rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 43 insertions, 43 deletions

diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 44d44fe..2451bef 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -32,8 +32,8 @@
  * Use the following configuration options to ensure no unneeded performance
  * degradation (typical for EEPROM) is incured for FRAM memory:
  *
- * #define CFG_I2C_FRAM
- * #undef CFG_EEPROM_PAGE_WRITE_DELAY_MS
+ * #define CONFIG_SYS_I2C_FRAM
+ * #undef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
  *
  */
 
@@ -47,12 +47,12 @@ extern int  eeprom_read  (unsigned dev_addr, unsigned offset,
 			  uchar *buffer, unsigned cnt);
 extern int  eeprom_write (unsigned dev_addr, unsigned offset,
 			  uchar *buffer, unsigned cnt);
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 extern int eeprom_write_enable (unsigned dev_addr, int state);
 #endif
 
 
-#if defined(CFG_EEPROM_X40430)
+#if defined(CONFIG_SYS_EEPROM_X40430)
 	/* Maximum number of times to poll for acknowledge after write */
 #define MAX_ACKNOWLEDGE_POLLS	10
 #endif
@@ -65,7 +65,7 @@ int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	const char *const fmt =
 		"\nEEPROM @0x%lX %s: addr %08lx  off %04lx  count %ld ... ";
 
-#if defined(CFG_I2C_MULTI_EEPROMS)
+#if defined(CONFIG_SYS_I2C_MULTI_EEPROMS)
 	if (argc == 6) {
 		ulong dev_addr = simple_strtoul (argv[2], NULL, 16);
 		ulong addr = simple_strtoul (argv[3], NULL, 16);
@@ -73,11 +73,11 @@ int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		ulong cnt  = simple_strtoul (argv[5], NULL, 16);
 #else
 	if (argc == 5) {
-		ulong dev_addr = CFG_DEF_EEPROM_ADDR;
+		ulong dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
 		ulong addr = simple_strtoul (argv[2], NULL, 16);
 		ulong off  = simple_strtoul (argv[3], NULL, 16);
 		ulong cnt  = simple_strtoul (argv[4], NULL, 16);
-#endif /* CFG_I2C_MULTI_EEPROMS */
+#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */
 
 # ifndef CONFIG_SPI
 		eeprom_init ();
@@ -111,16 +111,16 @@ int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 /*-----------------------------------------------------------------------
  *
- * for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
  *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
  *
- * for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
  *   0x00000nxx for EEPROM address selectors and page number at n.
  */
 
 #ifndef CONFIG_SPI
-#if !defined(CFG_I2C_EEPROM_ADDR_LEN) || CFG_I2C_EEPROM_ADDR_LEN < 1 || CFG_I2C_EEPROM_ADDR_LEN > 2
-#error CFG_I2C_EEPROM_ADDR_LEN must be 1 or 2
+#if !defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1 || CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2
+#error CONFIG_SYS_I2C_EEPROM_ADDR_LEN must be 1 or 2
 #endif
 #endif
 
@@ -136,11 +136,11 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
 	 */
 	while (offset < end) {
 		unsigned alen, len;
-#if !defined(CFG_I2C_FRAM)
+#if !defined(CONFIG_SYS_I2C_FRAM)
 		unsigned maxlen;
 #endif
 
-#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
 		uchar addr[2];
 
 		blk_off = offset & 0xFF;	/* block offset */
@@ -157,7 +157,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
 		addr[1] = offset >>  8;		/* upper address octet */
 		addr[2] = blk_off;		/* lower address octet */
 		alen	= 3;
-#endif	/* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+#endif	/* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
 
 		addr[0] |= dev_addr;		/* insert device address */
 
@@ -168,7 +168,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
 		 * bytes that can be ccessed with the single read or write
 		 * operation.
 		 */
-#if !defined(CFG_I2C_FRAM)
+#if !defined(CONFIG_SYS_I2C_FRAM)
 		maxlen = 0x100 - blk_off;
 		if (maxlen > I2C_RXTX_LEN)
 			maxlen = I2C_RXTX_LEN;
@@ -191,10 +191,10 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
 
 /*-----------------------------------------------------------------------
  *
- * for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
  *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
  *
- * for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
  *   0x00000nxx for EEPROM address selectors and page number at n.
  */
 
@@ -204,7 +204,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 	unsigned blk_off;
 	int rcode = 0;
 
-#if defined(CFG_EEPROM_X40430)
+#if defined(CONFIG_SYS_EEPROM_X40430)
 	uchar	contr_r_addr[2];
 	uchar	addr_void[2];
 	uchar	contr_reg[2];
@@ -212,7 +212,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 	int	i;
 #endif
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 	eeprom_write_enable (dev_addr,1);
 #endif
 	/* Write data until done or would cross a write page boundary.
@@ -222,11 +222,11 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 
 	while (offset < end) {
 		unsigned alen, len;
-#if !defined(CFG_I2C_FRAM)
+#if !defined(CONFIG_SYS_I2C_FRAM)
 		unsigned maxlen;
 #endif
 
