Initial revision

1 files changed, 1256 insertions, 0 deletions

diff --git a/common/bedbug.c b/common/bedbug.c
new file mode 100644
index 0000000..fe54d17
--- /dev/null
+++ b/common/bedbug.c
@@ -0,0 +1,1256 @@
+/* $Id$ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+
+#include <linux/ctype.h>
+#include <bedbug/bedbug.h>
+#include <bedbug/ppc.h>
+#include <bedbug/regs.h>
+#include <bedbug/tables.h>
+
+#define Elf32_Word	unsigned long
+
+/* USE_SOURCE_CODE enables some symbolic debugging functions of this
+   code.  This is only useful if the program will have access to the
+   source code for the binary being examined.
+*/
+
+/* #define USE_SOURCE_CODE 1 */
+
+#ifdef USE_SOURCE_CODE
+extern int line_info_from_addr __P ((Elf32_Word, char *, char *, int *));
+extern struct symreflist *symByAddr;
+extern char *symbol_name_from_addr __P ((Elf32_Word, int, int *));
+#endif /* USE_SOURCE_CODE */
+
+int print_operands __P ((struct ppc_ctx *));
+int get_operand_value __P ((struct opcode *, unsigned long,
+							enum OP_FIELD, unsigned long *));
+struct opcode *find_opcode __P ((unsigned long));
+struct opcode *find_opcode_by_name __P ((char *));
+char *spr_name __P ((int));
+int spr_value __P ((char *));
+char *tbr_name __P ((int));
+int tbr_value __P ((char *));
+int parse_operand __P ((unsigned long, struct opcode *,
+						struct operand *, char *, int *));
+int get_word __P ((char **, char *));
+long read_number __P ((char *));
+int downstring __P ((char *));
+
+
+/*======================================================================
+ * Entry point for the PPC disassembler.
+ *
+ * Arguments:
+ *	memaddr		The address to start disassembling from.
+ *
+ *	virtual		If this value is non-zero, then this will be
+ *			used as the base address for the output and
+ *			symbol lookups.  If this value is zero then
+ *			memaddr is used as the absolute address.
+ *
+ *	num_instr	The number of instructions to disassemble.  Since
+ *			each instruction is 32 bits long, this can be
+ *			computed if you know the total size of the region.
+ *
+ *	pfunc		The address of a function that is called to print
+ *			each line of output.  The function should take a
+ *			single character pointer as its parameters a la puts.
+ *
+ *	flags		Sets options for the output.  This is a
+ *			bitwise-inclusive-OR of the following
+ *			values.  Note that only one of the radix
+ *			options may be set.
+ *
+ *			F_RADOCTAL	- output radix is unsigned base 8.
+ *			F_RADUDECIMAL	- output radix is unsigned base 10.
+ *			F_RADSDECIMAL	- output radix is signed base 10.
+ *			F_RADHEX	- output radix is unsigned base 16.
+ *			F_SIMPLE	- use simplified mnemonics.
+ *			F_SYMBOL	- lookup symbols for addresses.
+ *			F_INSTR		- output raw instruction.
+ *			F_LINENO	- show line # info if available.
+ *
+ * Returns TRUE if the area was successfully disassembled or FALSE if
+ * a problem was encountered with accessing the memory.
+ */
+
+int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr,
+			int (*pfunc) (const char *), unsigned long flags)
+{
+	int i;
+	struct ppc_ctx ctx;
+
+#ifdef USE_SOURCE_CODE
+	int line_no = 0;
+	int last_line_no = 0;
+	char funcname[128] = { 0 };
+	char filename[256] = { 0 };
+	char last_funcname[128] = { 0 };
+	int symoffset;
+	char *symname;
+	char *cursym = (char *) 0;
+#endif /* USE_SOURCE_CODE */
+  /*------------------------------------------------------------*/
+
+	ctx.flags = flags;
+	ctx.virtual = virtual;
+
+	/* Figure out the output radix before we go any further */
+
+	if (ctx.flags & F_RADOCTAL) {
+		/* Unsigned octal output */
+		strcpy (ctx.radix_fmt, "O%o");
+	} else if (ctx.flags & F_RADUDECIMAL) {
+		/* Unsigned decimal output */
+		strcpy (ctx.radix_fmt, "%u");
+	} else if (ctx.flags & F_RADSDECIMAL) {
+		/* Signed decimal output */
+		strcpy (ctx.radix_fmt, "%d");
+	} else {
+		/* Unsigned hex output */
+		strcpy (ctx.radix_fmt, "0x%x");
+	}
+
+	if (ctx.virtual == 0) {
+		ctx.virtual = memaddr;
+	}
+#ifdef USE_SOURCE_CODE
+	if (ctx.flags & F_SYMBOL) {
+		if (symByAddr == 0)		/* no symbols loaded */
+			ctx.flags &= ~F_SYMBOL;
+		else {
+			cursym = (char *) 0;
+			symoffset = 0;
+		}
+	}
+#endif /* USE_SOURCE_CODE */
+
+	/* format each line as "XXXXXXXX: <symbol> IIIIIIII  disassembly" where,
+	   XXXXXXXX is the memory address in hex,
+	   <symbol> is the symbolic location if F_SYMBOL is set.
