diff options
| author | Macpaul Lin <macpaul@andestech.com> | 2011-04-11 20:45:32 +0000 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2011-04-30 21:04:25 +0200 |
| commit | 0abddf82d54c704cf066524235b6414333e8d087 (patch) | |
| tree | 3ae31f30d1d61056be409afe1ea98a21646262ac /common | |
| parent | dea6386b715827e080a9fa6e6d706f2bdf8a998e (diff) | |
| download | u-boot-imx-0abddf82d54c704cf066524235b6414333e8d087.zip u-boot-imx-0abddf82d54c704cf066524235b6414333e8d087.tar.gz u-boot-imx-0abddf82d54c704cf066524235b6414333e8d087.tar.bz2 | |
cmd_ide: enhance new feature "CONFIG_IDE_AHB"
Although most IDE controller is designed to be connected to PCI bridge,
there are still some IDE controller support AHB interface for SoC design.
The driver implementation of these IDE-AHB controllers differ from other
IDE-PCI controller, some additional registers and commands access is required
during CMD/DATA I/O. Hence a configuration "CONFIG_IDE_AHB" in cmd_ide.c is
required to be defined to support these kinds of SoC controllers. Such as
Faraday's FTIDE020 series and Global Unichip's UINF-0301.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Diffstat (limited to 'common')
| -rw-r--r-- | common/cmd_ide.c | 29 |
1 files changed, 28 insertions, 1 deletions
diff --git a/common/cmd_ide.c b/common/cmd_ide.c index a1f7e57..e7952ff 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -517,8 +517,20 @@ __ide_outb(int dev, int port, unsigned char val) { debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", dev, port, val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); + +#if defined(CONFIG_IDE_AHB) + if (port) { + /* write command */ + ide_write_register(dev, port, val); + } else { + /* write data */ + outb(val, (ATA_CURR_BASE(dev))); + } +#else outb(val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); +#endif } + void ide_outb (int dev, int port, unsigned char val) __attribute__((weak, alias("__ide_outb"))); @@ -526,7 +538,13 @@ unsigned char inline __ide_inb(int dev, int port) { uchar val; + +#if defined(CONFIG_IDE_AHB) + val = ide_read_register(dev, port); +#else val = inb((ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); +#endif + debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", dev, port, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)), val); return val; @@ -695,6 +713,7 @@ void ide_init (void) ide_dev_desc[i].blksz=0; ide_dev_desc[i].lba=0; ide_dev_desc[i].block_read=ide_read; + ide_dev_desc[i].block_write = ide_write; if (!ide_bus_ok[IDE_BUS(i)]) continue; ide_led (led, 1); /* LED on */ @@ -902,7 +921,11 @@ output_data(int dev, ulong *sect_buf, int words) static void output_data(int dev, ulong *sect_buf, int words) { - outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words<<1); +#if defined(CONFIG_IDE_AHB) + ide_write_data(dev, sect_buf, words); +#else + outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words << 1); +#endif } #endif /* CONFIG_IDE_SWAP_IO */ @@ -960,7 +983,11 @@ input_data(int dev, ulong *sect_buf, int words) static void input_data(int dev, ulong *sect_buf, int words) { +#if defined(CONFIG_IDE_AHB) + ide_read_data(dev, sect_buf, words); +#else insw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words << 1); +#endif } #endif /* CONFIG_IDE_SWAP_IO */ |