* Code cleanup:

  - remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)

1 files changed, 274 insertions, 285 deletions

diff --git a/common/dlmalloc.src b/common/dlmalloc.src
index 12b85bb..32a38bc 100644
--- a/common/dlmalloc.src
+++ b/common/dlmalloc.src
@@ -8,8 +8,8 @@
 * VERSION 2.6.6  Sun Mar  5 19:10:03 2000  Doug Lea  (dl at gee)
 
    Note: There may be an updated version of this malloc obtainable at
-           ftp://g.oswego.edu/pub/misc/malloc.c
-         Check before installing!
+	   ftp://g.oswego.edu/pub/misc/malloc.c
+	 Check before installing!
 
 * Why use this malloc?
 
@@ -86,7 +86,7 @@
        and status information.
 
   Minimum allocated size: 4-byte ptrs:  16 bytes    (including 4 overhead)
-                          8-byte ptrs:  24/32 bytes (including, 4/8 overhead)
+			  8-byte ptrs:  24/32 bytes (including, 4/8 overhead)
 
        When a chunk is freed, 12 (for 4byte ptrs) or 20 (for 8 byte
        ptrs but 4 byte size) or 24 (for 8/8) additional bytes are
@@ -98,7 +98,7 @@
        pointer to something of the minimum allocatable size.
 
   Maximum allocated size: 4-byte size_t: 2^31 -  8 bytes
-                          8-byte size_t: 2^63 - 16 bytes
+			  8-byte size_t: 2^63 - 16 bytes
 
        It is assumed that (possibly signed) size_t bit values suffice to
        represent chunk sizes. `Possibly signed' is due to the fact
@@ -114,11 +114,11 @@
        make the normal worst-case wastage 15 bytes (i.e., up to 15
        more bytes will be allocated than were requested in malloc), with
        two exceptions:
-         1. Because requests for zero bytes allocate non-zero space,
-            the worst case wastage for a request of zero bytes is 24 bytes.
-         2. For requests >= mmap_threshold that are serviced via
-            mmap(), the worst case wastage is 8 bytes plus the remainder
-            from a system page (the minimal mmap unit); typically 4096 bytes.
+	 1. Because requests for zero bytes allocate non-zero space,
+	    the worst case wastage for a request of zero bytes is 24 bytes.
+	 2. For requests >= mmap_threshold that are serviced via
+	    mmap(), the worst case wastage is 8 bytes plus the remainder
+	    from a system page (the minimal mmap unit); typically 4096 bytes.
 
 * Limitations
 
@@ -371,8 +371,8 @@ void* memset(void*, int, size_t);
 void* memcpy(void*, const void*, size_t);
 #else
 #ifdef WIN32
-// On Win32 platforms, 'memset()' and 'memcpy()' are already declared in
-// 'windows.h'
+/* On Win32 platforms, 'memset()' and 'memcpy()' are already declared in */
+/* 'windows.h' */
 #else
 Void_t* memset();
 Void_t* memcpy();
@@ -392,14 +392,14 @@ do {                                                                          \
   if(mzsz <= 9*sizeof(mzsz)) {                                                \
     INTERNAL_SIZE_T* mz = (INTERNAL_SIZE_T*) (charp);                         \
     if(mzsz >= 5*sizeof(mzsz)) {     *mz++ = 0;                               \
-                                     *mz++ = 0;                               \
+				     *mz++ = 0;                               \
       if(mzsz >= 7*sizeof(mzsz)) {   *mz++ = 0;                               \
-                                     *mz++ = 0;                               \
-        if(mzsz >= 9*sizeof(mzsz)) { *mz++ = 0;                               \
-                                     *mz++ = 0; }}}                           \
-                                     *mz++ = 0;                               \
-                                     *mz++ = 0;                               \
-                                     *mz   = 0;                               \
+				     *mz++ = 0;                               \
+	if(mzsz >= 9*sizeof(mzsz)) { *mz++ = 0;                               \
+				     *mz++ = 0; }}}                           \
+				     *mz++ = 0;                               \
+				     *mz++ = 0;                               \
+				     *mz   = 0;                               \
   } else memset((charp), 0, mzsz);                                            \
 } while(0)
 
@@ -410,14 +410,14 @@ do {                                                                          \
     INTERNAL_SIZE_T* mcsrc = (INTERNAL_SIZE_T*) (src);                        \
     INTERNAL_SIZE_T* mcdst = (INTERNAL_SIZE_T*) (dest);                       \
     if(mcsz >= 5*sizeof(mcsz)) {     *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++;                     \
+				     *mcdst++ = *mcsrc++;                     \
       if(mcsz >= 7*sizeof(mcsz)) {   *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++;                     \
-        if(mcsz >= 9*sizeof(mcsz)) { *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++; }}}                 \
-                                     *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++;                     \
-                                     *mcdst   = *mcsrc  ;                     \
+				     *mcdst++ = *mcsrc++;                     \
+	if(mcsz >= 9*sizeof(mcsz)) { *mcdst++ = *mcsrc++;                     \
+				     *mcdst++ = *mcsrc++; }}}                 \
+				     *mcdst++ = *mcsrc++;                     \
+				     *mcdst++ = *mcsrc++;                     \
+				     *mcdst   = *mcsrc  ;                     \
   } else memcpy(dest, src, mcsz);                                             \
 } while(0)
 
