Initial revision

2 files changed, 812 insertions, 0 deletions

diff --git a/common/virtex2.c b/common/virtex2.c
new file mode 100644
index 0000000..b519be9
--- /dev/null
+++ b/common/virtex2.c
@@ -0,0 +1,543 @@
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ * Keith Outwater, keith_outwater@mvis.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * Configuration support for Xilinx Virtex2 devices.  Based
+ * on spartan2.c (Rich Ireland, rireland@enterasys.com).
+ */
+
+#include <common.h>
+#include <virtex2.h>
+
+#if (CONFIG_FPGA & (CFG_XILINX | CFG_VIRTEX2))
+
+#ifdef	FPGA_DEBUG
+#define	PRINTF(fmt,args...)	printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+/*
+ * If the SelectMap interface can be overrun by the processor, define
+ * CFG_FPGA_CHECK_BUSY and/or CONFIG_FPGA_DELAY in the board configuration
+ * file and add board-specific support for checking BUSY status. By default,
+ * assume that the SelectMap interface cannot be overrun.
+ */
+#ifndef CFG_FPGA_CHECK_BUSY
+#undef CFG_FPGA_CHECK_BUSY
+#endif
+
+#ifndef CONFIG_FPGA_DELAY
+#define CONFIG_FPGA_DELAY()
+#endif
+
+#ifndef CFG_FPGA_PROG_FEEDBACK
+#define CFG_FPGA_PROG_FEEDBACK
+#endif
+
+/*
+ * Don't allow config cycle to be interrupted
+ */
+#ifndef CFG_FPGA_CHECK_CTRLC
+#undef CFG_FPGA_CHECK_CTRLC
+#endif
+
+/*
+ * Check for errors during configuration by default
+ */
+#ifndef CFG_FPGA_CHECK_ERROR
+#define CFG_FPGA_CHECK_ERROR
+#endif
+
+/*
+ * The default timeout in mS for INIT_B to deassert after PROG_B has
+ * been deasserted. Per the latest Virtex II Handbook (page 347), the
+ * max time from PORG_B deassertion to INIT_B deassertion is 4uS per
+ * data frame for the XC2V8000.  The XC2V8000 has 2860 data frames
+ * which yields 11.44 mS.  So let's make it bigger in order to handle
+ * an XC2V1000, if anyone can ever get ahold of one.
+ */
+#ifndef CFG_FPGA_WAIT_INIT
+#define CFG_FPGA_WAIT_INIT 	500	/* time in milliseconds */
+#endif
+
+/*
+ * The default timeout for waiting for BUSY to deassert during configuration.
+ * This is normally not necessary since for most reasonable configuration
+ * clock frequencies (i.e. 66 MHz or less), BUSY monitoring is unnecessary.
+ */
+#ifndef CFG_FPGA_WAIT_BUSY
+#define CFG_FPGA_WAIT_BUSY	5	/* time in milliseconds */
+#endif
+
+/* Default timeout for waiting for FPGA to enter operational mode after
+ * configuration data has been written.