+	   IIIIIIII is the raw machine code in hex if F_INSTR is set,
+	   and disassembly is the disassembled machine code with numbers
+	   formatted according to the 'radix' parameter */
+
+	for (i = 0; i < num_instr; ++i, memaddr += 4, ctx.virtual += 4) {
+#ifdef USE_SOURCE_CODE
+		if (ctx.flags & F_LINENO) {
+			if ((line_info_from_addr ((Elf32_Word) ctx.virtual, filename,
+									  funcname, &line_no) == TRUE) &&
+				((line_no != last_line_no) ||
+				 (strcmp (last_funcname, funcname) != 0))) {
+				print_source_line (filename, funcname, line_no, pfunc);
+			}
+			last_line_no = line_no;
+			strcpy (last_funcname, funcname);
+		}
+#endif /* USE_SOURCE_CODE */
+
+		sprintf (ctx.data, "%08lx: ", (unsigned long) ctx.virtual);
+		ctx.datalen = 10;
+
+#ifdef USE_SOURCE_CODE
+		if (ctx.flags & F_SYMBOL) {
+			if ((symname =
+				 symbol_name_from_addr ((Elf32_Word) ctx.virtual,
+										TRUE, 0)) != 0) {
+				cursym = symname;
+				symoffset = 0;
+			} else {
+				if ((cursym == 0) &&
+					((symname =
+					  symbol_name_from_addr ((Elf32_Word) ctx.virtual,
+											 FALSE, &symoffset)) != 0)) {
+					cursym = symname;
+				} else {
+					symoffset += 4;
+				}
+			}
+
+			if (cursym != 0) {
+				sprintf (&ctx.data[ctx.datalen], "<%s+", cursym);
+				ctx.datalen = strlen (ctx.data);
+				sprintf (&ctx.data[ctx.datalen], ctx.radix_fmt, symoffset);
+				strcat (ctx.data, ">");
+				ctx.datalen = strlen (ctx.data);
+			}
+		}
+#endif /* USE_SOURCE_CODE */
+
+		ctx.instr = INSTRUCTION (memaddr);
+
+		if (ctx.flags & F_INSTR) {
+			/* Find the opcode structure for this opcode.  If one is not found
+			   then it must be an illegal instruction */
+			sprintf (&ctx.data[ctx.datalen],
+					 "   %02lx %02lx %02lx %02lx    ",
+					 ((ctx.instr >> 24) & 0xff),
+					 ((ctx.instr >> 16) & 0xff), ((ctx.instr >> 8) & 0xff),
+					 (ctx.instr & 0xff));
+			ctx.datalen += 18;
+		} else {
+			strcat (ctx.data, "   ");
+			ctx.datalen += 3;
+		}
+
+		if ((ctx.op = find_opcode (ctx.instr)) == 0) {
+			/* Illegal Opcode */
+			sprintf (&ctx.data[ctx.datalen], "        .long 0x%08lx",
+					 ctx.instr);
+			ctx.datalen += 24;
+			(*pfunc) (ctx.data);
+			continue;
+		}
+
+		if (((ctx.flags & F_SIMPLE) == 0) ||
+			(ctx.op->hfunc == 0) || ((*ctx.op->hfunc) (&ctx) == FALSE)) {
+			sprintf (&ctx.data[ctx.datalen], "%-7s ", ctx.op->name);
+			ctx.datalen += 8;
+			print_operands (&ctx);
+		}
+
+		(*pfunc) (ctx.data);
+	}
+
+	return TRUE;
+}								/* disppc */
+
+
+
+/*======================================================================
+ * Called by the disassembler to print the operands for an instruction.
+ *
+ * Arguments:
+ *	ctx		A pointer to the disassembler context record.
+ *
+ * always returns 0.