@@ -557,7 +557,6 @@ do {                                                                          \
 #endif
 
 
-
 /*
 
   This version of malloc supports the standard SVID/XPG mallinfo
@@ -621,7 +620,6 @@ struct mallinfo {
 #define M_MMAP_MAX          -4
 
 
-
 #ifndef DEFAULT_TRIM_THRESHOLD
 #define DEFAULT_TRIM_THRESHOLD (128 * 1024)
 #endif
@@ -685,11 +683,11 @@ struct mallinfo {
       retain whenever sbrk is called. It is used in two ways internally:
 
       * When sbrk is called to extend the top of the arena to satisfy
-        a new malloc request, this much padding is added to the sbrk
-        request.
+	a new malloc request, this much padding is added to the sbrk
+	request.
 
       * When malloc_trim is called automatically from free(),
-        it is used as the `pad' argument.
+	it is used as the `pad' argument.
 
       In both cases, the actual amount of padding is rounded
       so that the end of the arena is always a system page boundary.
@@ -735,15 +733,15 @@ struct mallinfo {
 
       However, it has the disadvantages that:
 
-         1. The space cannot be reclaimed, consolidated, and then
-            used to service later requests, as happens with normal chunks.
-         2. It can lead to more wastage because of mmap page alignment
-            requirements
-         3. It causes malloc performance to be more dependent on host
-            system memory management support routines which may vary in
-            implementation quality and may impose arbitrary
-            limitations. Generally, servicing a request via normal
-            malloc steps is faster than going through a system's mmap.
+	 1. The space cannot be reclaimed, consolidated, and then
+	    used to service later requests, as happens with normal chunks.
+	 2. It can lead to more wastage because of mmap page alignment
+	    requirements
+	 3. It causes malloc performance to be more dependent on host
+	    system memory management support routines which may vary in
+	    implementation quality and may impose arbitrary
+	    limitations. Generally, servicing a request via normal
+	    malloc steps is faster than going through a system's mmap.
 
       All together, these considerations should lead you to use mmap
       only for relatively large requests.
@@ -752,7 +750,6 @@ struct mallinfo {
 */
 
 
-
 #ifndef DEFAULT_MMAP_MAX
 #if HAVE_MMAP
 #define DEFAULT_MMAP_MAX       (64)
@@ -765,15 +762,15 @@ struct mallinfo {
     M_MMAP_MAX is the maximum number of requests to simultaneously
       service using mmap. This parameter exists because:
 
-         1. Some systems have a limited number of internal tables for
-            use by mmap.
-         2. In most systems, overreliance on mmap can degrade overall
-            performance.
-         3. If a program allocates many large regions, it is probably
-            better off using normal sbrk-based allocation routines that
-            can reclaim and reallocate normal heap memory. Using a
-            small value allows transition into this mode after the
-            first few allocations.
+	 1. Some systems have a limited number of internal tables for
+	    use by mmap.
+	 2. In most systems, overreliance on mmap can degrade overall
+	    performance.
+	 3. If a program allocates many large regions, it is probably
+	    better off using normal sbrk-based allocation routines that
+	    can reclaim and reallocate normal heap memory. Using a
+	    small value allows transition into this mode after the
+	    first few allocations.
 
       Setting to 0 disables all use of mmap.  If HAVE_MMAP is not set,
       the default value is 0, and attempts to set it to non-zero values
@@ -781,8 +778,6 @@ struct mallinfo {
 */
 
 
-
-
 /*
     USE_DL_PREFIX will prefix all public routines with the string 'dl'.
       Useful to quickly avoid procedure declaration conflicts and linker
@@ -793,8 +788,6 @@ struct mallinfo {
 /* #define USE_DL_PREFIX */
 
 
-
-
 /*
 
   Special defines for linux libc
@@ -998,7 +991,7 @@ void gcleanup ()
 		rval = VirtualFree ((void*)gAddressBase,
 							gNextAddress - gAddressBase,
 							MEM_DECOMMIT);
-        assert (rval);
+	assert (rval);
 	}
 	while (head)
 	{
@@ -1023,24 +1016,24 @@ void* findRegion (void* start_address, unsigned long size)
 			return start_address;
 		else
 		{
-			// Requested region is not available so see if the
-			// next region is available.  Set 'start_address'
-			// to the next region and call 'VirtualQuery()'
-			// again.
+			/* Requested region is not available so see if the */
+			/* next region is available.  Set 'start_address' */
+			/* to the next region and call 'VirtualQuery()' */
+			/* again. */
 
 			start_address = (char*)info.BaseAddress + info.RegionSize;
 
