CRAMFS: support cramfs in RAM

cramfsls and cramfsload are added to the command list.
A cramfs placed at 'cramfs_addr' can the be listed with 'cramfsls' and files
can be loaded with 'cramfsload'. 'cramfs_addr' is an environment variable
specifying the address the cramfs is located.
This works for powerpc and for ARM.

Use CONFIG_CMD_CRAMFS.

Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 216 insertions, 0 deletions

diff --git a/common/cmd_cramfs.c b/common/cmd_cramfs.c
new file mode 100644
index 0000000..55e2d36
--- /dev/null
+++ b/common/cmd_cramfs.c
@@ -0,0 +1,216 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * based on: cmd_jffs2.c
+ *
+ * 	Add support for a CRAMFS located in RAM
+ */
+
+
+/*
+ * CRAMFS support
+ */
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <linux/list.h>
+#include <linux/ctype.h>
+#include <jffs2/jffs2.h>
+#include <jffs2/load_kernel.h>
+#include <cramfs/cramfs_fs.h>
+
+/* enable/disable debugging messages */
+#define	DEBUG_CRAMFS
+#undef	DEBUG_CRAMFS
+
+#ifdef  DEBUG_CRAMFS
+# define DEBUGF(fmt, args...)	printf(fmt ,##args)
+#else
+# define DEBUGF(fmt, args...)
+#endif
+
+#ifdef CONFIG_CRAMFS_CMDLINE
+flash_info_t flash_info[1];
+
+#ifndef CONFIG_CMD_JFFS2
+#include <linux/stat.h>
+char *mkmodestr(unsigned long mode, char *str)
+{
+	static const char *l = "xwr";
+	int mask = 1, i;
+	char c;
+
+	switch (mode & S_IFMT) {
+		case S_IFDIR:    str[0] = 'd'; break;
+		case S_IFBLK:    str[0] = 'b'; break;
+		case S_IFCHR:    str[0] = 'c'; break;
+		case S_IFIFO:    str[0] = 'f'; break;
+		case S_IFLNK:    str[0] = 'l'; break;
+		case S_IFSOCK:   str[0] = 's'; break;
+		case S_IFREG:    str[0] = '-'; break;
+		default:         str[0] = '?';
+	}
+
+	for(i = 0; i < 9; i++) {
+		c = l[i%3];
+		str[9-i] = (mode & mask)?c:'-';
+		mask = mask<<1;
+	}
+
+	if(mode & S_ISUID) str[3] = (mode & S_IXUSR)?'s':'S';
+	if(mode & S_ISGID) str[6] = (mode & S_IXGRP)?'s':'S';
+	if(mode & S_ISVTX) str[9] = (mode & S_IXOTH)?'t':'T';
+	str[10] = '\0';
+	return str;
+}
+#endif /* CONFIG_CMD_JFFS2 */
+
+extern int cramfs_check (struct part_info *info);
+extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename);
+extern int cramfs_ls (struct part_info *info, char *filename);
+extern int cramfs_info (struct part_info *info);
+
+/***************************************************/
+/* U-boot commands				   */
+/***************************************************/
+
+/**
+ * Routine implementing fsload u-boot command. This routine tries to load
+ * a requested file from cramfs filesystem at location 'cramfsaddr'.
+ * cramfsaddr is an evironment variable.
+ *
+ * @param cmdtp command internal data
+ * @param flag command flag
+ * @param argc number of arguments supplied to the command
+ * @param argv arguments list
+ * @return 0 on success, 1 otherwise
+ */
+int do_cramfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	char *filename;
+	int size;
+	ulong offset = load_addr;
+
+	struct part_info part;
+	struct mtd_device dev;
+	struct mtdids id;
+
+	ulong addr;
+	addr = simple_strtoul(getenv("cramfsaddr"), NULL, 16);
+
+	/* hack! */
+	/* cramfs_* only supports NOR flash chips */
+	/* fake the device type */
+	id.type = MTD_DEV_TYPE_NOR;
+	id.num = 0;
+	dev.id = &id;
+	part.dev = &dev;
+	/* fake the address offset */
+	part.offset = addr - flash_info[id.num].start[0];
+
+	/* pre-set Boot file name */
+	if ((filename = getenv("bootfile")) == NULL) {
+		filename = "uImage";
+	}
+
+	if (argc == 2) {
+		filename = argv[1];
+	}
+	if (argc == 3) {
+		offset = simple_strtoul(argv[1], NULL, 0);
+		load_addr = offset;
+		filename = argv[2];
+	}
+
+	size = 0;
+	if (cramfs_check(&part))
+		size = cramfs_load ((char *) offset, &part, filename);
+
+	if (size > 0) {
+		char buf[10];
+		printf("### CRAMFS load complete: %d bytes loaded to 0x%lx\n",
+			size, offset);
+		sprintf(buf, "%x", size);
+		setenv("filesize", buf);
+	} else {
+		printf("### CRAMFS LOAD ERROR<%x> for %s!\n", size, filename);
+	}
+
+	return !(size > 0);
+}
+
+/**
+ * Routine implementing u-boot ls command which lists content of a given
+ * directory at location 'cramfsaddr'.
+ * cramfsaddr is an evironment variable.
+ *
+ * @param cmdtp command internal data
+ * @param flag command flag
+ * @param argc number of arguments supplied to the command
+ * @param argv arguments list
+ * @return 0 on success, 1 otherwise
+ */
+int do_cramfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	char *filename = "/";
+	int ret;
+	struct part_info part;
+	struct mtd_device dev;
+	struct mtdids id;
+
+	ulong addr;
+	addr = simple_strtoul(getenv("cramfsaddr"), NULL, 16);
+
+	/* hack! */
+	/* cramfs_* only supports NOR flash chips */
+	/* fake the device type */
+	id.type = MTD_DEV_TYPE_NOR;
+	id.num = 0;
+	dev.id = &id;
+	part.dev = &dev;
+	/* fake the address offset */
+	part.offset = addr - flash_info[id.num].start[0];
+
+	if (argc == 2)
+		filename = argv[1];
+
+	ret = 0;
+	if (cramfs_check(&part))
+		ret = cramfs_ls (&part, filename);
+
+	return ret ? 0 : 1;
+}
+
+/* command line only */
+
+/***************************************************/
+U_BOOT_CMD(
+	cramfsload,	3,	0,	do_cramfs_load,
+	"cramfsload\t- load binary file from a filesystem image",
+	"[ off ] [ filename ]\n"
+	"    - load binary file from address 'cramfsaddr'\n"
+	"      with offset 'off'\n"
+);
+U_BOOT_CMD(
+	cramfsls,	2,	1,	do_cramfs_ls,
+	"cramfsls\t- list files in a directory (default /)",
+	"[ directory ]\n"
+	"    - list files in a directory.\n"
+);
+
+#endif /* #ifdef CONFIG_CRAMFS_CMDLINE */
+
+/***************************************************/