+ */
+
+int print_operands (struct ppc_ctx *ctx)
+{
+	int open_parens = 0;
+	int field;
+	unsigned long operand;
+	struct operand *opr;
+
+#ifdef USE_SOURCE_CODE
+	char *symname;
+	int offset;
+#endif /* USE_SOURCE_CODE */
+  /*------------------------------------------------------------*/
+
+	/* Walk through the operands and list each in order */
+	for (field = 0; ctx->op->fields[field] != 0; ++field) {
+		if (ctx->op->fields[field] > n_operands) {
+			continue;			/* bad operand ?! */
+		}
+
+		opr = &operands[ctx->op->fields[field] - 1];
+
+		if (opr->hint & OH_SILENT) {
+			continue;
+		}
+
+		if ((field > 0) && !open_parens) {
+			strcat (ctx->data, ",");
+			ctx->datalen++;
+		}
+
+		operand = (ctx->instr >> opr->shift) & ((1 << opr->bits) - 1);
+
+		if (opr->hint & OH_ADDR) {
+			if ((operand & (1 << (opr->bits - 1))) != 0) {
+				operand = operand - (1 << opr->bits);
+			}
+
+			if (ctx->op->hint & H_RELATIVE)
+				operand = (operand << 2) + (unsigned long) ctx->virtual;
+			else
+				operand = (operand << 2);
+
+
+			sprintf (&ctx->data[ctx->datalen], "0x%lx", operand);
+			ctx->datalen = strlen (ctx->data);
+
+#ifdef USE_SOURCE_CODE
+			if ((ctx->flags & F_SYMBOL) &&
+				((symname =
+				  symbol_name_from_addr (operand, 0, &offset)) != 0)) {
+				sprintf (&ctx->data[ctx->datalen], " <%s", symname);
+				if (offset != 0) {
+					strcat (ctx->data, "+");
+					ctx->datalen = strlen (ctx->data);
+					sprintf (&ctx->data[ctx->datalen], ctx->radix_fmt,
+							 offset);
+				}
+				strcat (ctx->data, ">");
+			}
+#endif /* USE_SOURCE_CODE */
+		}
+
+		else if (opr->hint & OH_REG) {
+			if ((operand == 0) &&
+				(opr->field == O_rA) && (ctx->op->hint & H_RA0_IS_0)) {
+				strcat (ctx->data, "0");
+			} else {
+				sprintf (&ctx->data[ctx->datalen], "r%d", (short) operand);
+			}
+
+			if (open_parens) {
+				strcat (ctx->data, ")");
+				open_parens--;
+			}
+		}
+
+		else if (opr->hint & OH_SPR) {
+			strcat (ctx->data, spr_name (operand));
+		}
+
+		else if (opr->hint & OH_TBR) {
+			strcat (ctx->data, tbr_name (operand));
+		}
+
+		else if (opr->hint & OH_LITERAL) {
+			switch (opr->field) {
+			case O_cr2:
+				strcat (ctx->data, "cr2");
+				ctx->datalen += 3;
+				break;
+
+			default:
+				break;
+			}
+		}
+
+		else {
+			sprintf (&ctx->data[ctx->datalen], ctx->radix_fmt,
+					 (unsigned short) operand);
+
+			if (open_parens) {
+				strcat (ctx->data, ")");
+				open_parens--;
+			}
+
+			else if (opr->hint & OH_OFFSET) {
+				strcat (ctx->data, "(");
+				open_parens++;
+			}
+		}
+
+		ctx->datalen = strlen (ctx->data);
+	}
+
+	return 0;
+}								/* print_operands */
+
+
+
+/*======================================================================
+ * Called to get the value of an arbitrary operand with in an instruction.
+ *
+ * Arguments:
+ *	op		The pointer to the opcode structure to which
+ *			the operands belong.
+ *
+ *	instr		The instruction (32 bits) containing the opcode
+ *			and the operands to print.  By the time that
+ *			this routine is called the operand has already
+ *			been added to the output.
+ *
+ *	field		The field (operand) to get the value of.
+ *
+ *	value		The address of an unsigned long to be filled in
+ *			with the value of the operand if it is found.  This
+ *			will only be filled in if the function returns
+ *			TRUE.  This may be passed as 0 if the value is
+ *			not required.
+ *
+ * Returns TRUE if the operand was found or FALSE if it was not.
+ */
+
+int get_operand_value (struct opcode *op, unsigned long instr,
+					   enum OP_FIELD field, unsigned long *value)
+{
+	int i;
+	struct operand *opr;
+
+  /*------------------------------------------------------------*/
+
+	if (field > n_operands) {
+		return FALSE;			/* bad operand ?! */
+	}
+
+	/* Walk through the operands and list each in order */
+	for (i = 0; op->fields[i] != 0; ++i) {
+		if (op->fields[i] != field) {
+			continue;
+		}
+
+		opr = &operands[op->fields[i] - 1];
+
+		if (value) {
+			*value = (instr >> opr->shift) & ((1 << opr->bits) - 1);
+		}
+		return TRUE;
+	}
+
+	return FALSE;
+}								/* operand_value */
+
+
+
+/*======================================================================
+ * Called by the disassembler to match an opcode value to an opcode structure.
+ *
+ * Arguments:
+ *	instr		The instruction (32 bits) to match.  This value
+ *			may contain operand values as well as the opcode
+ *			since they will be masked out anyway for this
+ *			search.
+ *
+ * Returns the address of an opcode struct (from the opcode table) if the
+ * operand successfully matched an entry, or 0 if no match was found.
