summaryrefslogtreecommitdiff
path: root/common/cmd_i2c.c
diff options
context:
space:
mode:
authorBen Warren <bwarren@qstreams.com>2006-09-07 16:50:54 -0400
committerKim Phillips <kim.phillips@freescale.com>2006-11-03 19:42:19 -0600
commitbb99ad6d8257bf828f150d40f507b30d80a4a7ae (patch)
treeb097750e9e63f49186717a1eb4fcd078f65ae381 /common/cmd_i2c.c
parentbed85caf872714ebf53013967a695c9d63acfc68 (diff)
downloadu-boot-imx-bb99ad6d8257bf828f150d40f507b30d80a4a7ae.zip
u-boot-imx-bb99ad6d8257bf828f150d40f507b30d80a4a7ae.tar.gz
u-boot-imx-bb99ad6d8257bf828f150d40f507b30d80a4a7ae.tar.bz2
Add support for multiple I2C buses
Hello, Attached is a patch providing support for multiple I2C buses at the command level. The second part of the patch includes an implementation for the MPC834x CPU and MPC8349EMDS board. /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ Signed-off-by: Ben Warren <bwarren@qstreams.com> Overview: 1. Include new 'i2c' command (based on USB implementation) using CONFIG_I2C_CMD_TREE. 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that the commands to change bus number and speed are only available under the new 'i2c' command mentioned in the first bullet. 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form of an array of bus-device pairs. Otherwise, it is an array of uchar. CHANGELOG: Added new 'i2c' master command for all I2C interaction. This is conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for setting I2C bus speed as well as changing the active bus if the board has more than one (conditionally compiled with CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. Updated README. regards, Ben
Diffstat (limited to 'common/cmd_i2c.c')
-rw-r--r--common/cmd_i2c.c159
1 files changed, 154 insertions, 5 deletions
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index c543bb5..62378af 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -101,8 +101,31 @@ static uchar i2c_mm_last_chip;
static uint i2c_mm_last_addr;
static uint i2c_mm_last_alen;
+/* If only one I2C bus is present, the list of devices to ignore when
+ * the probe command is issued is represented by a 1D array of addresses.
+ * When multiple buses are present, the list is an array of bus-address
+ * pairs. The following macros take care of this */
+
#if defined(CFG_I2C_NOPROBES)
+#if defined(CONFIG_I2C_MULTI_BUS)
+static struct
+{
+ uchar bus;
+ uchar addr;
+} i2c_no_probes[] = CFG_I2C_NOPROBES;
+#define GET_BUS_NUM i2c_get_bus_num()
+#define COMPARE_BUS(b,i) (i2c_no_probes[(i)].bus == (b))
+#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)].addr == (a))
+#define NO_PROBE_ADDR(i) i2c_no_probes[(i)].addr
+#else /* single bus */
static uchar i2c_no_probes[] = CFG_I2C_NOPROBES;
+#define GET_BUS_NUM 0
+#define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */
+#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a))
+#define NO_PROBE_ADDR(i) i2c_no_probes[(i)]
+#endif /* CONFIG_MULTI_BUS */
+
+#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0]))
#endif
static int
@@ -538,14 +561,17 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
int j;
#if defined(CFG_I2C_NOPROBES)
int k, skip;
-#endif
+ uchar bus = GET_BUS_NUM;
+#endif /* NOPROBES */
puts ("Valid chip addresses:");
for(j = 0; j < 128; j++) {
#if defined(CFG_I2C_NOPROBES)
skip = 0;
- for (k = 0; k < sizeof(i2c_no_probes); k++){
- if (j == i2c_no_probes[k]){
+ for(k=0; k < NUM_ELEMENTS_NOPROBE; k++)
+ {
+ if(COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k))
+ {
skip = 1;
break;
}
@@ -561,8 +587,11 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