-			// Make sure we start looking for the next region
-			// on the *next* 64K boundary.  Otherwise, even if
-			// the new region is free according to
-			// 'VirtualQuery()', the subsequent call to
-			// 'VirtualAlloc()' (which follows the call to
-			// this routine in 'wsbrk()') will round *down*
-			// the requested address to a 64K boundary which
-			// we already know is an address in the
-			// unavailable region.  Thus, the subsequent call
-			// to 'VirtualAlloc()' will fail and bring us back
-			// here, causing us to go into an infinite loop.
+			/* Make sure we start looking for the next region */
+			/* on the *next* 64K boundary.  Otherwise, even if */
+			/* the new region is free according to */
+			/* 'VirtualQuery()', the subsequent call to */
+			/* 'VirtualAlloc()' (which follows the call to */
+			/* this routine in 'wsbrk()') will round *down* */
+			/* the requested address to a 64K boundary which */
+			/* we already know is an address in the */
+			/* unavailable region.  Thus, the subsequent call */
+			/* to 'VirtualAlloc()' will fail and bring us back */
+			/* here, causing us to go into an infinite loop. */
 
 			start_address =
 				(void *) AlignPage64K((unsigned long) start_address);
@@ -1077,9 +1070,9 @@ gAllocatedSize))
 				gAddressBase = gNextAddress =
 					(unsigned int)VirtualAlloc (new_address, new_size,
 												MEM_RESERVE, PAGE_NOACCESS);
-				// repeat in case of race condition
-				// The region that we found has been snagged
-				// by another thread
+				/* repeat in case of race condition */
+				/* The region that we found has been snagged */
+				/* by another thread */
 			}
 			while (gAddressBase == 0);
 
@@ -1167,17 +1160,17 @@ typedef struct malloc_chunk* mchunkptr;
 
 
     chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Size of previous chunk, if allocated            | |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Size of chunk, in bytes                         |P|
+	    |             Size of previous chunk, if allocated            | |
+	    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+	    |             Size of chunk, in bytes                         |P|
       mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             User data starts here...                          .
-            .                                                               .
-            .             (malloc_usable_space() bytes)                     .
-            .                                                               |
+	    |             User data starts here...                          .
+	    .                                                               .
+	    .             (malloc_usable_space() bytes)                     .
+	    .                                                               |
 nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Size of chunk                                     |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+	    |             Size of chunk                                     |
+	    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 
 
     Where "chunk" is the front of the chunk for the purpose of most of
@@ -1191,20 +1184,20 @@ nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     Free chunks are stored in circular doubly-linked lists, and look like this:
 
     chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Size of previous chunk                            |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+	    |             Size of previous chunk                            |
+	    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     `head:' |             Size of chunk, in bytes                         |P|
       mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Forward pointer to next chunk in list             |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Back pointer to previous chunk in list            |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Unused space (may be 0 bytes long)                .
-            .                                                               .
-            .                                                               |
+	    |             Forward pointer to next chunk in list             |
+	    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+	    |             Back pointer to previous chunk in list            |
+	    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+	    |             Unused space (may be 0 bytes long)                .
+	    .                                                               .
+	    .                                                               |
 nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     `foot:' |             Size of chunk, in bytes                           |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+	    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 
     The P (PREV_INUSE) bit, stored in the unused low-order bit of the
     chunk size (which is always a multiple of two words), is an in-use
@@ -1221,16 +1214,16 @@ nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     The two exceptions to all this are
 
      1. The special chunk `top', which doesn't bother using the
-        trailing size field since there is no
-        next contiguous chunk that would have to index off it. (After
-        initialization, `top' is forced to always exist.  If it would
-        become less than MINSIZE bytes long, it is replenished via
-        malloc_extend_top.)
+	trailing size field since there is no
+	next contiguous chunk that would have to index off it. (After
+	initialization, `top' is forced to always exist.  If it would
+	become less than MINSIZE bytes long, it is replenished via
+	malloc_extend_top.)
 
      2. Chunks allocated via mmap, which have the second-lowest-order
-        bit (IS_MMAPPED) set in their size fields.  Because they are
-        never merged or traversed from any other chunk, they have no
-        foot size or inuse information.
+	bit (IS_MMAPPED) set in their size fields.  Because they are
+	never merged or traversed from any other chunk, they have no
+	foot size or inuse information.
 
