#include <usb.h>
+#endif
+
+#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
+#error DOS or EFI partition support must be selected
+#endif
+
+#define DOS_PART_MAGIC_OFFSET		0x1fe
+#define DOS_FS_TYPE_OFFSET		0x36
+#define DOS_FS32_TYPE_OFFSET		0x52
+
+int do_ext_load(cmd_tbl_t *cmdtp, int flag, int argc,
+						char *const argv[])
+{
+	char *filename = NULL;
+	char *ep;
+	int dev;
+	unsigned long part = 1;
+	ulong addr = 0;
+	ulong part_length;
+	int filelen;
+	disk_partition_t info;
+	struct ext_filesystem *fs;
+	char buf[12];
+	unsigned long count;
+	const char *addr_str;
+
+	count = 0;
+	addr = simple_strtoul(argv[3], NULL, 16);
+	filename = getenv("bootfile");
+	switch (argc) {
+	case 3:
+		addr_str = getenv("loadaddr");
+		if (addr_str != NULL)
+			addr = simple_strtoul(addr_str, NULL, 16);
+		else
+			addr = CONFIG_SYS_LOAD_ADDR;
+
+		break;
+	case 4:
+		break;
+	case 5:
+		filename = argv[4];
+		break;
+	case 6:
+		filename = argv[4];
+		count = simple_strtoul(argv[5], NULL, 16);
+		break;
+
+	default:
+		return cmd_usage(cmdtp);
+	}
+
+	if (!filename) {
+		puts("** No boot file defined **\n");
+		return 1;
+	}
+
+	dev = (int)simple_strtoul(argv[2], &ep, 16);
+	ext4_dev_desc = get_dev(argv[1], dev);
+	if (ext4_dev_desc == NULL) {
+		printf("** Block device %s %d not supported\n", argv[1], dev);
+		return 1;
+	}
+	if (init_fs(ext4_dev_desc))
+		return 1;
+
+	fs = get_fs();
+	if (*ep) {
+		if (*ep != ':') {
+			puts("** Invalid boot device, use `dev[:part]' **\n");
+			goto fail;
+		}
+		part = simple_strtoul(++ep, NULL, 16);
+	}
+
+	if (part != 0) {
+		if (get_partition_info(fs->dev_desc, part, &info)) {
+			printf("** Bad partition %lu **\n", part);
+			goto fail;
+		}
+
+		if (strncmp((char *)info.type, BOOT_PART_TYPE,
+			    strlen(BOOT_PART_TYPE)) != 0) {
+			printf("** Invalid partition type \"%s\""
+			       " (expect \"" BOOT_PART_TYPE "\")\n", info.type);
+			goto fail;
+		}
+		printf("Loading file \"%s\" "
+		       "from %s device %d:%lu %s\n",
+		       filename, argv[1], dev, part, info.name);
+	} else {
+		printf("Loading file \"%s\" from %s device %d\n",
+		       filename, argv[1], dev);
+	}
+
+	part_length = ext4fs_set_blk_dev(fs->dev_desc, part);
+	if (part_length == 0) {
+		printf("**Bad partition - %s %d:%lu **\n", argv[1], dev, part);
+		ext4fs_close();
+		goto fail;
+	}
+
+	if (!ext4fs_mount(part_length)) {
+		printf("** Bad ext2 partition or disk - %s %d:%lu **\n",
+		       argv[1], dev, part);
+		ext4fs_close();
+		goto fail;
+	}
+
+	filelen = ext4fs_open(filename);
+	if (filelen < 0) {
+		printf("** File not found %s\n", filename);
+		ext4fs_close();
+		goto fail;
+	}
+	if ((count < filelen) && (count != 0))
+		filelen = count;
+
+	if (ext4fs_read((char *)addr, filelen) != filelen) {
+		printf("** Unable to read \"%s\" from %s %d:%lu **\n",
+		       filename, argv[1], dev, part);
+		ext4fs_close();
+		goto fail;
+	}
+
+	ext4fs_close();
+	deinit_fs(fs->dev_desc);
+	/* Loading ok, update default load address */
+	load_addr = addr;
+
+	printf("%d bytes read\n", filelen);
+	sprintf(buf, "%X", filelen);
+	setenv("filesize", buf);
+
+	return 0;
+fail:
+	deinit_fs(fs->dev_desc);
+	return 1;
+}
+
+int do_ext_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	const char *filename = "/";
+	int dev;
+	unsigned long part = 1;
+	char *ep;
+	struct ext_filesystem *fs;
+	int part_length;
+	if (argc < 3)
+		return cmd_usage(cmdtp);
+
+	dev = (int)simple_strtoul(argv[2], &ep, 16);
+
+	ext4_dev_desc = get_dev(argv[1], dev);
+
+	if (ext4_dev_desc == NULL) {
+		printf("\n** Block device %s %d not supported\n", argv[1], dev);
+		return 1;
+	}
+
+	if (init_fs(ext4_dev_desc))
+		return 1;
+
+	fs = get_fs();
+	if (*ep) {
+		if (*ep != ':') {
+			puts("\n** Invalid boot device, use `dev[:part]' **\n");
+			goto fail;
+		}
+		part = simple_strtoul(++ep, NULL, 16);
+	}
+
+	if (argc == 4)
+		filename = argv[3];
+
+	part_length = ext4fs_set_blk_dev(fs->dev_desc, part);
+	if (part_length == 0) {
+		printf("** Bad partition - %s %d:%lu **\n", argv[1], dev, part);
+		ext4fs_close();
+		goto fail;
+	}
+
+	if (!ext4fs_mount(part_length)) {
+		printf("** Bad ext2 partition or disk - %s %d:%lu **\n",
+		       argv[1], dev, part);
+		ext4fs_close();
+		goto fail;
+	}
+
+	if (ext4fs_ls(filename)) {
+		printf("** Error extfs_ls() **\n");
+		ext4fs_close();
+		goto fail;
+	};
+
+	ext4fs_close();
+	deinit_fs(fs->dev_desc);
+	return 0;
+
+fail:
+	deinit_fs(fs->dev_desc);
+	return 1;
+}