#if defined(CFG_I2C_NOPROBES)
puts ("Excluded chip addresses:");
- for( k = 0; k < sizeof(i2c_no_probes); k++ )
- printf(" %02X", i2c_no_probes[k] );
+ for(k=0; k < NUM_ELEMENTS_NOPROBE; k++)
+ {
+ if(COMPARE_BUS(bus,k))
+ printf(" %02X", NO_PROBE_ADDR(k));
+ }
putc ('\n');
#endif
@@ -873,6 +902,104 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
#endif /* CFG_CMD_SDRAM */
+#if defined(CONFIG_I2C_CMD_TREE)
+#if defined(CONFIG_I2C_MULTI_BUS)
+int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ int bus_idx, ret=0;
+
+ if (argc == 1) /* querying current setting */
+ {
+ printf("Current bus is %d\n", i2c_get_bus_num());
+ }
+ else
+ {
+ bus_idx = simple_strtoul(argv[1], NULL, 10);
+ printf("Setting bus to %d\n", bus_idx);
+ ret = i2c_set_bus_num(bus_idx);
+ if(ret)
+ {
+ printf("Failure changing bus number (%d)\n", ret);
+ }
+ }
+ return ret;
+}
+#endif /* CONFIG_I2C_MULTI_BUS */
+
+int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ int speed, ret=0;
+
+ if (argc == 1) /* querying current speed */
+ {
+ printf("Current bus speed=%d\n", i2c_get_bus_speed());
+ }
+ else
+ {
+ speed = simple_strtoul(argv[1], NULL, 10);
+ printf("Setting bus speed to %d Hz\n", speed);
+ ret = i2c_set_bus_speed(speed);
+ if(ret)
+ {
+ printf("Failure changing bus speed (%d)\n", ret);
+ }
+ }
+ return ret;
+}
+
+int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+#if defined(CONFIG_I2C_MULTI_BUS)
+ if(!strncmp(argv[1], "de", 2))
+ {
+ return do_i2c_bus_num(cmdtp, flag, --argc, ++argv);
+ }
+#endif /* CONFIG_I2C_MULTI_BUS */
+ if(!strncmp(argv[1], "sp", 2))
+ {
+ return do_i2c_bus_speed(cmdtp, flag, --argc, ++argv);
+ }
+ if(!strncmp(argv[1], "md", 2))
+ {
+ return do_i2c_md(cmdtp, flag, --argc, ++argv);
+ }
+ if(!strncmp(argv[1], "mm", 2))
+ {
+ return do_i2c_mm(cmdtp, flag, --argc, ++argv);
+ }
+ if(!strncmp(argv[1], "mw", 2))
+ {
+ return do_i2c_mw(cmdtp, flag, --argc, ++argv);
+ }
+ if(!strncmp(argv[1], "nm", 2))
+ {
+ return do_i2c_nm(cmdtp, flag, --argc, ++argv);
+ }
+ if(!strncmp(argv[1], "cr", 2))
+ {
+ return do_i2c_crc(cmdtp, flag, --argc, ++argv);
+ }
+ if(!strncmp(argv[1], "pr", 2))
+ {
+ return do_i2c_probe(cmdtp, flag, --argc, ++argv);
+ }
+ if(!strncmp(argv[1], "lo", 2))
+ {
+ return do_i2c_loop(cmdtp, flag, --argc, ++argv);
+ }
+#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
+ if(!strncmp(argv[1], "sd", 2))
+ {
+ return do_sdram(cmdtp, flag, --argc, ++argv);
+ }
+#endif /* CFG_CMD_SDRAM */
+ else
+ {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ }
+ return 0;
+}
+#endif /* CONFIG_I2C_CMD_TREE */
/***************************************************/
@@ -930,4 +1057,26 @@ U_BOOT_CMD(
" (valid chip values 50..57)\n"
);
#endif
+
+#if defined(CONFIG_I2C_CMD_TREE)
+U_BOOT_CMD(
+ i2c, 6, 1, do_i2c,
+ "i2c - I2C sub-system\n",
+#if defined(CONFIG_I2C_MULTI_BUS)
+ "dev [dev] - show or set current I2C bus\n"
+#endif /* CONFIG_I2C_MULTI_BUS */
+ "i2c speed [speed] - show or set I2C bus speed\n"
+ "i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
+ "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
+ "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
+ "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
+ "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
+ "i2c probe - show devices on the I2C bus\n"
+ "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
+#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
+ "i2c sdram chip - print SDRAM configuration information\n"
+#endif /* CFG_CMD_SDRAM */
+);
+#endif /* CONFIG_I2C_CMD_TREE */
+
#endif /* CFG_CMD_I2C */