+ */
+
+struct opcode *find_opcode (unsigned long instr)
+{
+	struct opcode *ptr;
+	int top = 0;
+	int bottom = n_opcodes - 1;
+	int idx;
+
+  /*------------------------------------------------------------*/
+
+	while (top <= bottom) {
+		idx = (top + bottom) >> 1;
+		ptr = &opcodes[idx];
+
+		if ((instr & ptr->mask) < ptr->opcode) {
+			bottom = idx - 1;
+		} else if ((instr & ptr->mask) > ptr->opcode) {
+			top = idx + 1;
+		} else {
+			return ptr;
+		}
+	}
+
+	return (struct opcode *) 0;
+}								/* find_opcode */
+
+
+
+/*======================================================================
+ * Called by the assembler to match an opcode name to an opcode structure.
+ *
+ * Arguments:
+ *	name		The text name of the opcode, e.g. "b", "mtspr", etc.
+ *
+ * The opcodes are sorted numerically by their instruction binary code
+ * so a search for the name cannot use the binary search used by the
+ * other find routine.
+ *
+ * Returns the address of an opcode struct (from the opcode table) if the
+ * name successfully matched an entry, or 0 if no match was found.
+ */
+
+struct opcode *find_opcode_by_name (char *name)
+{
+	int idx;
+
+  /*------------------------------------------------------------*/
+
+	downstring (name);
+
+	for (idx = 0; idx < n_opcodes; ++idx) {
+		if (!strcmp (name, opcodes[idx].name))
+			return &opcodes[idx];
+	}
+
+	return (struct opcode *) 0;
+}								/* find_opcode_by_name */
+
+
+
+/*======================================================================
+ * Convert the 'spr' operand from its numeric value to its symbolic name.
+ *
+ * Arguments:
+ *	value		The value of the 'spr' operand.  This value should
+ *			be unmodified from its encoding in the instruction.
+ *			the split-field computations will be performed
+ *			here before the switch.
+ *
+ * Returns the address of a character array containing the name of the
+ * special purpose register defined by the 'value' parameter, or the
+ * address of a character array containing "???" if no match was found.
+ */
+
+char *spr_name (int value)
+{
+	unsigned short spr;
+	static char other[10];
+	int i;
+
+  /*------------------------------------------------------------*/
+
+	/* spr is a 10 bit field whose interpretation has the high and low
+	   five-bit fields reversed from their encoding in the operand */
+
+	spr = ((value >> 5) & 0x1f) | ((value & 0x1f) << 5);
+
+	for (i = 0; i < n_sprs; ++i) {
+		if (spr == spr_map[i].spr_val)
+			return spr_map[i].spr_name;
+	}
+
+	sprintf (other, "%d", spr);
+	return other;
+}								/* spr_name */
+
+
+
+/*======================================================================
+ * Convert the 'spr' operand from its symbolic name to its numeric value
+ *
+ * Arguments:
+ *	name		The symbolic name of the 'spr' operand.  The
+ *			split-field encoding will be done by this routine.
+ *			NOTE: name can be a number.
+ *
+ * Returns the numeric value for the spr appropriate for encoding a machine
+ * instruction.  Returns 0 if unable to find the SPR.
+ */
+
+int spr_value (char *name)
+{
+	struct spr_info *sprp;
+	int spr;
+	int i;
+
+  /*------------------------------------------------------------*/
+
+	if (!name || !*name)
+		return 0;
+
+	if (isdigit ((int) name[0])) {
+		i = htonl (read_number (name));
+		spr = ((i >> 5) & 0x1f) | ((i & 0x1f) << 5);
+		return spr;
+	}
+
+	downstring (name);
+
+	for (i = 0; i < n_sprs; ++i) {
+		sprp = &spr_map[i];
+
+		if (strcmp (name, sprp->spr_name) == 0) {
+			/* spr is a 10 bit field whose interpretation has the high and low
+			   five-bit fields reversed from their encoding in the operand */
+			i = htonl (sprp->spr_val);
+			spr = ((i >> 5) & 0x1f) | ((i & 0x1f) << 5);
+
+			return spr;
+		}
+	}
+
+	return 0;
+}								/* spr_value */
+
+
+
+/*======================================================================
+ * Convert the 'tbr' operand from its numeric value to its symbolic name.
+ *
+ * Arguments:
+ *	value		The value of the 'tbr' operand.  This value should
+ *			be unmodified from its encoding in the instruction.
+ *			the split-field computations will be performed
+ *			here before the switch.
+ *
+ * Returns the address of a character array containing the name of the
+ * time base register defined by the 'value' parameter, or the address
+ * of a character array containing "???" if no match was found.
+ */
+
+char *tbr_name (int value)
+{
+	unsigned short tbr;
+
+  /*------------------------------------------------------------*/
+
+	/* tbr is a 10 bit field whose interpretation has the high and low
+	   five-bit fields reversed from their encoding in the operand */
+
+	tbr = ((value >> 5) & 0x1f) | ((value & 0x1f) << 5);
+
+	if (tbr == 268)
+		return "TBL";
+
+	else if (tbr == 269)
+		return "TBU";
+
+
+	return "???";
+}								/* tbr_name */
+
+
+
+/*======================================================================
+ * Convert the 'tbr' operand from its symbolic name to its numeric value.