     Available chunks are kept in any of several places (all declared below):
 
@@ -1273,7 +1266,6 @@ nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 */
 
 
-
 
 
 
@@ -1506,7 +1498,7 @@ static mbinptr av_[NAV * 2 + 2] = {
  ((((unsigned long)(sz)) >> 9) <=   84) ? 110 + (((unsigned long)(sz)) >> 12): \
  ((((unsigned long)(sz)) >> 9) <=  340) ? 119 + (((unsigned long)(sz)) >> 15): \
  ((((unsigned long)(sz)) >> 9) <= 1364) ? 124 + (((unsigned long)(sz)) >> 18): \
-                                          126)
+					  126)
 /*
   bins for chunks < 512 are all spaced 8 bytes apart, and hold
   identically sized chunks. This is exploited in malloc.
@@ -1794,7 +1786,6 @@ static void do_check_malloced_chunk(p, s) mchunkptr p; INTERNAL_SIZE_T s;
   (last_remainder->fd = last_remainder->bk = last_remainder)
 
 
-
 
 
 
@@ -1995,7 +1986,7 @@ static void malloc_extend_top(nb) INTERNAL_SIZE_T nb;
     /* Guarantee the next brk will be at a page boundary */
 
     correction += ((((unsigned long)(brk + sbrk_size))+(pagesz-1)) &
-                   ~(pagesz - 1)) - ((unsigned long)(brk + sbrk_size));
+		   ~(pagesz - 1)) - ((unsigned long)(brk + sbrk_size));
 
     /* Allocate correction */
     new_brk = (char*)(MORECORE (correction));
@@ -2016,20 +2007,20 @@ static void malloc_extend_top(nb) INTERNAL_SIZE_T nb;
       /* If not enough space to do this, then user did something very wrong */
       if (old_top_size < MINSIZE)
       {
-        set_head(top, PREV_INUSE); /* will force null return from malloc */
-        return;
+	set_head(top, PREV_INUSE); /* will force null return from malloc */
+	return;
       }
 
       /* Also keep size a multiple of MALLOC_ALIGNMENT */
       old_top_size = (old_top_size - 3*SIZE_SZ) & ~MALLOC_ALIGN_MASK;
       set_head_size(old_top, old_top_size);
       chunk_at_offset(old_top, old_top_size          )->size =
-        SIZE_SZ|PREV_INUSE;
+	SIZE_SZ|PREV_INUSE;
       chunk_at_offset(old_top, old_top_size + SIZE_SZ)->size =
-        SIZE_SZ|PREV_INUSE;
+	SIZE_SZ|PREV_INUSE;
       /* If possible, release the rest. */
       if (old_top_size >= MINSIZE)
-        fREe(chunk2mem(old_top));
+	fREe(chunk2mem(old_top));
     }
   }
 
@@ -2060,43 +2051,43 @@ static void malloc_extend_top(nb) INTERNAL_SIZE_T nb;
     From there, the first successful of the following steps is taken:
 
       1. The bin corresponding to the request size is scanned, and if
-         a chunk of exactly the right size is found, it is taken.
+	 a chunk of exactly the right size is found, it is taken.
 
       2. The most recently remaindered chunk is used if it is big
-         enough.  This is a form of (roving) first fit, used only in
-         the absence of exact fits. Runs of consecutive requests use
-         the remainder of the chunk used for the previous such request
-         whenever possible. This limited use of a first-fit style
-         allocation strategy tends to give contiguous chunks
-         coextensive lifetimes, which improves locality and can reduce
-         fragmentation in the long run.
+	 enough.  This is a form of (roving) first fit, used only in
+	 the absence of exact fits. Runs of consecutive requests use
+	 the remainder of the chunk used for the previous such request
+	 whenever possible. This limited use of a first-fit style
+	 allocation strategy tends to give contiguous chunks
+	 coextensive lifetimes, which improves locality and can reduce
+	 fragmentation in the long run.
 
       3. Other bins are scanned in increasing size order, using a
-         chunk big enough to fulfill the request, and splitting off
-         any remainder.  This search is strictly by best-fit; i.e.,
-         the smallest (with ties going to approximately the least
-         recently used) chunk that fits is selected.
+	 chunk big enough to fulfill the request, and splitting off
+	 any remainder.  This search is strictly by best-fit; i.e.,
+	 the smallest (with ties going to approximately the least
+	 recently used) chunk that fits is selected.
 
       4. If large enough, the chunk bordering the end of memory
-         (`top') is split off. (This use of `top' is in accord with
-         the best-fit search rule.  In effect, `top' is treated as
-         larger (and thus less well fitting) than any other available
-         chunk since it can be extended to be as large as necessary
-         (up to system limitations).
+	 (`top') is split off. (This use of `top' is in accord with
+	 the best-fit search rule.  In effect, `top' is treated as
+	 larger (and thus less well fitting) than any other available
+	 chunk since it can be extended to be as large as necessary
+	 (up to system limitations).
 
       5. If the request size meets the mmap threshold and the
-         system supports mmap, and there are few enough currently
-         allocated mmapped regions, and a call to mmap succeeds,
-         the request is allocated via direct memory mapping.
+	 system supports mmap, and there are few enough currently
+	 allocated mmapped regions, and a call to mmap succeeds,
+	 the request is allocated via direct memory mapping.
 