+ */
+#ifndef	CFG_FPGA_WAIT_CONFIG
+#define CFG_FPGA_WAIT_CONFIG	200	/* time in milliseconds */
+#endif
+
+static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize);
+static int Virtex2_ssm_dump (Xilinx_desc * desc, void *buf, size_t bsize);
+static int Virtex2_ssm_reloc (Xilinx_desc * desc, ulong reloc_offset);
+
+static int Virtex2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize);
+static int Virtex2_ss_dump (Xilinx_desc * desc, void *buf, size_t bsize);
+static int Virtex2_ss_reloc (Xilinx_desc * desc, ulong reloc_offset);
+
+int Virtex2_load (Xilinx_desc * desc, void *buf, size_t bsize)
+{
+	int ret_val = FPGA_FAIL;
+
+	switch (desc->iface) {
+	case slave_serial:
+		PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__);
+		ret_val = Virtex2_ss_load (desc, buf, bsize);
+		break;
+
+	case slave_selectmap:
+		PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__);
+		ret_val = Virtex2_ssm_load (desc, buf, bsize);
+		break;
+
+	default:
+		printf ("%s: Unsupported interface type, %d\n",
+				__FUNCTION__, desc->iface);
+	}
+	return ret_val;
+}
+
+int Virtex2_dump (Xilinx_desc * desc, void *buf, size_t bsize)
+{
+	int ret_val = FPGA_FAIL;
+
+	switch (desc->iface) {
+	case slave_serial:
+		PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__);
+		ret_val = Virtex2_ss_dump (desc, buf, bsize);
+		break;
+
+	case slave_parallel:
+		PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__);
+		ret_val = Virtex2_ssm_dump (desc, buf, bsize);
+		break;
+
+	default:
+		printf ("%s: Unsupported interface type, %d\n",
+				__FUNCTION__, desc->iface);
+	}
+	return ret_val;
+}
+
+int Virtex2_info (Xilinx_desc * desc)
+{
+	return FPGA_SUCCESS;
+}
+
+int Virtex2_reloc (Xilinx_desc * desc, ulong reloc_offset)
+{
+	int ret_val = FPGA_FAIL;
+
+	if (desc->family != Xilinx_Virtex2) {
+		printf ("%s: Unsupported family type, %d\n",
+				__FUNCTION__, desc->family);
+		return FPGA_FAIL;
+	} else
+		switch (desc->iface) {
+		case slave_serial:
+			ret_val = Virtex2_ss_reloc (desc, reloc_offset);
+			break;
+
+		case slave_selectmap:
+			ret_val = Virtex2_ssm_reloc (desc, reloc_offset);
+			break;
+
+		default:
+			printf ("%s: Unsupported interface type, %d\n",
+					__FUNCTION__, desc->iface);
+		}
+	return ret_val;
+}
+
+/*
+ * Virtex-II Slave SelectMap configuration loader. Configuration via
+ * SelectMap is as follows:
+ * 1. Set the FPGA's PROG_B line low.
+ * 2. Set the FPGA's PROG_B line high.  Wait for INIT_B to go high.
+ * 3. Write data to the SelectMap port.  If INIT_B goes low at any time
+ *    this process, a configuration error (most likely CRC failure) has
+ *    ocurred.  At this point a status word may be read from the
+ *    SelectMap interface to determine the source of the problem (You
+ *    could, for instance, put this in you 'abort' function handler).
+ * 4. After all data has been written, test the state of the FPGA
+ *    INIT_B and DONE lines.  If both are high, configuration has
+ *    succeeded. Congratulations!
+ */
+static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
+{
+	int ret_val = FPGA_FAIL;
+	Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns;
+
+	PRINTF ("%s:%d: Start with interface functions @ 0x%p\n",
+			__FUNCTION__, __LINE__, fn);
+
+	if (fn) {
+		size_t bytecount = 0;
+		unsigned char *data = (unsigned char *) buf;
+		int cookie = desc->cookie;
+		unsigned long ts;
+
+		/* Gotta split this one up (so the stack won't blow??) */
+		PRINTF ("%s:%d: Function Table:\n"
+				"  base   0x%p\n"
+				"  struct 0x%p\n"
+				"  pre    0x%p\n"
+				"  prog   0x%p\n"
+				"  init   0x%p\n"
+				"  error  0x%p\n",
+				__FUNCTION__, __LINE__,
+				&fn, fn, fn->pre, fn->pgm, fn->init, fn->err);
+		PRINTF ("  clock  0x%p\n"
+				"  cs     0x%p\n"
+				"  write  0x%p\n"
+				"  rdata  0x%p\n"
+				"  wdata  0x%p\n"
+				"  busy   0x%p\n"
+				"  abort  0x%p\n"
+				"  post   0x%p\n\n",
+				fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata,
+				fn->busy, fn->abort, fn->post);
+
+#ifdef CFG_FPGA_PROG_FEEDBACK
+		printf ("Initializing FPGA Device %d...\n", cookie);
+#endif
+		/*
+		 * Run the pre configuration function if there is one.
