Command usage cleanup

Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 15 insertions, 15 deletions

diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index e2af030..a203e0d 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -1214,39 +1214,39 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 /**************************************************/
 U_BOOT_CMD(
 	md,	3,	1,	do_mem_md,
-	"md	- memory display\n",
+	"memory display",
 	"[.b, .w, .l] address [# of objects]\n	  - memory display\n"
 );
 
 
 U_BOOT_CMD(
 	mm,	2,	1,	do_mem_mm,
-	"mm	- memory modify (auto-incrementing)\n",
+	"memory modify (auto-incrementing)",
 	"[.b, .w, .l] address\n" "    - memory modify, auto increment address\n"
 );
 
 
 U_BOOT_CMD(
 	nm,	2,	1,	do_mem_nm,
-	"nm	- memory modify (constant address)\n",
+	"memory modify (constant address)",
 	"[.b, .w, .l] address\n    - memory modify, read and keep address\n"
 );
 
 U_BOOT_CMD(
 	mw,	4,	1,	do_mem_mw,
-	"mw	- memory write (fill)\n",
+	"memory write (fill)",
 	"[.b, .w, .l] address value [count]\n	- write memory\n"
 );
 
 U_BOOT_CMD(
 	cp,	4,	1,	do_mem_cp,
-	"cp	- memory copy\n",
+	"memory copy",
 	"[.b, .w, .l] source target count\n    - copy memory\n"
 );
 
 U_BOOT_CMD(
 	cmp,	4,	1,	do_mem_cmp,
-	"cmp	- memory compare\n",
+	"memory compare",
 	"[.b, .w, .l] addr1 addr2 count\n    - compare memory\n"
 );
 
@@ -1254,7 +1254,7 @@ U_BOOT_CMD(
 
 U_BOOT_CMD(
 	crc32,	4,	1,	do_mem_crc,
-	"crc32	- checksum calculation\n",
+	"checksum calculation",
 	"address count [addr]\n    - compute CRC32 checksum [save at addr]\n"
 );
 
@@ -1262,7 +1262,7 @@ U_BOOT_CMD(
 
 U_BOOT_CMD(
 	crc32,	5,	1,	do_mem_crc,
-	"crc32	- checksum calculation\n",
+	"checksum calculation",
 	"address count [addr]\n    - compute CRC32 checksum [save at addr]\n"
 	"-v address count crc\n    - verify crc of memory area\n"
 );
@@ -1271,14 +1271,14 @@ U_BOOT_CMD(
 
 U_BOOT_CMD(
 	base,	2,	1,	do_mem_base,
-	"base	- print or set address offset\n",
+	"print or set address offset",
 	"\n    - print address offset for memory commands\n"
 	"base off\n    - set address offset for memory commands to 'off'\n"
 );
 
 U_BOOT_CMD(
 	loop,	3,	1,	do_mem_loop,
-	"loop	- infinite loop on address range\n",
+	"infinite loop on address range",
 	"[.b, .w, .l] address number_of_objects\n"
 	"    - loop on a set of addresses\n"
 );
@@ -1286,7 +1286,7 @@ U_BOOT_CMD(
 #ifdef CONFIG_LOOPW
 U_BOOT_CMD(
 	loopw,	4,	1,	do_mem_loopw,
-	"loopw	- infinite write loop on address range\n",
+	"infinite write loop on address range",
 	"[.b, .w, .l] address number_of_objects data_to_write\n"
 	"    - loop on a set of addresses\n"
 );
@@ -1294,7 +1294,7 @@ U_BOOT_CMD(
 
 U_BOOT_CMD(
 	mtest,	5,	1,	do_mem_mtest,
-	"mtest   - simple RAM test\n",
+	"simple RAM test",
 	"[start [end [pattern [iterations]]]]\n"
 	"    - simple RAM read/write test\n"
 );
@@ -1302,13 +1302,13 @@ U_BOOT_CMD(
 #ifdef CONFIG_MX_CYCLIC
 U_BOOT_CMD(
 	mdc,	4,	1,	do_mem_mdc,
-	"mdc	- memory display cyclic\n",
+	"memory display cyclic",
 	"[.b, .w, .l] address count delay(ms)\n    - memory display cyclic\n"
 );
 
 U_BOOT_CMD(
 	mwc,	4,	1,	do_mem_mwc,
-	"mwc	- memory write cyclic\n",
+	"memory write cyclic",
 	"[.b, .w, .l] address value delay(ms)\n    - memory write cyclic\n"
 );
 #endif /* CONFIG_MX_CYCLIC */
@@ -1316,7 +1316,7 @@ U_BOOT_CMD(
 #ifdef CONFIG_CMD_UNZIP
 U_BOOT_CMD(
 	unzip,	4,	1,	do_unzip,
-	"unzip - unzip a memory region\n",
+	"unzip a memory region",
 	"srcaddr dstaddr [dstsize]\n"
 );
 #endif /* CONFIG_CMD_UNZIP */