-#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
 		uchar addr[2];
 
 		blk_off = offset & 0xFF;	/* block offset */
@@ -243,7 +243,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 		addr[1] = offset >>  8;		/* upper address octet */
 		addr[2] = blk_off;		/* lower address octet */
 		alen	= 3;
-#endif	/* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+#endif	/* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
 
 		addr[0] |= dev_addr;		/* insert device address */
 
@@ -254,11 +254,11 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 		 * bytes that can be ccessed with the single read or write
 		 * operation.
 		 */
-#if !defined(CFG_I2C_FRAM)
+#if !defined(CONFIG_SYS_I2C_FRAM)
 
-#if defined(CFG_EEPROM_PAGE_WRITE_BITS)
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)
 
-#define	EEPROM_PAGE_SIZE	(1 << CFG_EEPROM_PAGE_WRITE_BITS)
+#define	EEPROM_PAGE_SIZE	(1 << CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)
 #define	EEPROM_PAGE_OFFSET(x)	((x) & (EEPROM_PAGE_SIZE - 1))
 
 		maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off);
@@ -275,7 +275,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 #ifdef CONFIG_SPI
 		spi_write (addr, alen, buffer, len);
 #else
-#if defined(CFG_EEPROM_X40430)
+#if defined(CONFIG_SYS_EEPROM_X40430)
 		/* Get the value of the control register.
 		 * Set current address (internal pointer in the x40430)
 		 * to 0x1ff.
@@ -284,9 +284,9 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 		contr_r_addr[1] = 0xff;
 		addr_void[0]    = 0;
 		addr_void[1]    = addr[1];
-#ifdef CFG_I2C_EEPROM_ADDR
-		contr_r_addr[0] |= CFG_I2C_EEPROM_ADDR;
-		addr_void[0]    |= CFG_I2C_EEPROM_ADDR;
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
+		contr_r_addr[0] |= CONFIG_SYS_I2C_EEPROM_ADDR;
+		addr_void[0]    |= CONFIG_SYS_I2C_EEPROM_ADDR;
 #endif
 		contr_reg[0] = 0xff;
 		if (i2c_read (contr_r_addr[0], contr_r_addr[1], 1, contr_reg, 1) != 0) {
@@ -334,8 +334,8 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 			for (i = 0; i < MAX_ACKNOWLEDGE_POLLS; i++) {
 				if (i2c_read (addr_void[0], addr_void[1], 1, contr_reg, 1) == 0)
 					break;	/* got ack */
-#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
-				udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+				udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 			}
 			if (i == MAX_ACKNOWLEDGE_POLLS) {
@@ -364,11 +364,11 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 		buffer += len;
 		offset += len;
 
-#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
-		udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+		udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 	}
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 	eeprom_write_enable (dev_addr,0);
 #endif
 	return rcode;
@@ -382,11 +382,11 @@ eeprom_probe (unsigned dev_addr, unsigned offset)
 
 	/* Probe the chip address
 	 */
-#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
 	chip = offset >> 8;		/* block number */
 #else
 	chip = offset >> 16;		/* block number */
-#endif	/* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+#endif	/* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
 
 	chip |= dev_addr;		/* insert device address */
 
@@ -397,12 +397,12 @@ eeprom_probe (unsigned dev_addr, unsigned offset)
 /*-----------------------------------------------------------------------
  * Set default values
  */
-#ifndef	CFG_I2C_SPEED
-#define	CFG_I2C_SPEED	50000
+#ifndef	CONFIG_SYS_I2C_SPEED
+#define	CONFIG_SYS_I2C_SPEED	50000
 #endif
 
-#ifndef	CFG_I2C_SLAVE
-#define	CFG_I2C_SLAVE	0xFE
+#ifndef	CONFIG_SYS_I2C_SLAVE
+#define	CONFIG_SYS_I2C_SLAVE	0xFE
 #endif
 
 void eeprom_init  (void)
@@ -412,7 +412,7 @@ void eeprom_init  (void)
 #endif
 #if defined(CONFIG_HARD_I2C) || \
     defined(CONFIG_SOFT_I2C)
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 #endif
 }
 /*-----------------------------------------------------------------------
@@ -422,7 +422,7 @@ void eeprom_init  (void)
 
 #if defined(CONFIG_CMD_EEPROM)
 
-#ifdef CFG_I2C_MULTI_EEPROMS
+#ifdef CONFIG_SYS_I2C_MULTI_EEPROMS
 U_BOOT_CMD(
 	eeprom,	6,	1,	do_eeprom,
 	"eeprom  - EEPROM sub-system\n",
@@ -438,6 +438,6 @@ U_BOOT_CMD(
 	"eeprom write addr off cnt\n"
 	"       - read/write `cnt' bytes at EEPROM offset `off'\n"
 );
-#endif /* CFG_I2C_MULTI_EEPROMS */
+#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */
 
 #endif