+		 */
+		if (*fn->pre) {
+			(*fn->pre) (cookie);
+		}
+
+		/*
+		 * Assert the program line.  The minimum pulse width for
+		 * Virtex II devices is 300 nS (Tprogram parameter in datasheet).
+		 * There is no maximum value for the pulse width.  Check to make
+		 * sure that INIT_B goes low after assertion of PROG_B
+		 */
+		(*fn->pgm) (TRUE, TRUE, cookie);
+		udelay (10);
+		ts = get_timer (0);
+		do {
+			if (get_timer (ts) > CFG_FPGA_WAIT_INIT) {
+				printf ("%s:%d: ** Timeout after %d mS waiting for INIT"
+						" to assert.\n", __FUNCTION__, __LINE__,
+						CFG_FPGA_WAIT_INIT);
+				(*fn->abort) (cookie);
+				return FPGA_FAIL;
+			}
+		} while (!(*fn->init) (cookie));
+
+		(*fn->pgm) (FALSE, TRUE, cookie);
+		CONFIG_FPGA_DELAY ();
+		(*fn->clk) (TRUE, TRUE, cookie);
+
+		/*
+		 * Start a timer and wait for INIT_B to go high
+		 */
+		ts = get_timer (0);
+		do {
+			CONFIG_FPGA_DELAY ();
+			if (get_timer (ts) > CFG_FPGA_WAIT_INIT) {
+				printf ("%s:%d: ** Timeout after %d mS waiting for INIT"
+						" to deassert.\n", __FUNCTION__, __LINE__,
+						CFG_FPGA_WAIT_INIT);
+				(*fn->abort) (cookie);
+				return FPGA_FAIL;
+			}
+		} while ((*fn->init) (cookie) && (*fn->busy) (cookie));
+
+		(*fn->wr) (TRUE, TRUE, cookie);
+		(*fn->cs) (TRUE, TRUE, cookie);
+
+		udelay (10000);
+
+		/*
+		 * Load the data byte by byte
+		 */
+		while (bytecount < bsize) {
+#ifdef CFG_FPGA_CHECK_CTRLC
+			if (ctrlc ()) {
+				(*fn->abort) (cookie);
+				return FPGA_FAIL;
+			}
+#endif
+#ifdef CFG_FPGA_CHECK_ERROR
+			if ((*fn->init) (cookie)) {
+				printf ("%s:%d:  ** Error: INIT asserted during"
+						" configuration\n", __FUNCTION__, __LINE__);
+				(*fn->abort) (cookie);
+				return FPGA_FAIL;
+			}
+#endif
+			(*fn->wdata) (data[bytecount++], TRUE, cookie);
+			CONFIG_FPGA_DELAY ();
+
+			/*
+			 * Cycle the clock pin
+			 */
+			(*fn->clk) (FALSE, TRUE, cookie);
+			CONFIG_FPGA_DELAY ();
+			(*fn->clk) (TRUE, TRUE, cookie);
+
+#ifdef CFG_FPGA_CHECK_BUSY
+			ts = get_timer (0);
+			while ((*fn->busy) (cookie)) {
+				if (get_timer (ts) > CFG_FPGA_WAIT_BUSY) {
+					printf ("%s:%d: ** Timeout after %d mS waiting for"
+							" BUSY to deassert\n",
+							__FUNCTION__, __LINE__, CFG_FPGA_WAIT_BUSY);
+					(*fn->abort) (cookie);
+					return FPGA_FAIL;
+				}
+			}
+#endif
+
+#ifdef CFG_FPGA_PROG_FEEDBACK
+			if (bytecount % (bsize / 40) == 0)
+				putc ('.');
+#endif
+		}
+
+		/*
+		 * Finished writing the data; deassert FPGA CS_B and WRITE_B signals.