+ *
+ * Arguments:
+ *	name		The symbolic name of the 'tbr' operand.  The
+ *			split-field encoding will be done by this routine.
+ *
+ * Returns the numeric value for the spr appropriate for encoding a machine
+ * instruction.  Returns 0 if unable to find the TBR.
+ */
+
+int tbr_value (char *name)
+{
+	int tbr;
+	int val;
+
+  /*------------------------------------------------------------*/
+
+	if (!name || !*name)
+		return 0;
+
+	downstring (name);
+
+	if (isdigit ((int) name[0])) {
+		val = read_number (name);
+
+		if (val != 268 && val != 269)
+			return 0;
+	} else if (strcmp (name, "tbl") == 0)
+		val = 268;
+	else if (strcmp (name, "tbu") == 0)
+		val = 269;
+	else
+		return 0;
+
+	/* tbr is a 10 bit field whose interpretation has the high and low
+	   five-bit fields reversed from their encoding in the operand */
+
+	val = htonl (val);
+	tbr = ((val >> 5) & 0x1f) | ((val & 0x1f) << 5);
+	return tbr;
+}								/* tbr_name */
+
+
+
+/*======================================================================
+ * The next several functions (handle_xxx) are the routines that handle
+ * disassembling the opcodes with simplified mnemonics.
+ *
+ * Arguments:
+ *	ctx		A pointer to the disassembler context record.
+ *
+ * Returns TRUE if the simpler form was printed or FALSE if it was not.
+ */
+
+int handle_bc (struct ppc_ctx *ctx)
+{
+	unsigned long bo;
+	unsigned long bi;
+	static struct opcode blt = { B_OPCODE (16, 0, 0), B_MASK, {O_BD, 0},
+	0, "blt", H_RELATIVE
+	};
+	static struct opcode bne =
+			{ B_OPCODE (16, 0, 0), B_MASK, {O_cr2, O_BD, 0},
+	0, "bne", H_RELATIVE
+	};
+	static struct opcode bdnz = { B_OPCODE (16, 0, 0), B_MASK, {O_BD, 0},
+	0, "bdnz", H_RELATIVE
+	};
+
+  /*------------------------------------------------------------*/
+
+	if (get_operand_value (ctx->op, ctx->instr, O_BO, &bo) == FALSE)
+		return FALSE;
+
+	if (get_operand_value (ctx->op, ctx->instr, O_BI, &bi) == FALSE)
+		return FALSE;
+
+	if ((bo == 12) && (bi == 0)) {
+		ctx->op = &blt;
+		sprintf (&ctx->data[ctx->datalen], "%-7s ", ctx->op->name);
+		ctx->datalen += 8;
+		print_operands (ctx);
+		return TRUE;
+	} else if ((bo == 4) && (bi == 10)) {
+		ctx->op = &bne;
+		sprintf (&ctx->data[ctx->datalen], "%-7s ", ctx->op->name);
+		ctx->datalen += 8;
+		print_operands (ctx);
+		return TRUE;
+	} else if ((bo == 16) && (bi == 0)) {
+		ctx->op = &bdnz;
+		sprintf (&ctx->data[ctx->datalen], "%-7s ", ctx->op->name);
+		ctx->datalen += 8;
+		print_operands (ctx);
+		return TRUE;
+	}
+
+	return FALSE;
+}								/* handle_blt */
+
+
+
+/*======================================================================
+ * Outputs source line information for the disassembler.  This should
+ * be modified in the future to lookup the actual line of source code
+ * from the file, but for now this will do.
+ *
+ * Arguments:
+ *	filename	The address of a character array containing the
+ *			absolute path and file name of the source file.
+ *
+ *	funcname	The address of a character array containing the
+ *			name of the function (not C++ demangled (yet))
+ *			to which this code belongs.
+ *
+ *	line_no		An integer specifying the source line number that
+ *			generated this code.
+ *
+ *	pfunc		The address of a function to call to print the output.
+ *
+ *
+ * Returns TRUE if it was able to output the line info, or false if it was
+ * not.
+ */
+
+int print_source_line (char *filename, char *funcname,
+					   int line_no, int (*pfunc) (const char *))
+{
+	char out_buf[256];
+
+  /*------------------------------------------------------------*/
+
+	(*pfunc) ("");				/* output a newline */
+	sprintf (out_buf, "%s %s(): line %d", filename, funcname, line_no);
+	(*pfunc) (out_buf);
+
+	return TRUE;
+}								/* print_source_line */
+
+
+
+/*======================================================================
+ * Entry point for the PPC assembler.
+ *
+ * Arguments:
+ *	asm_buf		An array of characters containing the assembly opcode
+ *			and operands to convert to a POWERPC machine
+ *			instruction.
+ *
+ * Returns the machine instruction or zero.