       6. Otherwise, the top of memory is extended by
-         obtaining more space from the system (normally using sbrk,
-         but definable to anything else via the MORECORE macro).
-         Memory is gathered from the system (in system page-sized
-         units) in a way that allows chunks obtained across different
-         sbrk calls to be consolidated, but does not require
-         contiguous memory. Thus, it should be safe to intersperse
-         mallocs with other sbrk calls.
+	 obtaining more space from the system (normally using sbrk,
+	 but definable to anything else via the MORECORE macro).
+	 Memory is gathered from the system (in system page-sized
+	 units) in a way that allows chunks obtained across different
+	 sbrk calls to be consolidated, but does not require
+	 contiguous memory. Thus, it should be safe to intersperse
+	 mallocs with other sbrk calls.
 
 
       All allocations are made from the the `lowest' part of any found
@@ -2173,16 +2164,16 @@ Void_t* mALLOc(bytes) size_t bytes;
 
       if (remainder_size >= (long)MINSIZE) /* too big */
       {
-        --idx; /* adjust to rescan below after checking last remainder */
-        break;
+	--idx; /* adjust to rescan below after checking last remainder */
+	break;
       }
 
       else if (remainder_size >= 0) /* exact fit */
       {
-        unlink(victim, bck, fwd);
-        set_inuse_bit_at_offset(victim, victim_size);
-        check_malloced_chunk(victim, nb);
-        return chunk2mem(victim);
+	unlink(victim, bck, fwd);
+	set_inuse_bit_at_offset(victim, victim_size);
+	check_malloced_chunk(victim, nb);
+	return chunk2mem(victim);
       }
     }
 
@@ -2239,8 +2230,8 @@ Void_t* mALLOc(bytes) size_t bytes;
       block <<= 1;
       while ((block & binblocks) == 0)
       {
-        idx += BINBLOCKWIDTH;
-        block <<= 1;
+	idx += BINBLOCKWIDTH;
+	block <<= 1;
       }
     }
 
@@ -2253,34 +2244,34 @@ Void_t* mALLOc(bytes) size_t bytes;
       /* For each bin in this block ... */
       do
       {
-        /* Find and use first big enough chunk ... */
-
-        for (victim = last(bin); victim != bin; victim = victim->bk)
-        {
-          victim_size = chunksize(victim);
-          remainder_size = victim_size - nb;
-
-          if (remainder_size >= (long)MINSIZE) /* split */
-          {
-            remainder = chunk_at_offset(victim, nb);
-            set_head(victim, nb | PREV_INUSE);
-            unlink(victim, bck, fwd);
-            link_last_remainder(remainder);
-            set_head(remainder, remainder_size | PREV_INUSE);
-            set_foot(remainder, remainder_size);
-            check_malloced_chunk(victim, nb);
-            return chunk2mem(victim);
-          }
-
-          else if (remainder_size >= 0)  /* take */
-          {
-            set_inuse_bit_at_offset(victim, victim_size);
-            unlink(victim, bck, fwd);
-            check_malloced_chunk(victim, nb);
-            return chunk2mem(victim);
-          }
-
-        }
+	/* Find and use first big enough chunk ... */
+
+	for (victim = last(bin); victim != bin; victim = victim->bk)
+	{
+	  victim_size = chunksize(victim);
+	  remainder_size = victim_size - nb;
+
+	  if (remainder_size >= (long)MINSIZE) /* split */
+	  {
+	    remainder = chunk_at_offset(victim, nb);
+	    set_head(victim, nb | PREV_INUSE);
+	    unlink(victim, bck, fwd);
+	    link_last_remainder(remainder);
+	    set_head(remainder, remainder_size | PREV_INUSE);
+	    set_foot(remainder, remainder_size);
+	    check_malloced_chunk(victim, nb);
+	    return chunk2mem(victim);
+	  }
+
+	  else if (remainder_size >= 0)  /* take */
+	  {
+	    set_inuse_bit_at_offset(victim, victim_size);
+	    unlink(victim, bck, fwd);
+	    check_malloced_chunk(victim, nb);
+	    return chunk2mem(victim);
+	  }
+
+	}
 
        bin = next_bin(bin);
 
@@ -2290,12 +2281,12 @@ Void_t* mALLOc(bytes) size_t bytes;
 
       do   /* Possibly backtrack to try to clear a partial block */
       {
-        if ((startidx & (BINBLOCKWIDTH - 1)) == 0)
-        {
-          binblocks &= ~block;
-          break;
-        }
-        --startidx;
+	if ((startidx & (BINBLOCKWIDTH - 1)) == 0)
+	{
+	  binblocks &= ~block;
+	  break;
+	}
+	--startidx;
        q = prev_bin(q);
       } while (first(q) == q);
 