+		 */
+		CONFIG_FPGA_DELAY ();
+		(*fn->cs) (FALSE, TRUE, cookie);
+		(*fn->wr) (FALSE, TRUE, cookie);
+
+#ifdef CFG_FPGA_PROG_FEEDBACK
+		putc ('\n');
+#endif
+
+		/*
+		 * Check for successful configuration.  FPGA INIT_B and DONE should
+		 * both be high upon successful configuration.
+		 */
+		ts = get_timer (0);
+		ret_val = FPGA_SUCCESS;
+		while (((*fn->done) (cookie) == FPGA_FAIL) || (*fn->init) (cookie)) {
+			if (get_timer (ts) > CFG_FPGA_WAIT_CONFIG) {
+				printf ("%s:%d: ** Timeout after %d mS waiting for DONE to"
+						"assert and INIT to deassert\n",
+						__FUNCTION__, __LINE__, CFG_FPGA_WAIT_CONFIG);
+				(*fn->abort) (cookie);
+				ret_val = FPGA_FAIL;
+				break;
+			}
+		}
+
+		if (ret_val == FPGA_SUCCESS) {
+#ifdef CFG_FPGA_PROG_FEEDBACK
+			printf ("Initialization of FPGA device %d complete\n", cookie);
+#endif
+			/*
+			 * Run the post configuration function if there is one.
+			 */
+			if (*fn->post) {
+				(*fn->post) (cookie);
+			}
+		} else {
+#ifdef CFG_FPGA_PROG_FEEDBACK
+			printf ("** Initialization of FPGA device %d FAILED\n",
+					cookie);
+#endif
+		}
+	} else {
+		printf ("%s:%d: NULL Interface function table!\n",
+				__FUNCTION__, __LINE__);
+	}
+	return ret_val;
+}
+
+/*
+ * Read the FPGA configuration data
+ */
+static int Virtex2_ssm_dump (Xilinx_desc * desc, void *buf, size_t bsize)
+{
+	int ret_val = FPGA_FAIL;
+	Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns;
+
+	if (fn) {
+		unsigned char *data = (unsigned char *) buf;
+		size_t bytecount = 0;
+		int cookie = desc->cookie;
+
+		printf ("Starting Dump of FPGA Device %d...\n", cookie);
+
+		(*fn->cs) (TRUE, TRUE, cookie);
+		(*fn->clk) (TRUE, TRUE, cookie);
+
+		while (bytecount < bsize) {
+#ifdef CFG_FPGA_CHECK_CTRLC
+			if (ctrlc ()) {
+				(*fn->abort) (cookie);
+				return FPGA_FAIL;
+			}
+#endif
+			/*
+			 * Cycle the clock and read the data
+			 */
+			(*fn->clk) (FALSE, TRUE, cookie);
+			(*fn->clk) (TRUE, TRUE, cookie);
+			(*fn->rdata) (&(data[bytecount++]), cookie);
+#ifdef CFG_FPGA_PROG_FEEDBACK
+			if (bytecount % (bsize / 40) == 0)
+				putc ('.');
+#endif
+		}
+
+		/*
+		 * Deassert CS_B and cycle the clock to deselect the device.
+		 */
+		(*fn->cs) (FALSE, FALSE, cookie);
+		(*fn->clk) (FALSE, TRUE, cookie);
+		(*fn->clk) (TRUE, TRUE, cookie);
+
+#ifdef CFG_FPGA_PROG_FEEDBACK
+		putc ('\n');
+#endif
+		puts ("Done.\n");
+	} else {
+		printf ("%s:%d: NULL Interface function table!\n",
+				__FUNCTION__, __LINE__);
+	}
+	return ret_val;
+}
+
+/*
+ * Relocate the addresses in the function table from FLASH (or ROM,
+ * or whatever) to RAM.
+ */
+static int Virtex2_ssm_reloc (Xilinx_desc * desc, ulong reloc_offset)
+{
+	ulong addr;
+	int ret_val = FPGA_FAIL;
+	Xilinx_Virtex2_Slave_SelectMap_fns *fn_r, *fn =
+			(Xilinx_Virtex2_Slave_SelectMap_fns *) (desc->iface_fns);
+
+	if (fn) {
+		/*
+		 * Get the relocated table address
+		 */
+		addr = (ulong) fn + reloc_offset;
+		fn_r = (Xilinx_Virtex2_Slave_SelectMap_fns *) addr;
+
+		/*
+		 * Check to see if the table has already been relocated.  If not, do
+		 * a sanity check to make sure there is a faithful copy of the
+		 * FLASH based function table in RAM, then adjust the table.
