* Code cleanup, mostly for GCC-3.3.x

* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Add support for CompactFlash for the CPC45 Board.

6 files changed, 49 insertions, 44 deletions

diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 4c5540f..ca83473 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -92,21 +92,21 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
 	}
 
-#if defined(CONFIG_ETH1ADDR)
+#if defined(CONFIG_HAS_ETH1)
 	puts ("\neth1addr    =");
 	for (i=0; i<6; ++i) {
 		printf ("%c%02X", i ? ':' : ' ', bd->bi_enet1addr[i]);
 	}
 #endif
 
-#if defined(CONFIG_ETH2ADDR)
+#if defined(CONFIG_HAS_ETH2)
        puts ("\neth2addr    =");
        for (i=0; i<6; ++i) {
 		printf ("%c%02X", i ? ':' : ' ', bd->bi_enet2addr[i]);
 	}
 #endif
 
-#if defined(CONFIG_ETH3ADDR)
+#if defined(CONFIG_HAS_ETH3)
        puts ("\neth3addr    =");
        for (i=0; i<6; ++i) {
 		printf ("%c%02X", i ? ':' : ' ', bd->bi_enet3addr[i]);
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 5ecf888..b2728ab 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -164,6 +164,10 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last,
 			sect = s_last[bank];
 			addr_first = (sect == s_end) ? b_end + 1: info->start[sect + 1];
 			(*s_count) += s_last[bank] - s_first[bank] + 1;
+		} else if (addr_first >= info->start[0] && addr_first < b_end) {
+			puts ("Error: start address not on sector boundary\n");
+			rcode = 1;
+			break;
 		} else if (s_last[bank] >= 0) {
 			puts ("Error: cannot span across banks when they are"
 			       " mapped in reverse order\n");
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 77a0494..851ba52 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -144,7 +144,7 @@ block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE];
 /* ------------------------------------------------------------------------- */
 
 #ifdef CONFIG_IDE_LED
-#if !defined(CONFIG_KUP4K) &&  !defined(CONFIG_KUP4X) &&!defined(CONFIG_BMS2003)
+#if !defined(CONFIG_KUP4K) &&  !defined(CONFIG_KUP4X) &&!defined(CONFIG_BMS2003) &&!defined(CONFIG_CPC45)
 static void  ide_led   (uchar led, uchar status);
 #else
 extern void  ide_led   (uchar led, uchar status);
@@ -1548,11 +1548,12 @@ static void ide_reset (void)
 
 /* ------------------------------------------------------------------------- */
 
-#if defined(CONFIG_IDE_LED) && \
-   !defined(CONFIG_AMIGAONEG3SE) && \
-   !defined(CONFIG_KUP4K) && \
-   !defined(CONFIG_KUP4X) && \
-   !defined(CONFIG_HMI10)
+#if defined(CONFIG_IDE_LED)	&& \
+   !defined(CONFIG_AMIGAONEG3SE)&& \
+   !defined(CONFIG_CPC45)	&& \
+   !defined(CONFIG_HMI10)	&& \
+   !defined(CONFIG_KUP4K)	&& \
+   !defined(CONFIG_KUP4X)
 
 static	uchar	led_buffer = 0;		/* Buffer for current LED status	*/
 
@@ -1578,7 +1579,6 @@ static void ide_led (uchar led, uchar status)
  * ATAPI Support
  */
 
-
 #undef	ATAPI_DEBUG
 
 #ifdef	ATAPI_DEBUG
@@ -1661,7 +1661,6 @@ output_data_shorts(int dev, ushort *sect_buf, int shorts)
 	outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, shorts);
 }
 
-
 static void
 input_data_shorts(int dev, ushort *sect_buf, int shorts)
 {
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index 1387e89..31f2ba2 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -67,6 +67,8 @@
 #include <asm/arch/pxa-regs.h>
 #endif
 
+#include <asm/io.h>
+
 #if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || \
     ((CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD))
 
@@ -540,9 +542,18 @@ static int check_ide_device (int slot)
 
 	ide_devices_found |= (1 << slot);
 
+#if CONFIG_CPC45
+#else
 	/* set I/O area in config reg -> only valid for ARGOSY D5!!! */
 	*((uchar *)(addr + config_base)) = 1;
-
+#endif
+#if 0
+	printf("\n## Config_base = %04x ###\n", config_base);
+	printf("Configuration Option Register: %02x @ %x\n", readb(addr + config_base), addr + config_base);
+	printf("Card Configuration and Status Register: %02x\n", readb(addr + config_base + 2));
+	printf("Pin Replacement Register Register: %02x\n", readb(addr + config_base + 4));
+	printf("Socket and Copy Register: %02x\n", readb(addr + config_base + 6));
+#endif
 	return (0);
 }
 #endif	/* CONFIG_IDE_8xx_PCCARD */
diff --git a/common/cmd_universe.c b/common/cmd_universe.c
index 6388546..a8febff 100644
--- a/common/cmd_universe.c
+++ b/common/cmd_universe.c
@@ -28,20 +28,8 @@
 
 #include <universe.h>
 
-
 #if (CONFIG_COMMANDS & CFG_CMD_UNIVERSE)
 
-#undef DBG
-
-#ifdef DBG
-# define UNI_DBG(fmt)	        printf fmt
-#else
-# define UNI_DBG(fmt)
-#endif
-
-#define UNI_PRINT(fmt)	        printf fmt
-
-
 #define PCI_VENDOR PCI_VENDOR_ID_TUNDRA
 #define PCI_DEVICE PCI_DEVICE_ID_TUNDRA_CA91C042
 
@@ -87,18 +75,18 @@ int universe_init(void)
 	val &= ~0xf;
 	dev->uregs = (UNIVERSE *)val;
 