+ */
+
+unsigned long asmppc (unsigned long memaddr, char *asm_buf, int *err)
+{
+	struct opcode *opc;
+	struct operand *oper[MAX_OPERANDS];
+	unsigned long instr;
+	unsigned long param;
+	char *ptr = asm_buf;
+	char scratch[20];
+	int i;
+	int w_operands = 0;			/* wanted # of operands */
+	int n_operands = 0;			/* # of operands read */
+	int asm_debug = 0;
+
+  /*------------------------------------------------------------*/
+
+	if (err)
+		*err = 0;
+
+	if (get_word (&ptr, scratch) == 0)
+		return 0;
+
+	/* Lookup the opcode structure based on the opcode name */
+	if ((opc = find_opcode_by_name (scratch)) == (struct opcode *) 0) {
+		if (err)
+			*err = E_ASM_BAD_OPCODE;
+		return 0;
+	}
+
+	if (asm_debug) {
+		printf ("asmppc: Opcode = \"%s\"\n", opc->name);
+	}
+
+	for (i = 0; i < 8; ++i) {
+		if (opc->fields[i] == 0)
+			break;
+		++w_operands;
+	}
+
+	if (asm_debug) {
+		printf ("asmppc: Expecting %d operands\n", w_operands);
+	}
+
+	instr = opc->opcode;
+
+	/* read each operand */
+	while (n_operands < w_operands) {
+
+		oper[n_operands] = &operands[opc->fields[n_operands] - 1];
+
+		if (oper[n_operands]->hint & OH_SILENT) {
+			/* Skip silent operands, they are covered in opc->opcode */
+
+			if (asm_debug) {
+				printf ("asmppc: Operand %d \"%s\" SILENT\n", n_operands,
+						oper[n_operands]->name);
+			}
+
+			++n_operands;
+			continue;
+		}
+
+		if (get_word (&ptr, scratch) == 0)
+			break;
+
+		if (asm_debug) {
+			printf ("asmppc: Operand %d \"%s\" : \"%s\"\n", n_operands,
+					oper[n_operands]->name, scratch);
+		}
+
+		if ((param = parse_operand (memaddr, opc, oper[n_operands],
+									scratch, err)) == -1)
+			return 0;
+
+		instr |= param;
+		++n_operands;
+	}
+
+	if (n_operands < w_operands) {
+		if (err)
+			*err = E_ASM_NUM_OPERANDS;
+		return 0;
+	}
+
+	if (asm_debug) {
+		printf ("asmppc: Instruction = 0x%08lx\n", instr);
+	}
+
+	return instr;
+}								/* asmppc */
+
+
+
+/*======================================================================
+ * Called by the assembler to interpret a single operand
+ *
+ * Arguments:
+ *	ctx		A pointer to the disassembler context record.
+ *
+ * Returns 0 if the operand is ok, or -1 if it is bad.
+ */
+
+int parse_operand (unsigned long memaddr, struct opcode *opc,
+				   struct operand *oper, char *txt, int *err)
+{
+	long data;
+	long mask;
+	int is_neg = 0;
+
+  /*------------------------------------------------------------*/
+
+	mask = (1 << oper->bits) - 1;
+
+	if (oper->hint & OH_ADDR) {
+		data = read_number (txt);
+
+		if (opc->hint & H_RELATIVE)
+			data = data - memaddr;
+
+		if (data < 0)
+			is_neg = 1;
+
+		data >>= 2;
+		data &= (mask >> 1);
+
+		if (is_neg)
+			data |= 1 << (oper->bits - 1);
+	}
+
+	else if (oper->hint & OH_REG) {
+		if (txt[0] == 'r' || txt[0] == 'R')
+			txt++;
+		else if (txt[0] == '%' && (txt[1] == 'r' || txt[1] == 'R'))
+			txt += 2;
+
+		data = read_number (txt);
+		if (data > 31) {
+			if (err)
+				*err = E_ASM_BAD_REGISTER;
+			return -1;
+		}
+
+		data = htonl (data);
+	}
+
+	else if (oper->hint & OH_SPR) {
+		if ((data = spr_value (txt)) == 0) {
+			if (err)
+				*err = E_ASM_BAD_SPR;
+			return -1;
+		}
+	}
+
+	else if (oper->hint & OH_TBR) {
+		if ((data = tbr_value (txt)) == 0) {
+			if (err)
+				*err = E_ASM_BAD_TBR;
+			return -1;
+		}
+	}
+
+	else {
+		data = htonl (read_number (txt));
+	}
+
+	return (data & mask) << oper->shift;
+}								/* parse_operand */
+
+
+char *asm_error_str (int err)
+{
+	switch (err) {
+	case E_ASM_BAD_OPCODE:
+		return "Bad opcode";
+	case E_ASM_NUM_OPERANDS:
+		return "Bad number of operands";
+	case E_ASM_BAD_REGISTER:
+		return "Bad register number";
+	case E_ASM_BAD_SPR:
+		return "Bad SPR name or number";
+	case E_ASM_BAD_TBR:
+		return "Bad TBR name or number";
+	}
+
+	return "";
+}								/* asm_error_str */
+
+
+
+/*======================================================================
+ * Copy a word from one buffer to another, ignores leading white spaces.