+		 */
+		if (!fn_r->relocated) {
+			if (memcmp
+				(fn_r, fn, sizeof (Xilinx_Virtex2_Slave_SelectMap_fns))
+				== 0) {
+				desc->iface_fns = fn_r;
+			} else {
+				PRINTF ("%s:%d: Invalid function table at 0x%p\n",
+						__FUNCTION__, __LINE__, fn_r);
+				return FPGA_FAIL;
+			}
+
+			PRINTF ("%s:%d: Relocating descriptor at 0x%p\n",
+					__FUNCTION__, __LINE__, desc);
+
+			addr = (ulong) (fn->pre) + reloc_offset;
+			fn_r->pre = (Xilinx_pre_fn) addr;
+			addr = (ulong) (fn->pgm) + reloc_offset;
+			fn_r->pgm = (Xilinx_pgm_fn) addr;
+			addr = (ulong) (fn->init) + reloc_offset;
+			fn_r->init = (Xilinx_init_fn) addr;
+			addr = (ulong) (fn->done) + reloc_offset;
+			fn_r->done = (Xilinx_done_fn) addr;
+			addr = (ulong) (fn->err) + reloc_offset;
+			fn_r->err = (Xilinx_err_fn) addr;
+			addr = (ulong) (fn->clk) + reloc_offset;
+			fn_r->clk = (Xilinx_clk_fn) addr;
+			addr = (ulong) (fn->cs) + reloc_offset;
+			fn_r->cs = (Xilinx_cs_fn) addr;
+			addr = (ulong) (fn->wr) + reloc_offset;
+			fn_r->wr = (Xilinx_wr_fn) addr;
+			addr = (ulong) (fn->rdata) + reloc_offset;
+			fn_r->rdata = (Xilinx_rdata_fn) addr;
+			addr = (ulong) (fn->wdata) + reloc_offset;
+			fn_r->wdata = (Xilinx_wdata_fn) addr;
+			addr = (ulong) (fn->busy) + reloc_offset;
+			fn_r->busy = (Xilinx_busy_fn) addr;
+			addr = (ulong) (fn->abort) + reloc_offset;
+			fn_r->abort = (Xilinx_abort_fn) addr;
+			addr = (ulong) (fn->post) + reloc_offset;
+			fn_r->post = (Xilinx_post_fn) addr;
+			fn_r->relocated = TRUE;
+		} else {
+			printf ("%s:%d: Function table @0x%p has already been relocated\n", __FUNCTION__, __LINE__, fn_r);
+			desc->iface_fns = fn_r;
+		}
+		ret_val = FPGA_SUCCESS;
+	} else {
+		printf ("%s: NULL Interface function table!\n", __FUNCTION__);
+	}
+	return ret_val;
+}
+
+static int Virtex2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
+{
+	printf ("%s: Slave Serial Loading is unsupported\n", __FUNCTION__);
+	return FPGA_FAIL;
+}
+
+static int Virtex2_ss_dump (Xilinx_desc * desc, void *buf, size_t bsize)
+{
+	printf ("%s: Slave Serial Dumping is unsupported\n", __FUNCTION__);
+	return FPGA_FAIL;
+}
+
+static int Virtex2_ss_reloc (Xilinx_desc * desc, ulong reloc_offset)
+{
+	int ret_val = FPGA_FAIL;
+	Xilinx_Virtex2_Slave_Serial_fns *fn =
+			(Xilinx_Virtex2_Slave_Serial_fns *) (desc->iface_fns);
+
+	if (fn) {
+		printf ("%s:%d: Slave Serial Loading is unsupported\n",
+				__FUNCTION__, __LINE__);
+	} else {
+		printf ("%s:%d: NULL Interface function table!\n",
+				__FUNCTION__, __LINE__);
+	}
+	return ret_val;
+}
+#endif
+
+/* vim: set ts=4 tw=78: */
diff --git a/common/xilinx.c b/common/xilinx.c
new file mode 100644
index 0000000..cb153e1
--- /dev/null
+++ b/common/xilinx.c
@@ -0,0 +1,269 @@
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ * Keith Outwater, keith_outwater@mvis.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ *  Xilinx FPGA support
+ */
+
+#include <common.h>
+#include <virtex2.h>