@@ -2303,14 +2294,14 @@ Void_t* mALLOc(bytes) size_t bytes;
 
       if ( (block <<= 1) <= binblocks && (block != 0) )
       {
-        while ((block & binblocks) == 0)
-        {
-          idx += BINBLOCKWIDTH;
-          block <<= 1;
-        }
+	while ((block & binblocks) == 0)
+	{
+	  idx += BINBLOCKWIDTH;
+	  block <<= 1;
+	}
       }
       else
-        break;
+	break;
     }
   }
 
@@ -2324,7 +2315,7 @@ Void_t* mALLOc(bytes) size_t bytes;
 #if HAVE_MMAP
     /* If big and would otherwise need to extend, try to use mmap instead */
     if ((unsigned long)nb >= (unsigned long)mmap_threshold &&
-        (victim = mmap_chunk(nb)) != 0)
+	(victim = mmap_chunk(nb)) != 0)
       return chunk2mem(victim);
 #endif
 
@@ -2357,13 +2348,13 @@ Void_t* mALLOc(bytes) size_t bytes;
        2. If the chunk was allocated via mmap, it is release via munmap().
 
        3. If a returned chunk borders the current high end of memory,
-          it is consolidated into the top, and if the total unused
-          topmost memory exceeds the trim threshold, malloc_trim is
-          called.
+	  it is consolidated into the top, and if the total unused
+	  topmost memory exceeds the trim threshold, malloc_trim is
+	  called.
 
        4. Other chunks are consolidated as they arrive, and
-          placed in corresponding bins. (This includes the case of
-          consolidating with the current `last_remainder').
+	  placed in corresponding bins. (This includes the case of
+	  consolidating with the current `last_remainder').
 
 */
 
@@ -2575,22 +2566,22 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes;
       /* Forward into top only if a remainder */
       if (next == top)
       {
-        if ((long)(nextsize + newsize) >= (long)(nb + MINSIZE))
-        {
-          newsize += nextsize;
-          top = chunk_at_offset(oldp, nb);
-          set_head(top, (newsize - nb) | PREV_INUSE);
-          set_head_size(oldp, nb);
-          return chunk2mem(oldp);
-        }
+	if ((long)(nextsize + newsize) >= (long)(nb + MINSIZE))
+	{
+	  newsize += nextsize;
+	  top = chunk_at_offset(oldp, nb);
+	  set_head(top, (newsize - nb) | PREV_INUSE);
+	  set_head_size(oldp, nb);
+	  return chunk2mem(oldp);
+	}
       }
 
       /* Forward into next chunk */
       else if (((long)(nextsize + newsize) >= (long)(nb)))
       {
-        unlink(next, bck, fwd);
-        newsize  += nextsize;
-        goto split;
+	unlink(next, bck, fwd);
+	newsize  += nextsize;
+	goto split;
       }
     }
     else
@@ -2610,45 +2601,45 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes;
 
       if (next != 0)
       {
-        /* into top */
-        if (next == top)
-        {
-          if ((long)(nextsize + prevsize + newsize) >= (long)(nb + MINSIZE))
-          {
-            unlink(prev, bck, fwd);
-            newp = prev;
-            newsize += prevsize + nextsize;
-            newmem = chunk2mem(newp);
-            MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
-            top = chunk_at_offset(newp, nb);
-            set_head(top, (newsize - nb) | PREV_INUSE);
-            set_head_size(newp, nb);
-            return newmem;
-          }
-        }
-
-        /* into next chunk */
-        else if (((long)(nextsize + prevsize + newsize) >= (long)(nb)))
-        {
-          unlink(next, bck, fwd);
-          unlink(prev, bck, fwd);
-          newp = prev;
-          newsize += nextsize + prevsize;
-          newmem = chunk2mem(newp);
-          MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
-          goto split;
-        }
+	/* into top */
+	if (next == top)
+	{
+	  if ((long)(nextsize + prevsize + newsize) >= (long)(nb + MINSIZE))
+	  {
+	    unlink(prev, bck, fwd);
+	    newp = prev;
+	    newsize += prevsize + nextsize;
+	    newmem = chunk2mem(newp);
+	    MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
+	    top = chunk_at_offset(newp, nb);
+	    set_head(top, (newsize - nb) | PREV_INUSE);
+	    set_head_size(newp, nb);
+	    return newmem;
+	  }
+	}
+
+	/* into next chunk */
+	else if (((long)(nextsize + prevsize + newsize) >= (long)(nb)))
+	{
+	  unlink(next, bck, fwd);
+	  unlink(prev, bck, fwd);
+	  newp = prev;
+	  newsize += nextsize + prevsize;
+	  newmem = chunk2mem(newp);
+	  MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
+	  goto split;
+	}
       }
 
       /* backward only */
       if (prev != 0 && (long)(prevsize + newsize) >= (long)nb)
       {
-        unlink(prev, bck, fwd);
-        newp = prev;
-        newsize += prevsize;
-        newmem = chunk2mem(newp);
-        MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
-        goto split;
+	unlink(prev, bck, fwd);
+	newp = prev;
+	newsize += prevsize;
+	newmem = chunk2mem(newp);
+	MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
+	goto split;
       }
     }
 