+ *
+ * Arguments:
+ *	src		The address of a character pointer to the
+ *			source buffer.
+ *	dest		A pointer to a character buffer to write the word
+ *			into.
+ *
+ * Returns the number of non-white space characters copied, or zero.
+ */
+
+int get_word (char **src, char *dest)
+{
+	char *ptr = *src;
+	int nchars = 0;
+
+  /*------------------------------------------------------------*/
+
+	/* Eat white spaces */
+	while (*ptr && isblank (*ptr))
+		ptr++;
+
+	if (*ptr == 0) {
+		*src = ptr;
+		return 0;
+	}
+
+	/* Find the text of the word */
+	while (*ptr && !isblank (*ptr) && (*ptr != ','))
+		dest[nchars++] = *ptr++;
+	ptr = (*ptr == ',') ? ptr + 1 : ptr;
+	dest[nchars] = 0;
+
+	*src = ptr;
+	return nchars;
+}								/* get_word */
+
+
+
+/*======================================================================
+ * Convert a numeric string to a number, be aware of base notations.
+ *
+ * Arguments:
+ *	txt		The numeric string.
+ *
+ * Returns the converted numeric value.
+ */
+
+long read_number (char *txt)
+{
+	long val;
+	int is_neg = 0;
+
+  /*------------------------------------------------------------*/
+
+	if (txt == 0 || *txt == 0)
+		return 0;
+
+	if (*txt == '-') {
+		is_neg = 1;
+		++txt;
+	}
+
+	if (txt[0] == '0' && (txt[1] == 'x' || txt[1] == 'X'))	/* hex */
+		val = simple_strtoul (&txt[2], NULL, 16);
+	else						/* decimal */
+		val = simple_strtoul (txt, NULL, 10);
+
+	if (is_neg)
+		val = -val;
+
+	return val;
+}								/* read_number */
+
+
+int downstring (char *s)
+{
+	if (!s || !*s)
+		return 0;
+
+	while (*s) {
+		if (isupper (*s))
+			*s = tolower (*s);
+		s++;
+	}
+
+	return 0;
+}								/* downstring */
+
+
+
+/*======================================================================
+ * Examines the instruction at the current address and determines the
+ * next address to be executed.  This will take into account branches
+ * of different types so that a "step" and "next" operations can be
+ * supported.
+ *
+ * Arguments:
+ *	nextaddr	The address (to be filled in) of the next
+ *			instruction to execute.  This will only be a valid
+ *			address if TRUE is returned.
+ *
+ *	step_over	A flag indicating how to compute addresses for
+ *			branch statements:
+ *			 TRUE  = Step over the branch (next)
+ *			 FALSE = step into the branch (step)
+ *
+ * Returns TRUE if it was able to compute the address.  Returns FALSE if
+ * it has a problem reading the current instruction or one of the registers.
+ */
+
+int find_next_address (unsigned char *nextaddr, int step_over,
+					   struct pt_regs *regs)
+{
+	unsigned long pc;			/* SRR0 register from PPC */
+	unsigned long ctr;			/* CTR register from PPC */
+	unsigned long cr;			/* CR register from PPC */
+	unsigned long lr;			/* LR register from PPC */
+	unsigned long instr;		/* instruction at SRR0 */
+	unsigned long next;			/* computed instruction for 'next' */
+	unsigned long step;			/* computed instruction for 'step' */
+	unsigned long addr = 0;		/* target address operand */
+	unsigned long aa = 0;		/* AA operand */
+	unsigned long lk = 0;		/* LK operand */
+	unsigned long bo = 0;		/* BO operand */
+	unsigned long bi = 0;		/* BI operand */
+	struct opcode *op = 0;		/* opcode structure for 'instr' */
+	int ctr_ok = 0;
+	int cond_ok = 0;
+	int conditional = 0;
+	int branch = 0;
+
+  /*------------------------------------------------------------*/
+
+	if (nextaddr == 0 || regs == 0) {
+		printf ("find_next_address: bad args");
+		return FALSE;
+	}
+
+	pc = regs->nip & 0xfffffffc;
+	instr = INSTRUCTION (pc);
+
+	if ((op = find_opcode (instr)) == (struct opcode *) 0) {
+		printf ("find_next_address: can't parse opcode 0x%lx", instr);