+#include <spartan2.h>
+
+#if (CONFIG_FPGA & CFG_FPGA_XILINX)
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+/* Define FPGA_DEBUG to get debug printf's */
+#ifdef	FPGA_DEBUG
+#define	PRINTF(fmt,args...)	printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+/* Local Static Functions */
+static int xilinx_validate (Xilinx_desc * desc, char *fn);
+
+/* ------------------------------------------------------------------------- */
+
+int xilinx_load (Xilinx_desc * desc, void *buf, size_t bsize)
+{
+	int ret_val = FPGA_FAIL;	/* assume a failure */
+
+	if (!xilinx_validate (desc, __FUNCTION__)) {
+		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
+	} else
+		switch (desc->family) {
+		case Xilinx_Spartan2:
+#if (CONFIG_FPGA & CFG_SPARTAN2)
+			PRINTF ("%s: Launching the Spartan-II Loader...\n",
+					__FUNCTION__);
+			ret_val = Spartan2_load (desc, buf, bsize);
+#else
+			printf ("%s: No support for Spartan-II devices.\n",
+					__FUNCTION__);
+#endif
+			break;
+		case Xilinx_Virtex2:
+#if (CONFIG_FPGA & CFG_VIRTEX2)
+			PRINTF ("%s: Launching the Virtex-II Loader...\n",
+					__FUNCTION__);
+			ret_val = Virtex2_load (desc, buf, bsize);
+#else
+			printf ("%s: No support for Virtex-II devices.\n",
+					__FUNCTION__);
+#endif
+			break;
+
+		default:
+			printf ("%s: Unsupported family type, %d\n",
+					__FUNCTION__, desc->family);
+		}
+
+	return ret_val;
+}
+
+int xilinx_dump (Xilinx_desc * desc, void *buf, size_t bsize)
+{
+	int ret_val = FPGA_FAIL;	/* assume a failure */
+
+	if (!xilinx_validate (desc, __FUNCTION__)) {
+		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
+	} else
+		switch (desc->family) {
+		case Xilinx_Spartan2:
+#if (CONFIG_FPGA & CFG_SPARTAN2)
+			PRINTF ("%s: Launching the Spartan-II Reader...\n",
+					__FUNCTION__);
+			ret_val = Spartan2_dump (desc, buf, bsize);
+#else
+			printf ("%s: No support for Spartan-II devices.\n",
+					__FUNCTION__);
+#endif
+			break;
+		case Xilinx_Virtex2:
+#if (CONFIG_FPGA & CFG_VIRTEX2)
+			PRINTF ("%s: Launching the Virtex-II Reader...\n",
+					__FUNCTION__);
+			ret_val = Virtex2_dump (desc, buf, bsize);
+#else
+			printf ("%s: No support for Virtex-II devices.\n",
+					__FUNCTION__);
+#endif
+			break;
+
+		default:
+			printf ("%s: Unsupported family type, %d\n",
+					__FUNCTION__, desc->family);
+		}
+
+	return ret_val;
+}
+
+int xilinx_info (Xilinx_desc * desc)
+{
+	int ret_val = FPGA_FAIL;
+
+	if (xilinx_validate (desc, __FUNCTION__)) {
+		printf ("Family:        \t");
+		switch (desc->family) {
+		case Xilinx_Spartan2:
+			printf ("Spartan-II\n");
+			break;
+		case Xilinx_Virtex2:
+			printf ("Virtex-II\n");
+			break;
+			/* Add new family types here */
+		default:
+			printf ("Unknown family type, %d\n", desc->family);
+		}
+
+		printf ("Interface type:\t");
+		switch (desc->iface) {
+		case slave_serial:
+			printf ("Slave Serial\n");
+			break;
+		case master_serial:	/* Not used */
+			printf ("Master Serial\n");