@@ -2980,25 +2971,25 @@ int malloc_trim(pad) size_t pad;
 
       if (new_brk == (char*)(MORECORE_FAILURE)) /* sbrk failed? */
       {
-        /* Try to figure out what we have */
-        current_brk = (char*)(MORECORE (0));
-        top_size = current_brk - (char*)top;
-        if (top_size >= (long)MINSIZE) /* if not, we are very very dead! */
-        {
-          sbrked_mem = current_brk - sbrk_base;
-          set_head(top, top_size | PREV_INUSE);
-        }
-        check_chunk(top);
-        return 0;
+	/* Try to figure out what we have */
+	current_brk = (char*)(MORECORE (0));
+	top_size = current_brk - (char*)top;
+	if (top_size >= (long)MINSIZE) /* if not, we are very very dead! */
+	{
+	  sbrked_mem = current_brk - sbrk_base;
+	  set_head(top, top_size | PREV_INUSE);
+	}
+	check_chunk(top);
+	return 0;
       }
 
       else
       {
-        /* Success. Adjust top accordingly. */
-        set_head(top, (top_size - extra) | PREV_INUSE);
-        sbrked_mem -= extra;
-        check_chunk(top);
-        return 1;
+	/* Success. Adjust top accordingly. */
+	set_head(top, (top_size - extra) | PREV_INUSE);
+	sbrked_mem -= extra;
+	check_chunk(top);
+	return 1;
       }
     }
   }
@@ -3064,9 +3055,9 @@ static void malloc_update_mallinfo()
 #if DEBUG
       check_free_chunk(p);
       for (q = next_chunk(p);
-           q < top && inuse(q) && (long)(chunksize(q)) >= (long)MINSIZE;
-           q = next_chunk(q))
-        check_inuse_chunk(q);
+	   q < top && inuse(q) && (long)(chunksize(q)) >= (long)MINSIZE;
+	   q = next_chunk(q))
+	check_inuse_chunk(q);
 #endif
       avail += chunksize(p);
       navail++;
@@ -3103,14 +3094,14 @@ void malloc_stats()
 {
   malloc_update_mallinfo();
   fprintf(stderr, "max system bytes = %10u\n",
-          (unsigned int)(max_total_mem));
+	  (unsigned int)(max_total_mem));
   fprintf(stderr, "system bytes     = %10u\n",
-          (unsigned int)(sbrked_mem + mmapped_mem));
+	  (unsigned int)(sbrked_mem + mmapped_mem));
   fprintf(stderr, "in use bytes     = %10u\n",
-          (unsigned int)(current_mallinfo.uordblks + mmapped_mem));
+	  (unsigned int)(current_mallinfo.uordblks + mmapped_mem));
 #if HAVE_MMAP
   fprintf(stderr, "max mmap regions = %10u\n",
-          (unsigned int)max_n_mmaps);
+	  (unsigned int)max_n_mmaps);
 #endif
 }
 
@@ -3173,17 +3164,17 @@ History:
     V2.6.6 Sun Dec  5 07:42:19 1999  Doug Lea  (dl at gee)
       * return null for negative arguments
       * Added Several WIN32 cleanups from Martin C. Fong <mcfong@yahoo.com>
-         * Add 'LACKS_SYS_PARAM_H' for those systems without 'sys/param.h'
-          (e.g. WIN32 platforms)
-         * Cleanup up header file inclusion for WIN32 platforms
-         * Cleanup code to avoid Microsoft Visual C++ compiler complaints
-         * Add 'USE_DL_PREFIX' to quickly allow co-existence with existing
-           memory allocation routines
-         * Set 'malloc_getpagesize' for WIN32 platforms (needs more work)
-         * Use 'assert' rather than 'ASSERT' in WIN32 code to conform to
+	 * Add 'LACKS_SYS_PARAM_H' for those systems without 'sys/param.h'
+	  (e.g. WIN32 platforms)
+	 * Cleanup up header file inclusion for WIN32 platforms
+	 * Cleanup code to avoid Microsoft Visual C++ compiler complaints
+	 * Add 'USE_DL_PREFIX' to quickly allow co-existence with existing
+	   memory allocation routines
+	 * Set 'malloc_getpagesize' for WIN32 platforms (needs more work)
+	 * Use 'assert' rather than 'ASSERT' in WIN32 code to conform to
 	   usage of 'assert' in non-WIN32 code
-         * Improve WIN32 'sbrk()' emulation's 'findRegion()' routine to
-           avoid infinite loop
+	 * Improve WIN32 'sbrk()' emulation's 'findRegion()' routine to
+	   avoid infinite loop
       * Always call 'fREe()' rather than 'free()'
 