+		return FALSE;
+	}
+
+	ctr = regs->ctr;
+	cr = regs->ccr;
+	lr = regs->link;
+
+	switch (op->opcode) {
+	case B_OPCODE (16, 0, 0):	/* bc */
+	case B_OPCODE (16, 0, 1):	/* bcl */
+	case B_OPCODE (16, 1, 0):	/* bca */
+	case B_OPCODE (16, 1, 1):	/* bcla */
+		if (!get_operand_value (op, instr, O_BD, &addr) ||
+			!get_operand_value (op, instr, O_BO, &bo) ||
+			!get_operand_value (op, instr, O_BI, &bi) ||
+			!get_operand_value (op, instr, O_AA, &aa) ||
+			!get_operand_value (op, instr, O_LK, &lk))
+			return FALSE;
+
+		if ((addr & (1 << 13)) != 0)
+			addr = addr - (1 << 14);
+		addr <<= 2;
+		conditional = 1;
+		branch = 1;
+		break;
+
+	case I_OPCODE (18, 0, 0):	/* b */
+	case I_OPCODE (18, 0, 1):	/* bl */
+	case I_OPCODE (18, 1, 0):	/* ba */
+	case I_OPCODE (18, 1, 1):	/* bla */
+		if (!get_operand_value (op, instr, O_LI, &addr) ||
+			!get_operand_value (op, instr, O_AA, &aa) ||
+			!get_operand_value (op, instr, O_LK, &lk))
+			return FALSE;
+
+		if ((addr & (1 << 23)) != 0)
+			addr = addr - (1 << 24);
+		addr <<= 2;
+		conditional = 0;
+		branch = 1;
+		break;
+
+	case XL_OPCODE (19, 528, 0):	/* bcctr */
+	case XL_OPCODE (19, 528, 1):	/* bcctrl */
+		if (!get_operand_value (op, instr, O_BO, &bo) ||
+			!get_operand_value (op, instr, O_BI, &bi) ||
+			!get_operand_value (op, instr, O_LK, &lk))
+			return FALSE;
+
+		addr = ctr;
+		aa = 1;
+		conditional = 1;
+		branch = 1;
+		break;
+
+	case XL_OPCODE (19, 16, 0):	/* bclr */
+	case XL_OPCODE (19, 16, 1):	/* bclrl */
+		if (!get_operand_value (op, instr, O_BO, &bo) ||
+			!get_operand_value (op, instr, O_BI, &bi) ||
+			!get_operand_value (op, instr, O_LK, &lk))
+			return FALSE;
+
+		addr = lr;
+		aa = 1;
+		conditional = 1;
+		branch = 1;
+		break;
+
+	default:
+		conditional = 0;
+		branch = 0;
+		break;
+	}
+
+	if (conditional) {
+		switch ((bo & 0x1e) >> 1) {
+		case 0:				/* 0000y */
+			if (--ctr != 0)
+				ctr_ok = 1;
+
+			cond_ok = !(cr & (1 << (31 - bi)));
+			break;
+
+		case 1:				/* 0001y */
+			if (--ctr == 0)
+				ctr_ok = 1;
+
+			cond_ok = !(cr & (1 << (31 - bi)));
+			break;
+
+		case 2:				/* 001zy */
+			ctr_ok = 1;
+			cond_ok = !(cr & (1 << (31 - bi)));
+			break;
+
+		case 4:				/* 0100y */
+			if (--ctr != 0)
+				ctr_ok = 1;
+
+			cond_ok = cr & (1 << (31 - bi));
+			break;
+
+		case 5:				/* 0101y */
+			if (--ctr == 0)
+				ctr_ok = 1;
+
+			cond_ok = cr & (1 << (31 - bi));
+			break;
+
+		case 6:				/* 011zy */
+			ctr_ok = 1;
+			cond_ok = cr & (1 << (31 - bi));
+			break;
+
+		case 8:				/* 1z00y */
+			if (--ctr != 0)
+				ctr_ok = cond_ok = 1;
+			break;
+
+		case 9:				/* 1z01y */
+			if (--ctr == 0)
+				ctr_ok = cond_ok = 1;
+			break;
+
+		case 10:				/* 1z1zz */
+			ctr_ok = cond_ok = 1;
+			break;
+		}
+	}
+
+	if (branch && (!conditional || (ctr_ok && cond_ok))) {
+		if (aa)
+			step = addr;
+		else
+			step = addr + pc;
+
+		if (lk)
+			next = pc + 4;
+		else
+			next = step;
+	} else {
+		step = next = pc + 4;
+	}
+
+	if (step_over == TRUE)
+		*(unsigned long *) nextaddr = next;
+	else
+		*(unsigned long *) nextaddr = step;
+
+	return TRUE;
+}								/* find_next_address */
+
+
+/*
+ * Copyright (c) 2000 William L. Pitts and W. Gerald Hicks
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are freely
+ * permitted provided that the above copyright notice and this
+ * paragraph and the following disclaimer are duplicated in all
+ * such forms.
+ *
+ * This software is provided "AS IS" and without any express or
+ * implied warranties, including, without limitation, the implied
+ * warranties of merchantability and fitness for a particular
+ * purpose.
+ */
+
+#endif	/* CONFIG_COMMANDS & CFG_CMD_BEDBUG */