-	UNI_DBG(("UNIVERSE-Base    : %p\n", dev->uregs));
+	debug ("UNIVERSE-Base    : %p\n", dev->uregs);
 
 	/* check mapping  */
-	UNI_DBG((" Read via mapping, PCI_ID = %08X\n", readl(&dev->uregs->pci_id)));
+	debug (" Read via mapping, PCI_ID = %08X\n", readl(&dev->uregs->pci_id));
 	if (((PCI_DEVICE <<16) | PCI_VENDOR) !=  readl(&dev->uregs->pci_id)) {
-		UNI_PRINT(("UNIVERSE: Cannot read PCI-ID via Mapping: %08x\n",
-			   readl(&dev->uregs->pci_id)));
+		printf ("UNIVERSE: Cannot read PCI-ID via Mapping: %08x\n",
+			readl(&dev->uregs->pci_id));
 		result = -1;
 		goto break_30;
 	}
 
-	UNI_DBG(("PCI_BS = %08X\n", readl(&dev->uregs->pci_bs)));
+	debug ("PCI_BS = %08X\n", readl(&dev->uregs->pci_bs));
 
 	dev->pci_bs = readl(&dev->uregs->pci_bs);
 
@@ -154,12 +142,12 @@ int universe_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr, int si
 	}
 
 	if (i == 4) {
-		UNI_PRINT(("universe: No Image available\n"));
+		printf ("universe: No Image available\n");
 		result = -1;
 		goto exit_10;
 	}
 
-	UNI_DBG(("universe: Using image %d\n", i));
+	debug ("universe: Using image %d\n", i);
 
 	writel(pciAddr , &dev->uregs->lsi[i].bs);
 	writel((pciAddr + size), &dev->uregs->lsi[i].bd);
@@ -219,11 +207,11 @@ int universe_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr, int si
 
 	writel(ctl, &dev->uregs->lsi[i].ctl);
 
-	UNI_DBG(("universe: window-addr=%p\n", &dev->uregs->lsi[i].ctl));
-	UNI_DBG(("universe: pci slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->lsi[i].ctl)));
-	UNI_DBG(("universe: pci slave window[%d] bs=%08x\n", i, readl(&dev->uregs->lsi[i].bs)));
-	UNI_DBG(("universe: pci slave window[%d] bd=%08x\n", i, readl(&dev->uregs->lsi[i].bd)));
-	UNI_DBG(("universe: pci slave window[%d] to=%08x\n", i, readl(&dev->uregs->lsi[i].to)));
+	debug ("universe: window-addr=%p\n", &dev->uregs->lsi[i].ctl);
+	debug ("universe: pci slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->lsi[i].ctl));
+	debug ("universe: pci slave window[%d] bs=%08x\n", i, readl(&dev->uregs->lsi[i].bs));
+	debug ("universe: pci slave window[%d] bd=%08x\n", i, readl(&dev->uregs->lsi[i].bd));
+	debug ("universe: pci slave window[%d] to=%08x\n", i, readl(&dev->uregs->lsi[i].to));
 
 	return 0;
 
@@ -251,12 +239,12 @@ int universe_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr, int si
 	}
 
 	if (i == 4) {
-		UNI_PRINT(("universe: No Image available\n"));
+		printf ("universe: No Image available\n");
 		result = -1;
 		goto exit_10;
 	}
 
-	UNI_DBG(("universe: Using image %d\n", i));
+	debug ("universe: Using image %d\n", i);
 
 	writel(vmeAddr , &dev->uregs->vsi[i].bs);
 	writel((vmeAddr + size), &dev->uregs->vsi[i].bd);
@@ -304,11 +292,11 @@ int universe_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr, int si
 
 	writel(ctl, &dev->uregs->vsi[i].ctl);
 
-	UNI_DBG(("universe: window-addr=%p\n", &dev->uregs->vsi[i].ctl));
-	UNI_DBG(("universe: vme slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->vsi[i].ctl)));
-	UNI_DBG(("universe: vme slave window[%d] bs=%08x\n", i, readl(&dev->uregs->vsi[i].bs)));
-	UNI_DBG(("universe: vme slave window[%d] bd=%08x\n", i, readl(&dev->uregs->vsi[i].bd)));
-	UNI_DBG(("universe: vme slave window[%d] to=%08x\n", i, readl(&dev->uregs->vsi[i].to)));
+	debug ("universe: window-addr=%p\n", &dev->uregs->vsi[i].ctl);
+	debug ("universe: vme slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->vsi[i].ctl));
+	debug ("universe: vme slave window[%d] bs=%08x\n", i, readl(&dev->uregs->vsi[i].bs));
+	debug ("universe: vme slave window[%d] bd=%08x\n", i, readl(&dev->uregs->vsi[i].bd));
+	debug ("universe: vme slave window[%d] to=%08x\n", i, readl(&dev->uregs->vsi[i].to));
 
 	return 0;
 
diff --git a/common/environment.c b/common/environment.c
index 3d8493a..61a8d24 100644
--- a/common/environment.c
+++ b/common/environment.c
@@ -130,6 +130,9 @@ env_t environment __PPCENV__ = {
 #ifdef	CONFIG_ETH2ADDR
 	"eth2addr="	MK_STR(CONFIG_ETH2ADDR)		"\0"
 #endif
+#ifdef	CONFIG_ETH3ADDR
+	"eth3addr="	MK_STR(CONFIG_ETH3ADDR)		"\0"
+#endif
 #ifdef	CONFIG_ETHPRIME
 	"ethprime="	CONFIG_ETHPRIME			"\0"
 #endif