+			break;
+		case slave_parallel:
+			printf ("Slave Parallel\n");
+			break;
+		case jtag_mode:		/* Not used */
+			printf ("JTAG Mode\n");
+			break;
+		case slave_selectmap:
+			printf ("Slave SelectMap Mode\n");
+			break;
+		case master_selectmap:
+			printf ("Master SelectMap Mode\n");
+			break;
+			/* Add new interface types here */
+		default:
+			printf ("Unsupported interface type, %d\n", desc->iface);
+		}
+
+		printf ("Device Size:   \t%d bytes\n"
+				"Cookie:        \t0x%x (%d)\n",
+				desc->size, desc->cookie, desc->cookie);
+
+		if (desc->iface_fns) {
+			printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
+			switch (desc->family) {
+			case Xilinx_Spartan2:
+#if (CONFIG_FPGA & CFG_SPARTAN2)
+				Spartan2_info (desc);
+#else
+				/* just in case */
+				printf ("%s: No support for Spartan-II devices.\n",
+						__FUNCTION__);
+#endif
+				break;
+			case Xilinx_Virtex2:
+#if (CONFIG_FPGA & CFG_VIRTEX2)
+				Virtex2_info (desc);
+#else
+				/* just in case */
+				printf ("%s: No support for Virtex-II devices.\n",
+						__FUNCTION__);
+#endif
+				break;
+				/* Add new family types here */
+			default:
+				/* we don't need a message here - we give one up above */
+			}
+		} else
+			printf ("No Device Function Table.\n");
+
+		ret_val = FPGA_SUCCESS;
+	} else {
+		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
+	}
+
+	return ret_val;
+}
+
+int xilinx_reloc (Xilinx_desc * desc, ulong reloc_offset)
+{
+	int ret_val = FPGA_FAIL;	/* assume a failure */
+
+	if (!xilinx_validate (desc, __FUNCTION__)) {
+		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
+	} else
+		switch (desc->family) {
+		case Xilinx_Spartan2:
+#if (CONFIG_FPGA & CFG_SPARTAN2)
+			ret_val = Spartan2_reloc (desc, reloc_offset);
+#else
+			printf ("%s: No support for Spartan-II devices.\n",
+					__FUNCTION__);
+#endif
+			break;
+		case Xilinx_Virtex2:
+#if (CONFIG_FPGA & CFG_VIRTEX2)
+			ret_val = Virtex2_reloc (desc, reloc_offset);
+#else
+			printf ("%s: No support for Virtex-II devices.\n",
+					__FUNCTION__);
+#endif
+			break;
+			/* Add new family types here */
+		default:
+			printf ("%s: Unsupported family type, %d\n",
+					__FUNCTION__, desc->family);
+		}
+
+	return ret_val;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+static int xilinx_validate (Xilinx_desc * desc, char *fn)
+{
+	int ret_val = FALSE;
+
+	if (desc) {
+		if ((desc->family > min_xilinx_type) &&
+			(desc->family < max_xilinx_type)) {
+			if ((desc->iface > min_xilinx_iface_type) &&
+				(desc->iface < max_xilinx_iface_type)) {
+				if (desc->size) {
+					ret_val = TRUE;
+				} else
+					printf ("%s: NULL part size\n", fn);
+			} else
+				printf ("%s: Invalid Interface type, %d\n",
+						fn, desc->iface);
+		} else
+			printf ("%s: Invalid family type, %d\n", fn, desc->family);
+	} else
+		printf ("%s: NULL descriptor!\n", fn);
+
+	return ret_val;
+}
+
+#endif							/* CONFIG_FPGA & CFG_FPGA_XILINX */