NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)

This is a re-submission of the patch by Harald Welte
<laforge@openmoko.org> with minor modifications for rebase and changes
as suggested by Scott Wood <scottwood@freescale.com> [1] [2].

This patch enables the environment partition to have a run-time dynamic
location (offset) in the NAND flash.  The reason for this is simply that
all NAND flashes have factory-default bad blocks, and a fixed compile
time offset would mean that sometimes the environment partition would
live inside factory bad blocks. Since the number of factory default
blocks can be quite high (easily 1.3MBytes in current standard
components), it is not economic to keep that many spare blocks inside
the environment partition.

With this patch and CONFIG_ENV_OFFSET_OOB enabled, the location of the
environment partition is stored in the out-of-band (OOB) data of the
first block in flash. Since the first block is where most systems boot
from, the vendors guarantee that the first block is not a factory
default block.

This patch introduces the 'nand env.oob' command, which can be called
from the u-boot command line. 'nand env.oob get' reads the address of
the environment partition from the OOB data, 'nand env.oob set
{offset,partition-name}' allows the setting of the marker by specifying
a numeric offset or a partition name.

[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/43916
[2] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/79195

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Acked-by: Harald Welte <laforge@gnumonks.org>

1 files changed, 106 insertions, 1 deletions

diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index ea80555..a4c67c1 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -4,6 +4,10 @@
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
  *
+ * Ported 'dynenv' to 'nand env.oob' command
+ * (C) 2010 Nanometrics, Inc.
+ * 'dynenv' -- Dynamic environment offset in NAND OOB
+ * (C) Copyright 2006-2007 OpenMoko, Inc.
  * Added 16-bit nand support
  * (C) 2004 Texas Instruments
  */
@@ -193,6 +197,90 @@ static void do_nand_status(nand_info_t *nand)
 }
 #endif
 
+#ifdef CONFIG_ENV_OFFSET_OOB
+unsigned long nand_env_oob_offset;
+
+int do_nand_env_oob(cmd_tbl_t *cmdtp, nand_info_t *nand,
+				 int argc, char * const argv[])
+{
+	int ret;
+	uint32_t oob_buf[ENV_OFFSET_SIZE/sizeof(uint32_t)];
+
+	char *cmd = argv[1];
+
+	if (!strcmp(cmd, "get")) {
+		ret = get_nand_env_oob(nand, &nand_env_oob_offset);
+		if (!ret)
+			printf("0x%08lx\n", nand_env_oob_offset);
+		else
+			return 1;
+	} else if (!strcmp(cmd, "set")) {
+		ulong addr;
+		size_t dummy_size;
+		struct mtd_oob_ops ops;
+
+		if (argc < 3)
+			goto usage;
+
+		if (arg_off_size(argc-2, argv + 2, nand, &addr,
+						  &dummy_size) < 0) {
+			printf("Offset or partition name expected\n");
+			return 1;
+		}
+
+		if (nand->oobavail < ENV_OFFSET_SIZE) {
+			printf("Insufficient available OOB bytes: %d OOB bytes"
+			    " available but %d required for env.oob support\n",
+								nand->oobavail,
+							      ENV_OFFSET_SIZE);
+			return 1;
+		}
+
+		if ((addr & (nand->erasesize - 1)) != 0) {
+			printf("Environment offset must be block-aligned\n");
+			return 1;
+		}
+
+		ops.datbuf = NULL;
+		ops.mode = MTD_OOB_AUTO;
+		ops.ooboffs = 0;
+		ops.ooblen = ENV_OFFSET_SIZE;
+		ops.oobbuf = (void *) oob_buf;
+
+		oob_buf[0] = ENV_OOB_MARKER;
+		oob_buf[1] = addr / nand->erasesize;
+
+		ret = nand->write_oob(nand, ENV_OFFSET_SIZE, &ops);
+		if (!ret) {
+			ret = get_nand_env_oob(nand, &nand_env_oob_offset);
+			if (ret) {
+				printf("Error reading env offset in OOB\n");
+				return ret;
+			}
+
+			if (addr != nand_env_oob_offset) {
+				printf("Verification of env offset in OOB "
+				       "failed: 0x%08lx expected but got "
+				       "0x%08lx\n", addr, nand_env_oob_offset);
+				return 1;
+			}
+		} else {
+			printf("Error writing OOB block 0\n");
+			return ret;
+		}
+	} else {
+		goto usage;
+	}
+
+	return ret;
+
+usage:
+	cmd_usage(cmdtp);
+	return 1;
+}
+
+#endif
+
 static void nand_print_info(int idx)
 {
 	nand_info_t *nand = &nand_info[idx];
@@ -272,9 +360,19 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 	    strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 &&
 	    strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 &&
 	    strcmp(cmd, "biterr") != 0 &&
-	    strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 )
+	    strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0
+#ifdef CONFIG_ENV_OFFSET_OOB
+	    && strcmp(cmd, "env.oob") != 0
+#endif
+	    )
 		goto usage;
 
+#ifdef CONFIG_ENV_OFFSET_OOB
+	/* this command operates only on the first nand device */
+	if (strcmp(cmd, "env.oob") == 0)
+	      return do_nand_env_oob(cmdtp, &nand_info[0], argc - 1, argv + 1);
+#endif
+
 	/* the following commands operate on the current device */
 	if (nand_curr_device < 0 || nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
 	    !nand_info[nand_curr_device].name) {
@@ -502,6 +600,13 @@ U_BOOT_CMD(nand, CONFIG_SYS_MAXARGS, 1, do_nand,
 	"    bring nand to lock state or display locked pages\n"
 	"nand unlock [offset] [size] - unlock section"
 #endif
+#ifdef CONFIG_ENV_OFFSET_OOB
+	"\n"
+	"nand env.oob - environment offset in OOB of block 0 of"
+	"    first device.\n"
+	"nand env.oob set off|partition - set enviromnent offset\n"
+	"nand env.oob get - get environment offset"
+#endif
 );
 
 static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,