summaryrefslogtreecommitdiff
path: root/common
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2010-09-16 14:01:53 +0200
committerStefan Roese <sr@denx.de>2010-09-23 08:49:49 +0200
commit8a805df13615667ebdcc9f3a3a6fbf6c7778a992 (patch)
tree67e61ba7679d82a64dbcb3d55344a31a22a7e6da /common
parentab25e880ca9d508b7a807aa969105af32c3e6e51 (diff)
downloadu-boot-imx-8a805df13615667ebdcc9f3a3a6fbf6c7778a992.zip
u-boot-imx-8a805df13615667ebdcc9f3a3a6fbf6c7778a992.tar.gz
u-boot-imx-8a805df13615667ebdcc9f3a3a6fbf6c7778a992.tar.bz2
ppc4xx/fdt/flash: Change fdt_fixup_nor_flash_node() to not rely on cs size
This patch changes the behaviour of the fdt_fixup_nor_flash_node() function. Now it doesn't patch the size of the "reg" property with the chip-select size, but with the size returned from the new function flash_get_bank_size(). This function will return per weak default the flash size of the bank (bank = chip-select numer) detected by the flash driver. If this does not fit your needs, this function may be overridden by a board specific one. For this the parameters needed to be changed. So I intentionally squashed the PPC4xx stuff using this routine into this patch. Otherwise it would not be git-bisectable anymore. The board specific function for the AMCC/APM Ebony eval board is now included in this patch version. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Detlev Zundel <dzu@denx.de> Cc: Gerald Van Baren <vanbaren@cideas.com> Cc: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'common')
-rw-r--r--common/fdt_support.c51
1 files changed, 41 insertions, 10 deletions
diff --git a/common/fdt_support.c b/common/fdt_support.c
index aef4fe2..6f32e3f 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -591,11 +591,30 @@ int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose) {
#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
/*
+ * Provide a weak default function to return the flash bank size.
+ * There might be multiple non-identical flash chips connected to one
+ * chip-select, so we need to pass an index as well.
+ */
+u32 __flash_get_bank_size(int cs, int idx)
+{
+ extern flash_info_t flash_info[];
+
+ /*
+ * As default, a simple 1:1 mapping is provided. Boards with
+ * a different mapping need to supply a board specific mapping
+ * routine.
+ */
+ return flash_info[cs].size;
+}
+u32 flash_get_bank_size(int cs, int idx)
+ __attribute__((weak, alias("__flash_get_bank_size")));
+
+/*
* This function can be used to update the size in the "reg" property
- * of the NOR FLASH device nodes. This is necessary for boards with
+ * of all NOR FLASH device nodes. This is necessary for boards with
* non-fixed NOR FLASH sizes.
*/
-int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
+int fdt_fixup_nor_flash_size(void *blob)
{
char compat[][16] = { "cfi-flash", "jedec-flash" };
int off;
@@ -607,19 +626,31 @@ int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
for (i = 0; i < 2; i++) {
off = fdt_node_offset_by_compatible(blob, -1, compat[i]);
while (off != -FDT_ERR_NOTFOUND) {
+ int idx;
+
/*
- * Found one compatible node, now check if this one
- * has the correct CS
+ * Found one compatible node, so fixup the size
+ * int its reg properties
*/
prop = fdt_get_property_w(blob, off, "reg", &len);
if (prop) {
+ int tuple_size = 3 * sizeof(reg);
+
+ /*
+ * There might be multiple reg-tuples,
+ * so loop through them all
+ */
+ len /= tuple_size;
reg = (u32 *)&prop->data[0];
- if (reg[0] == cs) {
- reg[2] = size;
+ for (idx = 0; idx < len; idx++) {
+ /*
+ * Update size in reg property
+ */
+ reg[2] = flash_get_bank_size(reg[0],
+ idx);
fdt_setprop(blob, off, "reg", reg,
- 3 * sizeof(u32));
-
- return 0;
+ tuple_size);
+ reg += tuple_size;
}
}
@@ -629,7 +660,7 @@ int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
}
}
- return -1;
+ return 0;
}
#endif