     V2.6.5 Wed Jun 17 15:57:31 1998  Doug Lea  (dl at gee)
@@ -3195,13 +3186,13 @@ History:
       * Added anonymously donated WIN32 sbrk emulation
       * Malloc, calloc, getpagesize: add optimizations from Raymond Nijssen
       * malloc_extend_top: fix mask error that caused wastage after
-        foreign sbrks
+	foreign sbrks
       * Add linux mremap support code from HJ Liu
 
     V2.6.2 Tue Dec  5 06:52:55 1995  Doug Lea  (dl at gee)
       * Integrated most documentation with the code.
       * Add support for mmap, with help from
-        Wolfram Gloger (Gloger@lrz.uni-muenchen.de).
+	Wolfram Gloger (Gloger@lrz.uni-muenchen.de).
       * Use last_remainder in more cases.
       * Pack bins using idea from  colin@nyx10.cs.du.edu
       * Use ordered bins instead of best-fit threshhold
@@ -3209,34 +3200,34 @@ History:
       * Support another case of realloc via move into top
       * Fix error occuring when initial sbrk_base not word-aligned.
       * Rely on page size for units instead of SBRK_UNIT to
-        avoid surprises about sbrk alignment conventions.
+	avoid surprises about sbrk alignment conventions.
       * Add mallinfo, mallopt. Thanks to Raymond Nijssen
-        (raymond@es.ele.tue.nl) for the suggestion.
+	(raymond@es.ele.tue.nl) for the suggestion.
       * Add `pad' argument to malloc_trim and top_pad mallopt parameter.
       * More precautions for cases where other routines call sbrk,
-        courtesy of Wolfram Gloger (Gloger@lrz.uni-muenchen.de).
+	courtesy of Wolfram Gloger (Gloger@lrz.uni-muenchen.de).
       * Added macros etc., allowing use in linux libc from
-        H.J. Lu (hjl@gnu.ai.mit.edu)
+	H.J. Lu (hjl@gnu.ai.mit.edu)
       * Inverted this history list
 
     V2.6.1 Sat Dec  2 14:10:57 1995  Doug Lea  (dl at gee)
       * Re-tuned and fixed to behave more nicely with V2.6.0 changes.
       * Removed all preallocation code since under current scheme
-        the work required to undo bad preallocations exceeds
-        the work saved in good cases for most test programs.
+	the work required to undo bad preallocations exceeds
+	the work saved in good cases for most test programs.
       * No longer use return list or unconsolidated bins since
-        no scheme using them consistently outperforms those that don't
-        given above changes.
+	no scheme using them consistently outperforms those that don't
+	given above changes.
       * Use best fit for very large chunks to prevent some worst-cases.
       * Added some support for debugging
 
     V2.6.0 Sat Nov  4 07:05:23 1995  Doug Lea  (dl at gee)
       * Removed footers when chunks are in use. Thanks to
-        Paul Wilson (wilson@cs.texas.edu) for the suggestion.
+	Paul Wilson (wilson@cs.texas.edu) for the suggestion.
 
     V2.5.4 Wed Nov  1 07:54:51 1995  Doug Lea  (dl at gee)
       * Added malloc_trim, with help from Wolfram Gloger
-        (wmglo@Dent.MED.Uni-Muenchen.DE).
+	(wmglo@Dent.MED.Uni-Muenchen.DE).
 
     V2.5.3 Tue Apr 26 10:16:01 1994  Doug Lea  (dl at g)
 
@@ -3252,11 +3243,11 @@ History:
     V2.5.1 Sat Aug 14 15:40:43 1993  Doug Lea  (dl at g)
       * faster bin computation & slightly different binning
       * merged all consolidations to one part of malloc proper
-         (eliminating old malloc_find_space & malloc_clean_bin)
+	 (eliminating old malloc_find_space & malloc_clean_bin)
       * Scan 2 returns chunks (not just 1)
       * Propagate failure in realloc if malloc returns 0
       * Add stuff to allow compilation on non-ANSI compilers
-          from kpv@research.att.com
+	  from kpv@research.att.com
 
     V2.5 Sat Aug  7 07:41:59 1993  Doug Lea  (dl at g.oswego.edu)
       * removed potential for odd address access in prev_chunk
@@ -3264,13 +3255,11 @@ History:
       * misc cosmetics and a bit more internal documentation
       * anticosmetics: mangled names in macros to evade debugger strangeness
       * tested on sparc, hp-700, dec-mips, rs6000
-          with gcc & native cc (hp, dec only) allowing
-          Detlefs & Zorn comparison study (in SIGPLAN Notices.)
+	  with gcc & native cc (hp, dec only) allowing
+	  Detlefs & Zorn comparison study (in SIGPLAN Notices.)
 
     Trial version Fri Aug 28 13:14:29 1992  Doug Lea  (dl at g.oswego.edu)
       * Based loosely on libg++-1.2X malloc. (It retains some of the overall
-         structure of old version,  but most details differ.)
+	 structure of old version,  but most details differ.)
 
 */
-
-